mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
84ad688473
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2641 lines
74 KiB
C
2641 lines
74 KiB
C
/**
|
|
* @file IxEthAccMac.c
|
|
*
|
|
* @author Intel Corporation
|
|
* @date
|
|
*
|
|
* @brief MAC control functions
|
|
*
|
|
* Design Notes:
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
#include "IxOsal.h"
|
|
#include "IxNpeMh.h"
|
|
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
|
|
#include "IxEthDB.h"
|
|
#endif
|
|
#include "IxEthDBPortDefs.h"
|
|
#include "IxEthNpe.h"
|
|
#include "IxEthAcc.h"
|
|
#include "IxEthAccDataPlane_p.h"
|
|
#include "IxEthAcc_p.h"
|
|
#include "IxEthAccMac_p.h"
|
|
|
|
/* Maximum number of retries during ixEthAccPortDisable, which
|
|
* is approximately 10 seconds
|
|
*/
|
|
#define IX_ETH_ACC_MAX_RETRY 500
|
|
|
|
/* Maximum number of retries during ixEthAccPortDisable when expecting
|
|
* timeout
|
|
*/
|
|
#define IX_ETH_ACC_MAX_RETRY_TIMEOUT 5
|
|
|
|
#define IX_ETH_ACC_VALIDATE_PORT_ID(portId) \
|
|
do \
|
|
{ \
|
|
if(!IX_ETH_ACC_IS_PORT_VALID(portId)) \
|
|
{ \
|
|
return IX_ETH_ACC_INVALID_PORT; \
|
|
} \
|
|
} while(0)
|
|
|
|
PUBLIC IxEthAccMacState ixEthAccMacState[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
|
|
PRIVATE UINT32 ixEthAccMacBase[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
|
|
/*Forward function declarations*/
|
|
PRIVATE void
|
|
ixEthAccPortDisableRx (IxEthAccPortId portId,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
BOOL useMultiBufferCallback);
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
BOOL useMultiBufferCallback);
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableTxDone (UINT32 cbTag,
|
|
IX_OSAL_MBUF *mbuf);
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableTxDoneAndSubmit (UINT32 cbTag,
|
|
IX_OSAL_MBUF *mbuf);
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableRxCallback (UINT32 cbTag,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
UINT32 learnedPortId);
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
|
|
IX_OSAL_MBUF **mBufPtr);
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortDisableTryTransmit(UINT32 portId);
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortDisableTryReplenish(UINT32 portId);
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr);
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr);
|
|
|
|
PRIVATE void
|
|
ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg);
|
|
|
|
PRIVATE void
|
|
ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg);
|
|
|
|
PRIVATE void
|
|
ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg);
|
|
|
|
PRIVATE void
|
|
ixEthAccMulticastAddressSet(IxEthAccPortId portId);
|
|
|
|
PRIVATE BOOL
|
|
ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
|
|
IxEthAccMacAddr *macAddr2);
|
|
|
|
PRIVATE void
|
|
ixEthAccMacPrint(IxEthAccMacAddr *m);
|
|
|
|
PRIVATE void
|
|
ixEthAccMacStateUpdate(IxEthAccPortId portId);
|
|
|
|
IxEthAccStatus
|
|
ixEthAccMacMemInit(void)
|
|
{
|
|
ixEthAccMacBase[IX_ETH_PORT_1] =
|
|
(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE,
|
|
IX_OSAL_IXP400_ETHA_MAP_SIZE);
|
|
ixEthAccMacBase[IX_ETH_PORT_2] =
|
|
(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_1_BASE,
|
|
IX_OSAL_IXP400_ETHB_MAP_SIZE);
|
|
#ifdef __ixp46X
|
|
ixEthAccMacBase[IX_ETH_PORT_3] =
|
|
(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_2_BASE,
|
|
IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE);
|
|
if (ixEthAccMacBase[IX_ETH_PORT_3] == 0)
|
|
{
|
|
ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
|
|
IX_OSAL_LOG_DEV_STDOUT,
|
|
"EthAcc: Could not map MAC I/O memory\n",
|
|
0, 0, 0, 0, 0 ,0);
|
|
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
#endif
|
|
|
|
if (ixEthAccMacBase[IX_ETH_PORT_1] == 0
|
|
|| ixEthAccMacBase[IX_ETH_PORT_2] == 0)
|
|
{
|
|
ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
|
|
IX_OSAL_LOG_DEV_STDOUT,
|
|
"EthAcc: Could not map MAC I/O memory\n",
|
|
0, 0, 0, 0, 0 ,0);
|
|
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
void
|
|
ixEthAccMacUnload(void)
|
|
{
|
|
IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_1]);
|
|
IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_2]);
|
|
#ifdef __ixp46X
|
|
IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_3]);
|
|
ixEthAccMacBase[IX_ETH_PORT_3] = 0;
|
|
#endif
|
|
ixEthAccMacBase[IX_ETH_PORT_2] = 0;
|
|
ixEthAccMacBase[IX_ETH_PORT_1] = 0;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortEnablePriv(IxEthAccPortId portId)
|
|
{
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
printf("EthAcc: (Mac) cannot enable port %d, port not initialized\n", portId);
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
if (ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn == NULL)
|
|
{
|
|
/* TxDone callback not registered */
|
|
printf("EthAcc: (Mac) cannot enable port %d, TxDone callback not registered\n", portId);
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
if ((ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn == NULL)
|
|
&& (ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn == NULL))
|
|
{
|
|
/* Receive callback not registered */
|
|
printf("EthAcc: (Mac) cannot enable port %d, Rx callback not registered\n", portId);
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
if(!ixEthAccMacState[portId].initDone)
|
|
{
|
|
printf("EthAcc: (Mac) cannot enable port %d, MAC address not set\n", portId);
|
|
return (IX_ETH_ACC_MAC_UNINITIALIZED);
|
|
}
|
|
|
|
/* if the state is being set to what it is already at, do nothing*/
|
|
if (ixEthAccMacState[portId].enabled)
|
|
{
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
|
|
/* enable ethernet database for this port */
|
|
if (ixEthDBPortEnable(portId) != IX_ETH_DB_SUCCESS)
|
|
{
|
|
printf("EthAcc: (Mac) cannot enable port %d, EthDB failure\n", portId);
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
#endif
|
|
|
|
/* set the MAC core registers */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL2,
|
|
IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RANDOM_SEED,
|
|
IX_ETH_ACC_RANDOM_SEED_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_THRESH_P_EMPTY,
|
|
IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_THRESH_P_FULL,
|
|
IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_DEFER,
|
|
IX_ETH_ACC_MAC_TX_DEFER_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_TWO_DEFER_1,
|
|
IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_TWO_DEFER_2,
|
|
IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_SLOT_TIME,
|
|
IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH,
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_BUF_SIZE_TX,
|
|
IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
IX_ETH_ACC_TX_CNTRL1_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
IX_ETH_ACC_RX_CNTRL1_DEFAULT);
|
|
|
|
/* set the global state */
|
|
ixEthAccMacState[portId].portDisableState = ACTIVE;
|
|
ixEthAccMacState[portId].enabled = TRUE;
|
|
|
|
/* rewrite the setup (including mac filtering) depending
|
|
* on current options
|
|
*/
|
|
ixEthAccMacStateUpdate(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* PortDisable local variables. They contain the intermediate steps
|
|
* while the port is being disabled and the buffers being drained out
|
|
* of the NPE.
