Stefano Babic d81b27a245 MX35: add support for woodburn board ... The woodburn board is based on the MX35 SOC. Support for both external (NOR) and internal (SD Card) boot mode are added. It uses the generic SPL framework to implement the internal boot mode. The following peripherals are supported: - Ethernet (FEC) - SD Card - NAND (512 MB) - NOR Flash In the internal boot mode, a simple imximage header is generated to set the address in internal RAM where the SOC must copy the SPL code. The initial setup is then demanded to the SPL itself. Signed-off-by: Stefano Babic <sbabic@denx.de>		2012-10-26 16:27:59 +02:00
..
mx31	imx: Use MXC_I2C_CLK in imx i2c driver	2012-10-15 11:54:10 -07:00
mx35	MX35: add support for woodburn board	2012-10-26 16:27:59 +02:00
omap24xx	omap24xx: fix 'reset_timer_masked' declaration error	2011-09-07 22:03:06 +02:00
config.mk	ARM: Add SPL target to arm1136	2012-10-26 16:27:59 +02:00
cpu.c	ARM1136: Fix cache range checks	2012-07-21 23:24:25 +02:00
Makefile	Switch from archive libraries to partial linking	2010-11-17 21:02:18 +01:00
start.S	ARM: Fix start.S when used with SPL in arm1136	2012-10-26 16:27:58 +02:00
u-boot-spl.lds	MX35: Add soc_boot_mode and soc_boot_device to MX35	2012-10-26 16:27:58 +02:00