mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
f3c89d9228
The device id makes u-boot think that this chip needs cfi_reverse_geometry(), which is not the case. Add it to jedec_flash, so it is handled properly. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
493 lines
11 KiB
C
493 lines
11 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Michael Schwingen, <michael@schwingen.org>
|
|
*
|
|
* based in great part on jedec_probe.c from linux kernel:
|
|
* (C) 2000 Red Hat. GPL'd.
|
|
* Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* The DEBUG define must be before common to enable debugging */
|
|
/*#define DEBUG*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <environment.h>
|
|
|
|
#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY
|
|
|
|
/* AMD */
|
|
#define AM29DL800BB 0x22CB
|
|
#define AM29DL800BT 0x224A
|
|
|
|
#define AM29F400BB 0x22AB
|
|
#define AM29F800BB 0x2258
|
|
#define AM29F800BT 0x22D6
|
|
#define AM29LV400BB 0x22BA
|
|
#define AM29LV400BT 0x22B9
|
|
#define AM29LV800BB 0x225B
|
|
#define AM29LV800BT 0x22DA
|
|
#define AM29LV160DT 0x22C4
|
|
#define AM29LV160DB 0x2249
|
|
#define AM29F017D 0x003D
|
|
#define AM29F016D 0x00AD
|
|
#define AM29F080 0x00D5
|
|
#define AM29F040 0x00A4
|
|
#define AM29LV040B 0x004F
|
|
#define AM29F032B 0x0041
|
|
#define AM29F002T 0x00B0
|
|
|
|
/* SST */
|
|
#define SST39LF800 0x2781
|
|
#define SST39LF160 0x2782
|
|
#define SST39VF1601 0x234b
|
|
#define SST39LF512 0x00D4
|
|
#define SST39LF010 0x00D5
|
|
#define SST39LF020 0x00D6
|
|
#define SST39LF040 0x00D7
|
|
#define SST39SF010A 0x00B5
|
|
#define SST39SF020A 0x00B6
|
|
|
|
/* STM */
|
|
#define STM29F400BB 0x00D6
|
|
|
|
/* MXIC */
|
|
#define MX29LV040 0x004F
|
|
|
|
/* WINBOND */
|
|
#define W39L040A 0x00D6
|
|
|
|
/* AMIC */
|
|
#define A29L040 0x0092
|
|
|
|
/* EON */
|
|
#define EN29LV040A 0x004F
|
|
|
|
/*
|
|
* Unlock address sets for AMD command sets.
|
|
* Intel command sets use the MTD_UADDR_UNNECESSARY.
|
|
* Each identifier, except MTD_UADDR_UNNECESSARY, and
|
|
* MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
|
|
* MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
|
|
* initialization need not require initializing all of the
|
|
* unlock addresses for all bit widths.
|
|
*/
|
|
enum uaddr {
|
|
MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */
|
|
MTD_UADDR_0x0555_0x02AA,
|
|
MTD_UADDR_0x0555_0x0AAA,
|
|
MTD_UADDR_0x5555_0x2AAA,
|
|
MTD_UADDR_0x0AAA_0x0555,
|
|
MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */
|
|
MTD_UADDR_UNNECESSARY, /* Does not require any address */
|
|
};
|
|
|
|
|
|
struct unlock_addr {
|
|
u32 addr1;
|
|
u32 addr2;
|
|
};
|
|
|
|
|
|
/*
|
|
* I don't like the fact that the first entry in unlock_addrs[]
|
|
* exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
|
|
* should not be used. The problem is that structures with
|
|
* initializers have extra fields initialized to 0. It is _very_
|
|
* desireable to have the unlock address entries for unsupported
|
|
* data widths automatically initialized - that means that
|
|
* MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
|
|
* must go unused.
