mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
360 lines
7.9 KiB
C
360 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* Copyright (c) 2013 NVIDIA Corporation
|
|
*/
|
|
|
|
#ifndef _TEGRA_USB_H_
|
|
#define _TEGRA_USB_H_
|
|
|
|
/* USB Controller (USBx_CONTROLLER_) regs */
|
|
struct usb_ctlr {
|
|
/* 0x000 */
|
|
uint id;
|
|
uint reserved0;
|
|
uint host;
|
|
uint device;
|
|
|
|
/* 0x010 */
|
|
uint txbuf;
|
|
uint rxbuf;
|
|
uint reserved1[2];
|
|
|
|
/* 0x020 */
|
|
uint reserved2[56];
|
|
|
|
/* 0x100 */
|
|
u16 cap_length;
|
|
u16 hci_version;
|
|
uint hcs_params;
|
|
uint hcc_params;
|
|
uint reserved3[5];
|
|
|
|
/* 0x120 */
|
|
uint dci_version;
|
|
uint dcc_params;
|
|
uint reserved4[2];
|
|
|
|
#ifdef CONFIG_TEGRA20
|
|
/* 0x130 */
|
|
uint reserved4_2[4];
|
|
|
|
/* 0x140 */
|
|
uint usb_cmd;
|
|
uint usb_sts;
|
|
uint usb_intr;
|
|
uint frindex;
|
|
|
|
/* 0x150 */
|
|
uint reserved5;
|
|
uint periodic_list_base;
|
|
uint async_list_addr;
|
|
uint async_tt_sts;
|
|
|
|
/* 0x160 */
|
|
uint burst_size;
|
|
uint tx_fill_tuning;
|
|
uint reserved6; /* is this port_sc1 on some controllers? */
|
|
uint icusb_ctrl;
|
|
|
|
/* 0x170 */
|
|
uint ulpi_viewport;
|
|
uint reserved7;
|
|
uint endpt_nak;
|
|
uint endpt_nak_enable;
|
|
|
|
/* 0x180 */
|
|
uint reserved;
|
|
uint port_sc1;
|
|
uint reserved8[6];
|
|
|
|
/* 0x1a0 */
|
|
uint reserved9;
|
|
uint otgsc;
|
|
uint usb_mode;
|
|
uint endpt_setup_stat;
|
|
|
|
/* 0x1b0 */
|
|
uint reserved10[20];
|
|
|
|
/* 0x200 */
|
|
uint reserved11[0x80];
|
|
#else
|
|
/* 0x130 */
|
|
uint usb_cmd;
|
|
uint usb_sts;
|
|
uint usb_intr;
|
|
uint frindex;
|
|
|
|
/* 0x140 */
|
|
uint reserved5;
|
|
uint periodic_list_base;
|
|
uint async_list_addr;
|
|
uint reserved5_1;
|
|
|
|
/* 0x150 */
|
|
uint burst_size;
|
|
uint tx_fill_tuning;
|
|
uint reserved6;
|
|
uint icusb_ctrl;
|
|
|
|
/* 0x160 */
|
|
uint ulpi_viewport;
|
|
uint reserved7[3];
|
|
|
|
/* 0x170 */
|
|
uint reserved;
|
|
uint port_sc1;
|
|
uint reserved8[6];
|
|
|
|
/* 0x190 */
|
|
uint reserved9[8];
|
|
|
|
/* 0x1b0 */
|
|
uint reserved10;
|
|
uint hostpc1_devlc;
|
|
uint reserved10_1[2];
|
|
|
|
/* 0x1c0 */
|
|
uint reserved10_2[4];
|
|
|
|
/* 0x1d0 */
|
|
uint reserved10_3[4];
|
|
|
|
/* 0x1e0 */
|
|
uint reserved10_4[4];
|
|
|
|
/* 0x1f0 */
|
|
uint reserved10_5;
|
|
uint otgsc;
|
|
uint usb_mode;
|
|
uint reserved10_6;
|
|
|
|
/* 0x200 */
|
|
uint endpt_nak;
|
|
uint endpt_nak_enable;
|
|
uint endpt_setup_stat;
|
|
uint reserved11_1[0x7D];
|
|
#endif
|
|
|
|
/* 0x400 */
|
|
uint susp_ctrl;
|
|
uint phy_vbus_sensors;
|
|
uint phy_vbus_wakeup_id;
|
|
uint phy_alt_vbus_sys;
|
|
|
|
#ifdef CONFIG_TEGRA20
|
|
/* 0x410 */
|
|
uint usb1_legacy_ctrl;
|
|
uint reserved12[4];
|
|
|
|
/* 0x424 */
|
|
uint ulpi_timing_ctrl_0;
|
|
uint ulpi_timing_ctrl_1;
|
|
uint reserved13[53];
|
|
#else
|
|
|
|
/* 0x410 */
|
|
uint usb1_legacy_ctrl;
|
|
uint reserved12[3];
|
|
|
|
/* 0x420 */
|
|
uint reserved13[56];
|
|
#endif
|
|
|
|
/* 0x500 */
|
|
uint reserved14[64 * 3];
|
|
|
|
/* 0x800 */
|
|
uint utmip_pll_cfg0;
|
|
uint utmip_pll_cfg1;
|
|
uint utmip_xcvr_cfg0;
|
|
uint utmip_bias_cfg0;
|
|
|
|
/* 0x810 */
|
|
uint utmip_hsrx_cfg0;
|
|
uint utmip_hsrx_cfg1;
|
|
uint utmip_fslsrx_cfg0;
|
|
uint utmip_fslsrx_cfg1;
|
|
|
|
/* 0x820 */
|
|
