u-boot/drivers/power/regulator
Jonas Karlman fea7a29cc8 power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled
A quick power cycle of a LDO regulator during dw-mmc signal voltage
change has shown that SD-card does not always get recognized.

Linux driver use an enable_time of 400us for LDO regulators. Apply a
500us delay when a LDO regulator is enabled to fix possible issues.

Fixes: 94afc1cb46 ("power: regulator: rk8xx: update the driver for rk808 and rk818")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: elaine.zhang<elaine.zhang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
..
act8846.c dm: treewide: Rename 'platdata' variables to just 'plat' 2020-12-13 16:51:08 -07:00
anatop_regulator.c power: regulator: add driver for ANATOP regulator 2021-04-20 07:31:12 -04:00
as3722_regulator.c dm: treewide: Rename 'platdata' variables to just 'plat' 2020-12-13 16:51:08 -07:00
axp_regulator.c power: regulator: Add a driver for AXP PMIC regulators 2023-01-23 01:18:31 +00:00
axp_usb_power.c power: regulator: Add a driver for the AXP USB power supply 2023-04-28 01:29:40 +01:00
bd71837.c regulator: bd718x7: Bypass bogus warnings 2022-02-05 15:49:01 +01:00
da9063.c dm: Use access methods for dev/uclass private data 2021-01-05 12:24:40 -07:00
fan53555.c regulator: rename dev_pdata to plat 2023-07-04 11:21:07 +09:00
fixed.c regulator: fixed: Add support for gpios prop 2023-07-28 18:45:03 +08:00
gpio-regulator.c regulator: rename dev_pdata to plat 2023-07-04 11:21:07 +09:00
Kconfig power: regulator: Add a driver for the AXP USB power supply 2023-04-28 01:29:40 +01:00
lp873x_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
lp87565_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
Makefile power: regulator: Add a driver for the AXP USB power supply 2023-04-28 01:29:40 +01:00
max77686.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
npcm8xx_regulator.c power: regulator: Add support for NPCM8xx 2022-12-26 15:44:00 +09:00
palmas_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
pbias_regulator.c dm: core: Access device ofnode through functions 2021-01-05 12:24:41 -07:00
pca9450.c power: pmic: Add NXP PCA9451A PMIC support 2023-03-30 00:45:39 +02:00
pfuze100.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
pwm_regulator.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
regulator-uclass.c regulator: handle different error codes in regulator_set_enable_if_allowed 2023-07-04 11:21:12 +09:00
regulator_common.c regulator: rename dev_pdata to plat 2023-07-04 11:21:07 +09:00
regulator_common.h regulator: rename dev_pdata to plat 2023-07-04 11:21:07 +09:00
rk8xx.c power: regulator: rk8xx: Add 500us delay after LDO regulator is enabled 2023-07-31 20:33:18 +08:00
s2mps11_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
s5m8767.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
sandbox.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
scmi_regulator.c power: regulator: scmi: simplify scmi_voltd_set_enable() 2022-06-23 13:12:56 -04:00
stm32-vrefbuf.c power: regulator: stm32-verfbuf: define LOG_CATEGORY 2021-01-13 09:52:58 +01:00
stpmic1.c dm: treewide: Rename 'platdata' variables to just 'plat' 2020-12-13 16:51:08 -07:00
tps62360_regulator.c dm: treewide: Rename dev_get_platdata() to dev_get_plat() 2020-12-13 16:51:09 -07:00
tps65090_regulator.c doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
tps65219_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00
tps65910_regulator.c dm: treewide: Rename ofdata_to_platdata() to of_to_plat() 2020-12-13 16:51:09 -07:00
tps65941_regulator.c power: regulator: Remove i2c header from gpio regulator 2022-08-10 13:38:30 -04:00