mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
0478dac62a
At this point in the conversion there should be no need to have logic to disable some symbol during the SPL build as all symbols should have an SPL counterpart. The main real changes done here are that we now must make proper use of CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we developed prior to CONFIG_IS_ENABLED() being available. Signed-off-by: Tom Rini <trini@konsulko.com>
336 lines
7.4 KiB
C
336 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
*
|
|
* Modified to support C structur SoC access by
|
|
* Andreas Bießmann <biessmann@corscience.de>
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <watchdog.h>
|
|
#include <serial.h>
|
|
#include <debug_uart.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#if CONFIG_IS_ENABLED(DM_SERIAL)
|
|
#include <asm/arch/atmel_serial.h>
|
|
#endif
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "atmel_usart.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_SERIAL)
|
|
static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id,
|
|
int baudrate)
|
|
{
|
|
unsigned long divisor;
|
|
unsigned long usart_hz;
|
|
|
|
/*
|
|
* Master Clock
|
|
* Baud Rate = --------------
|
|
* 16 * CD
|
|
*/
|
|
usart_hz = get_usart_clk_rate(id);
|
|
divisor = (usart_hz / 16 + baudrate / 2) / baudrate;
|
|
writel(USART3_BF(CD, divisor), &usart->brgr);
|
|
}
|
|
|
|
static void atmel_serial_init_internal(atmel_usart3_t *usart)
|
|
{
|
|
/*
|
|
* Just in case: drain transmitter register
|
|
* 1000us is enough for baudrate >= 9600
|
|
*/
|
|
if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY)))
|
|
__udelay(1000);
|
|
|
|
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
|
|
}
|
|
|
|
static void atmel_serial_activate(atmel_usart3_t *usart)
|
|
{
|
|
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
|
|
| USART3_BF(USCLKS, USART3_USCLKS_MCK)
|
|
| USART3_BF(CHRL, USART3_CHRL_8)
|
|
| USART3_BF(PAR, USART3_PAR_NONE)
|
|
| USART3_BF(NBSTOP, USART3_NBSTOP_1)),
|
|
&usart->mr);
|
|
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
|
|
/* 100us is enough for the new settings to be settled */
|
|
__udelay(100);
|
|
}
|
|
|
|
static void atmel_serial_setbrg(void)
|
|
{
|
|
atmel_serial_setbrg_internal((atmel_usart3_t *)CFG_USART_BASE,
|
|
CFG_USART_ID, gd->baudrate);
|
|
}
|
|
|
|
static int atmel_serial_init(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CFG_USART_BASE;
|
|
|
|
atmel_serial_init_internal(usart);
|
|
serial_setbrg();
|
|
atmel_serial_activate(usart);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_serial_putc(char c)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CFG_USART_BASE;
|
|
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
|
|
writel(c, &usart->thr);
|
|
}
|
|
|
|
static int atmel_serial_getc(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CFG_USART_BASE;
|
|
|
|
while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
|
|
schedule();
|
|
return readl(&usart->rhr);
|
|
}
|
|
|
|
static int atmel_serial_tstc(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CFG_USART_BASE;
|
|
return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
|
|
}
|
|
|
|
static struct serial_device atmel_serial_drv = {
|
|
.name = "atmel_serial",
|
|
.start = atmel_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = atmel_serial_setbrg,
|
|
.putc = atmel_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = atmel_serial_getc,
|
|
.tstc = atmel_serial_tstc,
|
|
};
|
|
|
|
void atmel_serial_initialize(void)
|
|
{
|
|
serial_register(&atmel_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &atmel_serial_drv;
|
|
}
|
|
#else
|
|
enum serial_clk_type {
|
|
CLK_TYPE_NORMAL = 0,
|
|
CLK_TYPE_DBGU,
|
|
};
|
|
|
|
struct atmel_serial_priv {
|
|
atmel_usart3_t *usart;
|
|
ulong usart_clk_rate;
|
|
};
|
|
|
|
static void _atmel_serial_set_brg(atmel_usart3_t *usart,
|
|
ulong usart_clk_rate, int baudrate)
|
|
{
|
|