|
|
*/
|
|
typedef void (*IxEthAccPortDisableRx)(IxEthAccPortId portId,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
BOOL useMultiBufferCallback);
|
|
static IxEthAccPortRxCallback
|
|
ixEthAccPortDisableFn[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
static IxEthAccPortMultiBufferRxCallback
|
|
ixEthAccPortDisableMultiBufferFn[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
static IxEthAccPortDisableRx
|
|
ixEthAccPortDisableRxTable[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
static UINT32
|
|
ixEthAccPortDisableCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
static UINT32
|
|
ixEthAccPortDisableMultiBufferCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
|
|
static IxEthAccPortTxDoneCallback
|
|
ixEthAccPortDisableTxDoneFn[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
static UINT32
|
|
ixEthAccPortDisableTxDoneCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
|
|
static UINT32
|
|
ixEthAccPortDisableUserBufferCount[IX_ETH_ACC_NUMBER_OF_PORTS];
|
|
|
|
/*
|
|
* PortDisable private callbacks functions. They handle the user
|
|
* traffic, and the special buffers (one for tx, one for rx) used
|
|
* in portDisable.
|
|
*/
|
|
PRIVATE void
|
|
ixEthAccPortDisableTxDone(UINT32 cbTag,
|
|
IX_OSAL_MBUF *mbuf)
|
|
{
|
|
IxEthAccPortId portId = (IxEthAccPortId)cbTag;
|
|
volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
|
|
|
|
/* check for the special mbuf used in portDisable */
|
|
if (mbuf == ixEthAccMacState[portId].portDisableTxMbufPtr)
|
|
{
|
|
*txState = TRANSMIT_DONE;
|
|
}
|
|
else
|
|
{
|
|
/* increment the count of user traffic during portDisable */
|
|
ixEthAccPortDisableUserBufferCount[portId]++;
|
|
|
|
/* call client TxDone function */
|
|
ixEthAccPortDisableTxDoneFn[portId](ixEthAccPortDisableTxDoneCbTag[portId], mbuf);
|
|
}
|
|
}
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortDisableTryTransmit(UINT32 portId)
|
|
{
|
|
int key;
|
|
IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
|
|
volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
|
|
/* transmit the special buffer again if it is transmitted
|
|
* and update the txState
|
|
* This section is protected because the portDisable context
|
|
* run an identical code, so the system keeps transmitting at the
|
|
* maximum rate.
|
|
*/
|
|
key = ixOsalIrqLock();
|
|
if (*txState == TRANSMIT_DONE)
|
|
{
|
|
IX_OSAL_MBUF *mbufTxPtr = ixEthAccMacState[portId].portDisableTxMbufPtr;
|
|
*txState = TRANSMIT;
|
|
status = ixEthAccPortTxFrameSubmit(portId,
|
|
mbufTxPtr,
|
|
IX_ETH_ACC_TX_DEFAULT_PRIORITY);
|
|
}
|
|
ixOsalIrqUnlock(key);
|
|
|
|
return status;
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableTxDoneAndSubmit(UINT32 cbTag,
|
|
IX_OSAL_MBUF *mbuf)
|
|
{
|
|
IxEthAccPortId portId = (IxEthAccPortId)cbTag;
|
|
|
|
/* call the callback which forwards the traffic to the client */
|
|
ixEthAccPortDisableTxDone(cbTag, mbuf);
|
|
|
|
/* try to transmit the buffer used in portDisable
|
|
* if seen in TxDone
|
|
*/
|
|
ixEthAccPortDisableTryTransmit(portId);
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableRx (IxEthAccPortId portId,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
BOOL useMultiBufferCallback)
|
|
{
|
|
volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
|
|
IX_OSAL_MBUF *mNextPtr;
|
|
|
|
while (mBufPtr)
|
|
{
|
|
mNextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr);
|
|
IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr) = NULL;
|
|
|
|
/* check for the special mbuf used in portDisable */
|
|
if (mBufPtr == ixEthAccMacState[portId].portDisableRxMbufPtr)
|
|
{
|
|
*rxState = RECEIVE;
|
|
}
|
|
else
|
|
{
|
|
/* increment the count of user traffic during portDisable */
|
|
ixEthAccPortDisableUserBufferCount[portId]++;
|
|
|
|
/* reset the received payload length during portDisable */
|
|
IX_OSAL_MBUF_MLEN(mBufPtr) = 0;
|
|
IX_OSAL_MBUF_PKT_LEN(mBufPtr) = 0;
|
|
|
|
if (useMultiBufferCallback)
|
|
{
|
|
/* call the user callback with one unchained
|
|
* buffer, without payload. A small array is built
|
|
* to be used as a parameter (the user callback expects
|
|
* to receive an array ended by a NULL pointer.
|
|
*/
|
|
IX_OSAL_MBUF *mBufPtrArray[2];
|
|
|
|
mBufPtrArray[0] = mBufPtr;
|
|
mBufPtrArray[1] = NULL;
|
|
ixEthAccPortDisableMultiBufferFn[portId](
|
|
ixEthAccPortDisableMultiBufferCbTag[portId],
|
|
mBufPtrArray);
|
|
}
|
|
else
|
|
{
|
|
/* call the user callback with a unchained
|
|
* buffer, without payload and the destination port is
|
|
* unknown.
|
|
*/
|
|
ixEthAccPortDisableFn[portId](
|
|
ixEthAccPortDisableCbTag[portId],
|
|
mBufPtr,
|
|
IX_ETH_DB_UNKNOWN_PORT /* port not found */);
|
|
}
|
|
}
|
|
|
|
mBufPtr = mNextPtr;
|
|
}
|
|
}
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortDisableTryReplenish(UINT32 portId)
|
|
{
|
|
int key;
|
|
IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
|
|
volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
|
|
/* replenish with the special buffer again if it is received
|
|
* and update the rxState
|
|
* This section is protected because the portDisable context
|
|
* run an identical code, so the system keeps replenishing at the
|
|
* maximum rate.
