mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 17:28:15 +00:00
c64ac3b318
Use the new a3700_fdt_fix_pcie_regions function in turris_mox.c so that MOX boards with 4 GB RAM are fully supported. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
808 lines
18 KiB
C
808 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <fdt_support.h>
|
|
#include <init.h>
|
|
#include <linux/libfdt.h>
|
|
#include <linux/string.h>
|
|
#include <miiphy.h>
|
|
#include <mvebu/comphy.h>
|
|
#include <spi.h>
|
|
|
|
#include "mox_sp.h"
|
|
|
|
#define MAX_MOX_MODULES 10
|
|
|
|
#define MOX_MODULE_SFP 0x1
|
|
#define MOX_MODULE_PCI 0x2
|
|
#define MOX_MODULE_TOPAZ 0x3
|
|
#define MOX_MODULE_PERIDOT 0x4
|
|
#define MOX_MODULE_USB3 0x5
|
|
#define MOX_MODULE_PASSPCI 0x6
|
|
|
|
#define ARMADA_37XX_NB_GPIO_SEL (MVEBU_REGISTER(0x13830))
|
|
#define ARMADA_37XX_SPI_CTRL (MVEBU_REGISTER(0x10600))
|
|
#define ARMADA_37XX_SPI_CFG (MVEBU_REGISTER(0x10604))
|
|
#define ARMADA_37XX_SPI_DOUT (MVEBU_REGISTER(0x10608))
|
|
#define ARMADA_37XX_SPI_DIN (MVEBU_REGISTER(0x1060c))
|
|
|
|
#define ETH1_PATH "/soc/internal-regs@d0000000/ethernet@40000"
|
|
#define MDIO_PATH "/soc/internal-regs@d0000000/mdio@32004"
|
|
#define SFP_GPIO_PATH "/soc/internal-regs@d0000000/spi@10600/moxtet@1/gpio@0"
|
|
#define PCIE_PATH "/soc/pcie@d0070000"
|
|
#define SFP_PATH "/sfp"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_OF_BOARD_FIXUP)
|
|
int board_fix_fdt(void *blob)
|
|
{
|
|
u8 topology[MAX_MOX_MODULES];
|
|
int i, size, node;
|
|
bool enable;
|
|
|
|
/*
|
|
* SPI driver is not loaded in driver model yet, but we have to find out
|
|
* if pcie should be enabled in U-Boot's device tree. Therefore we have
|
|
* to read SPI by reading/writing SPI registers directly
|
|
*/
|
|
|
|
writel(0x10df, ARMADA_37XX_SPI_CFG);
|
|
/* put pin from GPIO to SPI mode */
|
|
clrbits_le32(ARMADA_37XX_NB_GPIO_SEL, BIT(12));
|
|
/* enable SPI CS1 */
|
|
setbits_le32(ARMADA_37XX_SPI_CTRL, BIT(17));
|
|
|
|
while (!(readl(ARMADA_37XX_SPI_CTRL) & 0x2))
|
|
udelay(1);
|
|
|
|
for (i = 0; i < MAX_MOX_MODULES; ++i) {
|
|
writel(0x0, ARMADA_37XX_SPI_DOUT);
|
|
|
|
while (!(readl(ARMADA_37XX_SPI_CTRL) & 0x2))
|
|
udelay(1);
|
|
|
|
topology[i] = readl(ARMADA_37XX_SPI_DIN) & 0xff;
|
|
if (topology[i] == 0xff)
|
|
break;
|
|
|
|
topology[i] &= 0xf;
|
|
}
|
|
|
|
size = i;
|
|
|
|
/* disable SPI CS1 */
|
|
clrbits_le32(ARMADA_37XX_SPI_CTRL, BIT(17));
|
|
|
|
if (size > 1 && (topology[1] == MOX_MODULE_PCI ||
|
|
topology[1] == MOX_MODULE_USB3 ||
|
|
topology[1] == MOX_MODULE_PASSPCI))
|
|
enable = true;
|
|
else
|
|
enable = false;
|
|
|
|
node = fdt_path_offset(blob, PCIE_PATH);
|
|
|
|
if (node < 0) {
|
|
printf("Cannot find PCIe node in U-Boot's device tree!\n");
|
|
return 0;
|
|
}
|
|
|
|
if (fdt_setprop_string(blob, node, "status",
|
|
enable ? "okay" : "disabled") < 0) {
|
|
printf("Cannot %s PCIe in U-Boot's device tree!\n",
|
|
enable ? "enable" : "disable");
|
|
return 0;
|
|
}
|
|
|
|
if (a3700_fdt_fix_pcie_regions(blob) < 0) {
|
|
printf("Cannot fix PCIe regions in U-Boot's device tree!\n");
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mox_do_spi(u8 *in, u8 *out, size_t size)
|
|
{
|
|
struct spi_slave *slave;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = spi_get_bus_and_cs(0, 1, 1000000, SPI_CPHA | SPI_CPOL,
