mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 19:28:36 +00:00
39ff7d5f4c
This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: Stefan Roese <sr@denx.de>
424 lines
12 KiB
C
424 lines
12 KiB
C
/*
|
|
* (C) Copyright 2006-2009
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2006
|
|
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
|
|
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <ppc4xx.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bitops.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !defined(CONFIG_SYS_NO_FLASH)
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
#endif
|
|
|
|
extern void __ft_board_setup(void *blob, bd_t *bd);
|
|
ulong flash_get_size(ulong base, int banknum);
|
|
|
|
static inline u32 get_async_pci_freq(void)
|
|
{
|
|
if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) &
|
|
CONFIG_SYS_BCSR5_PCI66EN)
|
|
return 66666666;
|
|
else
|
|
return 33333333;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 sdr0_cust0;
|
|
u32 sdr0_pfc1, sdr0_pfc2;
|
|
u32 reg;
|
|
|
|
mtdcr(EBC0_CFGADDR, EBC0_CFG);
|
|
mtdcr(EBC0_CFGDATA, 0xb8400000);
|
|
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
|
|
mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
|
|
mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
/* Check and reconfigure the PCI sync clock if necessary */
|
|
ppc4xx_pci_sync_clock_config(get_async_pci_freq());
|
|
|
|
/* 50MHz tmrclk */
|
|
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
|
|
|
|
/* clear write protects */
|
|
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x07, 0x00);
|
|
|
|
/* enable Ethernet */
|
|
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x08, 0x00);
|
|
|
|
/* enable USB device */
|
|
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x09, 0x20);
|
|
|
|
/* select Ethernet (and optionally IIC1) pins */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
|
SDR0_PFC1_SELECT_CONFIG_4;
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
|
|
#endif
|
|
/* Two UARTs, so we need 4-pin mode. Also, we want CTS/RTS mode. */
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS;
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS;
|
|
|
|
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
|
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
|
SDR0_PFC2_SELECT_CONFIG_4;
|
|
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
/* PCI arbiter enabled */
|
|
mfsdr(SDR0_PCI0, reg);
|
|
mtsdr(SDR0_PCI0, 0x80000000 | reg);
|
|
|
|
/* setup NAND FLASH */
|
|
mfsdr(SDR0_CUST0, sdr0_cust0);
|
|
sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
|
|
SDR0_CUST0_NDFC_ENABLE |
|
|
SDR0_CUST0_NDFC_BW_8_BIT |
|
|
SDR0_CUST0_NDFC_ARE_MASK |
|
|
(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
|
|
mtsdr(SDR0_CUST0, sdr0_cust0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#if !defined(CONFIG_SYS_NO_FLASH)
|
|
uint pbcr;
|
|
int size_val = 0;
|
|
#endif
|
|
#ifdef CONFIG_440EPX
|
|
unsigned long usb2d0cr = 0;
|
|
unsigned long usb2phy0cr, usb2h0cr = 0;
|
|
unsigned long sdr0_pfc1;
|
|
char *act = getenv("usbact");
|
|
#endif
|
|
u32 reg;
|
|
|
|
#if !defined(CONFIG_SYS_NO_FLASH)
|
|
/* Re-do flash sizing to get full correct info */
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
mtdcr(EBC0_CFGADDR, PB3CR);
|
|
#else
|
|
mtdcr(EBC0_CFGADDR, PB0CR);
|
|
#endif
|
|
pbcr = mfdcr(EBC0_CFGDATA);
|
|
size_val = ffs(gd->bd->bi_flashsize) - 21;
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
mtdcr(EBC0_CFGADDR, PB3CR);
|
|
#else
|
|
mtdcr(EBC0_CFGADDR, PB0CR);
|
|
#endif
|
|
mtdcr(EBC0_CFGDATA, pbcr);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size(gd->bd->bi_flashstart, 0);
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* Monitor protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
-CONFIG_SYS_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[0]);
|
|
|
|
/* Env protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[0]);
|
|
#endif
|
|
#endif /* CONFIG_SYS_NO_FLASH */
|
|
|
|
/*
|
|
* USB suff...
