mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
50dee4f361
Set MMC clock when reverting to safe bus mode and speed in case current MMC mode fails. Otherwise, trying out the other modes may fail as well. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> [hp: fallback to legacy_speed] Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
3195 lines
72 KiB
C
3195 lines
72 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2008, Freescale Semiconductor, Inc
|
|
* Copyright 2020 NXP
|
|
* Andy Fleming
|
|
*
|
|
* Based vaguely on the Linux code
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <blk.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/device-internal.h>
|
|
#include <errno.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <power/regulator.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <linux/list.h>
|
|
#include <div64.h>
|
|
#include "mmc_private.h"
|
|
|
|
#define DEFAULT_CMD6_TIMEOUT_MS 500
|
|
|
|
static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage);
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
|
|
static int mmc_wait_dat0(struct mmc *mmc, int state, int timeout_us)
|
|
{
|
|
if (mmc->cfg->ops->wait_dat0)
|
|
return mmc->cfg->ops->wait_dat0(mmc, state, timeout_us);
|
|
|
|
return -ENOSYS;
|
|
}
|
|
|
|
__weak int board_mmc_getwp(struct mmc *mmc)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int mmc_getwp(struct mmc *mmc)
|
|
{
|
|
int wp;
|
|
|
|
wp = board_mmc_getwp(mmc);
|
|
|
|
if (wp < 0) {
|
|
if (mmc->cfg->ops->getwp)
|
|
wp = mmc->cfg->ops->getwp(mmc);
|
|
else
|
|
wp = 0;
|
|
}
|
|
|
|
return wp;
|
|
}
|
|
|
|
__weak int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MMC_TRACE
|
|
void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd)
|
|
{
|
|
printf("CMD_SEND:%d\n", cmd->cmdidx);
|
|
printf("\t\tARG\t\t\t 0x%08x\n", cmd->cmdarg);
|
|
}
|
|
|
|
void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd, int ret)
|
|
{
|
|
int i;
|
|
u8 *ptr;
|
|
|
|
if (ret) {
|
|
printf("\t\tRET\t\t\t %d\n", ret);
|
|
} else {
|
|
switch (cmd->resp_type) {
|
|
case MMC_RSP_NONE:
|
|
printf("\t\tMMC_RSP_NONE\n");
|
|
break;
|
|
case MMC_RSP_R1:
|
|
printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08x \n",
|
|
cmd->response[0]);
|
|
break;
|
|
case MMC_RSP_R1b:
|
|
printf("\t\tMMC_RSP_R1b\t\t 0x%08x \n",
|
|
cmd->response[0]);
|
|
break;
|
|
case MMC_RSP_R2:
|
|
printf("\t\tMMC_RSP_R2\t\t 0x%08x \n",
|
|
cmd->response[0]);
|
|
printf("\t\t \t\t 0x%08x \n",
|
|
cmd->response[1]);
|
|
printf("\t\t \t\t 0x%08x \n",
|
|
cmd->response[2]);
|
|
printf("\t\t \t\t 0x%08x \n",
|
|
cmd->response[3]);
|
|
printf("\n");
|
|
printf("\t\t\t\t\tDUMPING DATA\n");
|
|
for (i = 0; i < 4; i++) {
|
|
int j;
|
|
printf("\t\t\t\t\t%03d - ", i*4);
|
|
ptr = (u8 *)&cmd->response[i];
|
|
ptr += 3;
|
|
for (j = 0; j < 4; j++)
|
|
printf("%02x ", *ptr--);
|
|
printf("\n");
|
|
}
|
|
break;
|
|
case MMC_RSP_R3:
|
|
printf("\t\tMMC_RSP_R3,4\t\t 0x%08x \n",
|
|
cmd->response[0]);
|
|
break;
|
|
default:
|
|
printf("\t\tERROR MMC rsp not supported\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd)
|
|
{
|
|
int status;
|
|
|
|
status = (cmd->response[0] & MMC_STATUS_CURR_STATE) >> 9;
|
|
printf("CURR STATE:%d\n", status);
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_VERBOSE) || defined(DEBUG) || CONFIG_VAL(LOGLEVEL) >= LOGL_DEBUG
|
|
const char *mmc_mode_name(enum bus_mode mode)
|
|
{
|
|
static const char *const names[] = {
|
|
[MMC_LEGACY] = "MMC legacy",
|
|
[MMC_HS] = "MMC High Speed (26MHz)",
|
|
[SD_HS] = "SD High Speed (50MHz)",
|
|
[UHS_SDR12] = "UHS SDR12 (25MHz)",
|
|
[UHS_SDR25] = "UHS SDR25 (50MHz)",
|
|
[UHS_SDR50] = "UHS SDR50 (100MHz)",
|
|
[UHS_SDR104] = "UHS SDR104 (208MHz)",
|
|
[UHS_DDR50] = "UHS DDR50 (50MHz)",
|
|
[MMC_HS_52] = "MMC High Speed (52MHz)",
|
|
[MMC_DDR_52] = "MMC DDR52 (52MHz)",
|
|
[MMC_HS_200] = "HS200 (200MHz)",
|
|
[MMC_HS_400] = "HS400 (200MHz)",
|
|
[MMC_HS_400_ES] = "HS400ES (200MHz)",
|
|
};
|
|
|
|
if (mode >= MMC_MODES_END)
|
|
return "Unknown mode";
|
|
else
|
|
return names[mode];
|
|
}
|
|
#endif
|
|
|
|
static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode)
|
|
{
|
|
static const int freqs[] = {
|
|
[MMC_LEGACY] = 25000000,
|
|
[MMC_HS] = 26000000,
|
|
[SD_HS] = 50000000,
|
|
[MMC_HS_52] = 52000000,
|
|
[MMC_DDR_52] = 52000000,
|
|
[UHS_SDR12] = 25000000,
|
|
[UHS_SDR25] = 50000000,
|
|
[UHS_SDR50] = 100000000,
|
|
[UHS_DDR50] = 50000000,
|
|
[UHS_SDR104] = 208000000,
|
|
[MMC_HS_200] = 200000000,
|
|
[MMC_HS_400] = 200000000,
|
|
[MMC_HS_400_ES] = 200000000,
|
|
};
|
|
|
|
if (mode == MMC_LEGACY)
|
|
return mmc->legacy_speed;
|
|
else if (mode >= MMC_MODES_END)
|
|
return 0;
|
|
else
|
|
return freqs[mode];
|
|
}
|
|
|
|
static int mmc_select_mode(struct mmc *mmc, enum bus_mode mode)
|
|
{
|
|
mmc->selected_mode = mode;
|
|
mmc->tran_speed = mmc_mode2freq(mmc, mode);
|
|
mmc->ddr_mode = mmc_is_mode_ddr(mode);
|
|
pr_debug("selecting mode %s (freq : %d MHz)\n", mmc_mode_name(mode),
|
|
mmc->tran_speed / 1000000);
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
int ret;
|
|
|
|
mmmc_trace_before_send(mmc, cmd);
|
|
ret = mmc->cfg->ops->send_cmd(mmc, cmd, data);
|
|
mmmc_trace_after_send(mmc, cmd, ret);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* mmc_send_cmd_retry() - send a command to the mmc device, retrying on error
|
|
*
|
|
* @dev: device to receive the command
|
|
* @cmd: command to send
|
|
* @data: additional data to send/receive
|
|
* @retries: how many times to retry; mmc_send_cmd is always called at least
|
|
* once
|
|
* Return: 0 if ok, -ve on error
|
|
*/
|
|
static int mmc_send_cmd_retry(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data, uint retries)
|
|
{
|
|
int ret;
|
|
|
|
do {
|
|
ret = mmc_send_cmd(mmc, cmd, data);
|
|
} while (ret && retries--);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* mmc_send_cmd_quirks() - send a command to the mmc device, retrying if a
|
|
* specific quirk is enabled
|
|
*
|
|
* @dev: device to receive the command
|
|
* @cmd: command to send
|
|
* @data: additional data to send/receive
|
|
* @quirk: retry only if this quirk is enabled
|
|
* @retries: how many times to retry; mmc_send_cmd is always called at least
|
|
* once
|
|
* Return: 0 if ok, -ve on error
|
|
*/
|
|
static int mmc_send_cmd_quirks(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data, u32 quirk, uint retries)
|
|
{
|
|
if (IS_ENABLED(CONFIG_MMC_QUIRKS) && mmc->quirks & quirk)
|
|
return mmc_send_cmd_retry(mmc, cmd, data, retries);
|
|
else
|
|
return mmc_send_cmd(mmc, cmd, data);
|
|
}
|
|
|
|
int mmc_send_status(struct mmc *mmc, unsigned int *status)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int ret;
|
|
|
|
cmd.cmdidx = MMC_CMD_SEND_STATUS;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
if (!mmc_host_is_spi(mmc))
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
|
|
ret = mmc_send_cmd_retry(mmc, &cmd, NULL, 4);
|
|
mmc_trace_state(mmc, &cmd);
|
|
if (!ret)
|
|
*status = cmd.response[0];
|
|
|
|
return ret;
|
|
}
|
|
|
|
int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
|
|
{
|
|
unsigned int status;
|
|
int err;
|
|
|
|
err = mmc_wait_dat0(mmc, 1, timeout_ms * 1000);
|
|
if (err != -ENOSYS)
|
|
return err;
|
|
|
|
while (1) {
|
|
err = mmc_send_status(mmc, &status);
|
|
if (err)
|
|
return err;
|
|
|
|
if ((status & MMC_STATUS_RDY_FOR_DATA) &&
|
|
(status & MMC_STATUS_CURR_STATE) !=
|
|
MMC_STATE_PRG)
|
|
break;
|
|
|
|
if (status & MMC_STATUS_MASK) {
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
pr_err("Status Error: 0x%08x\n", status);
|
|
#endif
|
|
return -ECOMM;
|
|
}
|
|
|
|
if (timeout_ms-- <= 0)
|
|
break;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
if (timeout_ms <= 0) {
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
pr_err("Timeout waiting card ready\n");
|
|
#endif
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_set_blocklen(struct mmc *mmc, int len)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
|
|
if (mmc->ddr_mode)
|
|
return 0;
|
|
|
|
cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = len;
|
|
|
|
return mmc_send_cmd_quirks(mmc, &cmd, NULL,
|
|
MMC_QUIRK_RETRY_SET_BLOCKLEN, 4);
|
|
}
|
|
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
static const u8 tuning_blk_pattern_4bit[] = {
|
|
0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
|
|
0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
|
|
0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
|
|
0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
|
|
0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
|
|
0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
|
|
0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
|
|
0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
|
|
};
|
|
|
|
static const u8 tuning_blk_pattern_8bit[] = {
|
|
0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
|
|
0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
|
|
0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
|
|
0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
|
|
0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
|
|
0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
|
|
0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
|
|
0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
|
|
0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
|
|
0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
|
|
0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
|
|
0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
|
|
0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
|
|
0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
|
|
0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
|
|
0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
|
|
};
|
|
|
|
int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
struct mmc_data data;
|
|
const u8 *tuning_block_pattern;
|
|
int size, err;
|
|
|
|
if (mmc->bus_width == 8) {
|
|
tuning_block_pattern = tuning_blk_pattern_8bit;
|
|
size = sizeof(tuning_blk_pattern_8bit);
|
|
} else if (mmc->bus_width == 4) {
|
|
tuning_block_pattern = tuning_blk_pattern_4bit;
|
|
size = sizeof(tuning_blk_pattern_4bit);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, data_buf, size);
|
|
|
|
cmd.cmdidx = opcode;
|
|
cmd.cmdarg = 0;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
|
|
data.dest = (void *)data_buf;
|
|
data.blocks = 1;
|
|
data.blocksize = size;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, &data);
|
|
if (err)
|
|
return err;
|
|
|
|
if (memcmp(data_buf, tuning_block_pattern, size))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int mmc_send_stop_transmission(struct mmc *mmc, bool write)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
|
|
cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
|
|
cmd.cmdarg = 0;
|
|
/*
|
|
* JEDEC Standard No. 84-B51 Page 126
|
|
* CMD12 STOP_TRANSMISSION R1/R1b[3]
|
|
* NOTE 3 R1 for read cases and R1b for write cases.