|
|
*/
|
|
key = ixOsalIrqLock();
|
|
if (*rxState == RECEIVE)
|
|
{
|
|
IX_OSAL_MBUF *mbufRxPtr = ixEthAccMacState[portId].portDisableRxMbufPtr;
|
|
*rxState = REPLENISH;
|
|
IX_OSAL_MBUF_MLEN(mbufRxPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
|
|
status = ixEthAccPortRxFreeReplenish(portId, mbufRxPtr);
|
|
}
|
|
ixOsalIrqUnlock(key);
|
|
|
|
return status;
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
BOOL useMultiBufferCallback)
|
|
{
|
|
/* call the callback which forwards the traffic to the client */
|
|
ixEthAccPortDisableRx(portId, mBufPtr, useMultiBufferCallback);
|
|
|
|
/* try to replenish with the buffer used in portDisable
|
|
* if seen in Rx
|
|
*/
|
|
ixEthAccPortDisableTryReplenish(portId);
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableRxCallback (UINT32 cbTag,
|
|
IX_OSAL_MBUF * mBufPtr,
|
|
UINT32 learnedPortId)
|
|
{
|
|
IxEthAccPortId portId = (IxEthAccPortId)cbTag;
|
|
|
|
/* call the portDisable receive callback */
|
|
(ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, FALSE);
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
|
|
IX_OSAL_MBUF **mBufPtr)
|
|
{
|
|
IxEthAccPortId portId = (IxEthAccPortId)cbTag;
|
|
|
|
while (*mBufPtr)
|
|
{
|
|
/* call the portDisable receive callback with one buffer at a time */
|
|
(ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, TRUE);
|
|
}
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortDisablePriv(IxEthAccPortId portId)
|
|
{
|
|
IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
|
|
int key;
|
|
int retry, retryTimeout;
|
|
volatile IxEthAccPortDisableState *state = &ixEthAccMacState[portId].portDisableState;
|
|
volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
|
|
volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable port.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* if the state is being set to what it is already at, do nothing */
|
|
if (!ixEthAccMacState[portId].enabled)
|
|
{
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
*state = DISABLED;
|
|
|
|
/* disable MAC receive first */
|
|
ixEthAccPortRxDisablePriv(portId);
|
|
|
|
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
|
|
/* disable ethernet database for this port - It is done now to avoid
|
|
* issuing ELT maintenance after requesting 'port disable' in an NPE
|
|
*/
|
|
if (ixEthDBPortDisable(portId) != IX_ETH_DB_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
IX_ETH_ACC_FATAL_LOG("ixEthAccPortDisable: failed to disable EthDB for this port\n", 0, 0, 0, 0, 0, 0);
|
|
}
|
|
#endif
|
|
|
|
/* enter the critical section */
|
|
key = ixOsalIrqLock();
|
|
|
|
/* swap the Rx and TxDone callbacks */
|
|
ixEthAccPortDisableFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn;
|
|
ixEthAccPortDisableMultiBufferFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn;
|
|
ixEthAccPortDisableCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag;
|
|
ixEthAccPortDisableMultiBufferCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag;
|
|
ixEthAccPortDisableTxDoneFn[portId] = ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn;
|
|
ixEthAccPortDisableTxDoneCbTag[portId] = ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag;
|
|
ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx;
|
|
|
|
/* register temporary callbacks */
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableRxCallback;
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = portId;
|
|
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferRxCallback;
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = portId;
|
|
|
|
ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDone;
|
|
ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = portId;
|
|
|
|
/* initialise the Rx state and Tx states */
|
|
*txState = TRANSMIT_DONE;
|
|
*rxState = RECEIVE;
|
|
|
|
/* exit the critical section */
|
|
ixOsalIrqUnlock(key);
|
|
|
|
/* enable a NPE loopback */
|
|
if (ixEthAccNpeLoopbackEnablePriv(portId) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
retry = 0;
|
|
|
|
/* Step 1 : Drain Tx traffic and TxDone queues :
|
|
*
|
|
* Transmit and replenish at least once with the
|
|
* special buffers until both of them are seen
|
|
* in the callback hook
|
|
*
|
|
* (the receive callback keeps replenishing, so once we see
|
|
* the special Tx buffer, we can be sure that Tx drain is complete)
|
|
*/
|
|
ixEthAccPortDisableRxTable[portId]
|
|
= ixEthAccPortDisableRxAndReplenish;
|
|
ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
|
|
= ixEthAccPortDisableTxDone;
|
|
|
|
do
|
|
{
|
|
/* keep replenishing */
|
|
status = ixEthAccPortDisableTryReplenish(portId);
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* keep transmitting */
|
|
status = ixEthAccPortDisableTryTransmit(portId);
|
|
}
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* wait for some traffic being processed */
|
|
ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
|
|
}
|
|
}
|
|
while ((status == IX_ETH_ACC_SUCCESS)
|
|
&& (retry++ < IX_ETH_ACC_MAX_RETRY)
|
|
&& (*txState == TRANSMIT));
|
|
|
|
/* Step 2 : Drain Rx traffic, RxFree and Rx queues :
|
|
*
|
|
* Transmit and replenish at least once with the
|
|
* special buffers until both of them are seen
|
|
* in the callback hook
|
|
* (the transmit callback keeps transmitting, and when we see
|
|
* the special Rx buffer, we can be sure that rxFree drain
|
|
* is complete)
|
|
*
|
|
* The nested loop helps to retry if the user was keeping
|
|
* replenishing or transmitting during portDisable.
|
|
*
|
|
* The 2 nested loops ensure more retries if user traffic is
|
|
* seen during portDisable : the user should not replenish
|
|
* or transmit while portDisable is running. However, because of
|
|
* the queueing possibilities in ethAcc dataplane, it is possible
|
|
* that a lot of traffic is left in the queues (e.g. when
|
|
* transmitting over a low speed link) and therefore, more
|
|
* retries are allowed to help flushing the buffers out.
|
|
*/
|
|
ixEthAccPortDisableRxTable[portId]
|
|
= ixEthAccPortDisableRx;
|
|
ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
|
|
= ixEthAccPortDisableTxDoneAndSubmit;
|
|
|
|
do
|
|
{
|
|
do
|
|
{
|
|
ixEthAccPortDisableUserBufferCount[portId] = 0;
|
|
|
|
/* keep replenishing */
|
|
status = ixEthAccPortDisableTryReplenish(portId);
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* keep transmitting */
|
|
status = ixEthAccPortDisableTryTransmit(portId);
|
|
}
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* wait for some traffic being processed */
|
|
ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
|
|
}
|
|
}
|
|
while ((status == IX_ETH_ACC_SUCCESS)
|
|
&& (retry++ < IX_ETH_ACC_MAX_RETRY)
|
|
&& ((ixEthAccPortDisableUserBufferCount[portId] != 0)
|
|
|| (*rxState == REPLENISH)));
|
|
|
|
/* After the first iteration, change the receive callbacks,
|
|
* to process only 1 buffer at a time
|
|
*/
|
|
ixEthAccPortDisableRxTable[portId]
|
|
= ixEthAccPortDisableRx;
|
|
ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
|
|
= ixEthAccPortDisableTxDone;
|
|
|
|
/* repeat the whole process while user traffic is seen in TxDone
|
|
*
|
|
* The conditions to stop the loop are
|
|
* - Xscale has both Rx and Tx special buffers
|
|
* (txState = transmit, rxState = receive)
|
|
* - any error in txSubmit or rxReplenish
|
|
* - no user traffic seen
|
|
* - an excessive amount of retries
|
|
*/
|
|
}
|
|
while ((status == IX_ETH_ACC_SUCCESS)
|
|
&& (retry < IX_ETH_ACC_MAX_RETRY)
|
|
&& (*txState == TRANSMIT));
|
|
|
|
/* check the loop exit conditions. The NPE should not hold
|
|
* the special buffers.
|
|
*/
|
|
if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* Step 3 : Replenish without transmitting until a timeout
|
|
* occurs, in order to drain the internal NPE fifos
|
|
*
|
|
* we can expect a few frames srill held
|
|
* in the NPE.
|
|
*
|
|
* The 2 nested loops take care about the NPE dropping traffic
|
|
* (including loopback traffic) when the Rx queue is full.
|
|
*
|
|
* The timeout value is very conservative
|
|
* since the loopback used keeps replenishhing.
