mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
50bb94c949
Commit referenced in subject breaks IGEP0032 build with the following error: drivers/misc/status_led.c:30:7: error: 'RED_LED_GPIO' undeclared here (not in a function) scripts/Makefile.build:275: recipe for target 'drivers/misc/status_led.o' failed make[2]: *** [drivers/misc/status_led.o] Error 1 scripts/Makefile.build:420: recipe for target 'drivers/misc' failed make[1]: *** [drivers/misc] Error 2 Makefile:1093: recipe for target 'drivers' failed make: *** [drivers] Error 2 Fix this by skipping the status led on IGEP0032 machine as is not available and throw an error for future machines if the status led is not configured to avoid build breakage. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
219 lines
6 KiB
C
219 lines
6 KiB
C
/*
|
|
* Common configuration settings for IGEP technology based boards
|
|
*
|
|
* (C) Copyright 2012
|
|
* ISEE 2007 SL, <www.iseebcn.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __IGEP00X0_H
|
|
#define __IGEP00X0_H
|
|
|
|
#ifdef CONFIG_BOOT_NAND
|
|
#define CONFIG_NAND
|
|
#endif
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
#include <configs/ti_omap3_common.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
/*
|
|
* Display CPU and Board information
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
|
|
#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
|
|
#define CONFIG_STATUS_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
#define CONFIG_GPIO_LED
|
|
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
|
|
#define RED_LED_GPIO 27
|
|
#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
|
|
#define RED_LED_GPIO 16
|
|
#else
|
|
#error "status LED not defined for this machine."
|
|
#endif
|
|
#define RED_LED_DEV 0
|
|
#define STATUS_LED_BIT RED_LED_GPIO
|
|
#define STATUS_LED_STATE STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
#define STATUS_LED_BOOT RED_LED_DEV
|
|
#endif
|
|
|
|
/* GPIO banks */
|
|
#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
|
|
#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
|
|
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
|
|
|
|
/* USB */
|
|
#define CONFIG_MUSB_UDC 1
|
|
#define CONFIG_USB_OMAP3 1
|
|
#define CONFIG_TWL4030_USB 1
|
|
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE 1
|
|
#define CONFIG_USB_TTY 1
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
|
|
|
/* Change these to suit your needs */
|
|
#define CONFIG_USBD_VENDORID 0x0451
|
|
#define CONFIG_USBD_PRODUCTID 0x5678
|
|
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
|
|
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#ifdef CONFIG_BOOT_ONENAND
|
|
#define CONFIG_CMD_ONENAND /* ONENAND support */
|
|
#endif
|
|
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
|
|
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
|
|
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
|
#endif
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_NFS /* NFS support */
|
|
|
|
/*#undef CONFIG_ENV_IS_NOWHERE*/
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"usbtty=cdc_acm\0" \
|
|
"loadaddr=0x82000000\0" \
|
|
"dtbaddr=0x81600000\0" \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"console=ttyO2,115200n8\0" \
|
|
"mpurate=auto\0" \
|
|
"vram=12M\0" \
|
|
"dvimode=1024x768MR-16@60\0" \
|
|
"defaultdisplay=dvi\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"nandroot=/dev/mtdblock4 rw\0" \
|
|
"nandrootfstype=jffs2\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"mpurate=${mpurate} " \
|
|
"vram=${vram} " \
|
|
"omapfb.mode=dvi:${dvimode} " \
|
|
"omapfb.debug=y " \
|
|
"omapdss.def_disp=${defaultdisplay} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"mpurate=${mpurate} " \
|
|
"vram=${vram} " \
|
|
"omapfb.mode=dvi:${dvimode} " \
|
|
"omapfb.debug=y " \
|
|
"omapdss.def_disp=${defaultdisplay} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype}\0" \
|
|
"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootz ${loadaddr}\0" \
|
|
"mmcbootfdt=echo Booting with DT from mmc ...; " \
|
|
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"nandboot=echo Booting from onenand ...; " \
|
|
"run nandargs; " \
|
|
"onenand read ${loadaddr} 280000 400000; " \
|
|
"bootz ${loadaddr}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootenv; then " \
|
|
"run importbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loadzimage; then " \
|
|
"if test -n $dtbfile; then " \
|
|
"if run loadfdt; then " \
|
|
"run mmcbootfdt;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"run mmcboot;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"run nandboot;" \
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
#ifdef CONFIG_BOOT_ONENAND
|
|
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
|
|
|
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
|
|
|
|
#define CONFIG_ENV_IS_IN_ONENAND 1
|
|
#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
|
|
#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
|
|
#define CONFIG_ENV_IS_IN_NAND 1
|
|
#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
|
|
#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
|
|
#endif
|
|
|
|
/*
|
|
* SMSC911x Ethernet
|
|
*/
|
|
#if defined(CONFIG_CMD_NET)
|
|
#define CONFIG_SMC911X
|
|
#define CONFIG_SMC911X_32_BIT
|
|
#define CONFIG_SMC911X_BASE 0x2C000000
|
|
#endif /* (CONFIG_CMD_NET) */
|
|
|
|
/* OneNAND boot config */
|
|
#ifdef CONFIG_BOOT_ONENAND
|
|
#define CONFIG_SPL_ONENAND_SUPPORT
|
|
#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
|
|
#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
|
|
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
|
|
#define CONFIG_SPL_ONENAND_LOAD_SIZE \
|
|
(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
|
|
|
|
#endif
|
|
|
|
/* NAND boot config */
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
|
|
10, 11, 12, 13}
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
/* NAND: SPL falcon mode configs */
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0x240000
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
|
|
#endif
|
|
#endif
|
|
|
|
#endif /* __IGEP00X0_H */
|