|
|
"spi_generic_drv", "moxtet@1", &dev,
|
|
&slave);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = spi_claim_bus(slave);
|
|
if (ret)
|
|
goto fail_free;
|
|
|
|
ret = spi_xfer(slave, size * 8, out, in, SPI_XFER_ONCE);
|
|
|
|
spi_release_bus(slave);
|
|
fail_free:
|
|
spi_free_slave(slave);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd)
|
|
{
|
|
static int is_sd;
|
|
static u8 topology[MAX_MOX_MODULES - 1];
|
|
static int size;
|
|
u8 din[MAX_MOX_MODULES], dout[MAX_MOX_MODULES];
|
|
int ret, i;
|
|
|
|
if (size) {
|
|
if (ptopology)
|
|
*ptopology = topology;
|
|
if (psize)
|
|
*psize = size;
|
|
if (pis_sd)
|
|
*pis_sd = is_sd;
|
|
return 0;
|
|
}
|
|
|
|
memset(din, 0, MAX_MOX_MODULES);
|
|
memset(dout, 0, MAX_MOX_MODULES);
|
|
|
|
ret = mox_do_spi(din, dout, MAX_MOX_MODULES);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (din[0] == 0x10)
|
|
is_sd = 1;
|
|
else if (din[0] == 0x00)
|
|
is_sd = 0;
|
|
else
|
|
return -ENODEV;
|
|
|
|
for (i = 1; i < MAX_MOX_MODULES && din[i] != 0xff; ++i)
|
|
topology[i - 1] = din[i] & 0xf;
|
|
size = i - 1;
|
|
|
|
if (ptopology)
|
|
*ptopology = topology;
|
|
if (psize)
|
|
*psize = size;
|
|
if (pis_sd)
|
|
*pis_sd = is_sd;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int comphy_update_map(struct comphy_map *serdes_map, int count)
|
|
{
|
|
int ret, i, size, sfpindex = -1, swindex = -1;
|
|
const u8 *topology;
|
|
|
|
ret = mox_get_topology(&topology, &size, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < size; ++i) {
|
|
if (topology[i] == MOX_MODULE_SFP && sfpindex == -1)
|
|
sfpindex = i;
|
|
else if ((topology[i] == MOX_MODULE_TOPAZ ||
|
|
topology[i] == MOX_MODULE_PERIDOT) &&
|
|
swindex == -1)
|
|
swindex = i;
|
|
}
|
|
|
|
if (sfpindex >= 0 && swindex >= 0) {
|
|
if (sfpindex < swindex)
|
|
serdes_map[0].speed = PHY_SPEED_1_25G;
|
|
else
|
|
serdes_map[0].speed = PHY_SPEED_3_125G;
|
|
} else if (sfpindex >= 0) {
|
|
serdes_map[0].speed = PHY_SPEED_1_25G;
|
|
} else if (swindex >= 0) {
|
|
serdes_map[0].speed = PHY_SPEED_3_125G;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SW_SMI_CMD_R(d, r) (0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
|
|
#define SW_SMI_CMD_W(d, r) (0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
|
|
|
|
static int sw_multi_read(struct mii_dev *bus, int sw, int dev, int reg)
|
|
{
|
|
bus->write(bus, sw, 0, 0, SW_SMI_CMD_R(dev, reg));
|
|
mdelay(5);
|
|
return bus->read(bus, sw, 0, 1);
|
|
}
|
|
|
|
static void sw_multi_write(struct mii_dev *bus, int sw, int dev, int reg,
|
|
u16 val)
|
|
{
|
|
bus->write(bus, sw, 0, 1, val);
|
|
bus->write(bus, sw, 0, 0, SW_SMI_CMD_W(dev, reg));
|
|
mdelay(5);
|
|
}
|
|
|
|
static int sw_scratch_read(struct mii_dev *bus, int sw, int reg)
|
|
{
|
|
sw_multi_write(bus, sw, 0x1c, 0x1a, (reg & 0x7f) << 8);
|
|
return sw_multi_read(bus, sw, 0x1c, 0x1a) & 0xff;
|
|
}
|
|
|
|
static void sw_led_write(struct mii_dev *bus, int sw, int port, int reg,
|
|
u16 val)
|
|
{
|
|
sw_multi_write(bus, sw, port, 0x16, 0x8000 | ((reg & 7) << 12)
|
|
| (val & 0x7ff));
|
|
}
|
|
|
|
static void sw_blink_leds(struct mii_dev *bus, int peridot, int topaz)
|
|
{
|
|
int i, p;
|
|
struct {
|
|
int port;
|
|
u16 val;
|
|
int wait;
|