|
|
*
|
|
* Physical Layer Simplified Specification Version 9.00
|
|
* 7.3.1.3 Detailed Command Description
|
|
* CMD12 R1b
|
|
*/
|
|
cmd.resp_type = (IS_SD(mmc) || write) ? MMC_RSP_R1b : MMC_RSP_R1;
|
|
|
|
return mmc_send_cmd(mmc, &cmd, NULL);
|
|
}
|
|
|
|
static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
|
|
lbaint_t blkcnt)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
struct mmc_data data;
|
|
|
|
if (blkcnt > 1)
|
|
cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
|
|
else
|
|
cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
|
|
|
|
if (mmc->high_capacity)
|
|
cmd.cmdarg = start;
|
|
else
|
|
cmd.cmdarg = start * mmc->read_bl_len;
|
|
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
|
|
data.dest = dst;
|
|
data.blocks = blkcnt;
|
|
data.blocksize = mmc->read_bl_len;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
if (mmc_send_cmd(mmc, &cmd, &data))
|
|
return 0;
|
|
|
|
if (blkcnt > 1) {
|
|
if (mmc_send_stop_transmission(mmc, false)) {
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
pr_err("mmc fail to send stop cmd\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return blkcnt;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt)
|
|
{
|
|
if (mmc->cfg->ops->get_b_max)
|
|
return mmc->cfg->ops->get_b_max(mmc, dst, blkcnt);
|
|
else
|
|
return mmc->cfg->b_max;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst)
|
|
#else
|
|
ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
|
|
void *dst)
|
|
#endif
|
|
{
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
struct blk_desc *block_dev = dev_get_uclass_plat(dev);
|
|
#endif
|
|
int dev_num = block_dev->devnum;
|
|
int err;
|
|
lbaint_t cur, blocks_todo = blkcnt;
|
|
uint b_max;
|
|
|
|
if (blkcnt == 0)
|
|
return 0;
|
|
|
|
struct mmc *mmc = find_mmc_device(dev_num);
|
|
if (!mmc)
|
|
return 0;
|
|
|
|
if (CONFIG_IS_ENABLED(MMC_TINY))
|
|
err = mmc_switch_part(mmc, block_dev->hwpart);
|
|
else
|
|
err = blk_dselect_hwpart(block_dev, block_dev->hwpart);
|
|
|
|
if (err < 0)
|
|
return 0;
|
|
|
|
if ((start + blkcnt) > block_dev->lba) {
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
|
|
start + blkcnt, block_dev->lba);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
if (mmc_set_blocklen(mmc, mmc->read_bl_len)) {
|
|
pr_debug("%s: Failed to set blocklen\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
b_max = mmc_get_b_max(mmc, dst, blkcnt);
|
|
|
|
do {
|
|
cur = (blocks_todo > b_max) ? b_max : blocks_todo;
|
|
if (mmc_read_blocks(mmc, dst, start, cur) != cur) {
|
|
pr_debug("%s: Failed to read blocks\n", __func__);
|
|
return 0;
|
|
}
|
|
blocks_todo -= cur;
|
|
start += cur;
|
|
dst += cur * mmc->read_bl_len;
|
|
} while (blocks_todo > 0);
|
|
|
|
return blkcnt;
|
|
}
|
|
|
|
static int mmc_go_idle(struct mmc *mmc)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int err;
|
|
|
|
udelay(1000);
|
|
|
|
cmd.cmdidx = MMC_CMD_GO_IDLE_STATE;
|
|
cmd.cmdarg = 0;
|
|
cmd.resp_type = MMC_RSP_NONE;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
udelay(2000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
static int mmc_switch_voltage(struct mmc *mmc, int signal_voltage)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int err = 0;
|
|
|
|
/*
|
|
* Send CMD11 only if the request is to switch the card to
|
|
* 1.8V signalling.
|
|
*/
|
|
if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
|
return mmc_set_signal_voltage(mmc, signal_voltage);
|
|
|
|
cmd.cmdidx = SD_CMD_SWITCH_UHS18V;
|
|
cmd.cmdarg = 0;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!mmc_host_is_spi(mmc) && (cmd.response[0] & MMC_STATUS_ERROR))
|
|
return -EIO;
|
|
|
|
/*
|
|
* The card should drive cmd and dat[0:3] low immediately
|
|
* after the response of cmd11, but wait 100 us to be sure
|
|
*/
|
|
err = mmc_wait_dat0(mmc, 0, 100);
|
|
if (err == -ENOSYS)
|
|
udelay(100);
|
|
else if (err)
|
|
return -ETIMEDOUT;
|
|
|
|
/*
|
|
* During a signal voltage level switch, the clock must be gated
|
|
* for 5 ms according to the SD spec
|
|
*/
|
|
mmc_set_clock(mmc, mmc->clock, MMC_CLK_DISABLE);
|
|
|
|
err = mmc_set_signal_voltage(mmc, signal_voltage);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Keep clock gated for at least 10 ms, though spec only says 5 ms */
|
|
mdelay(10);
|
|
mmc_set_clock(mmc, mmc->clock, MMC_CLK_ENABLE);
|
|
|
|
/*
|
|
* Failure to switch is indicated by the card holding
|
|
* dat[0:3] low. Wait for at least 1 ms according to spec
|
|
*/
|
|
err = mmc_wait_dat0(mmc, 1, 1000);
|
|
if (err == -ENOSYS)
|
|
udelay(1000);
|
|
else if (err)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sd_send_op_cond(struct mmc *mmc, bool uhs_en)
|
|
{
|
|
int timeout = 1000;
|
|
int err;
|
|
struct mmc_cmd cmd;
|
|
|
|
while (1) {
|
|
cmd.cmdidx = MMC_CMD_APP_CMD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 0;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
cmd.cmdidx = SD_CMD_APP_SEND_OP_COND;
|
|
cmd.resp_type = MMC_RSP_R3;
|
|
|
|
/*
|
|
* Most cards do not answer if some reserved bits
|
|
* in the ocr are set. However, Some controller
|
|
* can set bit 7 (reserved for low voltages), but
|
|
* how to manage low voltages SD card is not yet
|
|
* specified.
|
|
*/
|
|
cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 :
|
|
(mmc->cfg->voltages & 0xff8000);
|
|
|
|
if (mmc->version == SD_VERSION_2)
|
|
cmd.cmdarg |= OCR_HCS;
|
|
|
|
if (uhs_en)
|
|
cmd.cmdarg |= OCR_S18R;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
if (cmd.response[0] & OCR_BUSY)
|
|
break;
|
|
|
|
if (timeout-- <= 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
if (mmc->version != SD_VERSION_2)
|
|
mmc->version = SD_VERSION_1_0;
|
|
|
|
if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
|
|
cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
|
|
cmd.resp_type = MMC_RSP_R3;
|
|
cmd.cmdarg = 0;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
mmc->ocr = cmd.response[0];
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
if (uhs_en && !(mmc_host_is_spi(mmc)) && (cmd.response[0] & 0x41000000)
|
|
== 0x41000000) {
|
|
err = mmc_switch_voltage(mmc, MMC_SIGNAL_VOLTAGE_180);
|
|
if (err)
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
|
|
mmc->rca = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int err;
|
|
|
|
cmd.cmdidx = MMC_CMD_SEND_OP_COND;
|
|
cmd.resp_type = MMC_RSP_R3;
|
|
cmd.cmdarg = 0;
|
|
if (use_arg && !mmc_host_is_spi(mmc))
|
|
cmd.cmdarg = OCR_HCS |
|
|
(mmc->cfg->voltages &
|
|
(mmc->ocr & OCR_VOLTAGE_MASK)) |
|
|
(mmc->ocr & OCR_ACCESS_MODE);
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
if (err)
|
|
return err;
|
|
mmc->ocr = cmd.response[0];
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_op_cond(struct mmc *mmc)
|
|
{
|
|
int err, i;
|
|
int timeout = 1000;
|
|
uint start;
|
|
|
|
/* Some cards seem to need this */
|
|
mmc_go_idle(mmc);
|
|
|
|
start = get_timer(0);
|
|
/* Asking to the card its capabilities */
|
|
for (i = 0; ; i++) {
|
|
err = mmc_send_op_cond_iter(mmc, i != 0);
|
|
if (err)
|
|
return err;
|
|
|
|
/* exit if not busy (flag seems to be inverted) */
|
|
if (mmc->ocr & OCR_BUSY)
|
|
break;
|
|
|
|
if (get_timer(start) > timeout)
|
|
return -ETIMEDOUT;
|
|
udelay(100);
|
|
}
|
|
mmc->op_cond_pending = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_complete_op_cond(struct mmc *mmc)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int timeout = 1000;
|
|
ulong start;
|
|
int err;
|
|
|
|
mmc->op_cond_pending = 0;
|
|
if (!(mmc->ocr & OCR_BUSY)) {
|
|
/* Some cards seem to need this */
|
|
mmc_go_idle(mmc);
|
|
|
|
start = get_timer(0);
|
|
while (1) {
|
|
err = mmc_send_op_cond_iter(mmc, 1);
|
|
if (err)
|
|
return err;
|
|
if (mmc->ocr & OCR_BUSY)
|
|
break;
|
|
if (get_timer(start) > timeout)
|
|
return -EOPNOTSUPP;
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
|
|
cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
|
|
cmd.resp_type = MMC_RSP_R3;
|
|
cmd.cmdarg = 0;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
mmc->ocr = cmd.response[0];
|
|
}
|
|
|
|
mmc->version = MMC_VERSION_UNKNOWN;
|
|
|
|
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
|
|
mmc->rca = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
struct mmc_data data;
|
|
int err;
|
|
|
|
/* Get the Card Status Register */
|
|
cmd.cmdidx = MMC_CMD_SEND_EXT_CSD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 0;
|
|
|
|
data.dest = (char *)ext_csd;
|
|
data.blocks = 1;
|
|
data.blocksize = MMC_MAX_BLOCK_LEN;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, &data);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value,
|
|
bool send_status)
|
|
{
|
|
unsigned int status, start;
|
|
struct mmc_cmd cmd;
|
|
int timeout_ms = DEFAULT_CMD6_TIMEOUT_MS;
|
|
bool is_part_switch = (set == EXT_CSD_CMD_SET_NORMAL) &&
|
|
(index == EXT_CSD_PART_CONF);
|
|
int ret;
|
|
|
|
if (mmc->gen_cmd6_time)
|
|
timeout_ms = mmc->gen_cmd6_time * 10;
|
|
|
|
if (is_part_switch && mmc->part_switch_time)
|
|
timeout_ms = mmc->part_switch_time * 10;
|
|
|
|
cmd.cmdidx = MMC_CMD_SWITCH;
|
|
cmd.resp_type = MMC_RSP_R1b;
|
|
cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
|
|
(index << 16) |
|
|
(value << 8);
|
|
|
|
ret = mmc_send_cmd_retry(mmc, &cmd, NULL, 3);
|
|
if (ret)
|
|
return ret;
|
|
|
|
start = get_timer(0);
|
|
|
|
/* poll dat0 for rdy/buys status */
|
|
ret = mmc_wait_dat0(mmc, 1, timeout_ms * 1000);
|
|
if (ret && ret != -ENOSYS)
|
|
return ret;
|
|
|
|
/*
|
|
* In cases when neiter allowed to poll by using CMD13 nor we are
|
|
* capable of polling by using mmc_wait_dat0, then rely on waiting the
|
|
* stated timeout to be sufficient.
