mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
96b109ba74
Update the driver to support the device tree and the driver model.
Timings and panel parameters are now loaded from the device tree.
The DM code replaces the am335x_lcdpanel structure with
tilcdc_panel_info taken from the linux kernel, as well the management
of additional parameters not covered in the legacy code. In addition,
the am335x_lcdpanel structure contains parameters and operations that
were probably a requirement of the board for which this driver was
developed and which, however, were not developed in the linux kernel.
All this led to rewrite th DM controller initialization code, except
for the pixel clock setting that is executed in a function created in a
previous patch with code taken from the legacy am335xfb_init.
The patch has been tested on a custom board with u-boot 2018.11-rc2 and
the following device-tree configuration:
panel {
compatible = "ti,tilcdc,panel";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pins>;
enable-gpios = <&gpio0 31 0>;
backlight = <&backlight>;
status = "okay";
u-boot,dm-pre-reloc;
panel-info {
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <16>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
native-mode = <&timing0>;
timing0: 800x480 {
hactive = <800>;
vactive = <480>;
hback-porch = <46>;
hfront-porch = <210>;
hsync-len = <20>;
vback-porch = <23>;
vfront-porch = <22>;
vsync-len = <10>;
clock-frequency = <33000000>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
775 lines
25 KiB
Text
775 lines
25 KiB
Text
#
|
|
# Video configuration
|
|
#
|
|
|
|
menu "Graphics support"
|
|
|
|
config DM_VIDEO
|
|
bool "Enable driver model support for LCD/video"
|
|
depends on DM
|
|
help
|
|
This enables driver model for LCD and video devices. These support
|
|
a bitmap display of various sizes and depths which can be drawn on
|
|
to display a command-line console or splash screen. Enabling this
|
|
option compiles in the video uclass and routes all LCD/video access
|
|
through this.
|
|
|
|
config BACKLIGHT_PWM
|
|
bool "Generic PWM based Backlight Driver"
|
|
depends on DM_VIDEO && DM_PWM
|
|
default y
|
|
help
|
|
If you have a LCD backlight adjustable by PWM, say Y to enable
|
|
this driver.
|
|
This driver can be use with "simple-panel" and
|
|
it understands the standard device tree
|
|
(leds/backlight/pwm-backlight.txt)
|
|
|
|
config BACKLIGHT_GPIO
|
|
bool "Generic GPIO based Backlight Driver"
|
|
depends on DM_VIDEO
|
|
help
|
|
If you have a LCD backlight adjustable by GPIO, say Y to enable
|
|
this driver.
|
|
This driver can be used with "simple-panel" and
|
|
it understands the standard device tree
|
|
(leds/backlight/gpio-backlight.txt)
|
|
|
|
config VIDEO_BPP8
|
|
bool "Support 8-bit-per-pixel displays"
|
|
depends on DM_VIDEO
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 8-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_BPP16
|
|
bool "Support 16-bit-per-pixel displays"
|
|
depends on DM_VIDEO
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 16-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_BPP32
|
|
bool "Support 32-bit-per-pixel displays"
|
|
depends on DM_VIDEO
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 32-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_ANSI
|
|
bool "Support ANSI escape sequences in video console"
|
|
depends on DM_VIDEO
|
|
default y
|
|
help
|
|
Enable ANSI escape sequence decoding for a more fully functional
|
|
console.
|
|
|
|
config VIDEO_MIPI_DSI
|
|
bool "Support MIPI DSI interface"
|
|
depends on DM_VIDEO
|
|
help
|
|
Support MIPI DSI interface for driving a MIPI compatible device.
|
|
The MIPI Display Serial Interface (MIPI DSI) defines a high-speed
|
|
serial interface between a host processor and a display module.
|
|
|
|
config CONSOLE_NORMAL
|
|
bool "Support a simple text console"
|
|
depends on DM_VIDEO
|
|
default y if DM_VIDEO
|
|
help
|
|
Support drawing text on the frame buffer console so that it can be
|
|
used as a console. Rotation is not supported by this driver (see
|
|
CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used
|
|
for the display.