|
} regs[] = {
|
|
{ 2, 0xef, 1 }, { 2, 0xfe, 1 }, { 2, 0x33, 0 },
|
|
{ 4, 0xef, 1 }, { 4, 0xfe, 1 }, { 4, 0x33, 0 },
|
|
{ 3, 0xfe, 1 }, { 3, 0xef, 1 }, { 3, 0x33, 0 },
|
|
{ 1, 0xfe, 1 }, { 1, 0xef, 1 }, { 1, 0x33, 0 }
|
|
};
|
|
|
|
for (i = 0; i < 12; ++i) {
|
|
for (p = 0; p < peridot; ++p) {
|
|
sw_led_write(bus, 0x10 + p, regs[i].port, 0,
|
|
regs[i].val);
|
|
sw_led_write(bus, 0x10 + p, regs[i].port + 4, 0,
|
|
regs[i].val);
|
|
}
|
|
if (topaz) {
|
|
sw_led_write(bus, 0x2, 0x10 + regs[i].port, 0,
|
|
regs[i].val);
|
|
}
|
|
|
|
if (regs[i].wait)
|
|
mdelay(75);
|
|
}
|
|
}
|
|
|
|
static void check_switch_address(struct mii_dev *bus, int addr)
|
|
{
|
|
if (sw_scratch_read(bus, addr, 0x70) >> 3 != addr)
|
|
printf("Check of switch MDIO address failed for 0x%02x\n",
|
|
addr);
|
|
}
|
|
|
|
static int sfp, pci, topaz, peridot, usb, passpci;
|
|
static int sfp_pos, peridot_pos[3];
|
|
static int module_count;
|
|
|
|
static int configure_peridots(struct gpio_desc *reset_gpio)
|
|
{
|
|
int i, ret;
|
|
u8 dout[MAX_MOX_MODULES];
|
|
|
|
memset(dout, 0, MAX_MOX_MODULES);
|
|
|
|
/* set addresses of Peridot modules */
|
|
for (i = 0; i < peridot; ++i)
|
|
dout[module_count - peridot_pos[i]] = (~i) & 3;
|
|
|
|
/*
|
|
* if there is a SFP module connected to the last Peridot module, set
|
|
* the P10_SMODE to 1 for the Peridot module
|
|
*/
|
|
if (sfp)
|
|
dout[module_count - peridot_pos[i - 1]] |= 1 << 3;
|
|
|
|
dm_gpio_set_value(reset_gpio, 1);
|
|
mdelay(10);
|
|
|
|
ret = mox_do_spi(NULL, dout, module_count + 1);
|
|
|
|
mdelay(10);
|
|
dm_gpio_set_value(reset_gpio, 0);
|
|
|
|
mdelay(50);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int get_reset_gpio(struct gpio_desc *reset_gpio)
|
|
{
|
|
int node;
|
|
|
|
node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, "cznic,moxtet");
|
|
if (node < 0) {
|
|
printf("Cannot find Moxtet bus device node!\n");
|
|
return -1;
|
|
}
|
|
|
|
gpio_request_by_name_nodev(offset_to_ofnode(node), "reset-gpios", 0,
|
|
reset_gpio, GPIOD_IS_OUT);
|
|
|
|
if (!dm_gpio_is_valid(reset_gpio)) {
|
|
printf("Cannot find reset GPIO for Moxtet bus!\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
int ret;
|
|
u8 mac1[6], mac2[6];
|
|
|
|
ret = mbox_sp_get_board_info(NULL, mac1, mac2, NULL, NULL);
|
|
if (ret < 0) {
|
|
printf("Cannot read data from OTP!\n");
|
|
return 0;
|
|
}
|
|
|
|
if (is_valid_ethaddr(mac1) && !env_get("ethaddr"))
|
|
eth_env_set_enetaddr("ethaddr", mac1);
|
|
|
|
if (is_valid_ethaddr(mac2) && !env_get("eth1addr"))
|
|
eth_env_set_enetaddr("eth1addr", mac2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mox_print_info(void)
|
|
{
|
|
int ret, board_version, ram_size;
|
|
u64 serial_number;
|
|
const char *pub_key;
|
|
|
|
ret = mbox_sp_get_board_info(&serial_number, NULL, NULL, &board_version,
|
|
&ram_size);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
printf("Turris Mox:\n");
|
|
printf(" Board version: %i\n", board_version);
|
|
printf(" RAM size: %i MiB\n", ram_size);
|
|
printf(" Serial Number: %016llX\n", serial_number);
|
|
|
|
pub_key = mox_sp_get_ecdsa_public_key();
|
|
if (pub_key)
|
|
printf(" ECDSA Public Key: %s\n", pub_key);
|
|
else
|
|
printf("Cannot read ECDSA Public Key\n");
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
