mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
2226ca1734
Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
318 lines
7.1 KiB
Text
318 lines
7.1 KiB
Text
if ARCH_MVEBU
|
|
|
|
config HAVE_MVEBU_EFUSE
|
|
bool
|
|
default n
|
|
|
|
config ARMADA_32BIT
|
|
bool
|
|
select ARCH_MISC_INIT
|
|
select BOARD_EARLY_INIT_F
|
|
select CPU_V7A
|
|
select SPL_DM if SPL
|
|
select SPL_DM_SEQ_ALIAS if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select SPL_SIMPLE_BUS if SPL
|
|
select SUPPORT_SPL
|
|
select TRANSLATION_OFFSET
|
|
|
|
config ARMADA_64BIT
|
|
bool
|
|
select ARM64
|
|
|
|
# ARMv7 SoCs...
|
|
config ARMADA_375
|
|
bool
|
|
select ARMADA_32BIT
|
|
|
|
config ARMADA_38X
|
|
bool
|
|
select ARMADA_32BIT
|
|
select HAVE_MVEBU_EFUSE
|
|
|
|
config ARMADA_38X_HS_IMPEDANCE_THRESH
|
|
hex "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)"
|
|
depends on ARMADA_38X
|
|
default 0x6
|
|
range 0x0 0x7
|
|
|
|
config ARMADA_XP
|
|
bool
|
|
select ARMADA_32BIT
|
|
|
|
# ARMv8 SoCs...
|
|
config ARMADA_3700
|
|
bool
|
|
select ARM64
|
|
|
|
# Armada 7K and 8K are very similar - use only one Kconfig symbol for both
|
|
config ARMADA_8K
|
|
bool
|
|
select ARM64
|
|
|
|
# Armada PLL frequency (used for NAND clock generation)
|
|
config SYS_MVEBU_PLL_CLOCK
|
|
int
|
|
default "2000000000" if ARMADA_XP || ARMADA_3700 || ARMADA_8K || ARMADA_MSYS
|
|
default "1000000000" if ARMADA_38X || ARMADA_375
|
|
|
|
# Armada XP/38x SoC types...
|
|
config MV78230
|
|
bool
|
|
select ARMADA_XP
|
|
|
|
config MV78260
|
|
bool
|
|
select ARMADA_XP
|
|
imply CMD_SATA
|
|
|
|
config MV78460
|
|
bool
|
|
select ARMADA_XP
|
|
|
|
config ARMADA_MSYS
|
|
bool
|
|
select ARMADA_32BIT
|
|
|
|
config 98DX4251
|
|
bool
|
|
select ARMADA_MSYS
|
|
|
|
config 98DX3336
|
|
bool
|
|
select ARMADA_MSYS
|
|
|
|
config 98DX3236
|
|
bool
|
|
select ARMADA_MSYS
|
|
|
|
config 88F6820
|
|
bool
|
|
select ARMADA_38X
|
|
|
|
choice
|
|
prompt "Armada XP/375/38x/3700/7K/8K board select"
|
|
optional
|
|
|
|
config TARGET_CLEARFOG
|
|
bool "Support ClearFog"
|
|
select 88F6820
|
|
select BOARD_LATE_INIT
|
|
|
|
config TARGET_HELIOS4
|
|
bool "Support Helios4"
|
|
select 88F6820
|
|
|
|
config TARGET_MVEBU_ARMADA_37XX
|
|
bool "Support Armada 37xx platforms"
|
|
select ARMADA_3700
|
|
imply SCSI
|
|
|
|
config TARGET_DB_88F6720
|
|
bool "Support DB-88F6720 Armada 375"
|
|
select ARMADA_375
|
|
|
|
config TARGET_DB_88F6820_GP
|
|
bool "Support DB-88F6820-GP"
|
|
select 88F6820
|
|
|
|
config TARGET_DB_88F6820_AMC
|
|
bool "Support DB-88F6820-AMC"
|
|
select 88F6820
|
|
|
|
config TARGET_TURRIS_OMNIA
|
|
bool "Support Turris Omnia"
|
|
select 88F6820
|
|
select BOARD_LATE_INIT
|
|
select DM_I2C
|
|
select I2C_MUX
|
|
select I2C_MUX_PCA954x
|
|
select SPL_I2C_MUX
|
|
select SYS_I2C_MVTWSI
|
|
select ATSHA204A
|
|
|
|