|
|
|
|
config CONSOLE_ROTATION
|
|
bool "Support rotated displays"
|
|
depends on DM_VIDEO
|
|
help
|
|
Sometimes, for example if the display is mounted in portrait
|
|
mode or even if it's mounted landscape but rotated by 180degree,
|
|
we need to rotate our content of the display relative to the
|
|
framebuffer, so that user can read the messages which are
|
|
printed out. Enable this option to include a text driver which can
|
|
support this. The rotation is set by the 'rot' parameter in
|
|
struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
|
|
degrees, 3=270 degrees.
|
|
|
|
config CONSOLE_TRUETYPE
|
|
bool "Support a console that uses TrueType fonts"
|
|
depends on DM_VIDEO
|
|
help
|
|
TrueTrype fonts can provide outline-drawing capability rather than
|
|
needing to provide a bitmap for each font and size that is needed.
|
|
With this option you can adjust the text size and use a variety of
|
|
fonts. Note that this is noticeably slower than with normal console.
|
|
|
|
config CONSOLE_TRUETYPE_SIZE
|
|
int "TrueType font size"
|
|
depends on CONSOLE_TRUETYPE
|
|
default 18
|
|
help
|
|
This sets the font size for the console. The size is measured in
|
|
pixels and is the nominal height of a character. Note that fonts
|
|
are commonly measured in 'points', being 1/72 inch (about 3.52mm).
|
|
However that measurement depends on the size of your display and
|
|
there is no standard display density. At present there is not a
|
|
method to select the display's physical size, which would allow
|
|
U-Boot to calculate the correct font size.
|
|
|
|
config SYS_WHITE_ON_BLACK
|
|
bool "Display console as white on a black background"
|
|
default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || TEGRA || X86 || ARCH_SUNXI
|
|
help
|
|
Normally the display is black on a white background, Enable this
|
|
option to invert this, i.e. white on a black background. This can be
|
|
better in low-light situations or to reduce eye strain in some
|
|
cases.
|
|
|
|
config NO_FB_CLEAR
|
|
bool "Skip framebuffer clear"
|
|
help
|
|
If firmware (whatever loads u-boot) has already put a splash image
|
|
on screen, you might want to preserve it until whatever u-boot
|
|
loads takes over the screen. This, for example, can be used to
|
|
keep splash image on screen until grub graphical boot menu starts.
|
|
|
|
source "drivers/video/fonts/Kconfig"
|
|
|
|
config VIDCONSOLE_AS_LCD
|
|
bool "Use 'vidconsole' when 'lcd' is seen in stdout"
|
|
depends on DM_VIDEO
|
|
help
|
|
This is a work-around for boards which have 'lcd' in their stdout
|
|
environment variable, but have moved to use driver model for video.
|
|
In this case the console will no-longer work. While it is possible
|
|
to update the environment, the breakage may be confusing for users.
|
|
This option will be removed around the end of 2016.
|
|
|
|
config VIDEO_COREBOOT
|
|
bool "Enable coreboot framebuffer driver support"
|
|
depends on X86 && SYS_COREBOOT
|
|
help
|
|
Turn on this option to enable a framebuffer driver when U-Boot is
|
|
loaded by coreboot where the graphics device is configured by
|
|
coreboot already. This can in principle be used with any platform
|
|
that coreboot supports.
|
|
|
|
config VIDEO_EFI
|
|
bool "Enable EFI framebuffer driver support"
|
|
depends on EFI_STUB
|
|
help
|
|
Turn on this option to enable a framebuffeer driver when U-Boot is
|
|
loaded as a payload (see README.u-boot_on_efi) by an EFI BIOS where
|
|
the graphics device is configured by the EFI BIOS already. This can
|
|
in principle be used with any platform that has an EFI BIOS.
|
|
|
|
config VIDEO_VESA
|
|
bool "Enable VESA video driver support"
|
|
default n
|
|
help
|
|
Turn on this option to enable a very simple driver which uses vesa
|
|
to discover the video mode and then provides a frame buffer for use
|
|
by U-Boot. This can in principle be used with any platform that
|
|
supports PCI and video cards that support VESA BIOS Extension (VBE).