int ret, i;
|
|
const u8 *topology;
|
|
int is_sd;
|
|
struct mii_dev *bus;
|
|
struct gpio_desc reset_gpio = {};
|
|
|
|
mox_print_info();
|
|
|
|
ret = mox_get_topology(&topology, &module_count, &is_sd);
|
|
if (ret) {
|
|
printf("Cannot read module topology!\n");
|
|
return 0;
|
|
}
|
|
|
|
printf(" SD/eMMC version: %s\n", is_sd ? "SD" : "eMMC");
|
|
|
|
if (module_count)
|
|
printf("Module Topology:\n");
|
|
|
|
for (i = 0; i < module_count; ++i) {
|
|
switch (topology[i]) {
|
|
case MOX_MODULE_SFP:
|
|
printf("% 4i: SFP Module\n", i + 1);
|
|
break;
|
|
case MOX_MODULE_PCI:
|
|
printf("% 4i: Mini-PCIe Module\n", i + 1);
|
|
break;
|
|
case MOX_MODULE_TOPAZ:
|
|
printf("% 4i: Topaz Switch Module (4-port)\n", i + 1);
|
|
break;
|
|
case MOX_MODULE_PERIDOT:
|
|
printf("% 4i: Peridot Switch Module (8-port)\n", i + 1);
|
|
break;
|
|
case MOX_MODULE_USB3:
|
|
printf("% 4i: USB 3.0 Module (4 ports)\n", i + 1);
|
|
break;
|
|
case MOX_MODULE_PASSPCI:
|
|
printf("% 4i: Passthrough Mini-PCIe Module\n", i + 1);
|
|
break;
|
|
default:
|
|
printf("% 4i: unknown (ID %i)\n", i + 1, topology[i]);
|
|
}
|
|
}
|
|
|
|
/* now check if modules are connected in supported mode */
|
|
|
|
for (i = 0; i < module_count; ++i) {
|
|
switch (topology[i]) {
|
|
case MOX_MODULE_SFP:
|
|
if (sfp) {
|
|
printf("Error: Only one SFP module is supported!\n");
|
|
} else if (topaz) {
|
|
printf("Error: SFP module cannot be connected after Topaz Switch module!\n");
|
|
} else {
|
|
sfp_pos = i;
|
|
++sfp;
|
|
}
|
|
break;
|
|
case MOX_MODULE_PCI:
|
|
if (pci)
|
|
printf("Error: Only one Mini-PCIe module is supported!\n");
|
|
else if (usb)
|
|
printf("Error: Mini-PCIe module cannot come after USB 3.0 module!\n");
|
|
else if (i && (i != 1 || !passpci))
|
|
printf("Error: Mini-PCIe module should be the first connected module or come right after Passthrough Mini-PCIe module!\n");
|
|
else
|
|
++pci;
|
|
break;
|
|
case MOX_MODULE_TOPAZ:
|
|
if (topaz)
|
|
printf("Error: Only one Topaz module is supported!\n");
|
|
else if (peridot >= 3)
|
|
printf("Error: At most two Peridot modules can come before Topaz module!\n");
|
|
else
|
|
++topaz;
|
|
break;
|
|
case MOX_MODULE_PERIDOT:
|
|
if (sfp || topaz) {
|
|
printf("Error: Peridot module must come before SFP or Topaz module!\n");
|
|
} else if (peridot >= 3) {
|
|
printf("Error: At most three Peridot modules are supported!\n");
|
|
} else {
|
|
peridot_pos[peridot] = i;
|
|
++peridot;
|
|
}
|
|
break;
|
|
case MOX_MODULE_USB3:
|
|
if (pci)
|
|
printf("Error: USB 3.0 module cannot come after Mini-PCIe module!\n");
|
|
else if (usb)
|
|
printf("Error: Only one USB 3.0 module is supported!\n");
|
|
else if (i && (i != 1 || !passpci))
|
|
printf("Error: USB 3.0 module should be the first connected module or come right after Passthrough Mini-PCIe module!\n");
|
|
else
|
|
++usb;
|
|
break;
|
|
case MOX_MODULE_PASSPCI:
|
|
if (passpci)
|
|
printf("Error: Only one Passthrough Mini-PCIe module is supported!\n");
|
|
else if (i != 0)
|
|
printf("Error: Passthrough Mini-PCIe module should be the first connected module!\n");
|
|
else
|
|
++passpci;
|
|
}
|
|
}
|
|
|
|
/* now configure modules */
|
|
|
|
if (get_reset_gpio(&reset_gpio) < 0)
|
|
return 0;
|
|
|
|
if (peridot > 0) {
|
|
