Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
Meenakshi Aggarwal 3a187cff7a armv8: lx2162a: Add Soc changes to support LX2162A 
LX2162 is LX2160 based SoC, it has same die as of LX2160
with different packaging.

LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module,
microSD card, eMMC support, serial console, qspi nor flash, qsgmii,
sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes
interface to support three PCIe gen3 interface.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Fixed whitespace errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30

665 lines
16 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2016-2018, 2020 NXP
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <env.h>
#include <log.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <fsl-mc/ldpaa_wriop.h>
#ifdef CONFIG_SYS_FSL_SRDS_1
static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
int xfi_dpmac[XFI14 + 1];
int sgmii_dpmac[SGMII18 + 1];
int a25gaui_dpmac[_25GE10 + 1];
int xlaui_dpmac[_40GE2 + 1];
int caui2_dpmac[_50GE2 + 1];
int caui4_dpmac[_100GE2 + 1];
#else
int xfi_dpmac[XFI8 + 1];
int sgmii_dpmac[SGMII16 + 1];
#endif
#endif
__weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
{
return;
}
/*
*The return value of this func is the serdes protocol used.
*Typically this function is called number of times depending
*upon the number of serdes blocks in the Silicon.
*Zero is used to denote that no serdes was enabled,
*this is the case when golden RCW was used where DPAA2 bring was
*intentionally removed to achieve boot to prompt
*/
__weak int serdes_get_number(int serdes, int cfg)
{
return cfg;
}
int is_serdes_configured(enum srds_prtcl device)
{
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
if (!serdes1_prtcl_map[NONE])
fsl_serdes_init();
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
if (!serdes2_prtcl_map[NONE])
fsl_serdes_init();
ret |= serdes2_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
if (!serdes3_prtcl_map[NONE])
fsl_serdes_init();
ret |= serdes3_prtcl_map[device];
#endif
return !!ret;
}
int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg = 0;
int i;
switch (sd) {
#ifdef CONFIG_SYS_FSL_SRDS_1
case FSL_SRDS_1:
cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
cfg &= FSL_CHASSIS3_SRDS1_PRTCL_MASK;
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
break;
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
case FSL_SRDS_2:
cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
cfg &= FSL_CHASSIS3_SRDS2_PRTCL_MASK;
cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT;
break;
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
case NXP_SRDS_3:
cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
cfg &= FSL_CHASSIS3_SRDS3_PRTCL_MASK;
cfg >>= FSL_CHASSIS3_SRDS3_PRTCL_SHIFT;
break;
#endif
default:
printf("invalid SerDes%d\n", sd);
break;
}
cfg = serdes_get_number(sd, cfg);
/* Is serdes enabled at all? */
if (cfg == 0)
return -ENODEV;
for (i = 0; i < SRDS_MAX_LANES; i++) {
if (serdes_get_prtcl(sd, cfg, i) == device)
return i;
}
return -ENODEV;
}
void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
u32 sd_prctl_shift, u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg;
int lane;
if (serdes_prtcl_map[NONE])
return;
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
cfg >>= sd_prctl_shift;
cfg = serdes_get_number(sd, cfg);
printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
if (!is_serdes_prtcl_valid(sd, cfg))
printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
else {
serdes_prtcl_map[lane_prtcl] = 1;
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
wriop_init_dpmac(sd, sgmii_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
wriop_init_dpmac(sd, a25gaui_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
wriop_init_dpmac(sd, xlaui_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
wriop_init_dpmac(sd, caui2_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
wriop_init_dpmac(sd, caui4_dpmac[lane_prtcl],
(int)lane_prtcl);
#else
switch (lane_prtcl) {
case QSGMII_A:
case QSGMII_B:
case QSGMII_C:
case QSGMII_D:
wriop_init_dpmac_qsgmii(sd, (int)lane_prtcl);
break;
default:
if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
wriop_init_dpmac(sd,
xfi_dpmac[lane_prtcl],
(int)lane_prtcl);
if (lane_prtcl >= SGMII1 &&
lane_prtcl <= SGMII16)
wriop_init_dpmac(sd, sgmii_dpmac[
lane_prtcl],
(int)lane_prtcl);
break;
}
#endif
#endif
}
}
/* Set the first element to indicate serdes has been initialized */
serdes_prtcl_map[NONE] = 1;
}
__weak int get_serdes_volt(void)
{
return -1;
}
__weak int set_serdes_volt(int svdd)
{
return -1;
}
#define LNAGCR0_RT_RSTB 0x00600000
