mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
61708bb0a2
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs(). Add new spi_get_bus_and_cs() implementation which rely on DT for speed and mode and don't need any drv_name nor dev_name parameters. This will prepare the ground for next patch. Update all callers to use _spi_get_bus_and_cs() to keep the same behavior. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: "Pali Rohár" <pali@kernel.org> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Anji J <anji.jagarlmudi@nxp.com> Cc: Biwen Li <biwen.li@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
875 lines
20 KiB
C
875 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <common.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/list.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <dm.h>
|
|
#include <g_dnl.h>
|
|
|
|
#define MAX3420_MAX_EPS 4
|
|
#define EP_MAX_PACKET 64 /* Same for all Endpoints */
|
|
#define EPNAME_SIZE 16 /* Buffer size for endpoint name */
|
|
|
|
#define MAX3420_SPI_DIR_RD 0 /* read register from MAX3420 */
|
|
#define MAX3420_SPI_DIR_WR 1 /* write register to MAX3420 */
|
|
|
|
/* SPI commands: */
|
|
#define MAX3420_SPI_ACK_MASK BIT(0)
|
|
#define MAX3420_SPI_DIR_MASK BIT(1)
|
|
#define MAX3420_SPI_REG_MASK GENMASK(7, 3)
|
|
|
|
#define MAX3420_REG_EP0FIFO 0
|
|
#define MAX3420_REG_EP1FIFO 1
|
|
#define MAX3420_REG_EP2FIFO 2
|
|
#define MAX3420_REG_EP3FIFO 3
|
|
#define MAX3420_REG_SUDFIFO 4
|
|
#define MAX3420_REG_EP0BC 5
|
|
#define MAX3420_REG_EP1BC 6
|
|
#define MAX3420_REG_EP2BC 7
|
|
#define MAX3420_REG_EP3BC 8
|
|
|
|
#define MAX3420_REG_EPSTALLS 9
|
|
#define bACKSTAT BIT(6)
|
|
#define bSTLSTAT BIT(5)
|
|
#define bSTLEP3IN BIT(4)
|
|
#define bSTLEP2IN BIT(3)
|
|
#define bSTLEP1OUT BIT(2)
|
|
#define bSTLEP0OUT BIT(1)
|
|
#define bSTLEP0IN BIT(0)
|
|
|
|
#define MAX3420_REG_CLRTOGS 10
|
|
#define bEP3DISAB BIT(7)
|
|
#define bEP2DISAB BIT(6)
|
|
#define bEP1DISAB BIT(5)
|
|
#define bCTGEP3IN BIT(4)
|
|
#define bCTGEP2IN BIT(3)
|
|
#define bCTGEP1OUT BIT(2)
|
|
|
|
#define MAX3420_REG_EPIRQ 11
|
|
#define MAX3420_REG_EPIEN 12
|
|
#define bSUDAVIRQ BIT(5)
|
|
#define bIN3BAVIRQ BIT(4)
|
|
#define bIN2BAVIRQ BIT(3)
|
|
#define bOUT1DAVIRQ BIT(2)
|
|
#define bOUT0DAVIRQ BIT(1)
|
|
#define bIN0BAVIRQ BIT(0)
|
|
|
|
#define MAX3420_REG_USBIRQ 13
|
|
#define MAX3420_REG_USBIEN 14
|
|
#define bOSCOKIRQ BIT(0)
|
|
#define bRWUDNIRQ BIT(1)
|
|
#define bBUSACTIRQ BIT(2)
|
|
#define bURESIRQ BIT(3)
|
|
#define bSUSPIRQ BIT(4)
|
|
#define bNOVBUSIRQ BIT(5)
|
|
#define bVBUSIRQ BIT(6)
|
|
#define bURESDNIRQ BIT(7)
|
|
|
|
#define MAX3420_REG_USBCTL 15
|
|
#define bHOSCSTEN BIT(7)
|
|
#define bVBGATE BIT(6)
|
|
#define bCHIPRES BIT(5)
|
|
#define bPWRDOWN BIT(4)
|
|
#define bCONNECT BIT(3)
|
|
#define bSIGRWU BIT(2)
|
|
|
|
#define MAX3420_REG_CPUCTL 16
|
|
#define bIE BIT(0)
|
|
|
|
#define MAX3420_REG_PINCTL 17
|
|
#define bEP3INAK BIT(7)
|
|
#define bEP2INAK BIT(6)
|
|
#define bEP0INAK BIT(5)
|
|
#define bFDUPSPI BIT(4)
|
|
#define bINTLEVEL BIT(3)
|
|
#define bPOSINT BIT(2)
|
|
#define bGPXB BIT(1)
|
|
#define bGPXA BIT(0)
|
|
|
|
#define MAX3420_REG_REVISION 18
|
|
|
|
#define MAX3420_REG_FNADDR 19
|
|
#define FNADDR_MASK 0x7f
|
|
|
|
#define MAX3420_REG_IOPINS 20
|
|
#define MAX3420_REG_IOPINS2 21
|
|