|
|
*/
|
|
if (ret == -ENOSYS && !send_status) {
|
|
mdelay(timeout_ms);
|
|
return 0;
|
|
}
|
|
|
|
if (!send_status)
|
|
return 0;
|
|
|
|
/* Finally wait until the card is ready or indicates a failure
|
|
* to switch. It doesn't hurt to use CMD13 here even if send_status
|
|
* is false, because by now (after 'timeout_ms' ms) the bus should be
|
|
* reliable.
|
|
*/
|
|
do {
|
|
ret = mmc_send_status(mmc, &status);
|
|
|
|
if (!ret && (status & MMC_STATUS_SWITCH_ERROR)) {
|
|
pr_debug("switch failed %d/%d/0x%x !\n", set, index,
|
|
value);
|
|
return -EIO;
|
|
}
|
|
if (!ret && (status & MMC_STATUS_RDY_FOR_DATA) &&
|
|
(status & MMC_STATUS_CURR_STATE) == MMC_STATE_TRANS)
|
|
return 0;
|
|
udelay(100);
|
|
} while (get_timer(start) < timeout_ms);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
|
|
{
|
|
return __mmc_switch(mmc, set, index, value, true);
|
|
}
|
|
|
|
int mmc_boot_wp(struct mmc *mmc)
|
|
{
|
|
return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, 1);
|
|
}
|
|
|
|
int mmc_boot_wp_single_partition(struct mmc *mmc, int partition)
|
|
{
|
|
u8 value;
|
|
int ret;
|
|
|
|
value = EXT_CSD_BOOT_WP_B_PWR_WP_EN;
|
|
|
|
if (partition == 0) {
|
|
value |= EXT_CSD_BOOT_WP_B_SEC_WP_SEL;
|
|
ret = mmc_switch(mmc,
|
|
EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_BOOT_WP,
|
|
value);
|
|
} else if (partition == 1) {
|
|
value |= EXT_CSD_BOOT_WP_B_SEC_WP_SEL;
|
|
value |= EXT_CSD_BOOT_WP_B_PWR_WP_SEC_SEL;
|
|
ret = mmc_switch(mmc,
|
|
EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_BOOT_WP,
|
|
value);
|
|
} else {
|
|
ret = mmc_boot_wp(mmc);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(MMC_TINY)
|
|
static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode,
|
|
bool hsdowngrade)
|
|
{
|
|
int err;
|
|
int speed_bits;
|
|
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
|
|
|
|
switch (mode) {
|
|
case MMC_HS:
|
|
case MMC_HS_52:
|
|
case MMC_DDR_52:
|
|
speed_bits = EXT_CSD_TIMING_HS;
|
|
break;
|
|
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
|
|
case MMC_HS_200:
|
|
speed_bits = EXT_CSD_TIMING_HS200;
|
|
break;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
case MMC_HS_400:
|
|
speed_bits = EXT_CSD_TIMING_HS400;
|
|
break;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
case MMC_HS_400_ES:
|
|
speed_bits = EXT_CSD_TIMING_HS400;
|
|
break;
|
|
#endif
|
|
case MMC_LEGACY:
|
|
speed_bits = EXT_CSD_TIMING_LEGACY;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = __mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
|
|
speed_bits, !hsdowngrade);
|
|
if (err)
|
|
return err;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
/*
|
|
* In case the eMMC is in HS200/HS400 mode and we are downgrading
|
|
* to HS mode, the card clock are still running much faster than
|
|
* the supported HS mode clock, so we can not reliably read out
|
|
* Extended CSD. Reconfigure the controller to run at HS mode.
|
|
*/
|
|
if (hsdowngrade) {
|
|
mmc_select_mode(mmc, MMC_HS);
|
|
mmc_set_clock(mmc, mmc_mode2freq(mmc, MMC_HS), false);
|
|
}
|
|
#endif
|
|
|
|
if ((mode == MMC_HS) || (mode == MMC_HS_52)) {
|
|
/* Now check to see that it worked */
|
|
err = mmc_send_ext_csd(mmc, test_csd);
|
|
if (err)
|
|
return err;
|
|
|
|
/* No high-speed support */
|
|
if (!test_csd[EXT_CSD_HS_TIMING])
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_get_capabilities(struct mmc *mmc)
|
|
{
|
|
u8 *ext_csd = mmc->ext_csd;
|
|
char cardtype;
|
|
|
|
mmc->card_caps = MMC_MODE_1BIT | MMC_CAP(MMC_LEGACY);
|
|
|
|
if (mmc_host_is_spi(mmc))
|
|
return 0;
|
|
|
|
/* Only version 4 supports high-speed */
|
|
if (mmc->version < MMC_VERSION_4)
|
|
return 0;
|
|
|
|
if (!ext_csd) {
|
|
pr_err("No ext_csd found!\n"); /* this should enver happen */
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
|
|
|
|
cardtype = ext_csd[EXT_CSD_CARD_TYPE];
|
|
mmc->cardtype = cardtype;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
|
|
if (cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V |
|
|
EXT_CSD_CARD_TYPE_HS200_1_8V)) {
|
|
mmc->card_caps |= MMC_MODE_HS200;
|
|
}
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V |
|
|
EXT_CSD_CARD_TYPE_HS400_1_8V)) {
|
|
mmc->card_caps |= MMC_MODE_HS400;
|
|
}
|
|
#endif
|
|
if (cardtype & EXT_CSD_CARD_TYPE_52) {
|
|
if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
|
|
mmc->card_caps |= MMC_MODE_DDR_52MHz;
|
|
mmc->card_caps |= MMC_MODE_HS_52MHz;
|
|
}
|
|
if (cardtype & EXT_CSD_CARD_TYPE_26)
|
|
mmc->card_caps |= MMC_MODE_HS;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
if (ext_csd[EXT_CSD_STROBE_SUPPORT] &&
|
|
(mmc->card_caps & MMC_MODE_HS400)) {
|
|
mmc->card_caps |= MMC_MODE_HS400_ES;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mmc_set_capacity(struct mmc *mmc, int part_num)
|
|
{
|
|
switch (part_num) {
|
|
case 0:
|
|
mmc->capacity = mmc->capacity_user;
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
mmc->capacity = mmc->capacity_boot;
|
|
break;
|
|
case 3:
|
|
mmc->capacity = mmc->capacity_rpmb;
|
|
break;
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
case 7:
|
|
mmc->capacity = mmc->capacity_gp[part_num - 4];
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
mmc_get_blk_desc(mmc)->lba = lldiv(mmc->capacity, mmc->read_bl_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_switch_part(struct mmc *mmc, unsigned int part_num)
|
|
{
|
|
int ret;
|
|
int retry = 3;
|
|
|
|
do {
|
|
ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_PART_CONF,
|
|
(mmc->part_config & ~PART_ACCESS_MASK)
|
|
| (part_num & PART_ACCESS_MASK));
|
|
} while (ret && retry--);
|
|
|
|
/*
|
|
* Set the capacity if the switch succeeded or was intended
|
|
* to return to representing the raw device.
|
|
*/
|
|
if ((ret == 0) || ((ret == -ENODEV) && (part_num == 0))) {
|
|
ret = mmc_set_capacity(mmc, part_num);
|
|
mmc_get_blk_desc(mmc)->hwpart = part_num;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
int mmc_hwpart_config(struct mmc *mmc,
|
|
const struct mmc_hwpart_conf *conf,
|
|
enum mmc_hwpart_conf_mode mode)
|
|
{
|
|
u8 part_attrs = 0;
|
|
u32 enh_size_mult;
|
|
u32 enh_start_addr;
|
|
u32 gp_size_mult[4];
|
|
u32 max_enh_size_mult;
|
|
u32 tot_enh_size_mult = 0;
|
|
u8 wr_rel_set;
|
|
int i, pidx, err;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
|
|
if (mode < MMC_HWPART_CONF_CHECK || mode > MMC_HWPART_CONF_COMPLETE)
|
|
return -EINVAL;
|
|
|
|
if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
|
|
pr_err("eMMC >= 4.4 required for enhanced user data area\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
if (!(mmc->part_support & PART_SUPPORT)) {
|
|
pr_err("Card does not support partitioning\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
if (!mmc->hc_wp_grp_size) {
|
|
pr_err("Card does not define HC WP group size\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
/* check partition alignment and total enhanced size */
|
|
if (conf->user.enh_size) {
|
|
if (conf->user.enh_size % mmc->hc_wp_grp_size ||
|
|
conf->user.enh_start % mmc->hc_wp_grp_size) {
|
|
pr_err("User data enhanced area not HC WP group "
|
|
"size aligned\n");
|
|
return -EINVAL;
|
|
}
|
|
part_attrs |= EXT_CSD_ENH_USR;
|
|
enh_size_mult = conf->user.enh_size / mmc->hc_wp_grp_size;
|
|
if (mmc->high_capacity) {
|
|
enh_start_addr = conf->user.enh_start;
|
|
} else {
|
|
enh_start_addr = (conf->user.enh_start << 9);
|
|
}
|
|
} else {
|
|
enh_size_mult = 0;
|
|
enh_start_addr = 0;
|
|
}
|
|
tot_enh_size_mult += enh_size_mult;
|
|
|
|
for (pidx = 0; pidx < 4; pidx++) {
|
|
if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
|
|
pr_err("GP%i partition not HC WP group size "
|
|
"aligned\n", pidx+1);
|
|
return -EINVAL;
|
|
}
|
|
gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
|
|
if (conf->gp_part[pidx].size && conf->gp_part[pidx].enhanced) {
|
|
part_attrs |= EXT_CSD_ENH_GP(pidx);
|
|
tot_enh_size_mult += gp_size_mult[pidx];
|
|
}
|
|
}
|
|
|
|
if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
|
|
pr_err("Card does not support enhanced attribute\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
err = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (err)
|
|
return err;
|
|
|
|
max_enh_size_mult =
|
|
(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+2] << 16) +
|
|
(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
|
|
ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
|
|
if (tot_enh_size_mult > max_enh_size_mult) {
|
|
pr_err("Total enhanced size exceeds maximum (%u > %u)\n",
|
|
tot_enh_size_mult, max_enh_size_mult);
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
/* The default value of EXT_CSD_WR_REL_SET is device
|
|
* dependent, the values can only be changed if the
|
|
* EXT_CSD_HS_CTRL_REL bit is set. The values can be
|
|
* changed only once and before partitioning is completed. */
|
|
wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
|
|
if (conf->user.wr_rel_change) {
|
|
if (conf->user.wr_rel_set)
|
|
wr_rel_set |= EXT_CSD_WR_DATA_REL_USR;
|
|
else
|
|
wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR;
|
|
}
|
|
for (pidx = 0; pidx < 4; pidx++) {
|
|
if (conf->gp_part[pidx].wr_rel_change) {
|
|
if (conf->gp_part[pidx].wr_rel_set)
|
|
wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx);
|
|
else
|
|
wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx);
|
|
}
|
|
}
|
|
|
|
if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] &&
|
|
!(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
|
|
puts("Card does not support host controlled partition write "
|
|
"reliability settings\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
if (ext_csd[EXT_CSD_PARTITION_SETTING] &
|
|
EXT_CSD_PARTITION_SETTING_COMPLETED) {
|
|
pr_err("Card already partitioned\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
if (mode == MMC_HWPART_CONF_CHECK)
|
|
return 0;
|
|
|
|
/* Partitioning requires high-capacity size definitions */
|
|
if (!(ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01)) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_ERASE_GROUP_DEF, 1);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
/* update erase group size to be high-capacity */
|
|
mmc->erase_grp_size =
|
|
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
|
|
#endif
|
|
|
|
}
|
|
|
|
/* all OK, write the configuration */
|
|
for (i = 0; i < 4; i++) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_ENH_START_ADDR+i,
|
|
(enh_start_addr >> (i*8)) & 0xFF);
|
|
if (err)
|
|
return err;
|
|
}
|
|
for (i = 0; i < 3; i++) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_ENH_SIZE_MULT+i,
|
|
(enh_size_mult >> (i*8)) & 0xFF);
|
|
if (err)
|
|
return err;
|
|
}
|
|
for (pidx = 0; pidx < 4; pidx++) {
|
|
for (i = 0; i < 3; i++) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_GP_SIZE_MULT+pidx*3+i,
|
|
(gp_size_mult[pidx] >> (i*8)) & 0xFF);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_PARTITIONS_ATTRIBUTE, part_attrs);
|
|
if (err)
|
|
return err;
|
|
|
|
if (mode == MMC_HWPART_CONF_SET)
|
|
return 0;
|
|
|
|
/* The WR_REL_SET is a write-once register but shall be
|
|
* written before setting PART_SETTING_COMPLETED. As it is
|
|
* write-once we can only write it when completing the
|
|
* partitioning. */
|
|
if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_WR_REL_SET, wr_rel_set);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Setting PART_SETTING_COMPLETED confirms the partition
|
|
* configuration but it only becomes effective after power
|
|
* cycle, so we do not adjust the partition related settings
|
|
* in the mmc struct. */
|
|
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_PARTITION_SETTING,
|
|
EXT_CSD_PARTITION_SETTING_COMPLETED);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
int mmc_getcd(struct mmc *mmc)
|
|
{
|
|
int cd;
|
|
|
|
cd = board_mmc_getcd(mmc);
|
|
|
|
if (cd < 0) {
|
|
if (mmc->cfg->ops->getcd)
|
|
cd = mmc->cfg->ops->getcd(mmc);
|
|
else
|
|
cd = 1;
|
|
}
|
|
|
|
return cd;
|
|
}
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(MMC_TINY)
|
|
static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
struct mmc_data data;
|
|
|
|
/* Switch the frequency */
|
|
cmd.cmdidx = SD_CMD_SWITCH_FUNC;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = (mode << 31) | 0xffffff;
|
|
cmd.cmdarg &= ~(0xf << (group * 4));
|
|
cmd.cmdarg |= value << (group * 4);
|
|
|
|
data.dest = (char *)resp;
|
|
data.blocksize = 64;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
return mmc_send_cmd(mmc, &cmd, &data);
|
|
}
|
|
|
|
static int sd_get_capabilities(struct mmc *mmc)
|
|
{
|
|
int err;
|
|
struct mmc_cmd cmd;
|
|
ALLOC_CACHE_ALIGN_BUFFER(__be32, scr, 2);
|
|
ALLOC_CACHE_ALIGN_BUFFER(__be32, switch_status, 16);
|
|
struct mmc_data data;
|
|
int timeout;
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
u32 sd3_bus_mode;
|
|
#endif
|
|
|
|
mmc->card_caps = MMC_MODE_1BIT | MMC_CAP(MMC_LEGACY);
|
|
|
|
if (mmc_host_is_spi(mmc))
|
|
return 0;
|
|
|
|
/* Read the SCR to find out if this card supports higher speeds */
|
|
cmd.cmdidx = MMC_CMD_APP_CMD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
cmd.cmdidx = SD_CMD_APP_SEND_SCR;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 0;
|
|
|
|
data.dest = (char *)scr;
|
|
data.blocksize = 8;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
err = mmc_send_cmd_retry(mmc, &cmd, &data, 3);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
mmc->scr[0] = __be32_to_cpu(scr[0]);
|
|
mmc->scr[1] = __be32_to_cpu(scr[1]);
|
|
|
|
switch ((mmc->scr[0] >> 24) & 0xf) {
|
|
case 0:
|
|
mmc->version = SD_VERSION_1_0;
|
|
break;
|
|
case 1:
|
|
mmc->version = SD_VERSION_1_10;
|
|
break;
|
|
case 2:
|
|
mmc->version = SD_VERSION_2;
|
|
if ((mmc->scr[0] >> 15) & 0x1)
|
|
mmc->version = SD_VERSION_3;
|
|
break;
|
|
default:
|
|
mmc->version = SD_VERSION_1_0;
|
|
break;
|
|
}
|
|
|
|
if (mmc->scr[0] & SD_DATA_4BIT)
|
|
mmc->card_caps |= MMC_MODE_4BIT;
|
|
|
|
/* Version 1.0 doesn't support switching */
|
|
if (mmc->version == SD_VERSION_1_0)
|
|
return 0;
|
|
|
|
timeout = 4;
|
|
while (timeout--) {
|
|
err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1,
|
|
(u8 *)switch_status);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
/* The high-speed function is busy. Try again */
|
|
if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY))
|
|
break;
|
|
}
|
|
|
|
/* If high-speed isn't supported, we return */
|
|
if (__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)
|
|
mmc->card_caps |= MMC_CAP(SD_HS);
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
/* Version before 3.0 don't support UHS modes */
|
|
if (mmc->version < SD_VERSION_3)
|
|
return 0;
|
|
|
|
sd3_bus_mode = __be32_to_cpu(switch_status[3]) >> 16 & 0x1f;
|
|
if (sd3_bus_mode & SD_MODE_UHS_SDR104)
|
|
mmc->card_caps |= MMC_CAP(UHS_SDR104);
|
|
if (sd3_bus_mode & SD_MODE_UHS_SDR50)
|
|
mmc->card_caps |= MMC_CAP(UHS_SDR50);
|
|
if (sd3_bus_mode & SD_MODE_UHS_SDR25)
|
|
mmc->card_caps |= MMC_CAP(UHS_SDR25);
|
|
if (sd3_bus_mode & SD_MODE_UHS_SDR12)
|
|
mmc->card_caps |= MMC_CAP(UHS_SDR12);
|
|
if (sd3_bus_mode & SD_MODE_UHS_DDR50)
|
|
mmc->card_caps |= MMC_CAP(UHS_DDR50);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sd_set_card_speed(struct mmc *mmc, enum bus_mode mode)
|
|
{
|
|
int err;
|
|
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16);
|
|
int speed;
|
|
|
|
/* SD version 1.00 and 1.01 does not support CMD 6 */
|
|
if (mmc->version == SD_VERSION_1_0)
|
|
return 0;
|
|
|
|
switch (mode) {
|
|
case MMC_LEGACY:
|
|
speed = UHS_SDR12_BUS_SPEED;
|
|
break;
|
|
case SD_HS:
|
|
speed = HIGH_SPEED_BUS_SPEED;
|
|
break;
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
case UHS_SDR12:
|
|
speed = UHS_SDR12_BUS_SPEED;
|
|
break;
|
|
case UHS_SDR25:
|
|
speed = UHS_SDR25_BUS_SPEED;
|
|
break;
|
|
case UHS_SDR50:
|
|
speed = UHS_SDR50_BUS_SPEED;
|
|
break;
|
|
case UHS_DDR50:
|
|
speed = UHS_DDR50_BUS_SPEED;
|
|
break;
|
|
case UHS_SDR104:
|
|
speed = UHS_SDR104_BUS_SPEED;
|
|
break;
|
|
#endif
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, speed, (u8 *)switch_status);
|
|
if (err)
|
|
return err;
|
|
|
|
if (((__be32_to_cpu(switch_status[4]) >> 24) & 0xF) != speed)
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sd_select_bus_width(struct mmc *mmc, int w)
|
|
{
|
|
int err;
|
|
struct mmc_cmd cmd;
|
|
|
|
if ((w != 4) && (w != 1))
|
|
return -EINVAL;
|
|
|
|
cmd.cmdidx = MMC_CMD_APP_CMD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
if (w == 4)
|
|
cmd.cmdarg = 2;
|
|
else if (w == 1)
|
|
cmd.cmdarg = 0;
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
static int sd_read_ssr(struct mmc *mmc)
|
|
{
|
|
static const unsigned int sd_au_size[] = {
|
|
0, SZ_16K / 512, SZ_32K / 512,
|
|
SZ_64K / 512, SZ_128K / 512, SZ_256K / 512,
|
|
SZ_512K / 512, SZ_1M / 512, SZ_2M / 512,
|
|
SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512,
|
|
SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512,
|
|
SZ_64M / 512,
|
|
};
|
|
int err, i;
|
|
struct mmc_cmd cmd;
|
|
ALLOC_CACHE_ALIGN_BUFFER(uint, ssr, 16);
|
|
struct mmc_data data;
|
|
unsigned int au, eo, et, es;
|
|
|
|
cmd.cmdidx = MMC_CMD_APP_CMD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
|
|
err = mmc_send_cmd_quirks(mmc, &cmd, NULL, MMC_QUIRK_RETRY_APP_CMD, 4);
|
|
if (err)
|
|
return err;
|
|
|
|
cmd.cmdidx = SD_CMD_APP_SD_STATUS;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 0;
|
|
|
|
data.dest = (char *)ssr;
|
|
data.blocksize = 64;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
err = mmc_send_cmd_retry(mmc, &cmd, &data, 3);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
ssr[i] = be32_to_cpu(ssr[i]);
|
|
|
|
au = (ssr[2] >> 12) & 0xF;
|
|
if ((au <= 9) || (mmc->version == SD_VERSION_3)) {
|
|
mmc->ssr.au = sd_au_size[au];
|
|
es = (ssr[3] >> 24) & 0xFF;
|
|
es |= (ssr[2] & 0xFF) << 8;
|
|
et = (ssr[3] >> 18) & 0x3F;
|
|
if (es && et) {
|
|
eo = (ssr[3] >> 16) & 0x3;
|
|
mmc->ssr.erase_timeout = (et * 1000) / es;
|
|
mmc->ssr.erase_offset = eo * 1000;
|
|
}
|
|
} else {
|
|
pr_debug("Invalid Allocation Unit Size.\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
/* frequency bases */
|
|
/* divided by 10 to be nice to platforms without floating point */
|
|
static const int fbase[] = {
|
|
10000,
|
|
100000,
|
|
1000000,
|
|
10000000,
|
|
};
|
|
|
|
/* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice
|
|
* to platforms without floating point.