|
|
|
|
config FRAMEBUFFER_SET_VESA_MODE
|
|
bool "Set framebuffer graphics resolution"
|
|
depends on VIDEO_VESA || VIDEO_BROADWELL_IGD
|
|
help
|
|
Set VESA/native framebuffer mode (needed for bootsplash and graphical
|
|
framebuffer console)
|
|
|
|
choice
|
|
prompt "framebuffer graphics resolution"
|
|
default FRAMEBUFFER_VESA_MODE_118
|
|
depends on FRAMEBUFFER_SET_VESA_MODE
|
|
help
|
|
This option sets the resolution used for the U-Boot framebuffer (and
|
|
bootsplash screen).
|
|
|
|
config FRAMEBUFFER_VESA_MODE_100
|
|
bool "640x400 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_101
|
|
bool "640x480 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_102
|
|
bool "800x600 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_103
|
|
bool "800x600 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_104
|
|
bool "1024x768 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_105
|
|
bool "1024x768 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_106
|
|
bool "1280x1024 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_107
|
|
bool "1280x1024 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_108
|
|
bool "80x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_109
|
|
bool "132x25 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10A
|
|
bool "132x43 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10B
|
|
bool "132x50 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10C
|
|
bool "132x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10D
|
|
bool "320x200 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10E
|
|
bool "320x200 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10F
|
|
bool "320x200 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_110
|
|
bool "640x480 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_111
|
|
bool "640x480 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_112
|
|
bool "640x480 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_113
|
|
bool "800x600 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_114
|
|
bool "800x600 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_115
|
|
bool "800x600 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_116
|
|
bool "1024x768 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_117
|
|
bool "1024x768 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_118
|
|
bool "1024x768 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_119
|
|
bool "1280x1024 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11A
|
|
bool "1280x1024 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11B
|
|
bool "1280x1024 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_USER
|
|
bool "Manually select VESA mode"
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config FRAMEBUFFER_VESA_MODE
|
|
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
|
|
hex
|
|
default 0x100 if FRAMEBUFFER_VESA_MODE_100
|
|
default 0x101 if FRAMEBUFFER_VESA_MODE_101
|
|
default 0x102 if FRAMEBUFFER_VESA_MODE_102
|
|
default 0x103 if FRAMEBUFFER_VESA_MODE_103
|
|
default 0x104 if FRAMEBUFFER_VESA_MODE_104
|
|
default 0x105 if FRAMEBUFFER_VESA_MODE_105
|
|
default 0x106 if FRAMEBUFFER_VESA_MODE_106
|
|
default 0x107 if FRAMEBUFFER_VESA_MODE_107
|
|
default 0x108 if FRAMEBUFFER_VESA_MODE_108
|
|
default 0x109 if FRAMEBUFFER_VESA_MODE_109
|
|
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
|
|
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
|
|
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
|
|
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
|
|
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
|
|
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
|
|
default 0x110 if FRAMEBUFFER_VESA_MODE_110
|
|
default 0x111 if FRAMEBUFFER_VESA_MODE_111
|
|
default 0x112 if FRAMEBUFFER_VESA_MODE_112
|
|
default 0x113 if FRAMEBUFFER_VESA_MODE_113
|
|
default 0x114 if FRAMEBUFFER_VESA_MODE_114
|
|
default 0x115 if FRAMEBUFFER_VESA_MODE_115
|
|
default 0x116 if FRAMEBUFFER_VESA_MODE_116
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_117
|
|
default 0x118 if FRAMEBUFFER_VESA_MODE_118
|
|
default 0x119 if FRAMEBUFFER_VESA_MODE_119
|
|
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
|
|
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
|
|
|
|
config VIDEO_LCD_ANX9804
|
|
bool "ANX9804 bridge chip"
|
|
default n
|
|
---help---
|
|
Support for the ANX9804 bridge chip, which can take pixel data coming
|
|
from a parallel LCD interface and translate it on the fy into a DP
|
|
interface for driving eDP TFT displays. It uses I2C for configuration.
|
|
|
|
config VIDEO_LCD_ORISETECH_OTM8009A
|
|
bool "OTM8009A DSI LCD panel support"
|
|
depends on DM_VIDEO
|
|
select VIDEO_MIPI_DSI
|
|
default n
|
|
help
|
|
Say Y here if you want to enable support for Orise Technology
|
|
otm8009a 480x800 dsi 2dl panel.