#define MAX3420_REG_GPINIRQ 22
|
|
#define MAX3420_REG_GPINIEN 23
|
|
#define MAX3420_REG_GPINPOL 24
|
|
#define MAX3420_REG_HIRQ 25
|
|
#define MAX3420_REG_HIEN 26
|
|
#define MAX3420_REG_MODE 27
|
|
#define MAX3420_REG_PERADDR 28
|
|
#define MAX3420_REG_HCTL 29
|
|
#define MAX3420_REG_HXFR 30
|
|
#define MAX3420_REG_HRSL 31
|
|
|
|
struct max3420_req {
|
|
struct usb_request usb_req;
|
|
struct list_head queue;
|
|
struct max3420_ep *ep;
|
|
};
|
|
|
|
struct max3420_ep {
|
|
struct max3420_udc *udc;
|
|
struct list_head queue;
|
|
char name[EPNAME_SIZE];
|
|
unsigned int maxpacket;
|
|
struct usb_ep ep_usb;
|
|
int halted;
|
|
int id;
|
|
};
|
|
|
|
struct max3420_udc {
|
|
struct max3420_ep ep[MAX3420_MAX_EPS];
|
|
struct usb_gadget_driver *driver;
|
|
bool softconnect;
|
|
struct usb_ctrlrequest setup;
|
|
struct max3420_req ep0req;
|
|
struct usb_gadget gadget;
|
|
struct spi_slave *slave;
|
|
struct udevice *dev;
|
|
u8 ep0buf[64];
|
|
int remote_wkp;
|
|
bool suspended;
|
|
};
|
|
|
|
#define to_max3420_req(r) container_of((r), struct max3420_req, usb_req)
|
|
#define to_max3420_ep(e) container_of((e), struct max3420_ep, ep_usb)
|
|
#define to_udc(g) container_of((g), struct max3420_udc, gadget)
|
|
|
|
static void spi_ack_ctrl(struct max3420_udc *udc)
|
|
{
|
|
struct spi_slave *slave = udc->slave;
|
|
u8 txdata[1];
|
|
|
|
txdata[0] = FIELD_PREP(MAX3420_SPI_ACK_MASK, 1);
|
|
spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE);
|
|
}
|
|
|
|
static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int ackstat)
|
|
{
|
|
struct spi_slave *slave = udc->slave;
|
|
u8 txdata[2], rxdata[2];
|
|
|
|
txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) |
|
|
FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD) |
|
|
FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0);
|
|
|
|
rxdata[0] = 0;
|
|
rxdata[1] = 0;
|
|
spi_xfer(slave, sizeof(txdata), txdata, rxdata, SPI_XFER_ONCE);
|
|
|
|
return rxdata[1];
|
|
}
|
|
|
|
static u8 spi_rd8(struct max3420_udc *udc, u8 reg)
|
|
{
|
|
return spi_rd8_ack(udc, reg, 0);
|
|
}
|
|
|
|
static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int ackstat)
|
|
{
|
|
struct spi_slave *slave = udc->slave;
|
|
u8 txdata[2];
|
|
|
|
txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) |
|
|
FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR) |
|
|
FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0);
|
|
txdata[1] = val;
|
|
|
|
spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE);
|
|
}
|
|
|
|
static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val)
|
|
{
|
|
spi_wr8_ack(udc, reg, val, 0);
|
|
}
|
|
|
|
static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
|
|
{
|
|
struct spi_slave *slave = udc->slave;
|
|
u8 txdata[1];
|
|
|
|
txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) |
|
|
FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD);
|
|
|
|
spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN);
|
|
spi_xfer(slave, len * 8, NULL, buf, SPI_XFER_END);
|
|
}
|
|
|
|
static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
|
|
{
|
|
struct spi_slave *slave = udc->slave;
|
|
u8 txdata[1];
|
|
|
|
txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) |
|
|
FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR);
|
|
|
|
spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN);
