mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
243 lines
7 KiB
C
243 lines
7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014, Barco (www.barco.com)
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
|
|
#include "platinum.h"
|
|
|
|
#define GPIO_IP_NCONFIG IMX_GPIO_NR(5, 18)
|
|
#define GPIO_HK_NCONFIG IMX_GPIO_NR(7, 13)
|
|
#define GPIO_LS_NCONFIG IMX_GPIO_NR(5, 19)
|
|
|
|
#define GPIO_I2C0_SEL0 IMX_GPIO_NR(5, 2)
|
|
#define GPIO_I2C0_SEL1 IMX_GPIO_NR(1, 11)
|
|
#define GPIO_I2C0_ENBN IMX_GPIO_NR(1, 13)
|
|
|
|
#define GPIO_I2C2_SEL0 IMX_GPIO_NR(1, 17)
|
|
#define GPIO_I2C2_SEL1 IMX_GPIO_NR(1, 20)
|
|
#define GPIO_I2C2_ENBN IMX_GPIO_NR(1, 14)
|
|
|
|
#define GPIO_USB_RESET IMX_GPIO_NR(1, 5)
|
|
|
|
iomux_v3_cfg_t const ecspi1_pads[] = {
|
|
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK),
|
|
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
|
|
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
|
|
MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
};
|
|
|
|
iomux_v3_cfg_t const ecspi2_pads[] = {
|
|
MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK),
|
|
MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
|
|
MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
|
|
MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
MX6_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads[] = {
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
/* PHY nRESET */
|
|
iomux_v3_cfg_t const phy_reset_pad = {
|
|
MX6_PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart4_pads[] = {
|
|
MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart5_pads[] = {
|
|
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const i2c0_mux_pads[] = {
|
|
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const i2c2_mux_pads[] = {
|
|
MX6_PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info0 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL,
|
|
.gp = IMX_GPIO_NR(5, 27)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
|
|
.gp = IMX_GPIO_NR(5, 26)
|
|
}
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info2 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL,
|
|
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
};
|
|
|
|
/*
|
|
* This enet related pin-muxing and GPIO handling is done
|
|
* in SPL U-Boot. For early initialization. And to give the
|
|
* PHY some time to come out of reset before the U-Boot
|
|
* ethernet driver tries to access its registers via MDIO.
|
|
*/
|
|
int platinum_setup_enet(void)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
unsigned phy_reset = IMX_GPIO_NR(1, 19);
|
|
|
|
/* First configure PHY reset GPIO pin */
|
|
imx_iomux_v3_setup_pad(phy_reset_pad);
|
|
|
|
/* Reconfigure enet muxing while PHY is in reset */
|
|
gpio_direction_output(phy_reset, 0);
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
|
mdelay(10);
|
|
gpio_set_value(phy_reset, 1);
|
|
udelay(100);
|
|
|
|
/* set GPIO_16 as ENET_REF_CLK_OUT */
|
|
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
|
|
|
return enable_fec_anatop_clock(0, ENET_50MHZ);
|
|
}
|
|
|
|
int platinum_setup_i2c(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(i2c0_mux_pads,
|
|
ARRAY_SIZE(i2c0_mux_pads));
|
|
imx_iomux_v3_setup_multiple_pads(i2c2_mux_pads,
|
|
ARRAY_SIZE(i2c2_mux_pads));
|
|
|
|
mdelay(10);
|
|
|
|
/* Disable i2c mux 0 */
|
|
gpio_direction_output(GPIO_I2C0_SEL0, 0);
|
|
gpio_direction_output(GPIO_I2C0_SEL1, 0);
|
|
gpio_direction_output(GPIO_I2C0_ENBN, 1);
|
|
|
|
/* Disable i2c mux 1 */
|
|
gpio_direction_output(GPIO_I2C2_SEL0, 0);
|
|
gpio_direction_output(GPIO_I2C2_SEL1, 0);
|
|
gpio_direction_output(GPIO_I2C2_ENBN, 1);
|
|
|
|
udelay(10);
|
|
|
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
|
|
|
|
/* Disable all leds */
|
|
i2c_set_bus_num(0);
|
|
i2c_reg_write(0x60, 0x05, 0x55);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_setup_spi(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
|
|
imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_setup_uart(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
|
|
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_phy_config(struct phy_device *phydev)
|
|
{
|
|
/* Use generic infrastructure, no specific setup */
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_gpio(void)
|
|
{
|
|
/* Reset FPGA's */
|
|
gpio_direction_output(GPIO_IP_NCONFIG, 0);
|
|
gpio_direction_output(GPIO_HK_NCONFIG, 0);
|
|
gpio_direction_output(GPIO_LS_NCONFIG, 0);
|
|
udelay(3);
|
|
gpio_set_value(GPIO_IP_NCONFIG, 1);
|
|
gpio_set_value(GPIO_HK_NCONFIG, 1);
|
|
gpio_set_value(GPIO_LS_NCONFIG, 1);
|
|
|
|
/* no dmd configuration yet */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_usb(void)
|
|
{
|
|
/* Reset usb hub */
|
|
gpio_direction_output(GPIO_USB_RESET, 0);
|
|
udelay(100);
|
|
gpio_set_value(GPIO_USB_RESET, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_finished(void)
|
|
{
|
|
/* Enable led 0 */
|
|
i2c_set_bus_num(0);
|
|
i2c_reg_write(0x60, 0x05, 0x54);
|
|
|
|
return 0;
|
|
}
|