|
|
*/
|
|
static const struct unlock_addr unlock_addrs[] = {
|
|
[MTD_UADDR_NOT_SUPPORTED] = {
|
|
.addr1 = 0xffff,
|
|
.addr2 = 0xffff
|
|
},
|
|
|
|
[MTD_UADDR_0x0555_0x02AA] = {
|
|
.addr1 = 0x0555,
|
|
.addr2 = 0x02aa
|
|
},
|
|
|
|
[MTD_UADDR_0x0555_0x0AAA] = {
|
|
.addr1 = 0x0555,
|
|
.addr2 = 0x0aaa
|
|
},
|
|
|
|
[MTD_UADDR_0x5555_0x2AAA] = {
|
|
.addr1 = 0x5555,
|
|
.addr2 = 0x2aaa
|
|
},
|
|
|
|
[MTD_UADDR_0x0AAA_0x0555] = {
|
|
.addr1 = 0x0AAA,
|
|
.addr2 = 0x0555
|
|
},
|
|
|
|
[MTD_UADDR_DONT_CARE] = {
|
|
.addr1 = 0x0000, /* Doesn't matter which address */
|
|
.addr2 = 0x0000 /* is used - must be last entry */
|
|
},
|
|
|
|
[MTD_UADDR_UNNECESSARY] = {
|
|
.addr1 = 0x0000,
|
|
.addr2 = 0x0000
|
|
}
|
|
};
|
|
|
|
|
|
struct amd_flash_info {
|
|
const __u16 mfr_id;
|
|
const __u16 dev_id;
|
|
const char *name;
|
|
const int DevSize;
|
|
const int NumEraseRegions;
|
|
const int CmdSet;
|
|
const __u8 uaddr[4]; /* unlock addrs for 8, 16, 32, 64 */
|
|
const ulong regions[6];
|
|
};
|
|
|
|
#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
|
|
|
|
#define SIZE_64KiB 16
|
|
#define SIZE_128KiB 17
|
|
#define SIZE_256KiB 18
|
|
#define SIZE_512KiB 19
|
|
#define SIZE_1MiB 20
|
|
#define SIZE_2MiB 21
|
|
#define SIZE_4MiB 22
|
|
#define SIZE_8MiB 23
|
|
|
|
static const struct amd_flash_info jedec_table[] = {
|
|
#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
|
|
{
|
|
.mfr_id = (u16)SST_MANUFACT,
|
|
.dev_id = SST39LF020,
|
|
.name = "SST 39LF020",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
|
|
},
|
|
.DevSize = SIZE_256KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x01000,64),
|
|
}
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
|
|
{
|
|
.mfr_id = (u16)AMD_MANUFACT,
|
|
.dev_id = AM29LV040B,
|
|
.name = "AMD AM29LV040B",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000,8),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)SST_MANUFACT,
|
|
.dev_id = SST39LF040,
|
|
.name = "SST 39LF040",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x01000,128),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)STM_MANUFACT,
|
|
.dev_id = STM_ID_M29W040B,
|
|
.name = "ST Micro M29W040B",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000,8),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)MX_MANUFACT,
|
|
.dev_id = MX29LV040,
|
|
.name = "MXIC MX29LV040",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 8),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)WINB_MANUFACT,
|
|
.dev_id = W39L040A,
|
|
.name = "WINBOND W39L040A",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 8),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)AMIC_MANUFACT,
|
|
.dev_id = A29L040,
|
|
.name = "AMIC A29L040",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 8),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)EON_MANUFACT,
|
|
.dev_id = EN29LV040A,
|
|
.name = "EON EN29LV040A",
|
|
.uaddr = {
|
|
[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = P_ID_AMD_STD,
|
|
.NumEraseRegions= 1,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 8),
|
|
}
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
|
|
{
|
|
.mfr_id = (u16)AMD_MANUFACT,
|
|
.dev_id = AM29F400BB,
|
|
.name = "AMD AM29F400BB",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x04000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x10000, 7),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)AMD_MANUFACT,
|
|
.dev_id = AM29LV400BB,
|
|
.name = "AMD AM29LV400BB",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x04000,1),
|
|
ERASEINFO(0x02000,2),
|
|
ERASEINFO(0x08000,1),
|
|
ERASEINFO(0x10000,7),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)AMD_MANUFACT,
|
|
.dev_id = AM29LV800BB,
|
|
.name = "AMD AM29LV800BB",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_1MiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x04000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x10000, 15),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)AMD_MANUFACT,
|
|
.dev_id = AM29LV800BT,
|
|
