mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
da91cfed54
Flush operations need to be cacheline aligned to take effect, make sure to flush always complete cachelines. This avoids messages such as: CACHE: Misaligned operation at range [00900000, 009004d9] Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
144 lines
3.7 KiB
C
144 lines
3.7 KiB
C
/*
|
|
* (C) Copyright 2013
|
|
* Andre Przywara, Linaro <andre.przywara@linaro.org>
|
|
*
|
|
* Routines to transition ARMv7 processors from secure into non-secure state
|
|
* and from non-secure SVC into HYP mode
|
|
* needed to enable ARMv7 virtualization for current hypervisors
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/gic.h>
|
|
#include <asm/io.h>
|
|
#include <asm/secure.h>
|
|
|
|
static unsigned int read_id_pfr1(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
asm("mrc p15, 0, %0, c0, c1, 1\n" : "=r"(reg));
|
|
return reg;
|
|
}
|
|
|
|
static unsigned long get_gicd_base_address(void)
|
|
{
|
|
#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
|
|
return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
|
|
#else
|
|
unsigned periphbase;
|
|
|
|
/* get the GIC base address from the CBAR register */
|
|
asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
|
|
|
|
/* the PERIPHBASE can be mapped above 4 GB (lower 8 bits used to
|
|
* encode this). Bail out here since we cannot access this without
|
|
* enabling paging.
|
|
*/
|
|
if ((periphbase & 0xff) != 0) {
|
|
printf("nonsec: PERIPHBASE is above 4 GB, no access.\n");
|
|
return -1;
|
|
}
|
|
|
|
return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
|
|
#endif
|
|
}
|
|
|
|
/* Define a specific version of this function to enable any available
|
|
* hardware protections for the reserved region */
|
|
void __weak protect_secure_section(void) {}
|
|
|
|
static void relocate_secure_section(void)
|
|
{
|
|
#ifdef CONFIG_ARMV7_SECURE_BASE
|
|
size_t sz = __secure_end - __secure_start;
|
|
unsigned long szflush = ALIGN(sz + 1, CONFIG_SYS_CACHELINE_SIZE);
|
|
|
|
memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
|
|
|
|
flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
|
|
CONFIG_ARMV7_SECURE_BASE + szflush);
|
|
protect_secure_section();
|
|
invalidate_icache_all();
|
|
#endif
|
|
}
|
|
|
|
static void kick_secondary_cpus_gic(unsigned long gicdaddr)
|
|
{
|
|
/* kick all CPUs (except this one) by writing to GICD_SGIR */
|
|
writel(1U << 24, gicdaddr + GICD_SGIR);
|
|
}
|
|
|
|
void __weak smp_kick_all_cpus(void)
|
|
{
|
|
unsigned long gic_dist_addr;
|
|
|
|
gic_dist_addr = get_gicd_base_address();
|
|
if (gic_dist_addr == -1)
|
|
return;
|
|
|
|
kick_secondary_cpus_gic(gic_dist_addr);
|
|
}
|
|
|
|
__weak void psci_board_init(void)
|
|
{
|
|
}
|
|
|
|
int armv7_init_nonsec(void)
|
|
{
|
|
unsigned int reg;
|
|
unsigned itlinesnr, i;
|
|
unsigned long gic_dist_addr;
|
|
|
|
/* check whether the CPU supports the security extensions */
|
|
reg = read_id_pfr1();
|
|
if ((reg & 0xF0) == 0) {
|
|
printf("nonsec: Security extensions not implemented.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* the SCR register will be set directly in the monitor mode handler,
|
|
* according to the spec one should not tinker with it in secure state
|
|
* in SVC mode. Do not try to read it once in non-secure state,
|
|
* any access to it will trap.
|
|
*/
|
|
|
|
gic_dist_addr = get_gicd_base_address();
|
|
if (gic_dist_addr == -1)
|
|
return -1;
|
|
|
|
/* enable the GIC distributor */
|
|
writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
|
|
gic_dist_addr + GICD_CTLR);
|
|
|
|
/* TYPER[4:0] contains an encoded number of available interrupts */
|
|
itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
|
|
|
|
/* set all bits in the GIC group registers to one to allow access
|
|
* from non-secure state. The first 32 interrupts are private per
|
|
* CPU and will be set later when enabling the GIC for each core
|
|
*/
|
|
for (i = 1; i <= itlinesnr; i++)
|
|
writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
|
|
|
|
psci_board_init();
|
|
|
|
/*
|
|
* Relocate secure section before any cpu runs in secure ram.
|
|
* smp_kick_all_cpus may enable other cores and runs into secure
|
|
* ram, so need to relocate secure section before enabling other
|
|
* cores.
|
|
*/
|
|
relocate_secure_section();
|
|
|
|
#ifndef CONFIG_ARMV7_PSCI
|
|
smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
|
|
smp_kick_all_cpus();
|
|
#endif
|
|
|
|
/* call the non-sec switching code on this CPU also */
|
|
secure_ram_addr(_nonsec_init)();
|
|
return 0;
|
|
}
|