|
|
|
|
config VIDEO_LCD_RAYDIUM_RM68200
|
|
bool "RM68200 DSI LCD panel support"
|
|
depends on DM_VIDEO
|
|
select VIDEO_MIPI_DSI
|
|
default n
|
|
help
|
|
Say Y here if you want to enable support for Raydium RM68200
|
|
720x1280 DSI video mode panel.
|
|
|
|
config VIDEO_LCD_SSD2828
|
|
bool "SSD2828 bridge chip"
|
|
default n
|
|
---help---
|
|
Support for the SSD2828 bridge chip, which can take pixel data coming
|
|
from a parallel LCD interface and translate it on the fly into MIPI DSI
|
|
interface for driving a MIPI compatible LCD panel. It uses SPI for
|
|
configuration.
|
|
|
|
config VIDEO_LCD_SSD2828_TX_CLK
|
|
int "SSD2828 TX_CLK frequency (in MHz)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default 0
|
|
---help---
|
|
The frequency of the crystal, which is clocking SSD2828. It may be
|
|
anything in the 8MHz-30MHz range and the exact value should be
|
|
retrieved from the board schematics. Or in the case of Allwinner
|
|
hardware, it can be usually found as 'lcd_xtal_freq' variable in
|
|
FEX files. It can be also set to 0 for selecting PCLK from the
|
|
parallel LCD interface instead of TX_CLK as the PLL clock source.
|
|
|
|
config VIDEO_LCD_SSD2828_RESET
|
|
string "RESET pin of SSD2828"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
The reset pin of SSD2828 chip. This takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_HITACHI_TX18D42VM
|
|
bool "Hitachi tx18d42vm LVDS LCD panel support"
|
|
depends on VIDEO
|
|
default n
|
|
---help---
|
|
Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
|
|
lcd controller which needs to be initialized over SPI, once that is
|
|
done they work like a regular LVDS panel.
|
|
|
|
config VIDEO_LCD_SPI_CS
|
|
string "SPI CS pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_SCLK
|
|
string "SPI SCLK pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MOSI
|
|
string "SPI MOSI pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MISO
|
|
string "SPI MISO pin for LCD related config job (optional)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. If wired up, this pin may provide additional
|
|
useful functionality. Such as bi-directional communication with the
|
|
hardware and LCD panel id retrieval (if the panel can report it). The
|
|
option takes a string in the format understood by 'name_to_gpio'
|
|
function, e.g. PH1 for pin 1 of port H.
|
|
|
|
source "drivers/video/meson/Kconfig"
|
|
|
|
config VIDEO_MVEBU
|
|
bool "Armada XP LCD controller"
|
|
default n
|
|
---help---
|
|
Support for the LCD controller integrated in the Marvell
|
|
Armada XP SoC.
|
|
|
|
config VIDEO_OMAP3
|
|
bool "Enable OMAP3+ DSS Support"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
This enables the Display subsystem (DSS) on OMAP3+ boards.
|
|
|
|
config I2C_EDID
|
|
bool "Enable EDID library"
|
|
default n
|
|
help
|
|
This enables library for accessing EDID data from an LCD panel.
|
|
|
|
config DISPLAY
|
|
bool "Enable Display support"
|
|
depends on DM
|
|
default n
|
|
select I2C_EDID
|
|
help
|
|
This supports drivers that provide a display, such as eDP (Embedded
|
|
DisplayPort) and HDMI (High Definition Multimedia Interface).
|
|
The devices provide a simple interface to start up the display,
|
|
read display information and enable it.
|
|
|
|
config NXP_TDA19988
|
|
bool "Enable NXP TDA19988 support"
|
|
depends on DISPLAY
|
|
default n
|
|
help
|
|
This enables support for the NXP TDA19988 HDMI encoder. This encoder
|
|
will convert RGB data streams into HDMI-encoded signals.
|
|
|
|
config ATMEL_HLCD
|
|
bool "Enable ATMEL video support using HLCDC"
|
|
depends on DM_VIDEO
|
|
help
|
|
HLCDC supports video output to an attached LCD panel.
|
|
|
|
config AM335X_LCD
|
|
bool "Enable AM335x video support"
|
|
depends on DM_VIDEO
|
|
help
|
|
Supports video output to an attached LCD panel.
