mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
9539738509
Now that we have a 'positive' Kconfig option, use this instead of the negative one, which is harder to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
370 lines
8.8 KiB
C
370 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static struct rockchip_mux_route_data px30_mux_route_data[] = {
|
|
{
|
|
/* cif-d2m0 */
|
|
.bank_num = 2,
|
|
.pin = 0,
|
|
.func = 1,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 7),
|
|
}, {
|
|
/* cif-d2m1 */
|
|
.bank_num = 3,
|
|
.pin = 3,
|
|
.func = 3,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 7) | BIT(7),
|
|
}, {
|
|
/* pdm-m0 */
|
|
.bank_num = 3,
|
|
.pin = 22,
|
|
.func = 2,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 8),
|
|
}, {
|
|
/* pdm-m1 */
|
|
.bank_num = 2,
|
|
.pin = 22,
|
|
.func = 1,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 8) | BIT(8),
|
|
}, {
|
|
/* uart2-rxm0 */
|
|
.bank_num = 1,
|
|
.pin = 27,
|
|
.func = 2,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 10),
|
|
}, {
|
|
/* uart2-rxm1 */
|
|
.bank_num = 2,
|
|
.pin = 14,
|
|
.func = 2,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 10) | BIT(10),
|
|
}, {
|
|
/* uart3-rxm0 */
|
|
.bank_num = 0,
|
|
.pin = 17,
|
|
.func = 2,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 9),
|
|
}, {
|
|
/* uart3-rxm1 */
|
|
.bank_num = 1,
|
|
.pin = 15,
|
|
.func = 2,
|
|
.route_offset = 0x184,
|
|
.route_val = BIT(16 + 9) | BIT(9),
|
|
},
|
|
};
|
|
|
|
static int px30_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data, route_reg, route_val;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
if (bank->route_mask & BIT(pin)) {
|
|
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
|
|
&route_val)) {
|
|
ret = regmap_write(regmap, route_reg, route_val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define PX30_PULL_PMU_OFFSET 0x10
|
|
#define PX30_PULL_GRF_OFFSET 0x60
|
|
#define PX30_PULL_BITS_PER_PIN 2
|
|
#define PX30_PULL_PINS_PER_REG 8
|
|
#define PX30_PULL_BANK_STRIDE 16
|
|
|
|
static void px30_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = PX30_PULL_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = PX30_PULL_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * PX30_PULL_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4);
|
|
*bit = (pin_num % PX30_PULL_PINS_PER_REG);
|
|
*bit *= PX30_PULL_BITS_PER_PIN;
|
|
}
|
|
|
|
static int px30_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit, type;
|
|
u32 data;
|
|
|
|
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
|
|
return -ENOTSUPP;
|
|
|
|
px30_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
type = bank->pull_type[pin_num / 8];
|
|
ret = rockchip_translate_pull_value(type, pull);
|
|
if (ret < 0) {
|
|
debug("unsupported pull setting %d\n", pull);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define PX30_DRV_PMU_OFFSET 0x20
|
|
#define PX30_DRV_GRF_OFFSET 0xf0
|
|
#define PX30_DRV_BITS_PER_PIN 2
|
|
#define PX30_DRV_PINS_PER_REG 8
|
|
#define PX30_DRV_BANK_STRIDE 16
|
|
|
|
static void px30_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = PX30_DRV_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = PX30_DRV_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * PX30_DRV_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4);
|
|
*bit = (pin_num % PX30_DRV_PINS_PER_REG);
|
|
*bit *= PX30_DRV_BITS_PER_PIN;
|
|
}
|
|
|
|
static int px30_set_drive(struct rockchip_pin_bank *bank,
|
|
int pin_num, int strength)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u32 data, rmask_bits, temp;
|
|
u8 bit;
|
|
int drv_type = bank->drv[pin_num / 8].drv_type;