#define RSTCTL_RESET_MASK 0x000000E0
#define RSTCTL_RSTREQ 0x80000000
#define RSTCTL_RST_DONE 0x40000000
#define RSTCTL_RSTERR 0x20000000
#define RSTCTL_SDEN 0x00000020
#define RSTCTL_SDRST_B 0x00000040
#define RSTCTL_PLLRST_B 0x00000080
#define TCALCR_CALRST_B 0x08000000
struct serdes_prctl_info {
u32 id;
u32 mask;
u32 shift;
};
struct serdes_prctl_info srds_prctl_info[] = {
#ifdef CONFIG_SYS_FSL_SRDS_1
{.id = 1,
.mask = FSL_CHASSIS3_SRDS1_PRTCL_MASK,
.shift = FSL_CHASSIS3_SRDS1_PRTCL_SHIFT
},
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
{.id = 2,
.mask = FSL_CHASSIS3_SRDS2_PRTCL_MASK,
.shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT
},
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
{.id = 3,
.mask = FSL_CHASSIS3_SRDS3_PRTCL_MASK,
.shift = FSL_CHASSIS3_SRDS3_PRTCL_SHIFT
},
#endif
{} /* NULL ENTRY */
};
static int get_serdes_prctl_info_idx(u32 serdes_id)
{
int pos = 0;
struct serdes_prctl_info *srds_info;
/* loop until NULL ENTRY defined by .id=0 */
for (srds_info = srds_prctl_info; srds_info->id != 0;
srds_info++, pos++) {
if (srds_info->id == serdes_id)
return pos;
}
return -1;
}
static void do_enabled_lanes_reset(u32 serdes_id, u32 cfg,
struct ccsr_serdes __iomem *serdes_base,
bool cmplt)
{
int i, pos;
u32 cfg_tmp;
pos = get_serdes_prctl_info_idx(serdes_id);
if (pos == -1) {
printf("invalid serdes_id %d\n", serdes_id);
return;
}
cfg_tmp = cfg & srds_prctl_info[pos].mask;
cfg_tmp >>= srds_prctl_info[pos].shift;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
if (cmplt)
setbits_le32(&serdes_base->lane[i].gcr0,
LNAGCR0_RT_RSTB);
else
clrbits_le32(&serdes_base->lane[i].gcr0,
LNAGCR0_RT_RSTB);
}
}
static void do_pll_reset(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
clrbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RESET_MASK);
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RSTREQ);
}
udelay(1);
}
static void do_rx_tx_cal_reset(struct ccsr_serdes __iomem *serdes_base)
{
clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
}
static void do_rx_tx_cal_reset_comp(u32 cfg, int i,
struct ccsr_serdes __iomem *serdes_base)
{
if (!(cfg == 0x3 && i == 1)) {
udelay(1);
setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B);
}
udelay(1);
}
static void do_pll_reset_done(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
u32 reg = 0;
for (i = 0; i < 2; i++) {
reg = in_le32(&serdes_base->bank[i].pllcr0);
if (!(cfg & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RST_DONE);
}
}
}
static void do_serdes_enable(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_SDEN);
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_PLLRST_B);
udelay(1);
/* Take the Rx/Tx calibration out of reset */
do_rx_tx_cal_reset_comp(cfg, i, serdes_base);
}
}
static void do_pll_lock(u32 cfg,
struct ccsr_serdes __iomem *serdes_base)
{
int i;
u32 reg = 0;
for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) {
/* if the PLL is not locked, set RST_ERR */
reg = in_le32(&serdes_base->bank[i].pllcr0);
if (!((reg >> 23) & 0x1)) {
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_RSTERR);
} else {
udelay(1);
setbits_le32(&serdes_base->bank[i].rstctl,
RSTCTL_SDRST_B);
udelay(1);
}
}
}
int setup_serdes_volt(u32 svdd)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
struct ccsr_serdes __iomem *serdes1_base =
(void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR;
u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
#ifdef CONFIG_SYS_FSL_SRDS_2
struct ccsr_serdes __iomem *serdes2_base =
(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
struct ccsr_serdes __iomem *serdes3_base =
(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000);
u32 cfg_rcwsrds3 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
#endif
u32 cfg_tmp;
int svdd_cur, svdd_tar;
int ret = 1;
/* Only support switch SVDD to 900mV */
if (svdd != 900)
return -EINVAL;
/* Scale up to the LTC resolution is 1/4096V */
svdd = (svdd * 4096) / 1000;
svdd_tar = svdd;
svdd_cur = get_serdes_volt();
if (svdd_cur < 0)
return -EINVAL;
debug("%s: current SVDD: %x; target SVDD: %x\n",
__func__, svdd_cur, svdd_tar);
if (svdd_cur == svdd_tar)
return 0;
/* Put the all enabled lanes in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, false);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, false);
#endif
/* Put the all enabled PLL in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_reset(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_reset(cfg_tmp, serdes2_base);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
cfg_tmp = cfg_rcwsrds3 & 0x30;
cfg_tmp >>= 4;
do_pll_reset(cfg_tmp, serdes3_base);
#endif