|
|
*/
|
|
#ifdef CONFIG_440EPX
|
|
if (act == NULL || strcmp(act, "hostdev") == 0) {
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mfsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
|
|
|
/*
|
|
* An 8-bit/60MHz interface is the only possible alternative
|
|
* when connecting the Device to the PHY
|
|
*/
|
|
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
|
|
|
|
/*
|
|
* To enable the USB 2.0 Device function
|
|
* through the UTMI interface
|
|
*/
|
|
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
|
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
|
|
|
|
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
|
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
|
|
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
/*clear resets*/
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Host(int phy) Device(ext phy)\n");
|
|
|
|
} else if (strcmp(act, "dev") == 0) {
|
|
/*-------------------PATCH-------------------------------*/
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x672c6000);
|
|
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST0, 0x00000080);
|
|
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x60206000);
|
|
|
|
*(unsigned int *)(0xe0000350) = 0x00000001;
|
|
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x60306000);
|
|
/*-------------------PATCH-------------------------------*/
|
|
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
mfsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
|
|
|
|
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
|
|
|
|
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
|
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
|
|
|
|
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
|
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
|
|
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
/* clear resets */
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
udelay (1000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Device(int phy)\n");
|
|
}
|
|
#endif /* CONFIG_440EPX */
|
|
|
|
mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
|
|
reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
|
|
mtsdr(SDR0_SRST1, reg);
|
|
|
|
/*
|
|
* Clear PLB4A0_ACR[WRP]
|
|
* This fix will make the MAL burst disabling patch for the Linux
|
|
* EMAC driver obsolete.
|
|
*/
|
|
reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
|
|
mtdcr(PLB4_ACR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
u8 rev;
|
|
u32 clock = get_async_pci_freq();
|
|
|
|
#ifdef CONFIG_440EPX
|
|
printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
|
|
#else
|
|
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
|
|
#endif
|
|
|
|
rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
|
|
printf(", Rev. %X, PCI-Async=%d MHz", rev, clock / 1000000);
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
/*
|
|
* Reconfiguration of the PCI sync clock is already done,
|
|
* now check again if everything is in range:
|
|
*/
|
|
if (ppc4xx_pci_sync_clock_config(clock)) {
|
|
printf("ERROR: PCI clocking incorrect (async=%d "
|
|
"sync=%ld)!\n", clock, get_PCI_freq());
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
|
|
/*
|
|
* Assign interrupts to PCI devices.
|
|
*/
|
|
void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT)
|
|
/*
|
|
* On NAND-booting sequoia, we need to patch the chips select numbers
|
|
* in the dtb (CS0 - NAND, CS3 - NOR)
|
|
*/
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int rc;
|
|
int len;
|
|
int nodeoffset;
|
|
struct fdt_property *prop;
|
|
u32 *reg;
|
|
char path[32];
|
|
|
|
/* First do common fdt setup */
|
|
__ft_board_setup(blob, bd);
|
|
|
|
/* And now configure NOR chip select to 3 instead of 0 */
|
|
strcpy(path, "/plb/opb/ebc/nor_flash@0,0");
|
|
nodeoffset = fdt_path_offset(blob, path);
|
|
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
|
|
if (prop == NULL) {
|
|
printf("Unable to update NOR chip select for NAND booting\n");
|
|
return;
|
|
}
|
|
reg = (u32 *)&prop->data[0];
|
|
reg[0] = 3;
|
|
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
|
|
if (rc) {
|
|
printf("Unable to update property NOR mappings, err=%s\n",
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
|
|
/* And now configure NAND chip select to 0 instead of 3 */
|
|
strcpy(path, "/plb/opb/ebc/ndfc@3,0");
|
|
nodeoffset = fdt_path_offset(blob, path);
|
|
prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
|
|
if (prop == NULL) {
|
|
printf("Unable to update NDFC chip select for NAND booting\n");
|
|
return;
|
|
}
|
|
reg = (u32 *)&prop->data[0];
|
|
reg[0] = 0;
|
|
rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1);
|
|
if (rc) {
|
|
printf("Unable to update property NDFC mappings, err=%s\n",
|
|
fdt_strerror(rc));
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_NAND_U_BOOT */
|