unsigned long divisor;
|
|
|
|
divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate;
|
|
writel(USART3_BF(CD, divisor), &usart->brgr);
|
|
}
|
|
|
|
void _atmel_serial_init(atmel_usart3_t *usart,
|
|
ulong usart_clk_rate, int baudrate)
|
|
{
|
|
writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), &usart->cr);
|
|
|
|
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) |
|
|
USART3_BF(USCLKS, USART3_USCLKS_MCK) |
|
|
USART3_BF(CHRL, USART3_CHRL_8) |
|
|
USART3_BF(PAR, USART3_PAR_NONE) |
|
|
USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr);
|
|
|
|
_atmel_serial_set_brg(usart, usart_clk_rate, baudrate);
|
|
|
|
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
|
|
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
|
|
}
|
|
|
|
int atmel_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
_atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_serial_getc(struct udevice *dev)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY)))
|
|
return -EAGAIN;
|
|
|
|
return readl(&priv->usart->rhr);
|
|
}
|
|
|
|
static int atmel_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY)))
|
|
return -EAGAIN;
|
|
|
|
writel(ch, &priv->usart->thr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
uint32_t csr = readl(&priv->usart->csr);
|
|
|
|
if (input)
|
|
return csr & USART3_BIT(RXRDY) ? 1 : 0;
|
|
else
|
|
return csr & USART3_BIT(TXEMPTY) ? 0 : 1;
|
|
}
|
|
|
|
static const struct dm_serial_ops atmel_serial_ops = {
|
|
.putc = atmel_serial_putc,
|
|
.pending = atmel_serial_pending,
|
|
.getc = atmel_serial_getc,
|
|
.setbrg = atmel_serial_setbrg,
|
|
};
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK)
|
|
static int atmel_serial_enable_clk(struct udevice *dev)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Use fixed clock value in SPL */
|
|
priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int atmel_serial_enable_clk(struct udevice *dev)
|
|
{
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
struct clk clk;
|
|
ulong clk_rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if (dev_get_driver_data(dev) == CLK_TYPE_NORMAL) {
|
|
ret = clk_enable(&clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
clk_rate = clk_get_rate(&clk);
|
|
if (!clk_rate)
|
|
return -EINVAL;
|
|
|
|
priv->usart_clk_rate = clk_rate;
|
|
|
|
clk_free(&clk);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int atmel_serial_probe(struct udevice *dev)
|
|
{
|
|
struct atmel_serial_plat *plat = dev_get_plat(dev);
|
|
struct atmel_serial_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
fdt_addr_t addr_base;
|
|
|
|
addr_base = dev_read_addr(dev);
|
|
if (addr_base == FDT_ADDR_T_NONE)
|
|
return -ENODEV;
|
|
|
|
plat->base_addr = (uint32_t)addr_base;
|
|
#endif
|
|
priv->usart = (atmel_usart3_t *)plat->base_addr;
|
|
|
|
ret = atmel_serial_enable_clk(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
_atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static const struct udevice_id atmel_serial_ids[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9260-dbgu",
|
|
.data = CLK_TYPE_DBGU,
|
|
},
|
|
{
|
|
.compatible = "atmel,at91sam9260-usart",
|
|
.data = CLK_TYPE_NORMAL,
|
|
},
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
U_BOOT_DRIVER(serial_atmel) = {
|
|
.name = "serial_atmel",
|
|
.id = UCLASS_SERIAL,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.of_match = atmel_serial_ids,
|
|
.plat_auto = sizeof(struct atmel_serial_plat),
|
|
#endif
|
|
.probe = atmel_serial_probe,
|
|
.ops = &atmel_serial_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
#endif
|
|
.priv_auto = sizeof(struct atmel_serial_priv),
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_UART_ATMEL
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
|
|
_atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
|
|
while (!(readl(&usart->csr) & USART3_BIT(TXRDY)))
|
|
;
|
|
|
|
writel(ch, &usart->thr);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
#endif
|