|
|
*/
|
|
static const u8 multipliers[] = {
|
|
0, /* reserved */
|
|
10,
|
|
12,
|
|
13,
|
|
15,
|
|
20,
|
|
25,
|
|
30,
|
|
35,
|
|
40,
|
|
45,
|
|
50,
|
|
55,
|
|
60,
|
|
70,
|
|
80,
|
|
};
|
|
|
|
static inline int bus_width(uint cap)
|
|
{
|
|
if (cap == MMC_MODE_8BIT)
|
|
return 8;
|
|
if (cap == MMC_MODE_4BIT)
|
|
return 4;
|
|
if (cap == MMC_MODE_1BIT)
|
|
return 1;
|
|
pr_warn("invalid bus witdh capability 0x%x\n", cap);
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
static int mmc_execute_tuning(struct mmc *mmc, uint opcode)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
#endif
|
|
|
|
static int mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (mmc->cfg->ops->set_ios)
|
|
ret = mmc->cfg->ops->set_ios(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_host_power_cycle(struct mmc *mmc)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (mmc->cfg->ops->host_power_cycle)
|
|
ret = mmc->cfg->ops->host_power_cycle(mmc);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
int mmc_set_clock(struct mmc *mmc, uint clock, bool disable)
|
|
{
|
|
if (!disable) {
|
|
if (clock > mmc->cfg->f_max)
|
|
clock = mmc->cfg->f_max;
|
|
|
|
if (clock < mmc->cfg->f_min)
|
|
clock = mmc->cfg->f_min;
|
|
}
|
|
|
|
mmc->clock = clock;
|
|
mmc->clk_disable = disable;
|
|
|
|
debug("clock is %s (%dHz)\n", disable ? "disabled" : "enabled", clock);
|
|
|
|
return mmc_set_ios(mmc);
|
|
}
|
|
|
|
static int mmc_set_bus_width(struct mmc *mmc, uint width)
|
|
{
|
|
mmc->bus_width = width;
|
|
|
|
return mmc_set_ios(mmc);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_VERBOSE) || defined(DEBUG)
|
|
/*
|
|
* helper function to display the capabilities in a human
|
|
* friendly manner. The capabilities include bus width and
|
|
* supported modes.
|
|
*/
|
|
void mmc_dump_capabilities(const char *text, uint caps)
|
|
{
|
|
enum bus_mode mode;
|
|
|
|
pr_debug("%s: widths [", text);
|
|
if (caps & MMC_MODE_8BIT)
|
|
pr_debug("8, ");
|
|
if (caps & MMC_MODE_4BIT)
|
|
pr_debug("4, ");
|
|
if (caps & MMC_MODE_1BIT)
|
|
pr_debug("1, ");
|
|
pr_debug("\b\b] modes [");
|
|
for (mode = MMC_LEGACY; mode < MMC_MODES_END; mode++)
|
|
if (MMC_CAP(mode) & caps)
|
|
pr_debug("%s, ", mmc_mode_name(mode));
|
|
pr_debug("\b\b]\n");
|
|
}
|
|
#endif
|
|
|
|
struct mode_width_tuning {
|
|
enum bus_mode mode;
|
|
uint widths;
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
uint tuning;
|
|
#endif
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
|
|
int mmc_voltage_to_mv(enum mmc_voltage voltage)
|
|
{
|
|
switch (voltage) {
|
|
case MMC_SIGNAL_VOLTAGE_000: return 0;
|
|
case MMC_SIGNAL_VOLTAGE_330: return 3300;
|
|
case MMC_SIGNAL_VOLTAGE_180: return 1800;
|
|
case MMC_SIGNAL_VOLTAGE_120: return 1200;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage)
|
|
{
|
|
int err;
|
|
|
|
if (mmc->signal_voltage == signal_voltage)
|
|
return 0;
|
|
|
|
mmc->signal_voltage = signal_voltage;
|
|
err = mmc_set_ios(mmc);
|
|
if (err)
|
|
pr_debug("unable to set voltage (err %d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
#else
|
|
static inline int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(MMC_TINY)
|
|
static const struct mode_width_tuning sd_modes_by_pref[] = {
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
{
|
|
.mode = UHS_SDR104,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
.tuning = MMC_CMD_SEND_TUNING_BLOCK
|
|
},
|
|
#endif
|
|
{
|
|
.mode = UHS_SDR50,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
{
|
|
.mode = UHS_DDR50,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
{
|
|
.mode = UHS_SDR25,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
#endif
|
|
{
|
|
.mode = SD_HS,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
{
|
|
.mode = UHS_SDR12,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
#endif
|
|
{
|
|
.mode = MMC_LEGACY,
|
|
.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
}
|
|
};
|
|
|
|
#define for_each_sd_mode_by_pref(caps, mwt) \
|
|
for (mwt = sd_modes_by_pref;\
|
|
mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
|
|
mwt++) \
|
|
if (caps & MMC_CAP(mwt->mode))
|
|
|
|
static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps)
|
|
{
|
|
int err;
|
|
uint widths[] = {MMC_MODE_4BIT, MMC_MODE_1BIT};
|
|
const struct mode_width_tuning *mwt;
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
bool uhs_en = (mmc->ocr & OCR_S18R) ? true : false;
|
|
#else
|
|
bool uhs_en = false;
|
|
#endif
|
|
uint caps;
|
|
|
|
#ifdef DEBUG
|
|
mmc_dump_capabilities("sd card", card_caps);
|
|
mmc_dump_capabilities("host", mmc->host_caps);
|
|
#endif
|
|
|
|
if (mmc_host_is_spi(mmc)) {
|
|
mmc_set_bus_width(mmc, 1);
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE);
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
err = sd_read_ssr(mmc);
|
|
if (err)
|
|
pr_warn("unable to read ssr\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* Restrict card's capabilities by what the host can do */
|
|
caps = card_caps & mmc->host_caps;
|
|
|
|
if (!uhs_en)
|
|
caps &= ~UHS_CAPS;
|
|
|
|
for_each_sd_mode_by_pref(caps, mwt) {
|
|
uint *w;
|
|
|
|
for (w = widths; w < widths + ARRAY_SIZE(widths); w++) {
|
|
if (*w & caps & mwt->widths) {
|
|
pr_debug("trying mode %s width %d (at %d MHz)\n",
|
|
mmc_mode_name(mwt->mode),
|
|
bus_width(*w),
|
|
mmc_mode2freq(mmc, mwt->mode) / 1000000);
|
|
|
|
/* configure the bus width (card + host) */
|
|
err = sd_select_bus_width(mmc, bus_width(*w));
|
|
if (err)
|
|
goto error;
|
|
mmc_set_bus_width(mmc, bus_width(*w));
|
|
|
|
/* configure the bus mode (card) */
|
|
err = sd_set_card_speed(mmc, mwt->mode);
|
|
if (err)
|
|
goto error;
|
|
|
|
/* configure the bus mode (host) */
|
|
mmc_select_mode(mmc, mwt->mode);
|
|
mmc_set_clock(mmc, mmc->tran_speed,
|
|
MMC_CLK_ENABLE);
|
|
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
/* execute tuning if needed */
|
|
if (mwt->tuning && !mmc_host_is_spi(mmc)) {
|
|
err = mmc_execute_tuning(mmc,
|
|
mwt->tuning);
|
|
if (err) {
|
|
pr_debug("tuning failed\n");
|
|
goto error;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
err = sd_read_ssr(mmc);
|
|
if (err)
|
|
pr_warn("unable to read ssr\n");
|
|
#endif
|
|
if (!err)
|
|
return 0;
|
|
|
|
error:
|
|
/* revert to a safer bus speed */
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_clock(mmc, mmc->tran_speed,
|
|
MMC_CLK_ENABLE);
|
|
}
|
|
}
|
|
}
|
|
|
|
pr_err("unable to select a mode\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* read the compare the part of ext csd that is constant.
|
|
* This can be used to check that the transfer is working
|
|
* as expected.
|
|
*/
|
|
static int mmc_read_and_compare_ext_csd(struct mmc *mmc)
|
|
{
|
|
int err;
|
|
const u8 *ext_csd = mmc->ext_csd;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
|
|
|
|
if (mmc->version < MMC_VERSION_4)
|
|
return 0;
|
|
|
|
err = mmc_send_ext_csd(mmc, test_csd);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Only compare read only fields */
|
|
if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
|
|
== test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
|
|
ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
|
|
== test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
|
|
ext_csd[EXT_CSD_REV]
|
|
== test_csd[EXT_CSD_REV] &&
|
|
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
|
|
== test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
|
|
memcmp(&ext_csd[EXT_CSD_SEC_CNT],
|
|
&test_csd[EXT_CSD_SEC_CNT], 4) == 0)
|
|
return 0;
|
|
|
|
return -EBADMSG;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
|
|
static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
|
|
uint32_t allowed_mask)
|
|
{
|
|
u32 card_mask = 0;
|
|
|
|
switch (mode) {
|
|
case MMC_HS_400_ES:
|
|
case MMC_HS_400:
|
|
case MMC_HS_200:
|
|
if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V |
|
|
EXT_CSD_CARD_TYPE_HS400_1_8V))
|
|
card_mask |= MMC_SIGNAL_VOLTAGE_180;
|
|
if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V |
|
|
EXT_CSD_CARD_TYPE_HS400_1_2V))
|
|
card_mask |= MMC_SIGNAL_VOLTAGE_120;
|
|
break;
|
|
case MMC_DDR_52:
|
|
if (mmc->cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
|
|
card_mask |= MMC_SIGNAL_VOLTAGE_330 |
|
|
MMC_SIGNAL_VOLTAGE_180;
|
|
if (mmc->cardtype & EXT_CSD_CARD_TYPE_DDR_1_2V)
|
|
card_mask |= MMC_SIGNAL_VOLTAGE_120;
|
|
break;
|
|
default:
|
|
card_mask |= MMC_SIGNAL_VOLTAGE_330;
|
|
break;
|
|
}
|
|
|
|
while (card_mask & allowed_mask) {
|
|
enum mmc_voltage best_match;
|
|
|
|
best_match = 1 << (ffs(card_mask & allowed_mask) - 1);
|
|
if (!mmc_set_signal_voltage(mmc, best_match))
|
|
return 0;
|
|
|
|
allowed_mask &= ~best_match;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
#else
|
|
static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
|
|
uint32_t allowed_mask)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct mode_width_tuning mmc_modes_by_pref[] = {
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
{
|
|
.mode = MMC_HS_400_ES,
|
|
.widths = MMC_MODE_8BIT,
|
|
},
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
{
|
|
.mode = MMC_HS_400,
|
|
.widths = MMC_MODE_8BIT,
|
|
.tuning = MMC_CMD_SEND_TUNING_BLOCK_HS200
|
|
},
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
|
|
{
|
|
.mode = MMC_HS_200,
|
|
.widths = MMC_MODE_8BIT | MMC_MODE_4BIT,
|
|
.tuning = MMC_CMD_SEND_TUNING_BLOCK_HS200
|
|
},
|
|
#endif
|
|
{
|
|
.mode = MMC_DDR_52,
|
|
.widths = MMC_MODE_8BIT | MMC_MODE_4BIT,
|
|
},
|
|
{
|
|
.mode = MMC_HS_52,
|
|
.widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
{
|
|
.mode = MMC_HS,
|
|
.widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
},
|
|
{
|
|
.mode = MMC_LEGACY,
|
|
.widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
|
|
}
|
|
};
|
|
|
|
#define for_each_mmc_mode_by_pref(caps, mwt) \
|
|
for (mwt = mmc_modes_by_pref;\
|
|
mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
|
|
mwt++) \
|
|
if (caps & MMC_CAP(mwt->mode))
|
|
|
|
static const struct ext_csd_bus_width {
|
|
uint cap;
|
|
bool is_ddr;
|
|
uint ext_csd_bits;
|
|
} ext_csd_bus_width[] = {
|
|
{MMC_MODE_8BIT, true, EXT_CSD_DDR_BUS_WIDTH_8},
|
|
{MMC_MODE_4BIT, true, EXT_CSD_DDR_BUS_WIDTH_4},
|
|
{MMC_MODE_8BIT, false, EXT_CSD_BUS_WIDTH_8},
|
|
{MMC_MODE_4BIT, false, EXT_CSD_BUS_WIDTH_4},
|
|
{MMC_MODE_1BIT, false, EXT_CSD_BUS_WIDTH_1},
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
static int mmc_select_hs400(struct mmc *mmc)
|
|
{
|
|
int err;
|
|
|
|
/* Set timing to HS200 for tuning */