|
|
spi_xfer(slave, len * 8, buf, NULL, SPI_XFER_END);
|
|
}
|
|
|
|
/* 0 if not-connected */
|
|
int g_dnl_board_usb_cable_connected(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void spi_max3420_enable(struct max3420_ep *ep, int enable)
|
|
{
|
|
struct max3420_udc *udc = ep->udc;
|
|
u8 epdis, epien;
|
|
|
|
if (ep->id == 0)
|
|
return;
|
|
|
|
epien = spi_rd8(udc, MAX3420_REG_EPIEN);
|
|
epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS);
|
|
|
|
if (enable) {
|
|
epdis &= ~BIT(ep->id + 4);
|
|
epien |= BIT(ep->id + 1);
|
|
} else {
|
|
epdis |= BIT(ep->id + 4);
|
|
epien &= ~BIT(ep->id + 1);
|
|
}
|
|
|
|
spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis);
|
|
spi_wr8(udc, MAX3420_REG_EPIEN, epien);
|
|
}
|
|
|
|
static int
|
|
max3420_ep_enable(struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct max3420_ep *ep = to_max3420_ep(_ep);
|
|
|
|
_ep->desc = desc;
|
|
_ep->maxpacket = usb_endpoint_maxp(desc) & 0x7ff;
|
|
|
|
spi_max3420_enable(ep, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max3420_req_done(struct max3420_req *req, int status)
|
|
{
|
|
struct max3420_ep *ep = req->ep;
|
|
|
|
if (req->usb_req.status == -EINPROGRESS)
|
|
req->usb_req.status = status;
|
|
else
|
|
status = req->usb_req.status;
|
|
|
|
if (status && status != -ESHUTDOWN)
|
|
dev_err(ep->udc->dev, "%s done %p, status %d\n",
|
|
ep->ep_usb.name, req, status);
|
|
|
|
if (req->usb_req.complete)
|
|
req->usb_req.complete(&ep->ep_usb, &req->usb_req);
|
|
}
|
|
|
|
static void max3420_ep_nuke(struct max3420_ep *ep, int status)
|
|
{
|
|
struct max3420_req *req, *r;
|
|
|
|
list_for_each_entry_safe(req, r, &ep->queue, queue) {
|
|
list_del_init(&req->queue);
|
|
max3420_req_done(req, status);
|
|
}
|
|
}
|
|
|
|
static int max3420_ep_disable(struct usb_ep *_ep)
|
|
{
|
|
struct max3420_ep *ep = to_max3420_ep(_ep);
|
|
|
|
_ep->desc = NULL;
|
|
max3420_ep_nuke(ep, -ESHUTDOWN);
|
|
spi_max3420_enable(ep, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_request *
|
|
max3420_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
|
|
{
|
|
struct max3420_ep *ep = to_max3420_ep(_ep);
|
|
struct max3420_req *req = kzalloc(sizeof(*req), gfp_flags);
|
|
|
|
if (!req)
|
|
return NULL;
|
|
|
|
req->ep = ep;
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
return &req->usb_req;
|
|
}
|
|
|
|
static void
|
|
max3420_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
kfree(to_max3420_req(_req));
|
|
}
|
|
|
|
static int
|
|
max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
{
|
|
struct max3420_req *req = to_max3420_req(_req);
|
|
struct max3420_ep *ep = to_max3420_ep(_ep);
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct max3420_req *req = to_max3420_req(_req);
|
|
|
|
list_del_init(&req->queue);
|
|
max3420_req_done(req, -ECONNRESET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max3420_ep_set_halt(struct usb_ep *_ep, int halt)
|
|
{
|
|
struct max3420_ep *ep = to_max3420_ep(_ep);
|
|
struct max3420_udc *udc = ep->udc;
|
|
u8 epstalls;
|
|
|
|
if (ep->id == 0) /* can't stall EP0 */
|
|
return 0;
|
|
|
|
epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS);
|
|
if (halt) {
|
|
ep->halted = 1;
|
|
epstalls |= BIT(ep->id + 1);
|
|
} else {
|
|
u8 clrtogs;
|
|
|
|
ep->halted = 0;
|
|
epstalls &= ~BIT(ep->id + 1);
|
|
clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS);
|
|
clrtogs |= BIT(ep->id + 1);
|
|
spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs);
|
|
}
|
|
spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | bACKSTAT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_ep_ops max3420_ep_ops = {
|
|
.enable = max3420_ep_enable,
|
|
.disable = max3420_ep_disable,
|
|
.alloc_request = max3420_ep_alloc_request,
|
|
.free_request = max3420_ep_free_request,
|
|
.queue = max3420_ep_queue,
|
|
.dequeue = max3420_ep_dequeue,
|
|
.set_halt = max3420_ep_set_halt,
|
|
};
|
|
|
|
static void __max3420_stop(struct max3420_udc *udc)
|
|
{
|
|
u8 val;
|
|
|
|
/* Disable IRQ to CPU */
|
|
spi_wr8(udc, MAX3420_REG_CPUCTL, 0);
|
|
|
|
val = spi_rd8(udc, MAX3420_REG_USBCTL);
|
|
val |= bPWRDOWN;
|
|
val |= bHOSCSTEN;
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, val);
|
|
}
|
|
|
|
static void __max3420_start(struct max3420_udc *udc)
|
|
{
|
|
u8 val;
|
|
|
|
/* configure SPI */
|
|
spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI);
|
|
|
|
/* Chip Reset */
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, bCHIPRES);
|
|
mdelay(5);
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, 0);
|
|
|
|
/* Poll for OSC to stabilize */
|
|
while (1) {
|
|
val = spi_rd8(udc, MAX3420_REG_USBIRQ);
|
|
if (val & bOSCOKIRQ)
|
|
break;
|
|
cond_resched();
|
|
}
|
|
|
|
/* Enable PULL-UP only when Vbus detected */
|
|
val = spi_rd8(udc, MAX3420_REG_USBCTL);
|
|
val |= bVBGATE | bCONNECT;
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, val);
|
|
|
|
val = bURESDNIRQ | bURESIRQ;
|
|
spi_wr8(udc, MAX3420_REG_USBIEN, val);
|
|
|
|
/* Enable only EP0 interrupts */
|
|
val = bIN0BAVIRQ | bOUT0DAVIRQ | bSUDAVIRQ;
|
|
spi_wr8(udc, MAX3420_REG_EPIEN, val);
|
|
|
|
/* Enable IRQ to CPU */
|
|
spi_wr8(udc, MAX3420_REG_CPUCTL, bIE);
|
|
}
|
|
|
|
static int max3420_udc_start(struct usb_gadget *gadget,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct max3420_udc *udc = to_udc(gadget);
|
|
|
|
udc->driver = driver;
|
|
udc->remote_wkp = 0;
|
|
udc->softconnect = true;
|
|
|
|
__max3420_start(udc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max3420_udc_stop(struct usb_gadget *gadget)
|
|
{
|
|
struct max3420_udc *udc = to_udc(gadget);
|
|
|
|
udc->driver = NULL;
|
|
udc->softconnect = false;
|
|
|
|
__max3420_stop(udc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max3420_wakeup(struct usb_gadget *gadget)
|
|
{
|
|
struct max3420_udc *udc = to_udc(gadget);
|
|
u8 usbctl;
|
|
|
|
/* Only if wakeup allowed by host */
|
|
if (!udc->remote_wkp || !udc->suspended)
|
|
return 0;
|
|
|
|
/* Set Remote-Wakeup Signal*/
|
|
usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
|
|
usbctl |= bSIGRWU;
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
|
|
|
|
mdelay(5);
|
|
|
|
/* Clear Remote-WkUp Signal*/
|
|
usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
|
|
usbctl &= ~bSIGRWU;
|
|
spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
|
|
|
|
udc->suspended = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_gadget_ops max3420_udc_ops = {
|
|
.udc_start = max3420_udc_start,
|
|
.udc_stop = max3420_udc_stop,
|
|
.wakeup = max3420_wakeup,
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
.wMaxPacketSize = cpu_to_le16(EP_MAX_PACKET),
|
|
};
|
|
|
|