uint utmip_tx_cfg0;
|
|
uint utmip_misc_cfg0;
|
|
uint utmip_misc_cfg1;
|
|
uint utmip_debounce_cfg0;
|
|
|
|
/* 0x830 */
|
|
uint utmip_bat_chrg_cfg0;
|
|
uint utmip_spare_cfg0;
|
|
uint utmip_xcvr_cfg1;
|
|
uint utmip_bias_cfg1;
|
|
};
|
|
|
|
/* USB1_LEGACY_CTRL */
|
|
#define USB1_NO_LEGACY_MODE 1
|
|
|
|
#define VBUS_SENSE_CTL_SHIFT 1
|
|
#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
|
|
#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
|
|
#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
|
|
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
|
|
#define VBUS_SENSE_CTL_A_SESS_VLD 3
|
|
|
|
/* USBx_IF_USB_SUSP_CTRL_0 */
|
|
#define UTMIP_PHY_ENB (1 << 12)
|
|
#define UTMIP_RESET (1 << 11)
|
|
#define USB_PHY_CLK_VALID (1 << 7)
|
|
#define USB_SUSP_CLR (1 << 5)
|
|
|
|
#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30)
|
|
/* USB2_IF_USB_SUSP_CTRL_0 */
|
|
#define ULPI_PHY_ENB (1 << 13)
|
|
|
|
/* USB2_IF_ULPI_TIMING_CTRL_0 */
|
|
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
|
|
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
|
|
|
|
/* USB2_IF_ULPI_TIMING_CTRL_1 */
|
|
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
|
|
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
|
|
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
|
|
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
|
|
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
|
|
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
|
|
#endif
|
|
|
|
/* USBx_UTMIP_MISC_CFG0 */
|
|
#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
|
|
|
|
/* USBx_UTMIP_MISC_CFG1 */
|
|
#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
|
|
|
|
/*
|
|
* Tegra 3 and later: Moved to Clock and Reset register space, see
|
|
* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
|
|
*/
|
|
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
|
|
#define UTMIP_PLLU_STABLE_COUNT_MASK \
|
|
(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
|
|
/*
|
|
* Tegra 3 and later: Moved to Clock and Reset register space, see
|
|
* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0
|
|
*/
|
|
#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
|
|
#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
|
|
(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
|
|
|
|
/* USBx_UTMIP_PLL_CFG1_0 */
|
|
/* Tegra 3 and later: Moved to Clock and Reset register space */
|
|
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
|
|
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
|
|
(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
|
|
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
|
|
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
|
|
|
|
/* USBx_UTMIP_BIAS_CFG0_0 */
|
|
#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24)
|
|
#define UTMIP_OTGPD (1 << 11)
|
|
#define UTMIP_BIASPD (1 << 10)
|
|
#define UTMIP_HSDISCON_LEVEL_SHIFT 2
|
|
#define UTMIP_HSDISCON_LEVEL_MASK \
|
|
(0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
|
|
#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0
|
|
#define UTMIP_HSSQUELCH_LEVEL_MASK \
|
|
(0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
|
|
|
|
/* USBx_UTMIP_BIAS_CFG1_0 */
|
|
#define UTMIP_FORCE_PDTRK_POWERDOWN 1
|
|
#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT 8