|
|
err = mmc_set_card_speed(mmc, MMC_HS_200, false);
|
|
if (err)
|
|
return err;
|
|
|
|
/* configure the bus mode (host) */
|
|
mmc_select_mode(mmc, MMC_HS_200);
|
|
mmc_set_clock(mmc, mmc->tran_speed, false);
|
|
|
|
/* execute tuning if needed */
|
|
mmc->hs400_tuning = 1;
|
|
err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200);
|
|
mmc->hs400_tuning = 0;
|
|
if (err) {
|
|
debug("tuning failed\n");
|
|
return err;
|
|
}
|
|
|
|
/* Set back to HS */
|
|
mmc_set_card_speed(mmc, MMC_HS, true);
|
|
|
|
err = mmc_hs400_prepare_ddr(mmc);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
|
|
EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mmc_set_card_speed(mmc, MMC_HS_400, false);
|
|
if (err)
|
|
return err;
|
|
|
|
mmc_select_mode(mmc, MMC_HS_400);
|
|
err = mmc_set_clock(mmc, mmc->tran_speed, false);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int mmc_select_hs400(struct mmc *mmc)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int mmc_set_enhanced_strobe(struct mmc *mmc)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
#endif
|
|
static int mmc_select_hs400es(struct mmc *mmc)
|
|
{
|
|
int err;
|
|
|
|
err = mmc_set_card_speed(mmc, MMC_HS, true);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
|
|
EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG |
|
|
EXT_CSD_BUS_WIDTH_STROBE);
|
|
if (err) {
|
|
printf("switch to bus width for hs400 failed\n");
|
|
return err;
|
|
}
|
|
/* TODO: driver strength */
|
|
err = mmc_set_card_speed(mmc, MMC_HS_400_ES, false);
|
|
if (err)
|
|
return err;
|
|
|
|
mmc_select_mode(mmc, MMC_HS_400_ES);
|
|
err = mmc_set_clock(mmc, mmc->tran_speed, false);
|
|
if (err)
|
|
return err;
|
|
|
|
return mmc_set_enhanced_strobe(mmc);
|
|
}
|
|
#else
|
|
static int mmc_select_hs400es(struct mmc *mmc)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
#endif
|
|
|
|
#define for_each_supported_width(caps, ddr, ecbv) \
|
|
for (ecbv = ext_csd_bus_width;\
|
|
ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
|
|
ecbv++) \
|
|
if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))
|
|
|
|
static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
|
|
{
|
|
int err = 0;
|
|
const struct mode_width_tuning *mwt;
|
|
const struct ext_csd_bus_width *ecbw;
|
|
|
|
#ifdef DEBUG
|
|
mmc_dump_capabilities("mmc", card_caps);
|
|
mmc_dump_capabilities("host", mmc->host_caps);
|
|
#endif
|
|
|
|
if (mmc_host_is_spi(mmc)) {
|
|
mmc_set_bus_width(mmc, 1);
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE);
|
|
return 0;
|
|
}
|
|
|
|
/* Restrict card's capabilities by what the host can do */
|
|
card_caps &= mmc->host_caps;
|
|
|
|
/* Only version 4 of MMC supports wider bus widths */
|
|
if (mmc->version < MMC_VERSION_4)
|
|
return 0;
|
|
|
|
if (!mmc->ext_csd) {
|
|
pr_debug("No ext_csd found!\n"); /* this should enver happen */
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
|
|
/*
|
|
* In case the eMMC is in HS200/HS400 mode, downgrade to HS mode
|
|
* before doing anything else, since a transition from either of
|
|
* the HS200/HS400 mode directly to legacy mode is not supported.
|
|
*/
|
|
if (mmc->selected_mode == MMC_HS_200 ||
|
|
mmc->selected_mode == MMC_HS_400 ||
|
|
mmc->selected_mode == MMC_HS_400_ES)
|
|
mmc_set_card_speed(mmc, MMC_HS, true);
|
|
else
|
|
#endif
|
|
mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE);
|
|
|
|
for_each_mmc_mode_by_pref(card_caps, mwt) {
|
|
for_each_supported_width(card_caps & mwt->widths,
|
|
mmc_is_mode_ddr(mwt->mode), ecbw) {
|
|
enum mmc_voltage old_voltage;
|
|
pr_debug("trying mode %s width %d (at %d MHz)\n",
|
|
mmc_mode_name(mwt->mode),
|
|
bus_width(ecbw->cap),
|
|
mmc_mode2freq(mmc, mwt->mode) / 1000000);
|
|
old_voltage = mmc->signal_voltage;
|
|
err = mmc_set_lowest_voltage(mmc, mwt->mode,
|
|
MMC_ALL_SIGNAL_VOLTAGE);
|
|
if (err)
|
|
continue;
|
|
|
|
/* configure the bus width (card + host) */
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_BUS_WIDTH,
|
|
ecbw->ext_csd_bits & ~EXT_CSD_DDR_FLAG);
|
|
if (err)
|
|
goto error;
|
|
mmc_set_bus_width(mmc, bus_width(ecbw->cap));
|
|
|
|
if (mwt->mode == MMC_HS_400) {
|
|
err = mmc_select_hs400(mmc);
|
|
if (err) {
|
|
printf("Select HS400 failed %d\n", err);
|
|
goto error;
|
|
}
|
|
} else if (mwt->mode == MMC_HS_400_ES) {
|
|
err = mmc_select_hs400es(mmc);
|
|
if (err) {
|
|
printf("Select HS400ES failed %d\n",
|
|
err);
|
|
goto error;
|
|
}
|
|
} else {
|
|
/* configure the bus speed (card) */
|
|
err = mmc_set_card_speed(mmc, mwt->mode, false);
|
|
if (err)
|
|
goto error;
|
|
|
|
/*
|
|
* configure the bus width AND the ddr mode
|
|
* (card). The host side will be taken care
|
|
* of in the next step
|
|
*/
|
|
if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) {
|
|
err = mmc_switch(mmc,
|
|
EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_BUS_WIDTH,
|
|
ecbw->ext_csd_bits);
|
|
if (err)
|
|
goto error;
|
|
}
|
|
|
|
/* configure the bus mode (host) */
|
|
mmc_select_mode(mmc, mwt->mode);
|
|
mmc_set_clock(mmc, mmc->tran_speed,
|
|
MMC_CLK_ENABLE);
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
|
|
/* execute tuning if needed */
|
|
if (mwt->tuning) {
|
|
err = mmc_execute_tuning(mmc,
|
|
mwt->tuning);
|
|
if (err) {
|
|
pr_debug("tuning failed : %d\n", err);
|
|
goto error;
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* do a transfer to check the configuration */
|
|
err = mmc_read_and_compare_ext_csd(mmc);
|
|
if (!err)
|
|
return 0;
|
|
error:
|
|
mmc_set_signal_voltage(mmc, old_voltage);
|
|
/* if an error occurred, revert to a safer bus mode */
|
|
mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_1);
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE);
|
|
mmc_set_bus_width(mmc, 1);
|
|
}
|
|
}
|
|
|
|
pr_err("unable to select a mode : %d\n", err);
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_TINY)
|
|
DEFINE_CACHE_ALIGN_BUFFER(u8, ext_csd_bkup, MMC_MAX_BLOCK_LEN);
|
|
#endif
|
|
|
|
static int mmc_startup_v4(struct mmc *mmc)
|
|
{
|
|
int err, i;
|
|
u64 capacity;
|
|
bool has_parts = false;
|
|
bool part_completed;
|
|
static const u32 mmc_versions[] = {
|
|
MMC_VERSION_4,
|
|
MMC_VERSION_4_1,
|
|
MMC_VERSION_4_2,
|
|
MMC_VERSION_4_3,
|
|
MMC_VERSION_4_4,
|
|
MMC_VERSION_4_41,
|
|
MMC_VERSION_4_5,
|
|
MMC_VERSION_5_0,
|
|
MMC_VERSION_5_1
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_TINY)
|
|
u8 *ext_csd = ext_csd_bkup;
|
|
|
|
if (IS_SD(mmc) || mmc->version < MMC_VERSION_4)
|
|
return 0;
|
|
|
|
if (!mmc->ext_csd)
|
|
memset(ext_csd_bkup, 0, MMC_MAX_BLOCK_LEN);
|
|
|
|
err = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (err)
|
|
goto error;
|
|
|
|
/* store the ext csd for future reference */
|
|
if (!mmc->ext_csd)
|
|
mmc->ext_csd = ext_csd;
|
|
#else
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
|
|
if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4))
|
|
return 0;
|
|
|
|
/* check ext_csd version and capacity */
|
|
err = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (err)
|
|
goto error;
|
|
|
|
/* store the ext csd for future reference */
|
|
if (!mmc->ext_csd)
|
|
mmc->ext_csd = malloc(MMC_MAX_BLOCK_LEN);
|
|
if (!mmc->ext_csd)
|
|
return -ENOMEM;
|
|
memcpy(mmc->ext_csd, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
#endif
|
|
if (ext_csd[EXT_CSD_REV] >= ARRAY_SIZE(mmc_versions))
|
|
return -EINVAL;
|
|
|
|
mmc->version = mmc_versions[ext_csd[EXT_CSD_REV]];
|
|
|
|
if (mmc->version >= MMC_VERSION_4_2) {
|
|
/*
|
|
* According to the JEDEC Standard, the value of
|
|
* ext_csd's capacity is valid if the value is more
|
|
* than 2GB
|
|
*/
|
|
capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
|
|
| ext_csd[EXT_CSD_SEC_CNT + 1] << 8
|
|
| ext_csd[EXT_CSD_SEC_CNT + 2] << 16
|
|
| ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
|
|
capacity *= MMC_MAX_BLOCK_LEN;
|
|
if ((capacity >> 20) > 2 * 1024)
|
|
mmc->capacity_user = capacity;
|
|
}
|
|
|
|
if (mmc->version >= MMC_VERSION_4_5)
|
|
mmc->gen_cmd6_time = ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
|
|
|
|
/* The partition data may be non-zero but it is only
|
|
* effective if PARTITION_SETTING_COMPLETED is set in
|
|
* EXT_CSD, so ignore any data if this bit is not set,
|
|
* except for enabling the high-capacity group size
|
|
* definition (see below).
|
|
*/
|
|
part_completed = !!(ext_csd[EXT_CSD_PARTITION_SETTING] &
|
|
EXT_CSD_PARTITION_SETTING_COMPLETED);
|
|
|
|
mmc->part_switch_time = ext_csd[EXT_CSD_PART_SWITCH_TIME];
|
|
/* Some eMMC set the value too low so set a minimum */
|
|
if (mmc->part_switch_time < MMC_MIN_PART_SWITCH_TIME && mmc->part_switch_time)
|
|
mmc->part_switch_time = MMC_MIN_PART_SWITCH_TIME;
|
|
|
|
/* store the partition info of emmc */
|
|
mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
|
|
if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
|
|
ext_csd[EXT_CSD_BOOT_MULT])
|
|
mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
|
|
if (part_completed &&
|
|
(ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT))
|
|
mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
|
|
|
|
mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
|
|
|
|
mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
|
|
uint mult = (ext_csd[idx + 2] << 16) +
|
|
(ext_csd[idx + 1] << 8) + ext_csd[idx];
|
|
if (mult)
|
|
has_parts = true;
|
|
if (!part_completed)
|
|
continue;
|
|
mmc->capacity_gp[i] = mult;
|
|
mmc->capacity_gp[i] *=
|
|
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
|
|
mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
mmc->capacity_gp[i] <<= 19;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
if (part_completed) {
|
|
mmc->enh_user_size =
|
|
(ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) +
|
|
(ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
|
|
ext_csd[EXT_CSD_ENH_SIZE_MULT];
|
|
mmc->enh_user_size *= ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
|
|
mmc->enh_user_size *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
mmc->enh_user_size <<= 19;
|
|
mmc->enh_user_start =
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24) +
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
|
|
ext_csd[EXT_CSD_ENH_START_ADDR];
|
|
if (mmc->high_capacity)
|
|
mmc->enh_user_start <<= 9;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Host needs to enable ERASE_GRP_DEF bit if device is
|
|
* partitioned. This bit will be lost every time after a reset
|
|
* or power off. This will affect erase size.