static void max3420_getstatus(struct max3420_udc *udc)
|
|
{
|
|
struct max3420_ep *ep;
|
|
u16 status = 0;
|
|
|
|
switch (udc->setup.bRequestType & USB_RECIP_MASK) {
|
|
case USB_RECIP_DEVICE:
|
|
/* Get device status */
|
|
status = 0 << USB_DEVICE_SELF_POWERED;
|
|
status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP);
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
if (udc->driver->setup(&udc->gadget, &udc->setup) < 0)
|
|
goto stall;
|
|
break;
|
|
case USB_RECIP_ENDPOINT:
|
|
ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK];
|
|
if (ep->halted)
|
|
status = 1 << USB_ENDPOINT_HALT;
|
|
break;
|
|
default:
|
|
goto stall;
|
|
}
|
|
|
|
status = cpu_to_le16(status);
|
|
spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2);
|
|
spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1);
|
|
return;
|
|
stall:
|
|
dev_err(udc->dev, "Can't respond to getstatus request\n");
|
|
spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT);
|
|
}
|
|
|
|
static void max3420_set_clear_feature(struct max3420_udc *udc)
|
|
{
|
|
int set = udc->setup.bRequest == USB_REQ_SET_FEATURE;
|
|
struct max3420_ep *ep;
|
|
int id;
|
|
|
|
switch (udc->setup.bRequestType) {
|
|
case USB_RECIP_DEVICE:
|
|
if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP)
|
|
break;
|
|
|
|
if (udc->setup.bRequest == USB_REQ_SET_FEATURE)
|
|
udc->remote_wkp = 1;
|
|
else
|
|
udc->remote_wkp = 0;
|
|
|
|
return spi_ack_ctrl(udc);
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
if (udc->setup.wValue != USB_ENDPOINT_HALT)
|
|
break;
|
|
|
|
id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
|
|
ep = &udc->ep[id];
|
|
|
|
max3420_ep_set_halt(&ep->ep_usb, set);
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n");
|
|
spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT);
|
|
}
|
|
|
|
static void max3420_handle_setup(struct max3420_udc *udc)
|
|
{
|
|
struct usb_ctrlrequest setup;
|
|
u8 addr;
|
|
|
|
spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8);
|
|
|
|
udc->setup = setup;
|
|
udc->setup.wValue = cpu_to_le16(setup.wValue);
|
|
udc->setup.wIndex = cpu_to_le16(setup.wIndex);
|
|
udc->setup.wLength = cpu_to_le16(setup.wLength);
|
|
|
|
switch (udc->setup.bRequest) {
|
|
case USB_REQ_GET_STATUS:
|
|
/* Data+Status phase form udc */
|
|
if ((udc->setup.bRequestType &
|
|
(USB_DIR_IN | USB_TYPE_MASK)) !=
|
|
(USB_DIR_IN | USB_TYPE_STANDARD)) {
|
|
break;
|
|
}
|
|
return max3420_getstatus(udc);
|
|
case USB_REQ_SET_ADDRESS:
|
|
/* Status phase from udc */
|
|
if (udc->setup.bRequestType != (USB_DIR_OUT |
|
|
USB_TYPE_STANDARD | USB_RECIP_DEVICE))
|
|
break;
|
|
addr = spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1);
|
|
dev_dbg(udc->dev, "Assigned Address=%d/%d\n",
|
|
udc->setup.wValue, addr);
|
|
return;
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
case USB_REQ_SET_FEATURE:
|
|
/* Requests with no data phase, status phase from udc */
|
|
if ((udc->setup.bRequestType & USB_TYPE_MASK)
|
|
!= USB_TYPE_STANDARD)
|
|
break;
|
|
return max3420_set_clear_feature(udc);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (udc->driver->setup(&udc->gadget, &setup) < 0) {
|
|
/* Stall EP0 */
|
|
spi_wr8(udc, MAX3420_REG_EPSTALLS,
|
|
bSTLEP0IN | bSTLEP0OUT | bSTLSTAT);
|
|
}
|
|
}
|
|
|
|
static int do_data(struct max3420_udc *udc, int ep_id, int in)
|
|
{
|
|