|
|
*
|
|
*/
|
|
do
|
|
{
|
|
ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRxAndReplenish;
|
|
ixEthAccPortDisableUserBufferCount[portId] = 0;
|
|
retryTimeout = 0;
|
|
do
|
|
{
|
|
/* keep replenishing */
|
|
status = ixEthAccPortDisableTryReplenish(portId);
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
/* wait for some traffic being processed */
|
|
ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
|
|
}
|
|
}
|
|
while ((status == IX_ETH_ACC_SUCCESS)
|
|
&& (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
|
|
|
|
/* Step 4 : Transmit once. Stop replenish
|
|
*
|
|
* After the Rx timeout, we are sure that the NPE does not
|
|
* hold any frame in its internal NPE fifos.
|
|
*
|
|
* At this point, the NPE still holds the last rxFree buffer.
|
|
* By transmitting a single frame, this should unblock the
|
|
* last rxFree buffer. This code just transmit once and
|
|
* wait for both frames seen in TxDone and in rxFree.
|
|
*
|
|
*/
|
|
ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx;
|
|
status = ixEthAccPortDisableTryTransmit(portId);
|
|
|
|
/* the NPE should immediatelyt release
|
|
* the last Rx buffer and the last transmitted buffer
|
|
* unless the last Tx frame was dropped (rx queue full)
|
|
*/
|
|
if (status == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
retryTimeout = 0;
|
|
do
|
|
{
|
|
ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
|
|
}
|
|
while ((*rxState == REPLENISH)
|
|
&& (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
|
|
}
|
|
|
|
/* the NPE may have dropped the traffic because of Rx
|
|
* queue being full. This code ensures that the last
|
|
* Tx and Rx frames are both received.
|
|
*/
|
|
}
|
|
while ((status == IX_ETH_ACC_SUCCESS)
|
|
&& (retry++ < IX_ETH_ACC_MAX_RETRY)
|
|
&& ((*txState == TRANSMIT)
|
|
|| (*rxState == REPLENISH)
|
|
|| (ixEthAccPortDisableUserBufferCount[portId] != 0)));
|
|
|
|
/* Step 5 : check the final states : the NPE has
|
|
* no buffer left, nor in Tx , nor in Rx directions.
|
|
*/
|
|
if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
}
|
|
|
|
/* now all the buffers are drained, disable NPE loopback
|
|
* This is done regardless of the logic to drain the queues and
|
|
* the internal buffers held by the NPE.
|
|
*/
|
|
if (ixEthAccNpeLoopbackDisablePriv(portId) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
}
|
|
|
|
/* disable MAC Tx and Rx services */
|
|
ixEthAccMacState[portId].enabled = FALSE;
|
|
ixEthAccMacStateUpdate(portId);
|
|
|
|
/* restore the Rx and TxDone callbacks (within a critical section) */
|
|
key = ixOsalIrqLock();
|
|
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableFn[portId];
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = ixEthAccPortDisableCbTag[portId];
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferFn[portId];
|
|
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = ixEthAccPortDisableMultiBufferCbTag[portId];
|
|
ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDoneFn[portId];
|
|
ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = ixEthAccPortDisableTxDoneCbTag[portId];
|
|
|
|
ixOsalIrqUnlock(key);
|
|
|
|
/* the MAC core rx/tx disable may left the MAC hardware in an
|
|
* unpredictable state. A hw reset is executed before resetting
|
|
* all the MAC parameters to a known value.
|
|
*/
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_RESET);
|
|
|
|
ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
|
|
|
|
/* rewrite all parameters to their current value */
|
|
ixEthAccMacStateUpdate(portId);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH,
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_MDC_EN);
|
|
|
|
return status;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled)
|
|
{
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
|
|
|
|
/* Since Eth NPE is not available, port must be disabled */
|
|
*enabled = FALSE ;
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
/* Since Eth NPE is not available, port must be disabled */
|
|
*enabled = FALSE ;
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
*enabled = ixEthAccMacState[portId].enabled;
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortMacResetPriv(IxEthAccPortId portId)
|
|
{
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot reset Ethernet coprocessor.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_RESET);
|
|
|
|
ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
|
|
|
|
/* rewrite all parameters to their current value */
|
|
ixEthAccMacStateUpdate(portId);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH,
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_MDC_EN);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortLoopbackEnable(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable loopback.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* read register */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
/* update register */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_LOOP_EN);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg)
|
|
{
|
|
IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
|
|
|
|
#ifndef NDEBUG
|
|
/* Prudent to at least check the port is within range */
|
|
if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
|
|
{
|
|
IX_ETH_ACC_FATAL_LOG("IXETHACC:ixEthAccPortDisableMessageCallback: Illegal port: %u\n",
|
|
(UINT32) portId, 0, 0, 0, 0, 0);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* unlock message reception mutex */
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].npeLoopbackMessageLock);
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId)
|
|
{
|
|
IX_STATUS npeMhStatus;
|
|
IxNpeMhMessage message;
|
|
IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* enable NPE loopback (lsb of the message contains the value 1) */
|
|
message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL)
|
|
| 0x01;
|
|
message.data[1] = 0;
|
|
|
|
npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
|
|
message,
|
|
IX_ETHNPE_SETLOOPBACK_MODE_ACK,
|
|
ixEthAccNpeLoopbackMessageCallback,
|
|
IX_NPEMH_SEND_RETRIES_DEFAULT);
|
|
|
|
if (npeMhStatus != IX_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
else
|
|
{
|
|
/* wait for NPE loopbackEnable response */
|
|
if (ixOsalMutexLock(&ixEthAccMacState[portId]. npeLoopbackMessageLock,
|
|
IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
|
|
!= IX_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxEnablePriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable TX.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* read register */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
/* update register */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortRxEnablePriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable RX.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* read register */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
/* update register */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortLoopbackDisable(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable loopback.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*disable MAC loopabck */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
(regval & ~IX_ETH_ACC_RX_CNTRL1_LOOP_EN));
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId)
|
|
{
|
|
IX_STATUS npeMhStatus;
|
|
IxNpeMhMessage message;
|
|
IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* disable NPE loopback (lsb of the message contains the value 0) */
|
|
message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL);
|
|
message.data[1] = 0;
|
|
|
|
npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
|
|
message,
|
|
IX_ETHNPE_SETLOOPBACK_MODE_ACK,
|
|
ixEthAccNpeLoopbackMessageCallback,
|
|
IX_NPEMH_SEND_RETRIES_DEFAULT);
|
|
|
|
if (npeMhStatus != IX_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
else
|
|
{
|
|
/* wait for NPE loopbackEnable response */
|
|
if (ixOsalMutexLock(&ixEthAccMacState[portId].npeLoopbackMessageLock,
|
|
IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
|
|
!= IX_SUCCESS)
|
|
{
|
|
status = IX_ETH_ACC_FAIL;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxDisablePriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable TX.\n", (INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* read register */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
/* update register */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
(regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN));
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortRxDisablePriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable RX.\n", (INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* read register */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
/* update register */
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
(regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN));
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/* Turn off promiscuous mode */
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*set bit 5 of Rx control 1 - enable address filtering*/
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
|
|
|
|
ixEthAccMacState[portId].promiscuous = FALSE;
|
|
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*
|
|
* Set bit 5 of Rx control 1 - We enable address filtering even in
|
|
* promiscuous mode because we want the MAC to set the appropriate
|
|
* bits in m_flags which doesn't happen if we turn off filtering.