|
|
|
|
config LOGICORE_DP_TX
|
|
bool "Enable Logicore DP TX driver"
|
|
depends on DISPLAY
|
|
help
|
|
Enable the driver for the transmitter part of the Xilinx LogiCORE
|
|
DisplayPort, a IP core for Xilinx FPGAs that implements a DisplayPort
|
|
video interface as defined by VESA DisplayPort v1.2.
|
|
|
|
Note that this is a pure transmitter device, and has no display
|
|
capabilities by itself.
|
|
|
|
config VIDEO_BROADWELL_IGD
|
|
bool "Enable Intel Broadwell integrated graphics device"
|
|
depends on X86
|
|
help
|
|
This enables support for integrated graphics on Intel broadwell
|
|
devices. Initialisation is mostly performed by a VGA boot ROM, with
|
|
some setup handled by U-Boot itself. The graphics adaptor works as
|
|
a VESA device and supports LCD panels, eDP and LVDS outputs.
|
|
Configuration of most aspects of device operation is performed using
|
|
a special tool which configures the VGA ROM, but the graphics
|
|
resolution can be selected in U-Boot.
|
|
|
|
config VIDEO_IVYBRIDGE_IGD
|
|
bool "Enable Intel Ivybridge integration graphics support"
|
|
depends on X86
|
|
help
|
|
This enables support for integrated graphics on Intel ivybridge
|
|
devices. Initialisation is mostly performed by a VGA boot ROM, with
|
|
some setup handled by U-Boot itself. The graphics adaptor works as
|
|
a VESA device and supports LCD panels, eDP and LVDS outputs.
|
|
Configuration of most aspects of device operation is performed using
|
|
a special tool which configures the VGA ROM, but the graphics
|
|
resolution can be selected in U-Boot.
|
|
|
|
config VIDEO_FSL_DCU_FB
|
|
bool "Enable Freescale Display Control Unit"
|
|
depends on VIDEO || DM_VIDEO
|
|
help
|
|
This enables support for Freescale Display Control Unit (DCU4)
|
|
module found on Freescale Vybrid and QorIQ family of SoCs.
|
|
|
|
config VIDEO_FSL_DCU_MAX_FB_SIZE_MB
|
|
int "Freescale DCU framebuffer size"
|
|
depends on VIDEO_FSL_DCU_FB
|
|
default 4194304
|
|
help
|
|
Set maximum framebuffer size to be used for Freescale Display
|
|
Controller Unit (DCU4).
|
|
|
|
source "drivers/video/rockchip/Kconfig"
|
|
|
|
config VIDEO_ARM_MALIDP
|
|
bool "Enable Arm Mali Display Processor support"
|
|
depends on DM_VIDEO && OF_CONTROL
|
|
select VEXPRESS_CLK
|
|
help
|
|
This enables support for Arm Ltd Mali Display Processors from
|
|
the DP500, DP550 and DP650 family.
|
|
|
|
config VIDEO_SANDBOX_SDL
|
|
bool "Enable sandbox video console using SDL"
|
|
depends on SANDBOX
|
|
help
|
|
When using sandbox you can enable an emulated LCD display which
|
|
appears as an SDL (Simple DirectMedia Layer) window. This is a
|
|
console device and can display stdout output. Within U-Boot is is
|
|
a normal bitmap display and can display images as well as text.
|
|
|
|
source "drivers/video/stm32/Kconfig"
|
|
|
|
config VIDEO_TEGRA20
|
|
bool "Enable LCD support on Tegra20"
|
|
depends on OF_CONTROL
|
|
help
|
|
Tegra20 supports video output to an attached LCD panel as well as
|
|
other options such as HDMI. Only the LCD is supported in U-Boot.
|
|
This option enables this support which can be used on devices which
|
|
have an LCD display connected.
|
|
|
|
config VIDEO_TEGRA124
|
|
bool "Enable video support on Tegra124"
|
|
depends on DM_VIDEO
|
|
help
|
|
Tegra124 supports many video output options including eDP and
|
|
HDMI. At present only eDP is supported by U-Boot. This option
|
|
enables this support which can be used on devices which
|
|
have an eDP display connected.
