u-boot/drivers/crypto/fsl/jr.h
Gaurav Jain 4556cf8271 crypto/fsl: Add support for CAAM Job ring driver model
added device tree support for job ring driver.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-12 11:18:34 +02:00

133 lines
3.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2008-2014 Freescale Semiconductor, Inc.
* Copyright 2021 NXP
*
*/
#ifndef __JR_H
#define __JR_H
#include <linux/compiler.h>
#include "fsl_sec.h"
#include "type.h"
#include <misc.h>
#define JR_SIZE 4
/* Timeout currently defined as 10 sec */
#define CONFIG_USEC_DEQ_TIMEOUT 10000000U
#define DEFAULT_JR_ID 0
#define DEFAULT_JR_LIODN 0
#define DEFAULT_IRQ 0 /* Interrupts not to be configured */
#define MCFGR_SWRST ((uint32_t)(1)<<31) /* Software Reset */
#define MCFGR_DMA_RST ((uint32_t)(1)<<28) /* DMA Reset */
#define MCFGR_PS_SHIFT 16
#define MCFGR_AWCACHE_SHIFT 8
#define MCFGR_AWCACHE_MASK (0xf << MCFGR_AWCACHE_SHIFT)
#define MCFGR_ARCACHE_SHIFT 12
#define MCFGR_ARCACHE_MASK (0xf << MCFGR_ARCACHE_SHIFT)
#define JR_INTMASK 0x00000001
#define JRCR_RESET 0x01
#define JRINT_ERR_HALT_INPROGRESS 0x4
#define JRINT_ERR_HALT_MASK 0xc
#define JRNSLIODN_SHIFT 16
#define JRNSLIODN_MASK 0x0fff0000
#define JRSLIODN_SHIFT 0
#define JRSLIODN_MASK 0x00000fff
#define JRDID_MS_PRIM_DID BIT(0)
#define JRDID_MS_PRIM_TZ BIT(4)
#define JRDID_MS_TZ_OWN BIT(15)
#define JQ_DEQ_ERR (-1)
#define JQ_DEQ_TO_ERR (-2)
#define JQ_ENQ_ERR (-3)
#define RNG4_MAX_HANDLES 2
enum {
/* Run caam jobring descriptor(in buf) */
CAAM_JR_RUN_DESC,
};
struct op_ring {
caam_dma_addr_t desc;
uint32_t status;
} __packed;
struct jr_info {
void (*callback)(uint32_t status, void *arg);
caam_dma_addr_t desc_phys_addr;
uint32_t desc_len;
uint32_t op_done;
void *arg;
};
struct jobring {
int jq_id;
int irq;
int liodn;
/* Head is the index where software would enq the descriptor in
* the i/p ring
*/
int head;
/* Tail index would be used by s/w ehile enqueuing to determine if
* there is any space left in the s/w maintained i/p rings
*/
/* Also in case of deq tail will be incremented only in case of
* in-order job completion
*/
int tail;
/* Read index of the output ring. It may not match with tail in case
* of out of order completetion
*/
int read_idx;
/* Write index to input ring. Would be always equal to head */
int write_idx;
/* Size of the rings. */
int size;
/* Op ring size aligned to cache line size */
int op_size;
/* The ip and output rings have to be accessed by SEC. So the
* pointers will ahve to point to the housekeeping region provided
* by SEC
*/
/*Circular Ring of i/p descriptors */
caam_dma_addr_t *input_ring;
/* Circular Ring of o/p descriptors */
/* Circula Ring containing info regarding descriptors in i/p
* and o/p ring
*/
/* This ring can be on the stack */
struct jr_info info[JR_SIZE];
struct op_ring *output_ring;
/* Offset in CCSR to the SEC engine to which this JR belongs */
uint32_t sec_offset;
};
struct result {
int done;
uint32_t status;
};
/*
* struct caam_regs - CAAM initialization register interface
*
* Interface to caam memory map, jobring register, jobring storage.
*/
struct caam_regs {
ccsr_sec_t *sec; /*caam initialization registers*/
struct jr_regs *regs; /*jobring configuration registers*/
u8 jrid; /*id to identify a jobring*/
/*Private sub-storage for a single JobR*/
struct jobring jr[CONFIG_SYS_FSL_MAX_NUM_OF_SEC];
};
void caam_jr_strstatus(u32 status);
int run_descriptor_jr(uint32_t *desc);
#endif