u-boot/drivers/spi/cadence_qspi.h
Chin Liang See 98fbd71d7a spi: cadence_qspi: Ensure spi_calibration is run when sclk change
Ensuring spi_calibration is run when there is a change of sclk
frequency. This will ensure the qspi flash access works for high
sclk frequency

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 02:34:15 +01:00

78 lines
2.4 KiB
C

/*
* Copyright (C) 2012
* Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CADENCE_QSPI_H__
#define __CADENCE_QSPI_H__
#define CQSPI_IS_ADDR(cmd_len) (cmd_len > 1 ? 1 : 0)
#define CQSPI_NO_DECODER_MAX_CS 4
#define CQSPI_DECODER_MAX_CS 16
#define CQSPI_READ_CAPTURE_MAX_DELAY 16
struct cadence_spi_platdata {
unsigned int max_hz;
void *regbase;
void *ahbbase;
u32 page_size;
u32 block_size;
u32 tshsl_ns;
u32 tsd2d_ns;
u32 tchsh_ns;
u32 tslch_ns;
u32 sram_size;
};
struct cadence_spi_priv {
void *regbase;
void *ahbbase;
size_t cmd_len;
u8 cmd_buf[32];
size_t data_len;
int qspi_is_init;
unsigned int qspi_calibrated_hz;
unsigned int qspi_calibrated_cs;
unsigned int previous_hz;
};
/* Functions call declaration */
void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat);
void cadence_qspi_apb_controller_enable(void *reg_base_addr);
void cadence_qspi_apb_controller_disable(void *reg_base_addr);
int cadence_qspi_apb_command_read(void *reg_base_addr,
unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf);
int cadence_qspi_apb_command_write(void *reg_base_addr,
unsigned int cmdlen, const u8 *cmdbuf,
unsigned int txlen, const u8 *txbuf);
int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf);
int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
unsigned int rxlen, u8 *rxbuf);
int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf);
int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
unsigned int txlen, const u8 *txbuf);
void cadence_qspi_apb_chipselect(void *reg_base,
unsigned int chip_select, unsigned int decoder_enable);
void cadence_qspi_apb_set_clk_mode(void *reg_base_addr,
unsigned int clk_pol, unsigned int clk_pha);
void cadence_qspi_apb_config_baudrate_div(void *reg_base,
unsigned int ref_clk_hz, unsigned int sclk_hz);
void cadence_qspi_apb_delay(void *reg_base,
unsigned int ref_clk, unsigned int sclk_hz,
unsigned int tshsl_ns, unsigned int tsd2d_ns,
unsigned int tchsh_ns, unsigned int tslch_ns);
void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy);
void cadence_qspi_apb_readdata_capture(void *reg_base,
unsigned int bypass, unsigned int delay);
#endif /* __CADENCE_QSPI_H__ */