|
|
*/
|
|
if (part_completed)
|
|
has_parts = true;
|
|
if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
|
|
(ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB))
|
|
has_parts = true;
|
|
if (has_parts) {
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_ERASE_GROUP_DEF, 1);
|
|
|
|
if (err)
|
|
goto error;
|
|
|
|
ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
|
|
}
|
|
|
|
if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
/* Read out group size from ext_csd */
|
|
mmc->erase_grp_size =
|
|
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
|
|
#endif
|
|
/*
|
|
* if high capacity and partition setting completed
|
|
* SEC_COUNT is valid even if it is smaller than 2 GiB
|
|
* JEDEC Standard JESD84-B45, 6.2.4
|
|
*/
|
|
if (mmc->high_capacity && part_completed) {
|
|
capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
|
|
(ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
|
|
(ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
|
|
(ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
|
|
capacity *= MMC_MAX_BLOCK_LEN;
|
|
mmc->capacity_user = capacity;
|
|
}
|
|
}
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
else {
|
|
/* Calculate the group size from the csd value. */
|
|
int erase_gsz, erase_gmul;
|
|
|
|
erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
|
|
erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
|
|
mmc->erase_grp_size = (erase_gsz + 1)
|
|
* (erase_gmul + 1);
|
|
}
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
mmc->hc_wp_grp_size = 1024
|
|
* ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
|
|
* ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
#endif
|
|
|
|
mmc->wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
|
|
|
|
mmc->can_trim =
|
|
!!(ext_csd[EXT_CSD_SEC_FEATURE] & EXT_CSD_SEC_FEATURE_TRIM_EN);
|
|
|
|
return 0;
|
|
error:
|
|
if (mmc->ext_csd) {
|
|
#if !CONFIG_IS_ENABLED(MMC_TINY)
|
|
free(mmc->ext_csd);
|
|
#endif
|
|
mmc->ext_csd = NULL;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int mmc_startup(struct mmc *mmc)
|
|
{
|
|
int err, i;
|
|
uint mult, freq;
|
|
u64 cmult, csize;
|
|
struct mmc_cmd cmd;
|
|
struct blk_desc *bdesc;
|
|
|
|
#ifdef CONFIG_MMC_SPI_CRC_ON
|
|
if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
|
|
cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = 1;
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
if (err)
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
/* Put the Card in Identify Mode */
|
|
cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID :
|
|
MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */
|
|
cmd.resp_type = MMC_RSP_R2;
|
|
cmd.cmdarg = 0;
|
|
|
|
err = mmc_send_cmd_quirks(mmc, &cmd, NULL, MMC_QUIRK_RETRY_SEND_CID, 4);
|
|
if (err)
|
|
return err;
|
|
|
|
memcpy(mmc->cid, cmd.response, 16);
|
|
|
|
/*
|
|
* For MMC cards, set the Relative Address.
|
|
* For SD cards, get the Relatvie Address.
|
|
* This also puts the cards into Standby State
|
|
*/
|
|
if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
|
|
cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
cmd.resp_type = MMC_RSP_R6;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
if (IS_SD(mmc))
|
|
mmc->rca = (cmd.response[0] >> 16) & 0xffff;
|
|
}
|
|
|
|
/* Get the Card-Specific Data */
|
|
cmd.cmdidx = MMC_CMD_SEND_CSD;
|
|
cmd.resp_type = MMC_RSP_R2;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
mmc->csd[0] = cmd.response[0];
|
|
mmc->csd[1] = cmd.response[1];
|
|
mmc->csd[2] = cmd.response[2];
|
|
mmc->csd[3] = cmd.response[3];
|
|
|
|
if (mmc->version == MMC_VERSION_UNKNOWN) {
|
|
int version = (cmd.response[0] >> 26) & 0xf;
|
|
|
|
switch (version) {
|
|
case 0:
|
|
mmc->version = MMC_VERSION_1_2;
|
|
break;
|
|
case 1:
|
|
mmc->version = MMC_VERSION_1_4;
|
|
break;
|
|
case 2:
|
|
mmc->version = MMC_VERSION_2_2;
|
|
break;
|
|
case 3:
|
|
mmc->version = MMC_VERSION_3;
|
|
break;
|
|
case 4:
|
|
mmc->version = MMC_VERSION_4;
|
|
break;
|
|
default:
|
|
mmc->version = MMC_VERSION_1_2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* divide frequency by 10, since the mults are 10x bigger */
|
|
freq = fbase[(cmd.response[0] & 0x7)];
|
|
mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
|
|
|
|
mmc->legacy_speed = freq * mult;
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
|
|
mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
|
|
mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
|
|
if (IS_SD(mmc))
|
|
mmc->write_bl_len = mmc->read_bl_len;
|
|
else
|
|
mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf);
|
|
#endif
|
|
|
|
if (mmc->high_capacity) {
|
|
csize = (mmc->csd[1] & 0x3f) << 16
|
|
| (mmc->csd[2] & 0xffff0000) >> 16;
|
|
cmult = 8;
|
|
} else {
|
|
csize = (mmc->csd[1] & 0x3ff) << 2
|
|
| (mmc->csd[2] & 0xc0000000) >> 30;
|
|
cmult = (mmc->csd[2] & 0x00038000) >> 15;
|
|
}
|
|
|
|
mmc->capacity_user = (csize + 1) << (cmult + 2);
|
|
mmc->capacity_user *= mmc->read_bl_len;
|
|
mmc->capacity_boot = 0;
|
|
mmc->capacity_rpmb = 0;
|
|
for (i = 0; i < 4; i++)
|
|
mmc->capacity_gp[i] = 0;
|
|
|
|
if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN)
|
|
mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
|
|
mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
|
|
#endif
|
|
|
|
if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
|
|
cmd.cmdidx = MMC_CMD_SET_DSR;
|
|
cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
|
|
cmd.resp_type = MMC_RSP_NONE;
|
|
if (mmc_send_cmd(mmc, &cmd, NULL))
|
|
pr_warn("MMC: SET_DSR failed\n");
|
|
}
|
|
|
|
/* Select the card, and put it into Transfer Mode */
|
|
if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
|
|
cmd.cmdidx = MMC_CMD_SELECT_CARD;
|
|
cmd.resp_type = MMC_RSP_R1;
|
|
cmd.cmdarg = mmc->rca << 16;
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* For SD, its erase group is always one sector
|
|
*/
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
mmc->erase_grp_size = 1;
|
|
#endif
|
|
mmc->part_config = MMCPART_NOAVAILABLE;
|
|
|
|
err = mmc_startup_v4(mmc);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mmc_set_capacity(mmc, mmc_get_blk_desc(mmc)->hwpart);
|
|
if (err)
|
|
return err;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_TINY)
|
|
mmc_set_clock(mmc, mmc->legacy_speed, false);
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_bus_width(mmc, 1);
|
|
#else
|
|
if (IS_SD(mmc)) {
|
|
err = sd_get_capabilities(mmc);
|
|
if (err)
|
|
return err;
|
|
err = sd_select_mode_and_width(mmc, mmc->card_caps);
|
|
} else {
|
|
err = mmc_get_capabilities(mmc);
|
|
if (err)
|
|
return err;
|
|
err = mmc_select_mode_and_width(mmc, mmc->card_caps);
|
|
}
|
|
#endif
|
|
if (err)
|
|
return err;
|
|
|
|
mmc->best_mode = mmc->selected_mode;
|
|
|
|
/* Fix the block length for DDR mode */
|
|
if (mmc->ddr_mode) {
|
|
mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
|
|
#endif
|
|
}
|
|
|
|
/* fill in device description */
|
|
bdesc = mmc_get_blk_desc(mmc);
|
|
bdesc->lun = 0;
|
|
bdesc->hwpart = 0;
|
|
bdesc->type = 0;
|
|
bdesc->blksz = mmc->read_bl_len;
|
|
bdesc->log2blksz = LOG2(bdesc->blksz);
|
|
bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
|
|
#if !defined(CONFIG_SPL_BUILD) || \
|
|
(defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \
|
|
!CONFIG_IS_ENABLED(USE_TINY_PRINTF))
|
|
sprintf(bdesc->vendor, "Man %06x Snr %04x%04x",
|
|
mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
|
|
(mmc->cid[3] >> 16) & 0xffff);
|
|
sprintf(bdesc->product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
|
|
(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
|
|
(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
|
|
(mmc->cid[2] >> 24) & 0xff);
|
|
sprintf(bdesc->revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
|
|
(mmc->cid[2] >> 16) & 0xf);
|
|
#else
|
|
bdesc->vendor[0] = 0;
|
|
bdesc->product[0] = 0;
|
|
bdesc->revision[0] = 0;
|
|
#endif
|
|
|
|
#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT))
|
|
part_init(bdesc);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_if_cond(struct mmc *mmc)
|
|
{
|
|
struct mmc_cmd cmd;
|
|
int err;
|
|
|
|
cmd.cmdidx = SD_CMD_SEND_IF_COND;
|
|
/* We set the bit if the host supports voltages between 2.7 and 3.6 V */
|
|
cmd.cmdarg = ((mmc->cfg->voltages & 0xff8000) != 0) << 8 | 0xaa;
|
|
cmd.resp_type = MMC_RSP_R7;
|
|
|
|
err = mmc_send_cmd(mmc, &cmd, NULL);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
if ((cmd.response[0] & 0xff) != 0xaa)
|
|
return -EOPNOTSUPP;
|
|
else
|
|
mmc->version = SD_VERSION_2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
/* board-specific MMC power initializations. */
|
|
__weak void board_mmc_power_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int mmc_power_init(struct mmc *mmc)
|
|
{
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
int ret;
|
|
|
|
ret = device_get_supply_regulator(mmc->dev, "vmmc-supply",
|
|
&mmc->vmmc_supply);
|
|
if (ret)
|
|
pr_debug("%s: No vmmc supply\n", mmc->dev->name);
|
|
|
|
ret = device_get_supply_regulator(mmc->dev, "vqmmc-supply",
|
|
&mmc->vqmmc_supply);
|
|
if (ret)
|
|
pr_debug("%s: No vqmmc supply\n", mmc->dev->name);
|
|
#endif
|
|
#else /* !CONFIG_DM_MMC */
|
|
/*
|
|
* Driver model should use a regulator, as above, rather than calling
|
|
* out to board code.