struct max3420_ep *ep = &udc->ep[ep_id];
|
|
struct max3420_req *req;
|
|
int done, length, psz;
|
|
void *buf;
|
|
|
|
if (list_empty(&ep->queue))
|
|
return 0;
|
|
|
|
req = list_first_entry(&ep->queue, struct max3420_req, queue);
|
|
buf = req->usb_req.buf + req->usb_req.actual;
|
|
|
|
psz = ep->ep_usb.maxpacket;
|
|
length = req->usb_req.length - req->usb_req.actual;
|
|
length = min(length, psz);
|
|
|
|
if (length == 0) {
|
|
done = 1;
|
|
goto xfer_done;
|
|
}
|
|
|
|
done = 0;
|
|
if (in) {
|
|
spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
|
|
spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length);
|
|
if (length < psz)
|
|
done = 1;
|
|
} else {
|
|
psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id);
|
|
length = min(length, psz);
|
|
spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
|
|
if (length < ep->ep_usb.maxpacket)
|
|
done = 1;
|
|
}
|
|
|
|
req->usb_req.actual += length;
|
|
|
|
if (req->usb_req.actual == req->usb_req.length)
|
|
done = 1;
|
|
|
|
xfer_done:
|
|
if (done) {
|
|
list_del_init(&req->queue);
|
|
|
|
if (ep_id == 0)
|
|
spi_ack_ctrl(udc);
|
|
|
|
max3420_req_done(req, 0);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int max3420_handle_irqs(struct max3420_udc *udc)
|
|
{
|
|
u8 epien, epirq, usbirq, usbien, reg[4];
|
|
int ret = 0;
|
|
|
|
spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4);
|
|
epirq = reg[0];
|
|
epien = reg[1];
|
|
usbirq = reg[2];
|
|
usbien = reg[3];
|
|
|
|
usbirq &= usbien;
|
|
epirq &= epien;
|
|
|
|
if (epirq & bSUDAVIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_EPIRQ, bSUDAVIRQ);
|
|
max3420_handle_setup(udc);
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bVBUSIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bVBUSIRQ);
|
|
dev_dbg(udc->dev, "Cable plugged in\n");
|
|
g_dnl_clear_detach();
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bNOVBUSIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bNOVBUSIRQ);
|
|
dev_dbg(udc->dev, "Cable pulled out\n");
|
|
g_dnl_trigger_detach();
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bURESIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bURESIRQ);
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bURESDNIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bURESDNIRQ);
|
|
spi_wr8(udc, MAX3420_REG_USBIEN, bURESDNIRQ | bURESIRQ);
|
|
spi_wr8(udc, MAX3420_REG_EPIEN, bSUDAVIRQ
|
|
| bIN0BAVIRQ | bOUT0DAVIRQ);
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bSUSPIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bSUSPIRQ);
|
|
dev_dbg(udc->dev, "USB Suspend - Enter\n");
|
|
udc->suspended = true;
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bBUSACTIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bBUSACTIRQ);
|
|
dev_dbg(udc->dev, "USB Suspend - Exit\n");
|
|
udc->suspended = false;
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bRWUDNIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bRWUDNIRQ);
|
|
dev_dbg(udc->dev, "Asked Host to wakeup\n");
|
|
return 1;
|
|
}
|
|
|
|
if (usbirq & bOSCOKIRQ) {
|
|
spi_wr8(udc, MAX3420_REG_USBIRQ, bOSCOKIRQ);
|
|
dev_dbg(udc->dev, "Osc stabilized, start work\n");
|
|
return 1;
|
|
}
|
|
|
|
if (epirq & bOUT0DAVIRQ && do_data(udc, 0, 0)) {
|
|
spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT0DAVIRQ, 1);
|
|
ret = 1;
|
|
}
