mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
316 lines
5.7 KiB
C
316 lines
5.7 KiB
C
/*
|
|
* TI DaVinci (TMS320DM644x) I2C driver.
|
|
*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* --------------------------------------------------------
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/i2c_defs.h>
|
|
|
|
#define CHECK_NACK() \
|
|
do {\
|
|
if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
|
|
REG(I2C_CON) = 0;\
|
|
return(1);\
|
|
}\
|
|
} while (0)
|
|
|
|
|
|
static int wait_for_bus(void)
|
|
{
|
|
int stat, timeout;
|
|
|
|
REG(I2C_STAT) = 0xffff;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {
|
|
REG(I2C_STAT) = 0xffff;
|
|
return(0);
|
|
}
|
|
|
|
REG(I2C_STAT) = stat;
|
|
udelay(50000);
|
|
}
|
|
|
|
REG(I2C_STAT) = 0xffff;
|
|
return(1);
|
|
}
|
|
|
|
|
|
static int poll_i2c_irq(int mask)
|
|
{
|
|
int stat, timeout;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
udelay(1000);
|
|
stat = REG(I2C_STAT);
|
|
if (stat & mask) {
|
|
return(stat);
|
|
}
|
|
}
|
|
|
|
REG(I2C_STAT) = 0xffff;
|
|
return(stat | I2C_TIMEOUT);
|
|
}
|
|
|
|
|
|
void flush_rx(void)
|
|
{
|
|
while (1) {
|
|
if (!(REG(I2C_STAT) & I2C_STAT_RRDY))
|
|
break;
|
|
|
|
REG(I2C_DRR);
|
|
REG(I2C_STAT) = I2C_STAT_RRDY;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
|
|
void i2c_init(int speed, int slaveadd)
|
|
{
|
|
u_int32_t div, psc;
|
|
|
|
if (REG(I2C_CON) & I2C_CON_EN) {
|
|
REG(I2C_CON) = 0;
|
|
udelay (50000);
|
|
}
|
|
|
|
psc = 2;
|
|
div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */
|
|
REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */
|
|
REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */
|
|
REG(I2C_SCLH) = div - REG(I2C_SCLL);
|
|
|
|
REG(I2C_OA) = slaveadd;
|
|
REG(I2C_CNT) = 0;
|
|
|
|
/* Interrupts must be enabled or I2C module won't work */
|
|
REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
|
|
I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
|
|
|
|
/* Now enable I2C controller (get it out of reset) */
|
|
REG(I2C_CON) = I2C_CON_EN;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
int i2c_set_bus_speed(unsigned int speed)
|
|
{
|
|
i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
|
|
return 0;
|
|
}
|
|
|
|
int i2c_probe(u_int8_t chip)
|
|
{
|
|
int rc = 1;
|
|
|
|
if (chip == REG(I2C_OA)) {
|
|
return(rc);
|
|
}
|
|
|
|
REG(I2C_CON) = 0;
|
|
if (wait_for_bus()) {return(1);}
|
|
|
|
/* try to read one byte from current (or only) address */
|
|
REG(I2C_CNT) = 1;
|
|
REG(I2C_SA) = chip;
|
|
REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);
|
|
udelay (50000);
|
|
|
|
if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {
|
|
rc = 0;
|
|
flush_rx();
|
|
REG(I2C_STAT) = 0xffff;
|
|
} else {
|
|
REG(I2C_STAT) = 0xffff;
|
|
REG(I2C_CON) |= I2C_CON_STP;
|
|
udelay(20000);
|
|
if (wait_for_bus()) {return(1);}
|
|
}
|
|
|
|
flush_rx();
|
|
REG(I2C_STAT) = 0xffff;
|
|
REG(I2C_CNT) = 0;
|
|
return(rc);
|
|
}
|
|
|
|
|
|
int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
|
|
{
|
|
u_int32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
|
|
return(1);
|
|
}
|
|
|
|
if (wait_for_bus()) {return(1);}
|
|
|
|
if (alen != 0) {
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
|
|
REG(I2C_CNT) = alen;
|
|
REG(I2C_SA) = chip;
|
|
REG(I2C_CON) = tmp;
|
|
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(I2C_DXR) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(I2C_DXR) = addr & 0xff;
|
|
} else {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_ARDY)) {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Address phase is over, now read 'len' bytes and stop */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
|
|
REG(I2C_CNT) = len & 0xffff;
|
|
REG(I2C_SA) = chip;
|
|
REG(I2C_CON) = tmp;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_RRDY) {
|
|
buf[i] = REG(I2C_DRR);
|
|
} else {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
|
|
flush_rx();
|
|
REG(I2C_STAT) = 0xffff;
|
|
REG(I2C_CNT) = 0;
|
|
REG(I2C_CON) = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
|
|
{
|
|
u_int32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
|
|
return(1);
|
|
}
|
|
if (len < 0) {
|
|
printf("%s(): bogus length %x\n", __FUNCTION__, len);
|
|
return(1);
|
|
}
|
|
|
|
if (wait_for_bus()) {return(1);}
|
|
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;
|
|
REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;
|
|
REG(I2C_SA) = chip;
|
|
REG(I2C_CON) = tmp;
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(I2C_DXR) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(I2C_DXR) = addr & 0xff;
|
|
} else {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(I2C_DXR) = buf[i];
|
|
} else {
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(I2C_CON) = 0;
|
|
return(1);
|
|
}
|
|
|
|
flush_rx();
|
|
REG(I2C_STAT) = 0xffff;
|
|
REG(I2C_CNT) = 0;
|
|
REG(I2C_CON) = 0;
|
|
|
|
return(0);
|
|
}
|