mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 18:53:06 +00:00
f5a2d6b4b0
Currently driver supports only version 1 and 2. Version 5 has slightly different registers structure Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
253 lines
6.2 KiB
C
253 lines
6.2 KiB
C
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Qualcomm SPMI bus driver
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*
|
|
* Loosely based on Little Kernel driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <dm/device_compat.h>
|
|
#include <spmi/spmi.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* PMIC Arbiter configuration registers */
|
|
#define PMIC_ARB_VERSION 0x0000
|
|
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
|
|
#define PMIC_ARB_VERSION_V3_MIN 0x30000000
|
|
#define PMIC_ARB_VERSION_V5_MIN 0x50000000
|
|
|
|
#define APID_MAP_OFFSET_V1_V2_V3 (0x800)
|
|
#define APID_MAP_OFFSET_V5 (0x900)
|
|
#define ARB_CHANNEL_OFFSET(n) (0x4 * (n))
|
|
#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
|
|
#define SPMI_V5_OBS_CH_OFFSET(chnl) ((chnl) * 0x80)
|
|
#define SPMI_V5_RW_CH_OFFSET(chnl) ((chnl) * 0x10000)
|
|
|
|
#define SPMI_REG_CMD0 0x0
|
|
#define SPMI_REG_CONFIG 0x4
|
|
#define SPMI_REG_STATUS 0x8
|
|
#define SPMI_REG_WDATA 0x10
|
|
#define SPMI_REG_RDATA 0x18
|
|
|
|
#define SPMI_CMD_OPCODE_SHIFT 27
|
|
#define SPMI_CMD_SLAVE_ID_SHIFT 20
|
|
#define SPMI_CMD_ADDR_SHIFT 12
|
|
#define SPMI_CMD_ADDR_OFFSET_SHIFT 4
|
|
#define SPMI_CMD_BYTE_CNT_SHIFT 0
|
|
|
|
#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00
|
|
#define SPMI_CMD_EXT_REG_READ_LONG 0x01
|
|
|
|
#define SPMI_STATUS_DONE 0x1
|
|
|
|
#define SPMI_MAX_CHANNELS 128
|
|
#define SPMI_MAX_SLAVES 16
|
|
#define SPMI_MAX_PERIPH 256
|
|
|
|
enum arb_ver {
|
|
V1 = 1,
|
|
V2,
|
|
V3,
|
|
V5 = 5
|
|
};
|
|
|
|
/*
|
|
* PMIC arbiter version 5 uses different register offsets for read/write vs
|
|
* observer channels.
|
|
*/
|
|
enum pmic_arb_channel {
|
|
PMIC_ARB_CHANNEL_RW,
|
|
PMIC_ARB_CHANNEL_OBS,
|
|
};
|
|
|
|
struct msm_spmi_priv {
|
|
phys_addr_t arb_chnl; /* ARB channel mapping base */
|
|
phys_addr_t spmi_core; /* SPMI core */
|
|
phys_addr_t spmi_obs; /* SPMI observer */
|
|
/* SPMI channel map */
|
|
uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH];
|
|
/* SPMI bus arbiter version */
|
|
u32 arb_ver;
|
|
};
|
|
|
|
static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
|
|
uint8_t val)
|
|
{
|
|
struct msm_spmi_priv *priv = dev_get_priv(dev);
|
|
unsigned channel;
|
|
unsigned int ch_offset;
|
|
uint32_t reg = 0;
|
|
|
|
if (usid >= SPMI_MAX_SLAVES)
|
|
return -EIO;
|
|
if (pid >= SPMI_MAX_PERIPH)
|
|
return -EIO;
|
|
|
|
channel = priv->channel_map[usid][pid];
|
|
|
|
/* Disable IRQ mode for the current channel*/
|
|
writel(0x0,
|
|
priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);
|
|
|
|
/* Write single byte */
|
|
writel(val, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA);
|
|
|
|
/* Prepare write command */
|
|
reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT;
|
|
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
|
|
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
|
|
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
|
|
reg |= 1; /* byte count */
|
|
|
|
if (priv->arb_ver == V5)
|
|
ch_offset = SPMI_V5_RW_CH_OFFSET(channel);
|
|
else
|
|
ch_offset = SPMI_CH_OFFSET(channel);
|
|
|
|
/* Send write command */
|
|
writel(reg, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
|
|
|
|
/* Wait till CMD DONE status */
|
|
reg = 0;
|
|
while (!reg) {
|
|
reg = readl(priv->spmi_core + SPMI_CH_OFFSET(channel) +
|
|