|
|
|
|
px30_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
ret = rockchip_translate_drive_value(drv_type, strength);
|
|
if (ret < 0) {
|
|
debug("unsupported driver strength %d\n", strength);
|
|
return ret;
|
|
}
|
|
|
|
switch (drv_type) {
|
|
case DRV_TYPE_IO_1V8_3V0_AUTO:
|
|
case DRV_TYPE_IO_3V3_ONLY:
|
|
rmask_bits = ROCKCHIP_DRV_3BITS_PER_PIN;
|
|
switch (bit) {
|
|
case 0 ... 12:
|
|
/* regular case, nothing to do */
|
|
break;
|
|
case 15:
|
|
/*
|
|
* drive-strength offset is special, as it is spread
|
|
* over 2 registers, the bit data[15] contains bit 0
|
|
* of the value while temp[1:0] contains bits 2 and 1
|
|
*/
|
|
data = (ret & 0x1) << 15;
|
|
temp = (ret >> 0x1) & 0x3;
|
|
|
|
data |= BIT(31);
|
|
ret = regmap_write(regmap, reg, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
temp |= (0x3 << 16);
|
|
reg += 0x4;
|
|
ret = regmap_write(regmap, reg, temp);
|
|
|
|
return ret;
|
|
case 18 ... 21:
|
|
/* setting fully enclosed in the second register */
|
|
reg += 4;
|
|
bit -= 16;
|
|
break;
|
|
default:
|
|
debug("unsupported bit: %d for pinctrl drive type: %d\n",
|
|
bit, drv_type);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case DRV_TYPE_IO_DEFAULT:
|
|
case DRV_TYPE_IO_1V8_OR_3V0:
|
|
case DRV_TYPE_IO_1V8_ONLY:
|
|
rmask_bits = ROCKCHIP_DRV_BITS_PER_PIN;
|
|
break;
|
|
default:
|
|
debug("unsupported pinctrl drive type: %d\n",
|
|
drv_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << rmask_bits) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define PX30_SCHMITT_PMU_OFFSET 0x38
|
|
#define PX30_SCHMITT_GRF_OFFSET 0xc0
|
|
#define PX30_SCHMITT_PINS_PER_PMU_REG 16
|
|
#define PX30_SCHMITT_BANK_STRIDE 16
|
|
#define PX30_SCHMITT_PINS_PER_GRF_REG 8
|
|
|
|
static int px30_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num,
|
|
struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int pins_per_reg;
|
|
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = PX30_SCHMITT_PMU_OFFSET;
|
|
pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = PX30_SCHMITT_GRF_OFFSET;
|
|
pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG;
|
|
*reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE;
|
|
}
|
|
*reg += ((pin_num / pins_per_reg) * 4);
|
|
*bit = pin_num % pins_per_reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int px30_set_schmitt(struct rockchip_pin_bank *bank,
|
|
int pin_num, int enable)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
px30_calc_schmitt_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
/* enable the write to the equivalent lower bits */
|
|
data = BIT(bit + 16) | (enable << bit);
|
|
|
|
return regmap_write(regmap, reg, data);
|
|
}
|
|
|
|
static struct rockchip_pin_bank px30_pin_banks[] = {
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT
|
|
),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl px30_pin_ctrl = {
|
|
.pin_banks = px30_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(px30_pin_banks),
|
|
.grf_mux_offset = 0x0,
|
|
.pmu_mux_offset = 0x0,
|
|
.grf_drv_offset = 0xf0,
|
|
.pmu_drv_offset = 0x20,
|
|
.iomux_routes = px30_mux_route_data,
|
|
.niomux_routes = ARRAY_SIZE(px30_mux_route_data),
|
|
.set_mux = px30_set_mux,
|
|
.set_pull = px30_set_pull,
|
|
.set_drive = px30_set_drive,
|
|
.set_schmitt = px30_set_schmitt,
|
|
};
|
|
|
|
static const struct udevice_id px30_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,px30-pinctrl",
|
|
.data = (ulong)&px30_pin_ctrl
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_px30) = {
|
|
.name = "rockchip_px30_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = px30_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|