mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
1f065e8fea
The whole driver logic is taken from Linux kernel but only set/get/reset functions are implemented. When device is power off RTC is power out of battery. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
158 lines
3.8 KiB
C
158 lines
3.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2021, Xilinx, Inc.
|
|
*/
|
|
|
|
#define LOG_CATEGORY UCLASS_RTC
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <rtc.h>
|
|
#include <asm/io.h>
|
|
|
|
/* RTC Registers */
|
|
#define RTC_SET_TM_WR 0x00
|
|
#define RTC_SET_TM_RD 0x04
|
|
#define RTC_CALIB_WR 0x08
|
|
#define RTC_CUR_TM 0x10
|
|
#define RTC_INT_STS 0x20
|
|
#define RTC_CTRL 0x40
|
|
|
|
#define RTC_INT_SEC BIT(0)
|
|
#define RTC_BATT_EN BIT(31)
|
|
#define RTC_CALIB_DEF 0x198233
|
|
#define RTC_CALIB_MASK 0x1FFFFF
|
|
|
|
struct zynqmp_rtc_priv {
|
|
fdt_addr_t base;
|
|
unsigned int calibval;
|
|
};
|
|
|
|
static int zynqmp_rtc_get(struct udevice *dev, struct rtc_time *tm)
|
|
{
|
|
struct zynqmp_rtc_priv *priv = dev_get_priv(dev);
|
|
u32 status;
|
|
unsigned long read_time;
|
|
|
|
status = readl(priv->base + RTC_INT_STS);
|
|
|
|
if (status & RTC_INT_SEC) {
|
|
/*
|
|
* RTC has updated the CURRENT_TIME with the time written into
|
|
* SET_TIME_WRITE register.
|
|
*/
|
|
read_time = readl(priv->base + RTC_CUR_TM);
|
|
} else {
|
|
/*
|
|
* Time written in SET_TIME_WRITE has not yet updated into
|
|
* the seconds read register, so read the time from the
|
|
* SET_TIME_WRITE instead of CURRENT_TIME register.
|
|
* Since we add +1 sec while writing, we need to -1 sec while
|
|
* reading.
|
|
*/
|
|
read_time = readl(priv->base + RTC_SET_TM_RD) - 1;
|
|
}
|
|
|
|
rtc_to_tm(read_time, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_rtc_set(struct udevice *dev, const struct rtc_time *tm)
|
|
{
|
|
struct zynqmp_rtc_priv *priv = dev_get_priv(dev);
|
|
unsigned long new_time = 0;
|
|
|
|
if (tm)
|
|
/*
|
|
* The value written will be updated after 1 sec into the
|
|
* seconds read register, so we need to program time +1 sec
|
|
* to get the correct time on read.
|
|
*/
|
|
new_time = rtc_mktime(tm) + 1;
|
|
|
|
/*
|
|
* Writing into calibration register will clear the Tick Counter and
|
|
* force the next second to be signaled exactly in 1 second period
|
|
*/
|
|
priv->calibval &= RTC_CALIB_MASK;
|
|
writel(priv->calibval, (priv->base + RTC_CALIB_WR));
|
|
|
|
writel(new_time, priv->base + RTC_SET_TM_WR);
|
|
|
|
/*
|
|
* Clear the rtc interrupt status register after setting the
|
|
* time. During a read_time function, the code should read the
|
|
* RTC_INT_STATUS register and if bit 0 is still 0, it means
|
|
* that one second has not elapsed yet since RTC was set and
|
|
* the current time should be read from SET_TIME_READ register;
|
|
* otherwise, CURRENT_TIME register is read to report the time
|
|
*/
|
|
writel(RTC_INT_SEC, priv->base + RTC_INT_STS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_rtc_reset(struct udevice *dev)
|
|
{
|
|
return zynqmp_rtc_set(dev, NULL);
|
|
}
|
|
|
|
static int zynqmp_rtc_init(struct udevice *dev)
|
|
{
|
|
struct zynqmp_rtc_priv *priv = dev_get_priv(dev);
|
|
u32 rtc_ctrl;
|
|
|
|
/* Enable RTC switch to battery when VCC_PSAUX is not available */
|
|
rtc_ctrl = readl(priv->base + RTC_CTRL);
|
|
rtc_ctrl |= RTC_BATT_EN;
|
|
writel(rtc_ctrl, priv->base + RTC_CTRL);
|
|
|
|
/*
|
|
* Based on crystal freq of 33.330 KHz
|
|
* set the seconds counter and enable, set fractions counter
|
|
* to default value suggested as per design spec
|
|
* to correct RTC delay in frequency over period of time.
|
|
*/
|
|
priv->calibval &= RTC_CALIB_MASK;
|
|
writel(priv->calibval, (priv->base + RTC_CALIB_WR));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_rtc_probe(struct udevice *dev)
|
|
{
|
|
struct zynqmp_rtc_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->base = dev_read_addr(dev);
|
|
if (priv->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
priv->calibval = dev_read_u32_default(dev, "calibration",
|
|
RTC_CALIB_DEF);
|
|
|
|
ret = zynqmp_rtc_init(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rtc_ops zynqmp_rtc_ops = {
|
|
.get = zynqmp_rtc_get,
|
|
.set = zynqmp_rtc_set,
|
|
.reset = zynqmp_rtc_reset,
|
|
};
|
|
|
|
static const struct udevice_id zynqmp_rtc_ids[] = {
|
|
{ .compatible = "xlnx,zynqmp-rtc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rtc_zynqmp) = {
|
|
.name = "rtc-zynqmp",
|
|
.id = UCLASS_RTC,
|
|
.probe = zynqmp_rtc_probe,
|
|
.of_match = zynqmp_rtc_ids,
|
|
.ops = &zynqmp_rtc_ops,
|
|
.priv_auto = sizeof(struct zynqmp_rtc_priv),
|
|
};
|