.name = "AMD AM29LV800BT",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_1MiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 15),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x04000, 1),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)MX_MANUFACT,
|
|
.dev_id = AM29LV800BT,
|
|
.name = "MXIC MX29LV800BT",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_1MiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 15),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x04000, 1),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)EON_ALT_MANU,
|
|
.dev_id = AM29LV800BT,
|
|
.name = "EON EN29LV800BT",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_1MiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions= 4,
|
|
.regions = {
|
|
ERASEINFO(0x10000, 15),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x04000, 1),
|
|
}
|
|
},
|
|
{
|
|
.mfr_id = (u16)STM_MANUFACT,
|
|
.dev_id = STM29F400BB,
|
|
.name = "ST Micro M29F400BB",
|
|
.uaddr = {
|
|
[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
|
|
},
|
|
.DevSize = SIZE_512KiB,
|
|
.CmdSet = CFI_CMDSET_AMD_LEGACY,
|
|
.NumEraseRegions = 4,
|
|
.regions = {
|
|
ERASEINFO(0x04000, 1),
|
|
ERASEINFO(0x02000, 2),
|
|
ERASEINFO(0x08000, 1),
|
|
ERASEINFO(0x10000, 7),
|
|
}
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
|
|
{
|
|
int i,j;
|
|
int sect_cnt;
|
|
int size_ratio;
|
|
int total_size;
|
|
enum uaddr uaddr_idx;
|
|
|
|
size_ratio = info->portwidth / info->chipwidth;
|
|
|
|
debug("Found JEDEC Flash: %s\n", jedec_entry->name);
|
|
info->vendor = jedec_entry->CmdSet;
|
|
/* Todo: do we need device-specific timeouts? */
|
|
info->erase_blk_tout = 30000;
|
|
info->buffer_write_tout = 1000;
|
|
info->write_tout = 100;
|
|
info->name = jedec_entry->name;
|
|
|
|
/* copy unlock addresses from device table to CFI info struct. This
|
|
is just here because the addresses are in the table anyway - if
|
|
the flash is not detected due to wrong unlock addresses,
|
|
flash_detect_legacy would have to try all of them before we even
|
|
get here. */
|
|
switch(info->chipwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
uaddr_idx = jedec_entry->uaddr[0];
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
uaddr_idx = jedec_entry->uaddr[1];
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
uaddr_idx = jedec_entry->uaddr[2];
|
|
break;
|
|
default:
|
|
uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
|
|
break;
|
|
}
|
|
|
|
debug("unlock address index %d\n", uaddr_idx);
|
|
info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
|
|
info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
|
|
debug("unlock addresses are 0x%lx/0x%lx\n",
|
|
info->addr_unlock1, info->addr_unlock2);
|
|
|
|
sect_cnt = 0;
|
|
total_size = 0;
|
|
for (i = 0; i < jedec_entry->NumEraseRegions; i++) {
|
|
ulong erase_region_size = jedec_entry->regions[i] >> 8;
|
|
ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1;
|
|
|
|
total_size += erase_region_size * erase_region_count;
|
|
debug("erase_region_count = %ld erase_region_size = %ld\n",
|
|
erase_region_count, erase_region_size);
|
|
for (j = 0; j < erase_region_count; j++) {
|
|
if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
|
|
printf("ERROR: too many flash sectors\n");
|
|
break;
|
|
}
|
|
info->start[sect_cnt] = base;
|
|
base += (erase_region_size * size_ratio);
|
|
sect_cnt++;
|
|
}
|
|
}
|
|
info->sector_count = sect_cnt;
|
|
info->size = total_size * size_ratio;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* match jedec ids against table. If a match is found, fill flash_info entry
|
|
*/
|
|
int jedec_flash_match(flash_info_t *info, ulong base)
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
ulong mask = 0xFFFF;
|
|
if (info->chipwidth == 1)
|
|
mask = 0xFF;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
|
|
if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) &&
|
|
(jedec_table[i].dev_id & mask) == (info->device_id & mask)) {
|
|
fill_info(info, &jedec_table[i], base);
|
|
ret = 1;
|
|
break;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|