u-boot/drivers/usb/dwc3/Kconfig
Neil Armstrong adb049abf7 usb: dwc3: Add Meson G12A USB Glue
Adds support for Amlogic G12A USB Control Glue HW.

The Amlogic G12A SoC Family embeds 2 USB Controllers :
- a DWC3 IP configured as Host for USB2 and USB3
- a DWC2 IP configured as Peripheral USB2 Only

A glue connects these both controllers to 2 USB2 PHYs, and optionnally
to an USB3+PCIE Combo PHY shared with the PCIE controller.

The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including
routing of the OTG PHY between the DWC3 and DWC2 controllers, and
setups the on-chip OTG mode selection for this PHY.

This driver sets the OTG capable port as Host mode by default,
the switch to Device mode is to be done in a separate patch.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-05-09 10:38:32 +02:00

79 lines
2.1 KiB
Text

config USB_DWC3
bool "DesignWare USB3 DRD Core Support"
depends on USB_HOST || USB_GADGET
help
Say Y here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
if USB_DWC3
choice
bool "DWC3 Mode Selection"
config USB_DWC3_HOST
bool "Host only mode"
depends on USB
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
depends on USB_GADGET
select USB_GADGET_DUALSPEED
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
endchoice
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
bool "Texas Instruments OMAP5 and similar Platforms"
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' here if you have one such device
config USB_DWC3_GENERIC
bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)"
depends on DM_USB && USB_DWC3 && MISC
help
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_MESON_G12A
bool "Amlogic Meson G12A USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
imply PHY
help
Select this for Amlogic Meson G12A Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_UNIPHIER
bool "DesignWare USB3 Host Support on UniPhier Platforms"
depends on ARCH_UNIPHIER && USB_XHCI_DWC3
help
Support of USB2/3 functionality in Socionext UniPhier platforms.
Say 'Y' here if you have one such device.
menu "PHY Subsystem"
config USB_DWC3_PHY_OMAP
bool "TI OMAP SoC series USB DRD PHY driver"
help
Enable single driver for both USB2 PHY programming and USB3 PHY
programming for TI SoCs.
config USB_DWC3_PHY_SAMSUNG
bool "Exynos5 SoC series USB DRD PHY driver"
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
endmenu
endif