|
|
*/
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
|
|
|
|
ixEthAccMacState[portId].promiscuous = TRUE;
|
|
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
UINT32 i;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
|
|
if (macAddr == NULL)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
if ( macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT )
|
|
{
|
|
/* This is a multicast/broadcast address cant set it ! */
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
if ( macAddr->macAddress[0] == 0 &&
|
|
macAddr->macAddress[1] == 0 &&
|
|
macAddr->macAddress[2] == 0 &&
|
|
macAddr->macAddress[3] == 0 &&
|
|
macAddr->macAddress[4] == 0 &&
|
|
macAddr->macAddress[5] == 0 )
|
|
{
|
|
/* This is an invalid mac address cant set it ! */
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
|
|
/* update the MAC address in the ethernet database */
|
|
if (ixEthDBPortAddressSet(portId, (IxEthDBMacAddr *) macAddr) != IX_ETH_DB_SUCCESS)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
#endif
|
|
|
|
/*Set the Unicast MAC to the specified value*/
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
|
|
macAddr->macAddress[i]);
|
|
}
|
|
ixEthAccMacState[portId].initDone = TRUE;
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortUnicastMacAddressGetPriv (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
/*Return the current value of the Unicast MAC from h/w
|
|
for the specified port*/
|
|
UINT32 i;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
|
|
/* Since Eth Npe is unavailable, return invalid MAC Address = 00:00:00:00:00:00 */
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
macAddr->macAddress[i] = 0;
|
|
}
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if(!ixEthAccMacState[portId].initDone)
|
|
{
|
|
return (IX_ETH_ACC_MAC_UNINITIALIZED);
|
|
}
|
|
|
|
if (macAddr == NULL)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
|
|
macAddr->macAddress[i]);
|
|
}
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
/*Return the current value of the Multicast MAC from h/w
|
|
for the specified port*/
|
|
UINT32 i;
|
|
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_ADDR_1 + i*sizeof(UINT32),
|
|
macAddr->macAddress[i]);
|
|
}
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
PRIVATE IxEthAccStatus
|
|
ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
/*Return the current value of the Multicast MAC from h/w
|
|
for the specified port*/
|
|
UINT32 i;
|
|
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_ADDR_MASK_1 + i*sizeof(UINT32),
|
|
macAddr->macAddress[i]);
|
|
}
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortMulticastAddressJoinPriv (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
UINT32 i;
|
|
IxEthAccMacAddr broadcastAddr = {{0xff,0xff,0xff,0xff,0xff,0xff}};
|
|
|
|
/*Check that the port parameter is valid*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join Multicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*Check that the mac address is valid*/
|
|
if(macAddr == NULL)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
/* Check that this is a multicast address */
|
|
if (!(macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT))
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
/* We don't add the Broadcast address */
|
|
if(ixEthAccMacEqual(&broadcastAddr, macAddr))
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
for (i = 0;
|
|
i<ixEthAccMacState[portId].mcastAddrIndex;
|
|
i++)
|
|
{
|
|
/*Check if the current entry already match an existing matches*/
|
|
if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i], macAddr))
|
|
{
|
|
/* Address found in the list and already configured,
|
|
* return a success status
|
|
*/
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
}
|
|
|
|
/* check for availability at the end of the current table */
|
|
if(ixEthAccMacState[portId].mcastAddrIndex >= IX_ETH_ACC_MAX_MULTICAST_ADDRESSES)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
/*First add the address to the multicast table for the
|
|
specified port*/
|
|
i=ixEthAccMacState[portId].mcastAddrIndex;
|
|
|
|
memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
|
|
&macAddr->macAddress,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
|
|
/*Increment the index into the table, this must be done here
|
|
as MulticastAddressSet below needs to know about the latest
|
|
entry.
|
|
*/
|
|
ixEthAccMacState[portId].mcastAddrIndex++;
|
|
|
|
/*Then calculate the new value to be written to the address and
|
|
address mask registers*/
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId)
|
|
{
|
|
IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
|
|
|
|
/*Check that the port parameter is valid*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/* remove all entries from the database and
|
|
* insert a multicast entry
|
|
*/
|
|
memcpy(&ixEthAccMacState[portId].mcastAddrsTable[0],
|
|
&mcastMacAddr.macAddress,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
|
|
ixEthAccMacState[portId].mcastAddrIndex = 1;
|
|
ixEthAccMacState[portId].joinAll = TRUE;
|
|
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId,
|
|
IxEthAccMacAddr *macAddr)
|
|
{
|
|
UINT32 i;
|
|
IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
|
|
|
|
/*Check that the port parameter is valid*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave Multicast Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*Check that the mac address is valid*/
|
|
if(macAddr == NULL)
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
/* Remove this mac address from the mask for the specified port
|
|
* we copy down all entries above the blanked entry, and
|
|
* decrement the index
|
|
*/
|
|
i=0;
|
|
|
|
while(i<ixEthAccMacState[portId].mcastAddrIndex)
|
|
{
|
|
/*Check if the current entry matches*/
|
|
if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i],
|
|
macAddr))
|
|
{
|
|
if(ixEthAccMacEqual(macAddr, &mcastMacAddr))
|
|
{
|
|
ixEthAccMacState[portId].joinAll = FALSE;
|
|
}
|
|
/*Decrement the index into the multicast address table
|
|
for the current port*/
|
|
ixEthAccMacState[portId].mcastAddrIndex--;
|
|
|
|
/*Copy down all entries above the current entry*/
|
|
while(i<ixEthAccMacState[portId].mcastAddrIndex)
|
|
{
|
|
memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
|
|
&ixEthAccMacState[portId].mcastAddrsTable[i+1],
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
i++;
|
|
}
|
|
/*recalculate the mask and write it to the MAC*/
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
/* search the next entry */
|
|
i++;
|
|
}
|
|
/* no matching entry found */
|
|
return IX_ETH_ACC_NO_SUCH_ADDR;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId)
|
|
{
|
|
/*Check that the port parameter is valid*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
ixEthAccMacState[portId].mcastAddrIndex = 0;
|
|
ixEthAccMacState[portId].joinAll = FALSE;
|
|
|
|
ixEthAccMulticastAddressSet(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortUnicastAddressShowPriv (IxEthAccPortId portId)
|
|
{
|
|
IxEthAccMacAddr macAddr;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Unicast Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
/*Get the MAC (UINICAST) address from hardware*/
|
|
if(ixEthAccPortUnicastMacAddressGetPriv(portId, &macAddr) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: MAC address uninitialised port %u\n",
|
|
(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_MAC_UNINITIALIZED;
|
|
}
|
|
|
|
