u-boot/board/amcc/acadia/pll.c
Stefan Roese afabb498b7 ppc4xx: Big header cleanup part 2, mostly PPC405 related
This cleanup is done by creating header files for all SoC versions and
moving the SoC specific defines into these special headers. This way the
common header ppc405.h and ppc440.h can be cleaned up finally.

As a part from this cleanup, the GPIO definitions for PPC405EP are
corrected. The high and low parts of the registers (for example
CONFIG_SYS_GPIO0_OSRL vs. CONFIG_SYS_GPIO0_OSRH) have been defined in
the wrong order. This patch now fixes this issue by switching these
xxxH and xxxL values. This brings the GPIO 405EP port in sync with all
other PPC4xx ports.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00

195 lines
5.2 KiB
C

/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/ppc405.h>
/* test-only: move into cpu directory!!! */
#if defined(PLLMR0_200_133_66)
void board_pll_init_f(void)
{
/*
* set PLL clocks based on input sysclk is 33M
*
* ----------------------------------
* | CLK | FREQ (MHz) | DIV RATIO |
* ----------------------------------
* | CPU | 200.0 | 4 (0x02)|
* | PLB | 133.3 | 6 (0x06)|
* | OPB | 66.6 | 12 (0x0C)|
* | EBC | 66.6 | 12 (0x0C)|
* | SPI | 66.6 | 12 (0x0C)|
* | UART0 | 10.0 | 40 (0x28)|
* | UART1 | 10.0 | 40 (0x28)|
* | DAC | 2.0 | 200 (0xC8)|
* | ADC | 2.0 | 200 (0xC8)|
* | PWM | 100.0 | 4 (0x04)|
* | EMAC | 25.0 | 16 (0x10)|
* -----------------------------------
*/
/* Initialize PLL */
mtcpr(CPR0_PLLC, 0x0000033c);
mtcpr(CPR0_PLLD, 0x0c010200);
mtcpr(CPR0_PRIMAD, 0x04060c0c);
mtcpr(CPR0_PERD0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */
mtcpr(CPR0_CLKUPD, 0x40000000);
}
#elif defined(PLLMR0_266_160_80)
void board_pll_init_f(void)
{
/*
* set PLL clocks based on input sysclk is 33M
*
* ----------------------------------
* | CLK | FREQ (MHz) | DIV RATIO |
* ----------------------------------
* | CPU | 266.64 | 3 |
* | PLB | 159.98 | 5 (0x05)|
* | OPB | 79.99 | 10 (0x0A)|
* | EBC | 79.99 | 10 (0x0A)|
* | SPI | 79.99 | 10 (0x0A)|
* | UART0 | 28.57 | 7 (0x07)|
* | UART1 | 28.57 | 7 (0x07)|
* | DAC | 28.57 | 7 (0xA7)|
* | ADC | 4 | 50 (0x32)|
* | PWM | 28.57 | 7 (0x07)|
* | EMAC | 4 | 50 (0x32)|
* -----------------------------------
*/
/* Initialize PLL */
mtcpr(CPR0_PLLC, 0x20000238);
mtcpr(CPR0_PLLD, 0x03010400);
mtcpr(CPR0_PRIMAD, 0x03050a0a);
mtcpr(CPR0_PERC0, 0x00000000);
mtcpr(CPR0_PERD0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */
mtcpr(CPR0_PERD1, 0x07323200);
mtcpr(CPR0_CLKUP, 0x40000000);
}
#elif defined(PLLMR0_333_166_83)
void board_pll_init_f(void)
{
/*
* set PLL clocks based on input sysclk is 33M
*
* ----------------------------------
* | CLK | FREQ (MHz) | DIV RATIO |
* ----------------------------------
* | CPU | 333.33 | 2 |
* | PLB | 166.66 | 4 (0x04)|
* | OPB | 83.33 | 8 (0x08)|
* | EBC | 83.33 | 8 (0x08)|
* | SPI | 83.33 | 8 (0x08)|
* | UART0 | 16.66 | 5 (0x05)|
* | UART1 | 16.66 | 5 (0x05)|
* | DAC | ???? | 166 (0xA6)|
* | ADC | ???? | 166 (0xA6)|
* | PWM | 41.66 | 3 (0x03)|
* | EMAC | ???? | 3 (0x03)|
* -----------------------------------
*/
/* Initialize PLL */
mtcpr(CPR0_PLLC, 0x0000033C);
mtcpr(CPR0_PLLD, 0x0a010000);
mtcpr(CPR0_PRIMAD, 0x02040808);
mtcpr(CPR0_PERD0, 0x02080505); /* SPI clk div. eq. OPB clk div. */
mtcpr(CPR0_PERD1, 0xA6A60300);
mtcpr(CPR0_CLKUP, 0x40000000);
}
#elif defined(PLLMR0_100_100_12)
void board_pll_init_f(void)
{
/*
* set PLL clocks based on input sysclk is 33M
*
* ----------------------
* | CLK | FREQ (MHz) |
* ----------------------
* | CPU | 100.00 |
* | PLB | 100.00 |
* | OPB | 12.00 |
* | EBC | 49.00 |
* ----------------------
*/
/* Initialize PLL */
mtcpr(CPR0_PLLC, 0x000003BC);
mtcpr(CPR0_PLLD, 0x06060600);
mtcpr(CPR0_PRIMAD, 0x02020004);
mtcpr(CPR0_PERD0, 0x04002828); /* SPI clk div. eq. OPB clk div. */
mtcpr(CPR0_PERD1, 0xC8C81600);
mtcpr(CPR0_CLKUP, 0x40000000);
}
#endif /* CPU_<speed>_405EZ */
#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL)
/*
* Get timebase clock frequency
*/
unsigned long get_tbclk(void)
{
unsigned long cpr_plld;
unsigned long cpr_primad;
unsigned long primad_cpudv;
unsigned long pllFbkDiv;
unsigned long freqProcessor;
/*
* Read PLL Mode registers
*/
mfcpr(CPR0_PLLD, cpr_plld);
/*
* Read CPR_PRIMAD register
*/
mfcpr(CPR0_PRIMAD, cpr_primad);
/*
* Determine CPU clock frequency
*/
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
if (primad_cpudv == 0)
primad_cpudv = 16;
/*
* Determine FBK_DIV.
*/
pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
if (pllFbkDiv == 0)
pllFbkDiv = 256;
freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
return (freqProcessor);
}
#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */