Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 22:03:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/mpc8568mds/mpc8568mds.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

355 lines
7.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <ioports.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include "bcsr.h"
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GETH1 */
{4, 10, 1, 0, 2}, /* TxD0 */
{4, 9, 1, 0, 2}, /* TxD1 */
{4, 8, 1, 0, 2}, /* TxD2 */
{4, 7, 1, 0, 2}, /* TxD3 */
{4, 23, 1, 0, 2}, /* TxD4 */
{4, 22, 1, 0, 2}, /* TxD5 */
{4, 21, 1, 0, 2}, /* TxD6 */
{4, 20, 1, 0, 2}, /* TxD7 */
{4, 15, 2, 0, 2}, /* RxD0 */
{4, 14, 2, 0, 2}, /* RxD1 */
{4, 13, 2, 0, 2}, /* RxD2 */
{4, 12, 2, 0, 2}, /* RxD3 */
{4, 29, 2, 0, 2}, /* RxD4 */
{4, 28, 2, 0, 2}, /* RxD5 */
{4, 27, 2, 0, 2}, /* RxD6 */
{4, 26, 2, 0, 2}, /* RxD7 */
{4, 11, 1, 0, 2}, /* TX_EN */
{4, 24, 1, 0, 2}, /* TX_ER */
{4, 16, 2, 0, 2}, /* RX_DV */
{4, 30, 2, 0, 2}, /* RX_ER */
{4, 17, 2, 0, 2}, /* RX_CLK */
{4, 19, 1, 0, 2}, /* GTX_CLK */
{1, 31, 2, 0, 3}, /* GTX125 */
/* GETH2 */
{5, 10, 1, 0, 2}, /* TxD0 */
{5, 9, 1, 0, 2}, /* TxD1 */
{5, 8, 1, 0, 2}, /* TxD2 */
{5, 7, 1, 0, 2}, /* TxD3 */
{5, 23, 1, 0, 2}, /* TxD4 */
{5, 22, 1, 0, 2}, /* TxD5 */
{5, 21, 1, 0, 2}, /* TxD6 */
{5, 20, 1, 0, 2}, /* TxD7 */
{5, 15, 2, 0, 2}, /* RxD0 */
{5, 14, 2, 0, 2}, /* RxD1 */
{5, 13, 2, 0, 2}, /* RxD2 */
{5, 12, 2, 0, 2}, /* RxD3 */
{5, 29, 2, 0, 2}, /* RxD4 */
{5, 28, 2, 0, 2}, /* RxD5 */
{5, 27, 2, 0, 3}, /* RxD6 */
{5, 26, 2, 0, 2}, /* RxD7 */
{5, 11, 1, 0, 2}, /* TX_EN */
{5, 24, 1, 0, 2}, /* TX_ER */
{5, 16, 2, 0, 2}, /* RX_DV */
{5, 30, 2, 0, 2}, /* RX_ER */
{5, 17, 2, 0, 2}, /* RX_CLK */
{5, 19, 1, 0, 2}, /* GTX_CLK */
{1, 31, 2, 0, 3}, /* GTX125 */
{4, 6, 3, 0, 2}, /* MDIO */
{4, 5, 1, 0, 2}, /* MDC */
/* UART1 */
{2, 0, 1, 0, 2}, /* UART_SOUT1 */
{2, 1, 1, 0, 2}, /* UART_RTS1 */
{2, 2, 2, 0, 2}, /* UART_CTS1 */
{2, 3, 2, 0, 2}, /* UART_SIN1 */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
void local_bus_init(void);
int board_early_init_f (void)
{
/*
* Initialize local bus.
*/
local_bus_init ();
enable_8568mds_duart();
enable_8568mds_flash_write();
#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
reset_8568mds_uccs();
#endif
#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
enable_8568mds_qe_mdio();
#endif
#ifdef CONFIG_SYS_I2C2_OFFSET
/* Enable I2C2_SCL and I2C2_SDA */
volatile struct par_io *port_c;
port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
port_c->cpdir2 |= 0x0f000000;
port_c->cppar2 &= ~0x0f000000;
port_c->cppar2 |= 0x0a000000;
#endif
return 0;
}
int checkboard (void)
{
printf ("Board: 8568 MDS\n");
return 0;
}
/*
* Initialize Local Bus
*/
void
local_bus_init(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
gur->lbiuiplldcr1 = 0x00078080;
if (clkdiv == 16) {
gur->lbiuiplldcr0 = 0x7c0f1bf0;
} else if (clkdiv == 8) {
gur->lbiuiplldcr0 = 0x6c0f1bf0;
} else if (clkdiv == 4) {
gur->lbiuiplldcr0 = 0x5c0f1bf0;
}
lbc->lcrr |= 0x00030000;
asm("sync;isync;msync");
}
/*
* Initialize SDRAM memory on the Local Bus.
*/
void lbc_sdram_init(void)
{
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
uint idx;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint lsdmr_common;
puts("LBC SDRAM: ");
print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
"\n ");
/*
* Setup SDRAM Base and Option Registers
*/
set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
asm("msync");
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
asm("msync");
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
asm("msync");
/*
* MPC8568 uses "new" 15-16 style addressing.
*/
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
lsdmr_common |= LSDMR_BSMA1516;
/*
* Issue PRECHARGE ALL command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
/*
* Issue 8 AUTO REFRESH commands.
*/
for (idx = 0; idx < 8; idx++) {
lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
}
/*
* Issue 8 MODE-set command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(100);
/*
* Issue NORMAL OP command.
*/
lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
udelay(200); /* Overkill. Must wait > 200 bus cycles */
#endif /* enable SDRAM init */
}
#if defined(CONFIG_PCI)
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc8568mds_config_table[] = {
{
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
pci_cfgfunc_config_device,
{PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
},
{}
};
#endif
static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
/*
* pib_init() -- Initialize the PCA9555 IO expander on the PIB board
*/
void
pib_init(void)
{
u8 val8, orig_i2c_bus;
/*
* Assign PIB PMC2/3 to PCI bus
*/
/*switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(1);
val8 = 0x00;
i2c_write(0x23, 0x6, 1, &val8, 1);
i2c_write(0x23, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x23, 0x2, 1, &val8, 1);
i2c_write(0x23, 0x3, 1, &val8, 1);
val8 = 0x00;
i2c_write(0x26, 0x6, 1, &val8, 1);
val8 = 0x34;
i2c_write(0x26, 0x7, 1, &val8, 1);
val8 = 0xf9;
i2c_write(0x26, 0x2, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x26, 0x3, 1, &val8, 1);
val8 = 0x00;
i2c_write(0x27, 0x6, 1, &val8, 1);
i2c_write(0x27, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x27, 0x2, 1, &val8, 1);
val8 = 0xef;
i2c_write(0x27, 0x3, 1, &val8, 1);
asm("eieio");
i2c_set_bus_num(orig_i2c_bus);
}
#ifdef CONFIG_PCI
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int first_free_busno = 0;
#ifdef CONFIG_PCI1
struct fsl_pci_info pci_info;
u32 devdisr, pordevsr, io_sel;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
porpllsr = in_be32(&gur->porpllsr);
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
pci_speed = 66666000;
pci_32 = 1;
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info, 1);
set_next_law(pci_info.mem_phys,
law_size_bits(pci_info.mem_size), pci_info.law);
set_next_law(pci_info.io_phys,
law_size_bits(pci_info.io_size), pci_info.law);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
pci_info.regs);
#ifndef CONFIG_PCI_PNP
pci1_hose.config_table = pci_mpc8568mds_config_table;
#endif
first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
printf("PCI: disabled\n");
}
puts("\n");
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
fsl_pcie_init_board(first_free_busno);
}
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink