mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
14c251ffe1
At present we have SPL_POWER but not piain POWER. This works because there is a special build rule in Makefile that always includes the drivers/power directory. It is better to have all driver directories included by drivers/Makefile and there is already a rule in there for this purpose. It just needs a Kconfig for U-Boot proper, so add one. Update the pmic.h header file so that it defines the old pmic struct always, when driver model is not in use. That will avoid build errors for boards which enable POWER but not DM_PMIC. Enable this option always. That seems strange at first sight, but it actually but mimics the current Makefile behaviour. Once we can drop the old PMICs it should be easy enough to rename DM_PMIC to POWWER, or something similar. Signed-off-by: Simon Glass <sjg@chromium.org>
449 lines
15 KiB
Text
449 lines
15 KiB
Text
menuconfig POWER
|
|
bool "Power"
|
|
default y
|
|
help
|
|
Enable support for power control in U-Boot. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in U-Boot to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
if POWER
|
|
|
|
config POWER_LEGACY
|
|
bool "Legacy power support"
|
|
help
|
|
Note: This is a legacy option. Use DM_PMIC instead.
|
|
|
|
Enable support for power control in U-Boot. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in U-Boot to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
config SPL_POWER_LEGACY
|
|
bool "Legacy power support in SPL"
|
|
default y if POWER_LEGACY
|
|
help
|
|
Note: This is a legacy option. Use SPL_DM_PMIC instead.
|
|
|
|
Enable support for power control in SPL. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in SPL to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
source "drivers/power/acpi_pmc/Kconfig"
|
|
|
|
source "drivers/power/domain/Kconfig"
|
|
|
|
source "drivers/power/pmic/Kconfig"
|
|
|
|
source "drivers/power/regulator/Kconfig"
|
|
|
|
choice
|
|
prompt "Select Sunxi PMIC Variant"
|
|
depends on ARCH_SUNXI
|
|
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
|
|
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
|
|
default AXP305_POWER if MACH_SUN50I_H616
|
|
default AXP818_POWER if MACH_SUN8I_A83T
|
|
default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
|
|
|
|
config SUNXI_NO_PMIC
|
|
bool "board without a pmic"
|
|
---help---
|
|
Select this for boards which do not use a PMIC.
|
|
|
|
config AXP152_POWER
|
|
bool "axp152 pmic support"
|
|
depends on MACH_SUN5I
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp152 pmic found on most
|
|
A10s boards.
|
|
|
|
config AXP209_POWER
|
|
bool "axp209 pmic support"
|
|
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp209 pmic found on most
|
|
A10, A13 and A20 boards.
|
|
|
|
config AXP221_POWER
|
|
bool "axp221 / axp223 pmic support"
|
|
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp221/axp223 pmic found on most
|
|
A23 and A31 boards.
|
|
|
|
config AXP305_POWER
|
|
bool "axp305 pmic support"
|
|
depends on MACH_SUN50I_H616
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp305 pmic found on most
|
|
H616 boards.
|
|
|
|
config AXP809_POWER
|
|
bool "axp809 pmic support"
|
|
depends on MACH_SUN9I
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Say y here to enable support for the axp809 pmic found on A80 boards.
|
|
|
|
config AXP818_POWER
|
|
bool "axp818 pmic support"
|
|
depends on MACH_SUN8I_A83T
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Say y here to enable support for the axp818 pmic found on
|
|
A83T dev board.
|
|
|
|
config SY8106A_POWER
|
|
bool "SY8106A pmic support"
|
|
depends on MACH_SUNXI_H3_H5
|
|
---help---
|
|
Select this to enable support for the SY8106A pmic found on some
|
|
H3 boards.
|
|
|
|
endchoice
|
|
|
|
config AXP_DCDC1_VOLT
|
|
int "axp pmic dcdc1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3300 if AXP818_POWER || MACH_SUN8I_R40
|
|
default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
|
|
disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
|
|
generic 3.3V IO voltage for external devices like the lcd-panal and
|
|
sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
|
|
save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
|
|
dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
|
|
powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG.
|
|
|
|
config AXP_DCDC2_VOLT
|
|
int "axp pmic dcdc2 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 900 if AXP818_POWER
|
|
default 1400 if AXP152_POWER || AXP209_POWER
|
|
default 1200 if MACH_SUN6I
|
|
default 1100 if MACH_SUN8I
|
|
default 0 if MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
|
|
disable dcdc2.
|
|
On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
|
|
On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
|
|
On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
|
|
On A80 boards dcdc2 powers the GPU and can be left off.