if (configure_peridots(&reset_gpio) < 0) {
|
|
printf("Cannot configure Peridot modules!\n");
|
|
peridot = 0;
|
|
}
|
|
} else {
|
|
dm_gpio_set_value(&reset_gpio, 1);
|
|
mdelay(50);
|
|
dm_gpio_set_value(&reset_gpio, 0);
|
|
mdelay(50);
|
|
}
|
|
|
|
if (peridot || topaz) {
|
|
/*
|
|
* now check if the addresses are set by reading Scratch & Misc
|
|
* register 0x70 of Peridot (and potentially Topaz) modules
|
|
*/
|
|
|
|
bus = miiphy_get_dev_by_name("neta@30000");
|
|
if (!bus) {
|
|
printf("Cannot get MDIO bus device!\n");
|
|
} else {
|
|
for (i = 0; i < peridot; ++i)
|
|
check_switch_address(bus, 0x10 + i);
|
|
|
|
if (topaz)
|
|
check_switch_address(bus, 0x2);
|
|
|
|
sw_blink_leds(bus, peridot, topaz);
|
|
}
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
|
|
static int vnode_by_path(void *blob, const char *fmt, va_list ap)
|
|
{
|
|
char path[128];
|
|
|
|
vsnprintf(path, 128, fmt, ap);
|
|
return fdt_path_offset(blob, path);
|
|
}
|
|
|
|
static int node_by_path(void *blob, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int res;
|
|
|
|
va_start(ap, fmt);
|
|
res = vnode_by_path(blob, fmt, ap);
|
|
va_end(ap);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int phandle_by_path(void *blob, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int node, phandle, res;
|
|
|
|
va_start(ap, fmt);
|
|
node = vnode_by_path(blob, fmt, ap);
|
|
va_end(ap);
|
|
|
|
if (node < 0)
|
|
return node;
|
|
|
|
phandle = fdt_get_phandle(blob, node);
|
|
if (phandle > 0)
|
|
return phandle;
|
|
|
|
phandle = fdt_get_max_phandle(blob);
|
|
if (phandle < 0)
|
|
return phandle;
|
|
|
|
phandle += 1;
|
|
|
|
res = fdt_setprop_u32(blob, node, "linux,phandle", phandle);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
res = fdt_setprop_u32(blob, node, "phandle", phandle);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
return phandle;
|
|
}
|
|
|
|
static int enable_by_path(void *blob, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int node;
|
|
|
|
va_start(ap, fmt);
|
|
node = vnode_by_path(blob, fmt, ap);
|
|
va_end(ap);
|
|
|
|
if (node < 0)
|
|
return node;
|
|
|
|
return fdt_setprop_string(blob, node, "status", "okay");
|
|
}
|
|
|
|
static bool is_topaz(int id)
|
|
{
|
|
return topaz && id == peridot + topaz - 1;
|
|
}
|
|
|
|
static int switch_addr(int id)
|
|
{
|
|
return is_topaz(id) ? 0x2 : 0x10 + id;
|
|
}
|
|
|
|
static int setup_switch(void *blob, int id)
|
|
{
|
|
int res, addr, i, node, phandle;
|
|
|
|
addr = switch_addr(id);
|
|
|
|
/* first enable the switch by setting status = "okay" */
|
|
res = enable_by_path(blob, MDIO_PATH "/switch%i@%x", id, addr);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
/*
|
|
* now if there are more switches or a SFP module coming after,
|
|
* enable corresponding ports
|
|
*/
|
|
if (id < peridot + topaz - 1) {
|
|
res = enable_by_path(blob,
|
|
MDIO_PATH "/switch%i@%x/ports/port@a",
|
|
id, addr);
|
|
} else if (id == peridot - 1 && !topaz && sfp) {
|
|
res = enable_by_path(blob,
|
|
MDIO_PATH "/switch%i@%x/ports/port-sfp@a",
|
|
id, addr);
|
|
} else {
|
|
res = 0;
|
|
}
|
|
if (res < 0)
|
|
return res;
|
|
|
|
if (id >= peridot + topaz - 1)
|
|
return 0;
|
|
|
|
/* finally change link property if needed */
|
|
node = node_by_path(blob, MDIO_PATH "/switch%i@%x/ports/port@a", id,