|
|
*/
|
|
board_mmc_power_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* put the host in the initial state:
|
|
* - turn on Vdd (card power supply)
|
|
* - configure the bus width and clock to minimal values
|
|
*/
|
|
static void mmc_set_initial_state(struct mmc *mmc)
|
|
{
|
|
int err;
|
|
|
|
/* First try to set 3.3V. If it fails set to 1.8V */
|
|
err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_330);
|
|
if (err != 0)
|
|
err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_180);
|
|
if (err != 0)
|
|
pr_warn("mmc: failed to set signal voltage\n");
|
|
|
|
mmc_select_mode(mmc, MMC_LEGACY);
|
|
mmc_set_bus_width(mmc, 1);
|
|
mmc_set_clock(mmc, 0, MMC_CLK_ENABLE);
|
|
}
|
|
|
|
static int mmc_power_on(struct mmc *mmc)
|
|
{
|
|
#if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (mmc->vmmc_supply) {
|
|
int ret = regulator_set_enable(mmc->vmmc_supply, true);
|
|
|
|
if (ret && ret != -EACCES) {
|
|
printf("Error enabling VMMC supply : %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_power_off(struct mmc *mmc)
|
|
{
|
|
mmc_set_clock(mmc, 0, MMC_CLK_DISABLE);
|
|
#if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (mmc->vmmc_supply) {
|
|
int ret = regulator_set_enable(mmc->vmmc_supply, false);
|
|
|
|
if (ret && ret != -EACCES) {
|
|
pr_debug("Error disabling VMMC supply : %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_power_cycle(struct mmc *mmc)
|
|
{
|
|
int ret;
|
|
|
|
ret = mmc_power_off(mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mmc_host_power_cycle(mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* SD spec recommends at least 1ms of delay. Let's wait for 2ms
|
|
* to be on the safer side.
|
|
*/
|
|
udelay(2000);
|
|
return mmc_power_on(mmc);
|
|
}
|
|
|
|
int mmc_get_op_cond(struct mmc *mmc, bool quiet)
|
|
{
|
|
bool uhs_en = supports_uhs(mmc->cfg->host_caps);
|
|
int err;
|
|
|
|
if (mmc->has_init)
|
|
return 0;
|
|
|
|
err = mmc_power_init(mmc);
|
|
if (err)
|
|
return err;
|
|
|
|
#ifdef CONFIG_MMC_QUIRKS
|
|
mmc->quirks = MMC_QUIRK_RETRY_SET_BLOCKLEN |
|
|
MMC_QUIRK_RETRY_SEND_CID |
|
|
MMC_QUIRK_RETRY_APP_CMD;
|
|
#endif
|
|
|
|
err = mmc_power_cycle(mmc);
|
|
if (err) {
|
|
/*
|
|
* if power cycling is not supported, we should not try
|
|
* to use the UHS modes, because we wouldn't be able to
|
|
* recover from an error during the UHS initialization.
|
|
*/
|
|
pr_debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");
|
|
uhs_en = false;
|
|
mmc->host_caps &= ~UHS_CAPS;
|
|
err = mmc_power_on(mmc);
|
|
}
|
|
if (err)
|
|
return err;
|
|
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
/*
|
|
* Re-initialization is needed to clear old configuration for
|
|
* mmc rescan.
|
|
*/
|
|
err = mmc_reinit(mmc);
|
|
#else
|
|
/* made sure it's not NULL earlier */
|
|
err = mmc->cfg->ops->init(mmc);
|
|
#endif
|
|
if (err)
|
|
return err;
|
|
mmc->ddr_mode = 0;
|
|
|
|
retry:
|
|
mmc_set_initial_state(mmc);
|
|
|
|
/* Reset the Card */
|
|
err = mmc_go_idle(mmc);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
/* The internal partition reset to user partition(0) at every CMD0 */
|
|
mmc_get_blk_desc(mmc)->hwpart = 0;
|
|
|
|
/* Test for SD version 2 */
|
|
err = mmc_send_if_cond(mmc);
|
|
|
|
/* Now try to get the SD card's operating condition */
|
|
err = sd_send_op_cond(mmc, uhs_en);
|
|
if (err && uhs_en) {
|
|
uhs_en = false;
|
|
mmc_power_cycle(mmc);
|
|
goto retry;
|
|
}
|
|
|
|
/* If the command timed out, we check for an MMC card */
|
|
if (err == -ETIMEDOUT) {
|
|
err = mmc_send_op_cond(mmc);
|
|
|
|
if (err) {
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
if (!quiet)
|
|
pr_err("Card did not respond to voltage select! : %d\n", err);
|
|
#endif
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
int mmc_start_init(struct mmc *mmc)
|
|
{
|
|
bool no_card;
|
|
int err = 0;
|
|
|
|
/*
|
|
* all hosts are capable of 1 bit bus-width and able to use the legacy
|
|
* timings.
|
|
*/
|
|
mmc->host_caps = mmc->cfg->host_caps | MMC_CAP(MMC_LEGACY) |
|
|
MMC_MODE_1BIT;
|
|
|
|
if (IS_ENABLED(CONFIG_MMC_SPEED_MODE_SET)) {
|
|
if (mmc->user_speed_mode != MMC_MODES_END) {
|
|
int i;
|
|
/* set host caps */
|
|
if (mmc->host_caps & MMC_CAP(mmc->user_speed_mode)) {
|
|
/* Remove all existing speed capabilities */
|
|
for (i = MMC_LEGACY; i < MMC_MODES_END; i++)
|
|
mmc->host_caps &= ~MMC_CAP(i);
|
|
mmc->host_caps |= (MMC_CAP(mmc->user_speed_mode)
|
|
| MMC_CAP(MMC_LEGACY) |
|
|
MMC_MODE_1BIT);
|
|
} else {
|
|
pr_err("bus_mode requested is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
mmc_deferred_probe(mmc);
|
|
#endif
|
|
#if !defined(CONFIG_MMC_BROKEN_CD)
|
|
no_card = mmc_getcd(mmc) == 0;
|
|
#else
|
|
no_card = 0;
|
|
#endif
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
/* we pretend there's no card when init is NULL */
|
|
no_card = no_card || (mmc->cfg->ops->init == NULL);
|
|
#endif
|
|
if (no_card) {
|
|
mmc->has_init = 0;
|
|
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
|
|
pr_err("MMC: no card present\n");
|
|
#endif
|
|
return -ENOMEDIUM;
|
|
}
|
|
|
|
err = mmc_get_op_cond(mmc, false);
|
|
|
|
if (!err)
|
|
mmc->init_in_progress = 1;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mmc_complete_init(struct mmc *mmc)
|
|
{
|
|
int err = 0;
|
|
|
|
mmc->init_in_progress = 0;
|
|
if (mmc->op_cond_pending)
|
|
err = mmc_complete_op_cond(mmc);
|
|
|
|
if (!err)
|
|
err = mmc_startup(mmc);
|
|
if (err)
|
|
mmc->has_init = 0;
|
|
else
|
|
mmc->has_init = 1;
|
|
return err;
|
|
}
|
|
|
|
int mmc_init(struct mmc *mmc)
|
|
{
|
|
int err = 0;
|
|
__maybe_unused ulong start;
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(mmc->dev);
|
|
|
|
upriv->mmc = mmc;
|
|
#endif
|
|
if (mmc->has_init)
|
|
return 0;
|
|
|
|
start = get_timer(0);
|
|
|
|
if (!mmc->init_in_progress)
|
|
err = mmc_start_init(mmc);
|
|
|
|
if (!err)
|
|
err = mmc_complete_init(mmc);
|
|
if (err)
|
|
pr_info("%s: %d, time %lu\n", __func__, err, get_timer(start));
|
|
|
|
return err;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
int mmc_deinit(struct mmc *mmc)
|
|
{
|
|
u32 caps_filtered;
|
|
|
|
if (!mmc->has_init)
|
|
return 0;
|
|
|
|
if (IS_SD(mmc)) {
|
|
caps_filtered = mmc->card_caps &
|
|
~(MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) |
|
|
MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_DDR50) |
|
|
MMC_CAP(UHS_SDR104));
|
|
|
|
return sd_select_mode_and_width(mmc, caps_filtered);
|
|
} else {
|
|
caps_filtered = mmc->card_caps &
|
|
~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400) | MMC_CAP(MMC_HS_400_ES));
|
|
|
|
return mmc_select_mode_and_width(mmc, caps_filtered);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int mmc_set_dsr(struct mmc *mmc, u16 val)
|
|
{
|
|
mmc->dsr = val;
|
|
return 0;
|
|
}
|
|
|
|
/* CPU-specific MMC initializations */
|
|
__weak int cpu_mmc_init(struct bd_info *bis)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/* board-specific MMC initializations. */
|
|
__weak int board_mmc_init(struct bd_info *bis)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
void mmc_set_preinit(struct mmc *mmc, int preinit)
|
|
{
|
|
mmc->preinit = preinit;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
static int mmc_probe(struct bd_info *bis)
|
|
{
|
|
int ret, i;
|
|
struct uclass *uc;
|
|
struct udevice *dev;
|
|
|
|
ret = uclass_get(UCLASS_MMC, &uc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Try to add them in sequence order. Really with driver model we
|
|
* should allow holes, but the current MMC list does not allow that.
|
|
* So if we request 0, 1, 3 we will get 0, 1, 2.
|
|
*/
|
|
for (i = 0; ; i++) {
|
|
ret = uclass_get_device_by_seq(UCLASS_MMC, i, &dev);
|
|
if (ret == -ENODEV)
|
|
break;
|
|
}
|
|
uclass_foreach_dev(dev, uc) {
|
|
ret = device_probe(dev);
|
|
if (ret)
|
|
pr_err("%s - probe failed: %d\n", dev->name, ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int mmc_probe(struct bd_info *bis)
|
|
{
|
|
if (board_mmc_init(bis) < 0)
|
|
cpu_mmc_init(bis);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int mmc_initialize(struct bd_info *bis)
|
|
{
|
|
static int initialized = 0;
|
|
int ret;
|
|
if (initialized) /* Avoid initializing mmc multiple times */
|
|
return 0;
|
|
initialized = 1;
|
|
|
|
#if !CONFIG_IS_ENABLED(BLK)
|
|
#if !CONFIG_IS_ENABLED(MMC_TINY)
|
|
mmc_list_init();
|
|
#endif
|
|
#endif
|
|
ret = mmc_probe(bis);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
print_mmc_devices(',');
|
|
#endif
|
|
|
|
mmc_do_preinit();
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
int mmc_init_device(int num)
|
|
{
|
|
struct udevice *dev;
|
|
struct mmc *m;
|
|
int ret;
|
|
|
|
if (uclass_get_device_by_seq(UCLASS_MMC, num, &dev)) {
|
|
ret = uclass_get_device(UCLASS_MMC, num, &dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
m = mmc_get_mmc_dev(dev);
|
|
if (!m)
|
|
return 0;
|
|
|
|
/* Initialising user set speed mode */
|
|
m->user_speed_mode = MMC_MODES_END;
|
|
|
|
if (m->preinit)
|
|
mmc_start_init(m);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BKOPS_ENABLE
|
|
int mmc_set_bkops_enable(struct mmc *mmc, bool autobkops, bool enable)
|
|
{
|
|
int err;
|
|
u32 bit = autobkops ? BIT(1) : BIT(0);
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
|
|
err = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (err) {
|
|
puts("Could not get ext_csd register values\n");
|
|
return err;
|
|
}
|
|
|
|
if (!(ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1)) {
|
|
puts("Background operations not supported on device\n");
|
|
return -EMEDIUMTYPE;
|
|
}
|
|
|
|
if (enable && (ext_csd[EXT_CSD_BKOPS_EN] & bit)) {
|
|
puts("Background operations already enabled\n");
|
|
return 0;
|
|
}
|
|
|
|
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN,
|
|
enable ? bit : 0);
|
|
if (err) {
|
|
printf("Failed to %sable manual background operations\n",
|
|
enable ? "en" : "dis");
|
|
return err;
|
|
}
|
|
|
|
printf("%sabled %s background operations\n",
|
|
enable ? "En" : "Dis", autobkops ? "auto" : "manual");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
__weak int mmc_get_env_dev(void)
|
|
{
|
|
#ifdef CONFIG_SYS_MMC_ENV_DEV
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|