/* Put the Rx/Tx calibration into reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_rx_tx_cal_reset(serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_rx_tx_cal_reset(serdes2_base);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
do_rx_tx_cal_reset(serdes3_base);
#endif
ret = set_serdes_volt(svdd);
if (ret < 0) {
printf("could not change SVDD\n");
ret = -1;
}
/* For each PLL that’s not disabled via RCW enable the SERDES */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_serdes_enable(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_serdes_enable(cfg_tmp, serdes2_base);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
cfg_tmp = cfg_rcwsrds3 & 0x30;
cfg_tmp >>= 4;
do_serdes_enable(cfg_tmp, serdes3_base);
#endif
/* Wait for at at least 625us, ensure the PLLs being reset are locked */
udelay(800);
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_lock(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_lock(cfg_tmp, serdes2_base);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
cfg_tmp = cfg_rcwsrds3 & 0x30;
cfg_tmp >>= 4;
do_pll_lock(cfg_tmp, serdes3_base);
#endif
/* Take the all enabled lanes out of reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, true);
#endif
/* For each PLL being reset, and achieved PLL lock set RST_DONE */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_pll_reset_done(cfg_tmp, serdes1_base);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcwsrds1 & 0xC;
cfg_tmp >>= 2;
do_pll_reset_done(cfg_tmp, serdes2_base);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
cfg_tmp = cfg_rcwsrds3 & 0x30;
cfg_tmp >>= 4;
do_pll_reset_done(cfg_tmp, serdes3_base);
#endif
return ret;
}
void fsl_serdes_init(void)
{
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
int i , j;
#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A)
for (i = XFI1, j = 1; i <= XFI14; i++, j++)
xfi_dpmac[i] = j;
for (i = SGMII1, j = 1; i <= SGMII18; i++, j++)
sgmii_dpmac[i] = j;
for (i = _25GE1, j = 1; i <= _25GE10; i++, j++)
a25gaui_dpmac[i] = j;
for (i = _40GE1, j = 1; i <= _40GE2; i++, j++)
xlaui_dpmac[i] = j;
for (i = _50GE1, j = 1; i <= _50GE2; i++, j++)
caui2_dpmac[i] = j;
for (i = _100GE1, j = 1; i <= _100GE2; i++, j++)
caui4_dpmac[i] = j;
#else
for (i = XFI1, j = 1; i <= XFI8; i++, j++)
xfi_dpmac[i] = j;
for (i = SGMII1, j = 1; i <= SGMII16; i++, j++)
sgmii_dpmac[i] = j;
#endif
#endif
#ifdef CONFIG_SYS_FSL_SRDS_1
serdes_init(FSL_SRDS_1,
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
FSL_CHASSIS3_SRDS1_REGSR,
FSL_CHASSIS3_SRDS1_PRTCL_MASK,
FSL_CHASSIS3_SRDS1_PRTCL_SHIFT,
serdes1_prtcl_map);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
serdes_init(FSL_SRDS_2,
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
FSL_CHASSIS3_SRDS2_REGSR,
FSL_CHASSIS3_SRDS2_PRTCL_MASK,
FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
serdes2_prtcl_map);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
serdes_init(NXP_SRDS_3,
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000,
FSL_CHASSIS3_SRDS3_REGSR,
FSL_CHASSIS3_SRDS3_PRTCL_MASK,
FSL_CHASSIS3_SRDS3_PRTCL_SHIFT,
serdes3_prtcl_map);
#endif
}
int serdes_set_env(int sd, int rcwsr, int sd_prctl_mask, int sd_prctl_shift)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
char scfg[16], snum[16];
int cfgr = 0;
u32 cfg;
cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
cfg >>= sd_prctl_shift;
cfg = serdes_get_number(sd, cfg);
#if defined(SRDS_BITS_PER_LANE)
/*
* reverse lanes, lane 0 should be printed first so it must be moved to
* high order bits.
* For example bb58 should read 85bb, lane 0 being protocol 8.
* This only applies to SoCs that define SRDS_BITS_PER_LANE and have
* independent per-lane protocol configuration, at this time LS1028A and
* LS1088A. LS2 and LX2 SoCs encode the full protocol mix across all
* lanes as a single value.
*/
for (int i = 0; i < SRDS_MAX_LANES; i++) {
int tmp;
tmp = cfg >> (i * SRDS_BITS_PER_LANE);
tmp &= GENMASK(SRDS_BITS_PER_LANE - 1, 0);
tmp <<= (SRDS_MAX_LANES - i - 1) * SRDS_BITS_PER_LANE;
cfgr |= tmp;
}
#endif /* SRDS_BITS_PER_LANE */
snprintf(snum, 16, "serdes%d", sd);
snprintf(scfg, 16, "%x", cfgr);
env_set(snum, scfg);
return 0;
}
int serdes_misc_init(void)
{
#ifdef CONFIG_SYS_FSL_SRDS_1
serdes_set_env(FSL_SRDS_1, FSL_CHASSIS3_SRDS1_REGSR,
FSL_CHASSIS3_SRDS1_PRTCL_MASK,
FSL_CHASSIS3_SRDS1_PRTCL_SHIFT);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
serdes_set_env(FSL_SRDS_2, FSL_CHASSIS3_SRDS2_REGSR,
FSL_CHASSIS3_SRDS2_PRTCL_MASK,
FSL_CHASSIS3_SRDS2_PRTCL_SHIFT);
#endif
#ifdef CONFIG_SYS_NXP_SRDS_3
serdes_set_env(NXP_SRDS_3, FSL_CHASSIS3_SRDS3_REGSR,
FSL_CHASSIS3_SRDS3_PRTCL_MASK,
FSL_CHASSIS3_SRDS3_PRTCL_SHIFT);
#endif
return 0;
}
Reference in a new issue View git blame Copy permalink