|
|
#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK \
|
|
(0x3f << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT)
|
|
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
|
|
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
|
|
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
|
|
|
|
/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
|
|
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
|
|
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
|
|
|
|
/* USBx_UTMIP_TX_CFG0_0 */
|
|
#define UTMIP_FS_PREAMBLE_J (1 << 19)
|
|
|
|
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
|
|
#define UTMIP_PD_CHRG 1
|
|
|
|
/* USBx_UTMIP_SPARE_CFG0_0 */
|
|
#define FUSE_SETUP_SEL (1 << 3)
|
|
|
|
/* USBx_UTMIP_HSRX_CFG0_0 */
|
|
#define UTMIP_IDLE_WAIT_SHIFT 15
|
|
#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
|
|
#define UTMIP_ELASTIC_LIMIT_SHIFT 10
|
|
#define UTMIP_ELASTIC_LIMIT_MASK \
|
|
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
|
|
|
|
/* USBx_UTMIP_HSRX_CFG1_0 */
|
|
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
|
|
#define UTMIP_HS_SYNC_START_DLY_MASK \
|
|
(0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
|
|
|
|
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
|
|
#define IC_ENB1 (1 << 3)
|
|
|
|
#ifdef CONFIG_TEGRA20
|
|
/* PORTSC1, USB1 */
|
|
#define PTS1_SHIFT 31
|
|
#define PTS1_MASK (1 << PTS1_SHIFT)
|
|
#define STS1 (1 << 30)
|
|
|
|
/* PORTSC, USB2, USB3 */
|
|
#define PTS_SHIFT 30
|
|
#define PTS_MASK (3U << PTS_SHIFT)
|
|
#define STS (1 << 29)
|
|
#else
|
|
/* USB2D_HOSTPC1_DEVLC_0 */
|
|
#define PTS_SHIFT 29
|
|
#define PTS_MASK (0x7U << PTS_SHIFT)
|
|
#define STS (1 << 28)
|
|
#endif
|
|
|
|
#define PTS_UTMI 0
|
|
#define PTS_RESERVED 1
|
|
#define PTS_ULPI 2
|
|
#define PTS_ICUSB_SER 3
|
|
#define PTS_HSIC 4
|
|
|
|
/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
|
|
#define WKOC (1 << 22)
|
|
#define WKDS (1 << 21)
|
|
#define WKCN (1 << 20)
|
|
|
|
/* USBx_UTMIP_XCVR_CFG0_0 */
|
|
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
|
|
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
|
|
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
|
|
#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
|
|
#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25
|
|
#define UTMIP_XCVR_HSSLEW_MSB_MASK \
|
|
(0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
|
|
#define UTMIP_XCVR_SETUP_MSB_SHIFT 22
|
|
#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
|
|
#define UTMIP_XCVR_SETUP_SHIFT 0
|
|
#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT)
|
|
|
|
/* USBx_UTMIP_XCVR_CFG1_0 */
|
|
#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18
|
|
#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \
|
|
(0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
|
|
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
|
|
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
|
|
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
|
|
|
|
/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
|
|
#define VBUS_VLD_STS (1 << 26)
|
|
#define VBUS_B_SESS_VLD_SW_VALUE (1 << 12)
|
|
#define VBUS_B_SESS_VLD_SW_EN (1 << 11)
|
|
|
|
/* Setup USB on the board */
|
|
int usb_process_devicetree(const void *blob);
|
|
|
|
#endif /* _TEGRA_USB_H_ */
|