config TARGET_TURRIS_MOX
|
|
bool "Support Turris Mox"
|
|
select ARMADA_3700
|
|
|
|
config TARGET_MVEBU_ARMADA_8K
|
|
bool "Support Armada 7k/8k platforms"
|
|
select ARMADA_8K
|
|
select BOARD_LATE_INIT
|
|
imply SCSI
|
|
|
|
config TARGET_OCTEONTX2_CN913x
|
|
bool "Support CN913x platforms"
|
|
select ARMADA_8K
|
|
imply BOARD_EARLY_INIT_R
|
|
select BOARD_LATE_INIT
|
|
imply SCSI
|
|
|
|
config TARGET_DB_MV784MP_GP
|
|
bool "Support db-mv784mp-gp"
|
|
select MV78460
|
|
|
|
config TARGET_DS414
|
|
bool "Support Synology DS414"
|
|
select MV78230
|
|
|
|
config TARGET_MAXBCM
|
|
bool "Support maxbcm"
|
|
select MV78460
|
|
|
|
config TARGET_THEADORABLE
|
|
bool "Support theadorable Armada XP"
|
|
select BOARD_LATE_INIT if USB
|
|
select MV78260
|
|
imply CMD_SATA
|
|
|
|
config TARGET_CONTROLCENTERDC
|
|
bool "Support CONTROLCENTERDC"
|
|
select 88F6820
|
|
|
|
config TARGET_X530
|
|
bool "Support Allied Telesis x530"
|
|
select 88F6820
|
|
|
|
config TARGET_DB_XC3_24G4XG
|
|
bool "Support DB-XC3-24G4XG"
|
|
select 98DX3336
|
|
|
|
config TARGET_CRS3XX_98DX3236
|
|
bool "Support CRS3XX-98DX3236"
|
|
select 98DX3236
|
|
|
|
endchoice
|
|
|
|
config SYS_BOARD
|
|
default "clearfog" if TARGET_CLEARFOG
|
|
default "helios4" if TARGET_HELIOS4
|
|
default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX
|
|
default "db-88f6720" if TARGET_DB_88F6720
|
|
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
|
default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
|
|
default "turris_omnia" if TARGET_TURRIS_OMNIA
|
|
default "turris_mox" if TARGET_TURRIS_MOX
|
|
default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
|
|
default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x
|
|
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
|
default "ds414" if TARGET_DS414
|
|
default "maxbcm" if TARGET_MAXBCM
|
|
default "theadorable" if TARGET_THEADORABLE
|
|
default "a38x" if TARGET_CONTROLCENTERDC
|
|
default "x530" if TARGET_X530
|
|
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
|
|
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
|
|
|
|
config SYS_CONFIG_NAME
|
|
default "clearfog" if TARGET_CLEARFOG
|
|
default "helios4" if TARGET_HELIOS4
|
|
default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX
|
|
default "db-88f6720" if TARGET_DB_88F6720
|
|
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
|
|
default "db-88f6820-amc" if TARGET_DB_88F6820_AMC
|
|
default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
|
|
default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x
|
|
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
|
default "ds414" if TARGET_DS414
|
|
default "maxbcm" if TARGET_MAXBCM
|
|
default "theadorable" if TARGET_THEADORABLE
|
|
default "turris_omnia" if TARGET_TURRIS_OMNIA
|
|
default "turris_mox" if TARGET_TURRIS_MOX
|
|