/*print it out*/
|
|
ixEthAccMacPrint(&macAddr);
|
|
printf("\n");
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
|
|
void
|
|
ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId)
|
|
{
|
|
IxEthAccMacAddr macAddr;
|
|
UINT32 i;
|
|
|
|
if(!IX_ETH_ACC_IS_PORT_VALID(portId))
|
|
{
|
|
return;
|
|
}
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Multicast Address.\n",(INT32)portId,0,0,0,0,0);
|
|
return ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return;
|
|
}
|
|
|
|
printf("Multicast MAC: ");
|
|
/*Get the MAC (MULTICAST) address from hardware*/
|
|
ixEthAccPortMulticastMacAddressGet(portId, &macAddr);
|
|
/*print it out*/
|
|
ixEthAccMacPrint(&macAddr);
|
|
/*Get the MAC (MULTICAST) filter from hardware*/
|
|
ixEthAccPortMulticastMacFilterGet(portId, &macAddr);
|
|
/*print it out*/
|
|
printf(" ( ");
|
|
ixEthAccMacPrint(&macAddr);
|
|
printf(" )\n");
|
|
printf("Constituent Addresses:\n");
|
|
for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
|
|
{
|
|
ixEthAccMacPrint(&ixEthAccMacState[portId].mcastAddrsTable[i]);
|
|
printf("\n");
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*Set the duplex mode*/
|
|
IxEthAccStatus
|
|
ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId,
|
|
IxEthAccDuplexMode mode)
|
|
{
|
|
UINT32 txregval;
|
|
UINT32 rxregval;
|
|
|
|
/*This is bit 1 of the transmit control reg, set to 1 for half
|
|
duplex, 0 for full duplex*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
txregval);
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
rxregval);
|
|
|
|
if (mode == IX_ETH_ACC_FULL_DUPLEX)
|
|
{
|
|
/*Clear half duplex bit in TX*/
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
txregval & ~IX_ETH_ACC_TX_CNTRL1_DUPLEX);
|
|
|
|
/*We must set the pause enable in the receive logic when in
|
|
full duplex mode*/
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
|
|
ixEthAccMacState[portId].fullDuplex = TRUE;
|
|
|
|
}
|
|
else if (mode == IX_ETH_ACC_HALF_DUPLEX)
|
|
{
|
|
/*Set half duplex bit in TX*/
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
txregval | IX_ETH_ACC_TX_CNTRL1_DUPLEX);
|
|
|
|
/*We must clear pause enable in the receive logic when in
|
|
half duplex mode*/
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
|
|
|
|
ixEthAccMacState[portId].fullDuplex = FALSE;
|
|
}
|
|
else
|
|
{
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortDuplexModeGetPriv (IxEthAccPortId portId,
|
|
IxEthAccDuplexMode *mode)
|
|
{
|
|
/*Return the duplex mode for the specified port*/
|
|
UINT32 regval;
|
|
|
|
/*This is bit 1 of the transmit control reg, set to 1 for half
|
|
duplex, 0 for full duplex*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
|
|
/* return hald duplex */
|
|
*mode = IX_ETH_ACC_HALF_DUPLEX ;
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
if (mode == NULL)
|
|
{
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
if( regval & IX_ETH_ACC_TX_CNTRL1_DUPLEX)
|
|
{
|
|
*mode = IX_ETH_ACC_HALF_DUPLEX;
|
|
}
|
|
else
|
|
{
|
|
*mode = IX_ETH_ACC_FULL_DUPLEX;
|
|
}
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
/*Enable FCS computation by the MAC and appending to the
|
|
frame*/
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval |
|
|
IX_ETH_ACC_TX_CNTRL1_PAD_EN);
|
|
|
|
ixEthAccMacState[portId].txPADAppend = TRUE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/*disable FCS computation and appending*/
|
|
/*Set bit 4 of Tx control register one to zero*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disble Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN);
|
|
|
|
ixEthAccMacState[portId].txPADAppend = FALSE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/*Enable FCS computation by the MAC and appending to the
|
|
frame*/
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN);
|
|
|
|
ixEthAccMacState[portId].txFCSAppend = TRUE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/*disable FCS computation and appending*/
|
|
/*Set bit 4 of Tx control register one to zero*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN);
|
|
|
|
ixEthAccMacState[portId].txFCSAppend = FALSE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
|
|
{
|
|
/*Set bit 2 of Rx control 1*/
|
|
UINT32 regval;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN);
|
|
|
|
ixEthAccMacState[portId].rxFCSAppend = TRUE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
/*Clear bit 2 of Rx control 1*/
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN);
|
|
|
|
ixEthAccMacState[portId].rxFCSAppend = FALSE;
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
|
|
PRIVATE void
|
|
ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg)
|
|
{
|
|
IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
|
|
|
|
#ifndef NDEBUG
|
|
/* Prudent to at least check the port is within range */
|
|
if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
|
|
{
|
|
IX_ETH_ACC_FATAL_LOG(
|
|
"IXETHACC:ixEthAccMacNpeStatsMessageCallback: Illegal port: %u\n",
|
|
(UINT32)portId, 0, 0, 0, 0, 0);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*Unblock Stats Get call*/
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsLock);
|
|
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccMibIIStatsEndianConvert (IxEthEthObjStats *retStats)
|
|
{
|
|
/* endianness conversion */
|
|
|
|
/* Rx stats */
|
|
retStats->dot3StatsAlignmentErrors =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsAlignmentErrors);
|
|
retStats->dot3StatsFCSErrors =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsFCSErrors);
|
|
retStats->dot3StatsInternalMacReceiveErrors =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacReceiveErrors);
|
|
retStats->RxOverrunDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxOverrunDiscards);
|
|
retStats->RxLearnedEntryDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLearnedEntryDiscards);
|
|
retStats->RxLargeFramesDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLargeFramesDiscards);
|
|
retStats->RxSTPBlockedDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxSTPBlockedDiscards);
|
|
retStats->RxVLANTypeFilterDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANTypeFilterDiscards);
|
|
retStats->RxVLANIdFilterDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANIdFilterDiscards);
|
|
retStats->RxInvalidSourceDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxInvalidSourceDiscards);
|
|
retStats->RxBlackListDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxBlackListDiscards);
|
|
retStats->RxWhiteListDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxWhiteListDiscards);
|
|
retStats->RxUnderflowEntryDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxUnderflowEntryDiscards);
|
|
|
|
/* Tx stats */
|
|
retStats->dot3StatsSingleCollisionFrames =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsSingleCollisionFrames);
|
|
retStats->dot3StatsMultipleCollisionFrames =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsMultipleCollisionFrames);
|
|
retStats->dot3StatsDeferredTransmissions =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsDeferredTransmissions);
|
|
retStats->dot3StatsLateCollisions =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsLateCollisions);
|
|
retStats->dot3StatsExcessiveCollsions =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsExcessiveCollsions);
|
|
retStats->dot3StatsInternalMacTransmitErrors =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacTransmitErrors);
|
|