SPMI_REG_STATUS);
|
|
}
|
|
|
|
if (reg ^ SPMI_STATUS_DONE) {
|
|
printf("SPMI write failure.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
|
|
{
|
|
struct msm_spmi_priv *priv = dev_get_priv(dev);
|
|
unsigned channel;
|
|
unsigned int ch_offset;
|
|
uint32_t reg = 0;
|
|
|
|
if (usid >= SPMI_MAX_SLAVES)
|
|
return -EIO;
|
|
if (pid >= SPMI_MAX_PERIPH)
|
|
return -EIO;
|
|
|
|
channel = priv->channel_map[usid][pid];
|
|
|
|
if (priv->arb_ver == V5)
|
|
ch_offset = SPMI_V5_OBS_CH_OFFSET(channel);
|
|
else
|
|
ch_offset = SPMI_CH_OFFSET(channel);
|
|
|
|
/* Disable IRQ mode for the current channel*/
|
|
writel(0x0, priv->spmi_obs + ch_offset + SPMI_REG_CONFIG);
|
|
|
|
/* Prepare read command */
|
|
reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;
|
|
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
|
|
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
|
|
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
|
|
reg |= 1; /* byte count */
|
|
|
|
/* Request read */
|
|
writel(reg, priv->spmi_obs + ch_offset + SPMI_REG_CMD0);
|
|
|
|
/* Wait till CMD DONE status */
|
|
reg = 0;
|
|
while (!reg) {
|
|
reg = readl(priv->spmi_obs + ch_offset + SPMI_REG_STATUS);
|
|
}
|
|
|
|
if (reg ^ SPMI_STATUS_DONE) {
|
|
printf("SPMI read failure.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Read the data */
|
|
return readl(priv->spmi_obs + ch_offset +
|
|
SPMI_REG_RDATA) & 0xFF;
|
|
}
|
|
|
|
static struct dm_spmi_ops msm_spmi_ops = {
|
|
.read = msm_spmi_read,
|
|
.write = msm_spmi_write,
|
|
};
|
|
|
|
static int msm_spmi_probe(struct udevice *dev)
|
|
{
|
|
struct msm_spmi_priv *priv = dev_get_priv(dev);
|
|
phys_addr_t config_addr;
|
|
u32 hw_ver;
|
|
u32 version;
|
|
int i;
|
|
int err;
|
|
|
|
config_addr = dev_read_addr_index(dev, 0);
|
|
priv->spmi_core = dev_read_addr_index(dev, 1);
|
|
priv->spmi_obs = dev_read_addr_index(dev, 2);
|
|
|
|
hw_ver = readl(config_addr + PMIC_ARB_VERSION);
|
|
|
|
if (hw_ver < PMIC_ARB_VERSION_V3_MIN) {
|
|
priv->arb_ver = V2;
|
|
version = 2;
|
|
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V1_V2_V3;
|
|
} else if (hw_ver < PMIC_ARB_VERSION_V5_MIN) {
|
|
priv->arb_ver = V3;
|
|
version = 3;
|
|
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V1_V2_V3;
|
|
} else {
|
|
priv->arb_ver = V5;
|
|
version = 5;
|
|
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V5;
|
|
|
|
if (err) {
|
|
dev_err(dev, "could not read APID->PPID mapping table, rc= %d\n", err);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
dev_dbg(dev, "PMIC Arb Version-%d (0x%x)\n", version, hw_ver);
|
|
|
|
if (priv->arb_chnl == FDT_ADDR_T_NONE ||
|
|
priv->spmi_core == FDT_ADDR_T_NONE ||
|
|
priv->spmi_obs == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dev, "priv->arb_chnl address (%llu)\n", priv->arb_chnl);
|
|
dev_dbg(dev, "priv->spmi_core address (%llu)\n", priv->spmi_core);
|
|
dev_dbg(dev, "priv->spmi_obs address (%llu)\n", priv->spmi_obs);
|
|
/* Scan peripherals connected to each SPMI channel */
|
|
for (i = 0; i < SPMI_MAX_PERIPH; i++) {
|
|
uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i));
|
|
uint8_t slave_id = (periph & 0xf0000) >> 16;
|
|
uint8_t pid = (periph & 0xff00) >> 8;
|
|
|
|
priv->channel_map[slave_id][pid] = i;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id msm_spmi_ids[] = {
|
|
{ .compatible = "qcom,spmi-pmic-arb" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(msm_spmi) = {
|
|
.name = "msm_spmi",
|
|
.id = UCLASS_SPMI,
|
|
.of_match = msm_spmi_ids,
|
|
.ops = &msm_spmi_ops,
|
|
.probe = msm_spmi_probe,
|
|
.priv_auto = sizeof(struct msm_spmi_priv),
|
|
};
|