default "controlcenterdc" if TARGET_CONTROLCENTERDC
|
|
default "x530" if TARGET_X530
|
|
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
|
|
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
|
|
|
|
config SYS_VENDOR
|
|
default "Marvell" if TARGET_DB_MV784MP_GP
|
|
default "Marvell" if TARGET_MVEBU_ARMADA_37XX
|
|
default "Marvell" if TARGET_DB_88F6720
|
|
default "Marvell" if TARGET_DB_88F6820_GP
|
|
default "Marvell" if TARGET_DB_88F6820_AMC
|
|
default "Marvell" if TARGET_MVEBU_ARMADA_8K
|
|
default "Marvell" if TARGET_OCTEONTX2_CN913x
|
|
default "Marvell" if TARGET_DB_XC3_24G4XG
|
|
default "Marvell" if TARGET_MVEBU_DB_88F7040
|
|
default "solidrun" if TARGET_CLEARFOG
|
|
default "kobol" if TARGET_HELIOS4
|
|
default "Synology" if TARGET_DS414
|
|
default "CZ.NIC" if TARGET_TURRIS_OMNIA
|
|
default "CZ.NIC" if TARGET_TURRIS_MOX
|
|
default "gdsys" if TARGET_CONTROLCENTERDC
|
|
default "alliedtelesis" if TARGET_X530
|
|
default "mikrotik" if TARGET_CRS3XX_98DX3236
|
|
|
|
config SYS_SOC
|
|
default "mvebu"
|
|
|
|
choice
|
|
prompt "Boot method"
|
|
depends on SPL
|
|
|
|
config MVEBU_SPL_BOOT_DEVICE_SPI
|
|
bool "SPI NOR flash"
|
|
imply ENV_IS_IN_SPI_FLASH
|
|
imply SPL_DM_SPI
|
|
imply SPL_SPI_FLASH_SUPPORT
|
|
imply SPL_SPI_LOAD
|
|
imply SPL_SPI_SUPPORT
|
|
select SPL_BOOTROM_SUPPORT
|
|
|
|
config MVEBU_SPL_BOOT_DEVICE_MMC
|
|
bool "SDIO/MMC card"
|
|
imply ENV_IS_IN_MMC
|
|
# GPIO needed for eMMC/SD card presence detection
|
|
imply SPL_DM_GPIO
|
|
imply SPL_DM_MMC
|
|
imply SPL_GPIO
|
|
imply SPL_LIBDISK_SUPPORT
|
|
imply SPL_MMC_SUPPORT
|
|
select SPL_BOOTROM_SUPPORT
|
|
|
|
config MVEBU_SPL_BOOT_DEVICE_SATA
|
|
bool "SATA"
|
|
imply SPL_SATA_SUPPORT
|
|
imply SPL_LIBDISK_SUPPORT
|
|
select SPL_BOOTROM_SUPPORT
|
|
|
|
config MVEBU_SPL_BOOT_DEVICE_UART
|
|
bool "UART"
|
|
select SPL_BOOTROM_SUPPORT
|
|
|
|
endchoice
|
|
|
|
config MVEBU_EFUSE
|
|
bool "Enable eFuse support"
|
|
default n
|
|
depends on HAVE_MVEBU_EFUSE
|
|
help
|
|
Enable support for reading and writing eFuses on mvebu SoCs.
|
|
|
|
config MVEBU_EFUSE_FAKE
|
|
bool "Fake eFuse access (dry run)"
|
|
default n
|
|
depends on MVEBU_EFUSE
|
|
help
|
|
This enables a "dry run" mode where eFuses are not really programmed.
|
|
Instead the eFuse accesses are emulated by writing to and reading
|
|
from a memory block.
|
|
This is can be used for testing prog scripts.
|
|
|
|
config SECURED_MODE_IMAGE
|
|
bool "Build image for trusted boot"
|
|
default false
|
|
depends on 88F6820
|
|
help
|
|
Build an image that employs the ARMADA SoC's trusted boot framework
|
|
for securely booting images.
|
|
|
|
config SECURED_MODE_CSK_INDEX
|
|
int "Index of active CSK"
|
|
default 0
|
|
depends on SECURED_MODE_IMAGE
|
|
|
|
source "board/solidrun/clearfog/Kconfig"
|
|
source "board/kobol/helios4/Kconfig"
|
|
|
|
endif
|