retStats->dot3StatsCarrierSenseErrors =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsCarrierSenseErrors);
|
|
retStats->TxLargeFrameDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxLargeFrameDiscards);
|
|
retStats->TxVLANIdFilterDiscards =
|
|
IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxVLANIdFilterDiscards);
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccMibIIStatsGet (IxEthAccPortId portId,
|
|
IxEthEthObjStats *retStats )
|
|
{
|
|
IxNpeMhMessage message;
|
|
|
|
if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGet (Mac) EthAcc service is not initialized\n");
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (retStats == NULL)
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NULL argument\n");
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NPE for port %d is not available\n", portId);
|
|
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
|
|
|
|
/* Return all zero stats */
|
|
IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
|
|
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGet (Mac) port %d is not initialized\n", portId);
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
|
|
|
|
message.data[0] = IX_ETHNPE_GETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
|
|
message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
|
|
|
|
/* Permit only one task to request MIB statistics Get operation
|
|
at a time */
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetAccessLock, IX_OSAL_WAIT_FOREVER);
|
|
|
|
if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
|
|
message,
|
|
IX_ETHNPE_GETSTATS,
|
|
ixEthAccMacNpeStatsMessageCallback,
|
|
IX_NPEMH_SEND_RETRIES_DEFAULT)
|
|
!= IX_SUCCESS)
|
|
{
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
|
|
|
|
printf("EthAcc: (Mac) StatsGet failed to send NPE message\n");
|
|
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
/* Wait for callback invocation indicating response to
|
|
this request - we need this mutex in order to ensure
|
|
that the return from this function is synchronous */
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
|
|
|
|
/* Permit other tasks to perform MIB statistics Get operation */
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
|
|
|
|
ixEthAccMibIIStatsEndianConvert (retStats);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
|
|
PRIVATE void
|
|
ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
|
|
IxNpeMhMessage msg)
|
|
{
|
|
IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
|
|
|
|
#ifndef NDEBUG
|
|
/* Prudent to at least check the port is within range */
|
|
if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
|
|
{
|
|
IX_ETH_ACC_FATAL_LOG(
|
|
"IXETHACC:ixEthAccMacNpeStatsResetMessageCallback: Illegal port: %u\n",
|
|
(UINT32)portId, 0, 0, 0, 0, 0);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*Unblock Stats Get & reset call*/
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsResetLock);
|
|
|
|
}
|
|
|
|
|
|
|
|
IxEthAccStatus
|
|
ixEthAccMibIIStatsGetClear (IxEthAccPortId portId,
|
|
IxEthEthObjStats *retStats)
|
|
{
|
|
IxNpeMhMessage message;
|
|
|
|
if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) EthAcc service is not initialized\n");
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (retStats == NULL)
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NULL argument\n");
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NPE for port %d is not available\n", portId);
|
|
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get and clear MIB II Stats.\n", (INT32)portId, 0, 0, 0, 0, 0);
|
|
|
|
/* Return all zero stats */
|
|
IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
|
|
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
|
|
{
|
|
printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) port %d is not initialized\n", portId);
|
|
return (IX_ETH_ACC_PORT_UNINITIALIZED);
|
|
}
|
|
|
|
IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
|
|
|
|
message.data[0] = IX_ETHNPE_RESETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
|
|
message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
|
|
|
|
/* Permit only one task to request MIB statistics Get-Reset operation at a time */
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock, IX_OSAL_WAIT_FOREVER);
|
|
|
|
if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
|
|
message,
|
|
IX_ETHNPE_RESETSTATS,
|
|
ixEthAccMacNpeStatsResetMessageCallback,
|
|
IX_NPEMH_SEND_RETRIES_DEFAULT)
|
|
!= IX_SUCCESS)
|
|
{
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
|
|
|
|
printf("EthAcc: (Mac) ixEthAccMibIIStatsGetClear failed to send NPE message\n");
|
|
|
|
return IX_ETH_ACC_FAIL;
|
|
}
|
|
|
|
/* Wait for callback invocation indicating response to this request */
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
|
|
|
|
/* permit other tasks to get and reset MIB stats*/
|
|
ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
|
|
|
|
ixEthAccMibIIStatsEndianConvert(retStats);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
IxEthAccStatus
|
|
ixEthAccMibIIStatsClear (IxEthAccPortId portId)
|
|
{
|
|
static IxEthEthObjStats retStats;
|
|
IxEthAccStatus status;
|
|
|
|
if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
|
|
{
|
|
return (IX_ETH_ACC_FAIL);
|
|
}
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
/* there is no reset operation without a corresponding Get */
|
|
status = ixEthAccMibIIStatsGetClear(portId, &retStats);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Initialize the ethernet MAC settings */
|
|
IxEthAccStatus
|
|
ixEthAccMacInit(IxEthAccPortId portId)
|
|
{
|
|
IX_OSAL_MBUF_POOL* portDisablePool;
|
|
UINT8 *data;
|
|
|
|
IX_ETH_ACC_VALIDATE_PORT_ID(portId);
|
|
|
|
if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
|
|
{
|
|
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Mac.\n",(INT32)portId,0,0,0,0,0);
|
|
return IX_ETH_ACC_SUCCESS ;
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].macInitialised == FALSE)
|
|
{
|
|
ixEthAccMacState[portId].fullDuplex = TRUE;
|
|
ixEthAccMacState[portId].rxFCSAppend = TRUE;
|
|
ixEthAccMacState[portId].txFCSAppend = TRUE;
|
|
ixEthAccMacState[portId].txPADAppend = TRUE;
|
|
ixEthAccMacState[portId].enabled = FALSE;
|
|
ixEthAccMacState[portId].promiscuous = TRUE;
|
|
ixEthAccMacState[portId].joinAll = FALSE;
|
|
ixEthAccMacState[portId].initDone = FALSE;
|
|
ixEthAccMacState[portId].macInitialised = TRUE;
|
|
|
|
/* initialize MIB stats mutexes */
|
|
ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock);
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_OSAL_WAIT_FOREVER);
|
|
|
|
ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsResetLock);
|
|
ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_OSAL_WAIT_FOREVER);
|
|
|
|
ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
|
|
|
|
ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
|
|
|
|
ixOsalMutexInit(&ixEthAccMacState[portId].npeLoopbackMessageLock);
|
|
|
|
ixEthAccMacState[portId].portDisableRxMbufPtr = NULL;
|
|
ixEthAccMacState[portId].portDisableTxMbufPtr = NULL;
|
|
|
|
portDisablePool = IX_OSAL_MBUF_POOL_INIT(2,
|
|
IX_ETHACC_RX_MBUF_MIN_SIZE,
|
|
"portDisable Pool");
|
|
|
|
IX_OSAL_ENSURE(portDisablePool != NULL, "Failed to initialize PortDisable pool");
|
|
|
|
ixEthAccMacState[portId].portDisableRxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
|
|
ixEthAccMacState[portId].portDisableTxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
|
|
|
|
IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableRxMbufPtr != NULL,