|
|
|
|
if (epirq & bIN0BAVIRQ && do_data(udc, 0, 1))
|
|
ret = 1;
|
|
|
|
if (epirq & bOUT1DAVIRQ && do_data(udc, 1, 0)) {
|
|
spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT1DAVIRQ, 1);
|
|
ret = 1;
|
|
}
|
|
|
|
if (epirq & bIN2BAVIRQ && do_data(udc, 2, 1))
|
|
ret = 1;
|
|
|
|
if (epirq & bIN3BAVIRQ && do_data(udc, 3, 1))
|
|
ret = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max3420_irq(struct max3420_udc *udc)
|
|
{
|
|
do_data(udc, 0, 1); /* get done with the EP0 ZLP */
|
|
|
|
return max3420_handle_irqs(udc);
|
|
}
|
|
|
|
static void max3420_setup_eps(struct max3420_udc *udc)
|
|
{
|
|
int i;
|
|
|
|
INIT_LIST_HEAD(&udc->gadget.ep_list);
|
|
INIT_LIST_HEAD(&udc->ep[0].ep_usb.ep_list);
|
|
|
|
for (i = 0; i < MAX3420_MAX_EPS; i++) {
|
|
struct max3420_ep *ep = &udc->ep[i];
|
|
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
|
|
ep->id = i;
|
|
ep->udc = udc;
|
|
ep->ep_usb.ops = &max3420_ep_ops;
|
|
ep->ep_usb.name = ep->name;
|
|
ep->ep_usb.maxpacket = EP_MAX_PACKET;
|
|
|
|
if (i == 0) {
|
|
ep->ep_usb.desc = &ep0_desc;
|
|
snprintf(ep->name, EPNAME_SIZE, "ep0");
|
|
continue;
|
|
}
|
|
|
|
list_add_tail(&ep->ep_usb.ep_list, &udc->gadget.ep_list);
|
|
|
|
if (i == 1)
|
|
snprintf(ep->name, EPNAME_SIZE, "ep1out-bulk");
|
|
else
|
|
snprintf(ep->name, EPNAME_SIZE, "ep%din-bulk", i);
|
|
};
|
|
}
|
|
|
|
static void max3420_setup_spi(struct max3420_udc *udc)
|
|
{
|
|
u8 reg[8];
|
|
|
|
spi_claim_bus(udc->slave);
|
|
spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8);
|
|
/* configure SPI */
|
|
spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI);
|
|
}
|
|
|
|
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
|
|
{
|
|
struct max3420_udc *udc = dev_get_priv(dev);
|
|
|
|
return max3420_irq(udc);
|
|
}
|
|
|
|
static int max3420_udc_probe(struct udevice *dev)
|
|
{
|
|
struct max3420_udc *udc = dev_get_priv(dev);
|
|
struct dm_spi_slave_plat *slave_pdata;
|
|
struct udevice *bus = dev->parent;
|
|
int busnum = dev_seq(bus);
|
|
unsigned int cs;
|
|
uint speed, mode;
|
|
struct udevice *spid;
|
|
|
|
slave_pdata = dev_get_parent_plat(dev);
|
|
cs = slave_pdata->cs;
|
|
speed = slave_pdata->max_hz;
|
|
mode = slave_pdata->mode;
|
|
_spi_get_bus_and_cs(busnum, cs, speed, mode, false, "spi_generic_drv",
|
|
NULL, &spid, &udc->slave);
|
|
|
|
udc->dev = dev;
|
|
udc->gadget.ep0 = &udc->ep[0].ep_usb;
|
|
udc->gadget.max_speed = USB_SPEED_FULL;
|
|
udc->gadget.speed = USB_SPEED_FULL;
|
|
udc->gadget.is_dualspeed = 0;
|
|
udc->gadget.ops = &max3420_udc_ops;
|
|
udc->gadget.name = "max3420-udc";
|
|
|
|
max3420_setup_eps(udc);
|
|
max3420_setup_spi(udc);
|
|
|
|
usb_add_gadget_udc((struct device *)dev, &udc->gadget);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max3420_udc_remove(struct udevice *dev)
|
|
{
|
|
struct max3420_udc *udc = dev_get_priv(dev);
|
|
|
|
usb_del_gadget_udc(&udc->gadget);
|
|
|
|
spi_release_bus(udc->slave);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id max3420_ids[] = {
|
|
{ .compatible = "maxim,max3421-udc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(max3420_generic_udc) = {
|
|
.name = "max3420-udc",
|
|
.id = UCLASS_USB_GADGET_GENERIC,
|
|
.of_match = max3420_ids,
|
|
.probe = max3420_udc_probe,
|
|
.remove = max3420_udc_remove,
|
|
.priv_auto = sizeof(struct max3420_udc),
|
|
};
|