|
|
|
|
source "drivers/video/bridge/Kconfig"
|
|
|
|
source "drivers/video/imx/Kconfig"
|
|
|
|
config VIDEO
|
|
bool "Enable legacy video support"
|
|
depends on !DM_VIDEO
|
|
help
|
|
Define this for video support, without using driver model. Some
|
|
drivers use this because they are not yet converted to driver
|
|
model. Video drivers typically provide a colour text console and
|
|
cursor.
|
|
|
|
config CFB_CONSOLE
|
|
bool "Enable colour frame buffer console"
|
|
depends on VIDEO
|
|
default y if VIDEO
|
|
help
|
|
Enables the colour frame buffer driver. This supports colour
|
|
output on a bitmap display from an in-memory frame buffer.
|
|
Several colour devices are supported along with various options to
|
|
adjust the supported features. The driver is implemented in
|
|
cfb_console.c
|
|
|
|
The following defines are needed (cf. smiLynxEM, i8042)
|
|
VIDEO_FB_LITTLE_ENDIAN graphic memory organisation
|
|
(default big endian)
|
|
VIDEO_HW_RECTFILL graphic chip supports
|
|
rectangle fill (cf. smiLynxEM)
|
|
VIDEO_HW_BITBLT graphic chip supports
|
|
bit-blit (cf. smiLynxEM)
|
|
VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch)
|
|
VIDEO_VISIBLE_ROWS visible pixel rows
|
|
VIDEO_PIXEL_SIZE bytes per pixel
|
|
VIDEO_DATA_FORMAT graphic data format
|
|
(0-5, cf. cfb_console.c)
|
|
VIDEO_FB_ADRS framebuffer address
|
|
VIDEO_KBD_INIT_FCT keyboard int fct (i.e. rx51_kp_init())
|
|
VIDEO_TSTC_FCT test char fct (i.e. rx51_kp_tstc)
|
|
VIDEO_GETC_FCT get char fct (i.e. rx51_kp_getc)
|
|
CONFIG_VIDEO_LOGO display Linux logo in upper left corner
|
|
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of linux_logo.h
|
|
for logo. Requires CONFIG_VIDEO_LOGO
|
|
CONFIG_CONSOLE_EXTRA_INFO
|
|
additional board info beside
|
|
the logo
|
|
CONFIG_HIDE_LOGO_VERSION
|
|
do not display bootloader
|
|
version string
|
|
|
|
When CONFIG_CFB_CONSOLE is defined, the video console is the
|
|
default console. The serial console can be forced by setting the
|
|
environment 'console=serial'.
|
|
|
|
config CFB_CONSOLE_ANSI
|
|
bool "Support ANSI escape sequences"
|
|
depends on CFB_CONSOLE
|
|
help
|
|
This allows the colour buffer frame buffer driver to support
|
|
a limited number of ANSI escape sequences (cursor control,
|
|
erase functions and limited graphics rendition control). Normal
|
|
output from U-Boot will pass through this filter.
|
|
|
|
config VGA_AS_SINGLE_DEVICE
|
|
bool "Set the video as an output-only device"
|
|
depends on CFB_CONSOLE
|
|
default y
|
|
help
|
|
If enable the framebuffer device will be initialized as an
|
|
output-only device. The Keyboard driver will not be set up. This
|
|
may be used if you have no keyboard device, or more than one
|
|
(USB Keyboard, AT Keyboard).
|
|
|
|
config VIDEO_SW_CURSOR
|
|
bool "Enable a software cursor"
|
|
depends on CFB_CONSOLE
|
|
default y if CFB_CONSOLE
|
|
help
|
|
This draws a cursor after the last character. No blinking is
|
|
provided. This makes it possible to see the current cursor
|
|
position when entering text on the console. It is recommended to
|
|
enable this.
|
|
|
|
config CONSOLE_EXTRA_INFO
|
|
bool "Display additional board information"
|
|
depends on CFB_CONSOLE
|
|
help
|
|
Display additional board information strings that normally go to
|
|
the serial port. When this option is enabled, a board-specific
|
|
function video_get_info_str() is called to get the string for
|
|
each line of the display. The function should return the string,
|
|
which can be empty if there is nothing to display for that line.