|
|
addr);
|
|
if (node < 0)
|
|
return node;
|
|
|
|
for (i = id + 1; i < peridot + topaz; ++i) {
|
|
phandle = phandle_by_path(blob,
|
|
MDIO_PATH "/switch%i@%x/ports/port@%x",
|
|
i, switch_addr(i),
|
|
is_topaz(i) ? 5 : 9);
|
|
if (phandle < 0)
|
|
return phandle;
|
|
|
|
if (i == id + 1)
|
|
res = fdt_setprop_u32(blob, node, "link", phandle);
|
|
else
|
|
res = fdt_appendprop_u32(blob, node, "link", phandle);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int remove_disabled_nodes(void *blob)
|
|
{
|
|
while (1) {
|
|
int res, offset;
|
|
|
|
offset = fdt_node_offset_by_prop_value(blob, -1, "status",
|
|
"disabled", 9);
|
|
if (offset < 0)
|
|
break;
|
|
|
|
res = fdt_del_node(blob, offset);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int node, phandle, res;
|
|
|
|
/*
|
|
* If MOX B (PCI), MOX F (USB) or MOX G (Passthrough PCI) modules are
|
|
* connected, enable the PCIe node.
|
|
*/
|
|
if (pci || usb || passpci) {
|
|
node = fdt_path_offset(blob, PCIE_PATH);
|
|
if (node < 0)
|
|
return node;
|
|
|
|
res = fdt_setprop_string(blob, node, "status", "okay");
|
|
if (res < 0)
|
|
return res;
|
|
|
|
/* Fix PCIe regions for devices with 4 GB RAM */
|
|
res = a3700_fdt_fix_pcie_regions(blob);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* If MOX C (Topaz switch) and/or MOX E (Peridot switch) are connected,
|
|
* enable the eth1 node and setup the switches.
|
|
*/
|
|
if (peridot || topaz) {
|
|
int i;
|
|
|
|
res = enable_by_path(blob, ETH1_PATH);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
for (i = 0; i < peridot + topaz; ++i) {
|
|
res = setup_switch(blob, i);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If MOX D (SFP cage module) is connected, enable the SFP node and eth1
|
|
* node. If there is no Peridot switch between MOX A and MOX D, add link
|
|
* to the SFP node to eth1 node.
|
|
* Also enable and configure SFP GPIO controller node.
|
|
*/
|
|
if (sfp) {
|
|
res = enable_by_path(blob, SFP_PATH);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
res = enable_by_path(blob, ETH1_PATH);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
if (!peridot) {
|
|
phandle = phandle_by_path(blob, SFP_PATH);
|
|
if (phandle < 0)
|
|
return res;
|
|
|
|
node = node_by_path(blob, ETH1_PATH);
|
|
if (node < 0)
|
|
return node;
|
|
|
|
res = fdt_setprop_u32(blob, node, "sfp", phandle);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
res = fdt_setprop_string(blob, node, "phy-mode",
|
|
"sgmii");
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
|
|
res = enable_by_path(blob, SFP_GPIO_PATH);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
if (sfp_pos) {
|
|
char newname[16];
|
|
|
|
/* moxtet-sfp is on non-zero position, change default */
|
|
node = node_by_path(blob, SFP_GPIO_PATH);
|
|
if (node < 0)
|
|
return node;
|
|
|
|
res = fdt_setprop_u32(blob, node, "reg", sfp_pos);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
sprintf(newname, "gpio@%x", sfp_pos);
|
|
|
|
res = fdt_set_name(blob, node, newname);
|
|
if (res < 0)
|
|
return res;
|
|
}
|
|
}
|
|
|
|
fdt_fixup_ethernet(blob);
|
|
|
|
/* Finally remove disabled nodes, as per Rob Herring's request. */
|
|
remove_disabled_nodes(blob);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|