u-boot/configs/beelink-gtkingpro_defconfig
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

74 lines
1.9 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_BOARD="beelink-s922x"
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro"
CONFIG_MESON_G12A=y
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" beelink"
CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
CONFIG_REMAKE_ELF=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MESON_G12A=y
CONFIG_MESON_G12A_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_EE_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y