|
|
"Pool allocation failed");
|
|
IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableTxMbufPtr != NULL,
|
|
"Pool allocation failed");
|
|
/* fill the payload of the Rx mbuf used in portDisable */
|
|
IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableRxMbufPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
|
|
|
|
memset(IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableRxMbufPtr),
|
|
0xAA,
|
|
IX_ETHACC_RX_MBUF_MIN_SIZE);
|
|
|
|
/* fill the payload of the Tx mbuf used in portDisable (64 bytes) */
|
|
IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
|
|
IX_OSAL_MBUF_PKT_LEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
|
|
|
|
data = (UINT8 *) IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableTxMbufPtr);
|
|
memset(data, 0xBB, 64);
|
|
data[0] = 0x00; /* unicast destination MAC address */
|
|
data[6] = 0x00; /* unicast source MAC address */
|
|
data[12] = 0x08; /* typelength : IP frame */
|
|
data[13] = 0x00; /* typelength : IP frame */
|
|
|
|
IX_OSAL_CACHE_FLUSH(data, 64);
|
|
}
|
|
|
|
IX_OSAL_ASSERT (ixEthAccMacBase[portId] != 0);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_RESET);
|
|
|
|
ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_CORE_CNTRL,
|
|
IX_ETH_ACC_CORE_MDC_EN);
|
|
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH,
|
|
IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
|
|
|
|
ixEthAccMacStateUpdate(portId);
|
|
|
|
return IX_ETH_ACC_SUCCESS;
|
|
}
|
|
|
|
/* PRIVATE Functions*/
|
|
|
|
PRIVATE void
|
|
ixEthAccMacStateUpdate(IxEthAccPortId portId)
|
|
{
|
|
UINT32 regval;
|
|
|
|
if ( ixEthAccMacState[portId].enabled == FALSE )
|
|
{
|
|
/* Just disable both the transmitter and reciver in the MAC. */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN);
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN);
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].fullDuplex)
|
|
{
|
|
ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_FULL_DUPLEX);
|
|
}
|
|
else
|
|
{
|
|
ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_HALF_DUPLEX);
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].rxFCSAppend)
|
|
{
|
|
ixEthAccPortRxFrameAppendFCSEnablePriv (portId);
|
|
}
|
|
else
|
|
{
|
|
ixEthAccPortRxFrameAppendFCSDisablePriv (portId);
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].txFCSAppend)
|
|
{
|
|
ixEthAccPortTxFrameAppendFCSEnablePriv (portId);
|
|
}
|
|
else
|
|
{
|
|
ixEthAccPortTxFrameAppendFCSDisablePriv (portId);
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].txPADAppend)
|
|
{
|
|
ixEthAccPortTxFrameAppendPaddingEnablePriv (portId);
|
|
}
|
|
else
|
|
{
|
|
ixEthAccPortTxFrameAppendPaddingDisablePriv (portId);
|
|
}
|
|
|
|
if(ixEthAccMacState[portId].promiscuous)
|
|
{
|
|
ixEthAccPortPromiscuousModeSetPriv(portId);
|
|
}
|
|
else
|
|
{
|
|
ixEthAccPortPromiscuousModeClearPriv(portId);
|
|
}
|
|
|
|
if ( ixEthAccMacState[portId].enabled == TRUE )
|
|
{
|
|
/* Enable both the transmitter and reciver in the MAC. */
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval);
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_RX_CNTRL1,
|
|
regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
|
|
|
|
REG_READ(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval);
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_TX_CNTRL1,
|
|
regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
|
|
}
|
|
}
|
|
|
|
|
|
PRIVATE BOOL
|
|
ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
|
|
IxEthAccMacAddr *macAddr2)
|
|
{
|
|
UINT32 i;
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE; i++)
|
|
{
|
|
if(macAddr1->macAddress[i] != macAddr2->macAddress[i])
|
|
{
|
|
return FALSE;
|
|
}
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
PRIVATE void
|
|
ixEthAccMacPrint(IxEthAccMacAddr *m)
|
|
{
|
|
printf("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
|
|
m->macAddress[0], m->macAddress[1],
|
|
m->macAddress[2], m->macAddress[3],
|
|
m->macAddress[4], m->macAddress[5]);
|
|
}
|
|
|
|
/* Set the multicast address and address mask registers
|
|
*
|
|
* A bit in the address mask register must be set if
|
|
* all multicast addresses always have that bit set, or if
|
|
* all multicast addresses always have that bit cleared.
|
|
*
|
|
* A bit in the address register must be set if all multicast
|
|
* addresses have that bit set, otherwise, it should be cleared
|
|
*/
|
|
|
|
PRIVATE void
|
|
ixEthAccMulticastAddressSet(IxEthAccPortId portId)
|
|
{
|
|
UINT32 i;
|
|
UINT32 j;
|
|
IxEthAccMacAddr addressMask;
|
|
IxEthAccMacAddr address;
|
|
IxEthAccMacAddr alwaysClearBits;
|
|
IxEthAccMacAddr alwaysSetBits;
|
|
|
|
/* calculate alwaysClearBits and alwaysSetBits:
|
|
* alwaysClearBits is calculated by ORing all
|
|
* multicast addresses, those bits that are always
|
|
* clear are clear in the result
|
|
*
|
|
* alwaysSetBits is calculated by ANDing all
|
|
* multicast addresses, those bits that are always set
|
|
* are set in the result
|
|
*/
|
|
|
|
if (ixEthAccMacState[portId].promiscuous == TRUE)
|
|
{
|
|
/* Promiscuous Mode is set, and filtering
|
|
* allow all packets, and enable the mcast and
|
|
* bcast detection.
|
|
*/
|
|
memset(&addressMask.macAddress,
|
|
0,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
memset(&address.macAddress,
|
|
0,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
}
|
|
else
|
|
{
|
|
if(ixEthAccMacState[portId].joinAll == TRUE)
|
|
{
|
|
/* Join all is set. The mask and address are
|
|
* the multicast settings.
|
|
*/
|
|
IxEthAccMacAddr macAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
|
|
|
|
memcpy(addressMask.macAddress,
|
|
macAddr.macAddress,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
memcpy(address.macAddress,
|
|
macAddr.macAddress,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
}
|
|
else if(ixEthAccMacState[portId].mcastAddrIndex == 0)
|
|
{
|
|
/* No entry in the filtering database,
|
|
* Promiscuous Mode is cleared, Broadcast filtering
|
|
* is configured.
|
|
*/
|
|
memset(addressMask.macAddress,
|
|
IX_ETH_ACC_MAC_ALL_BITS_SET,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
memset(address.macAddress,
|
|
IX_ETH_ACC_MAC_ALL_BITS_SET,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
}
|
|
else
|
|
{
|
|
/* build a mask and an address which mix all entreis
|
|
* from the list of multicast addresses
|
|
*/
|
|
memset(alwaysClearBits.macAddress,
|
|
0,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
memset(alwaysSetBits.macAddress,
|
|
IX_ETH_ACC_MAC_ALL_BITS_SET,
|
|
IX_IEEE803_MAC_ADDRESS_SIZE);
|
|
|
|
for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
|
|
{
|
|
for(j=0;j<IX_IEEE803_MAC_ADDRESS_SIZE;j++)
|
|
{
|
|
alwaysClearBits.macAddress[j] |=
|
|
ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
|
|
alwaysSetBits.macAddress[j] &=
|
|
ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
|
|
}
|
|
}
|
|
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
addressMask.macAddress[i] = alwaysSetBits.macAddress[i]
|
|
| ~alwaysClearBits.macAddress[i];
|
|
address.macAddress[i] = alwaysSetBits.macAddress[i];
|
|
}
|
|
}
|
|
}
|
|
|
|
/*write the new addr filtering to h/w*/
|
|
for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
|
|
{
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_ADDR_MASK_1+i*sizeof(UINT32),
|
|
addressMask.macAddress[i]);
|
|
REG_WRITE(ixEthAccMacBase[portId],
|
|
IX_ETH_ACC_MAC_ADDR_1+i*sizeof(UINT32),
|
|
address.macAddress[i]);
|
|
}
|
|
}
|