|
|
On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
|
|
On R40 boards dcdc2 is VDD-CPU and should be 1.1V
|
|
|
|
config AXP_DCDC3_VOLT
|
|
int "axp pmic dcdc3 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 900 if AXP809_POWER || AXP818_POWER
|
|
default 1500 if AXP152_POWER
|
|
default 1250 if AXP209_POWER
|
|
default 1100 if MACH_SUN8I_R40
|
|
default 1200 if MACH_SUN6I || MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
|
|
disable dcdc3.
|
|
On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
|
|
should be 1.25V.
|
|
On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
|
|
On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
|
|
On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
|
|
On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
|
|
On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
|
|
|
|
config AXP_DCDC4_VOLT
|
|
int "axp pmic dcdc4 voltage"
|
|
depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
|
|
default 1250 if AXP152_POWER
|
|
default 1200 if MACH_SUN6I
|
|
default 0 if MACH_SUN8I
|
|
default 900 if MACH_SUN9I
|
|
default 1500 if AXP305_POWER
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
|
|
disable dcdc4.
|
|
On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
|
|
On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
|
|
On A23 / A33 boards dcdc4 is unused and should be disabled.
|
|
On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
|
|
On A83T boards dcdc4 is used for VDD-GPU.
|
|
On H616 boards dcdcd is used for VCC-DRAM.
|
|
|
|
config AXP_DCDC5_VOLT
|
|
int "axp pmic dcdc5 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
|
|
disable dcdc5.
|
|
On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
|
|
should be 1.5V, 1.35V if DDR3L is used.
|
|
|
|
config AXP_ALDO1_VOLT
|
|
int "axp pmic (a)ldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0 if MACH_SUN6I || MACH_SUN8I_R40
|
|
default 1800 if MACH_SUN8I_A83T
|
|
default 3000 if MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
|
|
disable aldo1.
|
|
On A31 boards aldo1 is often used to power the wifi module.
|
|
On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
|
|
On A80 boards aldo1 powers the USB hosts and should be 3.0V.
|
|
On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
|
|
should be 1.8V.
|
|
|
|
config AXP_ALDO2_VOLT
|
|
int "axp pmic (a)ldo2 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if AXP152_POWER || AXP209_POWER
|
|
default 0 if MACH_SUN6I || MACH_SUN9I
|
|
default 1800 if MACH_SUN8I_A83T
|
|
default 2500 if MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
|
|
disable aldo2.
|
|
On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
|
|
On A31 boards aldo2 is typically unused and should be disabled.
|
|
On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
|
|
On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
|
|
On A80 boards aldo2 powers PB pingroup and camera IO and can be left off.
|
|
On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
|
|
LPDDR2, and the codec. It should be 1.8V.
|
|
|
|
config AXP_ALDO3_VOLT
|
|
int "axp pmic (a)ldo3 voltage"
|
|
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0 if AXP209_POWER || MACH_SUN9I
|
|
default 3000 if MACH_SUN6I || MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
|
|
disable aldo3.
|
|
On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
|
|
On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
|
|
be 3.0V.
|
|
On A80 boards aldo3 is normally not used.
|
|
On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
|
|
3.0V.
|
|
|
|
choice
|
|
prompt "axp pmic (a)ldo3 voltage rate control"
|
|
depends on AXP209_POWER
|
|
default AXP_ALDO3_VOLT_SLOPE_NONE
|
|
---help---
|
|
The AXP can slowly ramp up voltage to reduce the inrush current when
|
|
changing voltages.
|
|
Note, this does not apply when enabling/disabling LDO3. See
|
|
"axp pmic (a)ldo3 inrush quirk" below to enable a slew rate to limit
|
|
inrush current on broken board designs.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_NONE
|
|
bool "No voltage slope"
|
|
---help---
|
|
Tries to reach the next voltage setting near instantaneously. Measurements
|
|
indicate that this is about 0.0167 V/uS.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_16
|
|
bool "1.6 mV per uS"
|
|
---help---
|
|
Increases the voltage by 1.6 mV per uS until the final voltage has
|
|
been reached. Note that the scaling is in 25 mV steps and thus
|
|
the slew rate in reality is about 25 mV/31.250 uS.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_08
|
|
bool "0.8 mV per uS"
|
|
---help---
|
|
Increases the voltage by 0.8 mV per uS until the final voltage has
|
|
been reached. Note that the scaling is in 25 mV steps however and thus
|
|
the slew rate in reality is about 25 mV/15.625 uS.
|
|
This is the slowest supported rate.
|
|
|
|
endchoice
|
|
|
|
config AXP_ALDO3_INRUSH_QUIRK
|
|
bool "axp pmic (a)ldo3 inrush quirk"
|
|
depends on AXP209_POWER
|
|
---help---
|
|
The reference design denotes a value of 4.7 uF for the output capacitor
|
|
of LDO3. Some boards have too high capacitance causing an inrush current
|
|
and resulting an AXP209 shutdown.
|
|
|
|
config AXP_ALDO4_VOLT
|
|
int "axp pmic (a)ldo4 voltage"
|
|
depends on AXP209_POWER
|
|
default 0 if AXP209_POWER
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
|
|
disable aldo4.
|
|
On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
|
|
|
|
config AXP_DLDO1_VOLT
|
|
int "axp pmic dldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
|
|
disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
|
|
to power the ethernet phy. On A23, A33 and A80 boards this is often
|
|
used to power the wifi.
|
|
|
|
config AXP_DLDO2_VOLT
|
|
int "axp pmic dldo2 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if MACH_SUN9I
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
|
|
disable dldo2.
|
|
On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
|
|
|
|
config AXP_DLDO3_VOLT
|
|
int "axp pmic dldo3 voltage"
|
|
depends on AXP221_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
|
|
disable dldo3.
|
|
|
|
config AXP_DLDO4_VOLT
|
|
int "axp pmic dldo4 voltage"
|
|
depends on AXP221_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
|
|
disable dldo4.
|
|
|
|
config AXP_ELDO1_VOLT
|
|
int "axp pmic eldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
|
|
disable eldo1.
|
|
|
|
config AXP_ELDO2_VOLT
|
|
int "axp pmic eldo2 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
|
|
disable eldo2.
|
|
|
|
config AXP_ELDO3_VOLT
|
|
int "axp pmic eldo3 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if MACH_SUN9I
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
|
|
disable eldo3. On some A31(s) tablets it might be used to supply
|
|
1.2V for the SSD2828 chip (converter of parallel LCD interface
|
|
into MIPI DSI).
|
|
On A80 boards it powers the PM pingroup and should be 3.0V.
|
|
|
|
config AXP_FLDO1_VOLT
|
|
int "axp pmic fldo1 voltage"
|
|
depends on AXP818_POWER
|
|
default 0 if MACH_SUN8I_A83T
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
|
|
disable fldo1.
|
|
On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
|
|
used.
|
|
|
|
config AXP_FLDO2_VOLT
|
|
int "axp pmic fldo2 voltage"
|
|
depends on AXP818_POWER
|
|
default 900 if MACH_SUN8I_A83T
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
|
|
disable fldo2.
|
|
On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
|
|
|
|
config AXP_FLDO3_VOLT
|
|
int "axp pmic fldo3 voltage"
|
|
depends on AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
|
|
disable fldo3.
|
|
|
|
config AXP_SW_ON
|
|
bool "axp pmic sw on"
|
|
depends on AXP809_POWER || AXP818_POWER
|
|
---help---
|
|
Enable to turn on axp pmic sw.
|
|
|
|
config SY8106A_VOUT1_VOLT
|
|
int "SY8106A pmic VOUT1 voltage"
|
|
depends on SY8106A_POWER
|
|
default 1200
|
|
---help---
|
|
Set the voltage (mV) to program the SY8106A pmic VOUT1. This
|
|
is typically used to power the VDD-CPU and should be 1200mV.
|
|
Values can range from 680mV till 1950mV.
|
|
|
|
config TWL4030_POWER
|
|
depends on OMAP34XX
|
|
bool "Enable driver for TI TWL4030 power management chip"
|
|
imply CMD_POWEROFF
|
|
---help---
|
|
The TWL4030 in a combination audio CODEC/power management with
|
|
GPIO and it is commonly used with the OMAP3 family of processors
|
|
|
|
config POWER_MT6323
|
|
bool "Poweroff driver for mediatek mt6323"
|
|
select CMD_POWEROFF
|
|
help
|
|
This adds poweroff driver for mt6323
|
|
this pmic is used on mt7623 / Bananapi R2
|
|
|
|
config POWER_I2C
|
|
bool "I2C-based power control for legacy power"
|
|
depends on POWER_LEGACY
|
|
help
|
|
Enable this to use the I2C driver designed for the legacy PMIC
|
|
interface.
|
|
|
|
Not to be used for new designs and existing ones should be moved to
|
|
the new PMIC interface based on driver model.
|
|
|
|
config SPL_POWER_I2C
|
|
bool "I2C-based power control for legacy power"
|
|
depends on SPL_POWER_LEGACY
|
|
default y if POWER_I2C
|
|
help
|
|
Enable this to use the I2C driver designed for the legacy PMIC
|
|
interface.
|
|
|
|
Not to be used for new designs and existing ones should be moved to
|
|
the new PMIC interface based on driver model.
|
|
|
|
endif
|