|
|
|
|
config CONSOLE_SCROLL_LINES
|
|
int "Number of lines to scroll the console by"
|
|
depends on CFB_CONSOLE || DM_VIDEO || LCD
|
|
default 1
|
|
help
|
|
When the console need to be scrolled, this is the number of
|
|
lines to scroll by. It defaults to 1. Increasing this makes the
|
|
console jump but can help speed up operation when scrolling
|
|
is slow.
|
|
|
|
config SYS_CONSOLE_BG_COL
|
|
hex "Background colour"
|
|
depends on CFB_CONSOLE
|
|
default 0x00
|
|
help
|
|
Defines the background colour for the console. The value is from
|
|
0x00 to 0xff and the meaning depends on the graphics card.
|
|
Typically, 0x00 means black and 0xff means white. Do not set
|
|
the background and foreground to the same colour or you will see
|
|
nothing.
|
|
|
|
config SYS_CONSOLE_FG_COL
|
|
hex "Foreground colour"
|
|
depends on CFB_CONSOLE
|
|
default 0xa0
|
|
help
|
|
Defines the foreground colour for the console. The value is from
|
|
0x00 to 0xff and the meaning depends on the graphics card.
|
|
Typically, 0x00 means black and 0xff means white. Do not set
|
|
the background and foreground to the same colour or you will see
|
|
nothing.
|
|
|
|
config LCD
|
|
bool "Enable legacy LCD support"
|
|
help
|
|
Define this to enable LCD support (for output to LCD display).
|
|
You will also need to select an LCD driver using an additional
|
|
CONFIG option. See the README for details. Drives which have been
|
|
converted to driver model will instead used CONFIG_DM_VIDEO.
|
|
|
|
config VIDEO_DW_HDMI
|
|
bool
|
|
help
|
|
Enables the common driver code for the Designware HDMI TX
|
|
block found in SoCs from various vendors.
|
|
As this does not provide any functionality by itself (but
|
|
rather requires a SoC-specific glue driver to call it), it
|
|
can not be enabled from the configuration menu.
|
|
|
|
config VIDEO_DSI_HOST_SANDBOX
|
|
bool "Enable sandbox for dsi host"
|
|
depends on SANDBOX
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Enable support for sandbox dsi host device used for testing
|
|
purposes.
|
|
Display Serial Interface (DSI) defines a serial bus and
|
|
a communication protocol between the host and the device
|
|
(panel, bridge).
|
|
|
|
config VIDEO_DW_MIPI_DSI
|
|
bool
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Enables the common driver code for the Synopsis Designware
|
|
MIPI DSI block found in SoCs from various vendors.
|
|
As this does not provide any functionality by itself (but
|
|
rather requires a SoC-specific glue driver to call it), it
|
|
can not be enabled from the configuration menu.
|
|
|
|
config VIDEO_SIMPLE
|
|
bool "Simple display driver for preconfigured display"
|
|
help
|
|
Enables a simple generic display driver which utilizes the
|
|
simple-framebuffer devicetree bindings.
|
|
|
|
This driver assumes that the display hardware has been initialized
|
|
before u-boot starts, and u-boot will simply render to the pre-
|
|
allocated frame buffer surface.
|
|
|
|
config VIDEO_DT_SIMPLEFB
|
|
bool "Enable SimpleFB support for passing framebuffer to OS"
|
|
help
|
|
Enables the code to pass the framebuffer to the kernel as a
|
|
simple framebuffer in the device tree.
|
|
The video output is initialized by U-Boot, and kept by the
|
|
kernel.
|
|
|
|
config OSD
|
|
bool "Enable OSD support"
|
|
depends on DM
|
|
default n
|
|
help
|
|
This supports drivers that provide a OSD (on-screen display), which
|
|
is a (usually text-oriented) graphics buffer to show information on
|
|
a display.
|
|
|
|
config SANDBOX_OSD
|
|
bool "Enable sandbox OSD"
|
|
depends on OSD
|
|
help
|
|
Enable support for sandbox OSD device used for testing purposes.
|
|
|
|
config IHS_VIDEO_OUT
|
|
bool "Enable IHS video out driver"
|
|
depends on OSD
|
|
help
|
|
Enable support for the gdsys Integrated Hardware Systems (IHS) video
|
|
out On-screen Display (OSD) used on gdsys FPGAs to control dynamic
|
|
textual overlays of the display outputs.
|
|
|
|
endmenu
|