mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
8a8d24bdf1
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
275 lines
6.9 KiB
C
275 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse
|
|
* One-Time-Programmable (OTP) memory used within the SiFive FU540.
|
|
* It is documented in the FU540 manual here:
|
|
* https://www.sifive.com/documentation/chips/freedom-u540-c000-manual/
|
|
*
|
|
* Copyright (C) 2018 Philipp Hug <philipp@hug.cx>
|
|
* Copyright (C) 2018 Joey Hewitt <joey@joeyhewitt.com>
|
|
*
|
|
* Copyright (C) 2020 SiFive, Inc
|
|
*/
|
|
|
|
/*
|
|
* The FU540 stores 4096x32 bit (16KiB) values.
|
|
* Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB)
|
|
* Right now first 1KiB is used to store only serial number.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm/device.h>
|
|
#include <dm/read.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <misc.h>
|
|
|
|
#define BYTES_PER_FUSE 4
|
|
|
|
#define PA_RESET_VAL 0x00
|
|
#define PAS_RESET_VAL 0x00
|
|
#define PAIO_RESET_VAL 0x00
|
|
#define PDIN_RESET_VAL 0x00
|
|
#define PTM_RESET_VAL 0x00
|
|
|
|
#define PCLK_ENABLE_VAL BIT(0)
|
|
#define PCLK_DISABLE_VAL 0x00
|
|
|
|
#define PWE_WRITE_ENABLE BIT(0)
|
|
#define PWE_WRITE_DISABLE 0x00
|
|
|
|
#define PTM_FUSE_PROGRAM_VAL BIT(1)
|
|
|
|
#define PCE_ENABLE_INPUT BIT(0)
|
|
#define PCE_DISABLE_INPUT 0x00
|
|
|
|
#define PPROG_ENABLE_INPUT BIT(0)
|
|
#define PPROG_DISABLE_INPUT 0x00
|
|
|
|
#define PTRIM_ENABLE_INPUT BIT(0)
|
|
#define PTRIM_DISABLE_INPUT 0x00
|
|
|
|
#define PDSTB_DEEP_STANDBY_ENABLE BIT(0)
|
|
#define PDSTB_DEEP_STANDBY_DISABLE 0x00
|
|
|
|
/* Tpw - Program Pulse width delay */
|
|
#define TPW_DELAY 20
|
|
|
|
/* Tpwi - Program Pulse interval delay */
|
|
#define TPWI_DELAY 5
|
|
|
|
/* Tasp - Program address setup delay */
|
|
#define TASP_DELAY 1
|
|
|
|
/* Tcd - read data access delay */
|
|
#define TCD_DELAY 40
|
|
|
|
/* Tkl - clok pulse low delay */
|
|
#define TKL_DELAY 10
|
|
|
|
/* Tms - PTM mode setup delay */
|
|
#define TMS_DELAY 1
|
|
|
|
struct sifive_otp_regs {
|
|
u32 pa; /* Address input */
|
|
u32 paio; /* Program address input */
|
|
u32 pas; /* Program redundancy cell selection input */
|
|
u32 pce; /* OTP Macro enable input */
|
|
u32 pclk; /* Clock input */
|
|
u32 pdin; /* Write data input */
|
|
u32 pdout; /* Read data output */
|
|
u32 pdstb; /* Deep standby mode enable input (active low) */
|
|
u32 pprog; /* Program mode enable input */
|
|
u32 ptc; /* Test column enable input */
|
|
u32 ptm; /* Test mode enable input */
|
|
u32 ptm_rep;/* Repair function test mode enable input */
|
|
u32 ptr; /* Test row enable input */
|
|
u32 ptrim; /* Repair function enable input */
|
|
u32 pwe; /* Write enable input (defines program cycle) */
|
|
};
|
|
|
|
struct sifive_otp_plat {
|
|
struct sifive_otp_regs __iomem *regs;
|
|
u32 total_fuses;
|
|
};
|
|
|
|
/*
|
|
* offset and size are assumed aligned to the size of the fuses (32-bit).
|
|
*/
|
|
static int sifive_otp_read(struct udevice *dev, int offset,
|
|
void *buf, int size)
|
|
{
|
|
struct sifive_otp_plat *plat = dev_get_plat(dev);
|
|
struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;
|
|
|
|
/* Check if offset and size are multiple of BYTES_PER_FUSE */
|
|
if ((size % BYTES_PER_FUSE) || (offset % BYTES_PER_FUSE)) {
|
|
printf("%s: size and offset must be multiple of 4.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int fuseidx = offset / BYTES_PER_FUSE;
|
|
int fusecount = size / BYTES_PER_FUSE;
|
|
|
|
/* check bounds */
|
|
if (offset < 0 || size < 0)
|
|
return -EINVAL;
|
|
if (fuseidx >= plat->total_fuses)
|
|
return -EINVAL;
|
|
if ((fuseidx + fusecount) > plat->total_fuses)
|
|
return -EINVAL;
|
|
|
|
u32 fusebuf[fusecount];
|
|
|
|
/* init OTP */
|
|
writel(PDSTB_DEEP_STANDBY_ENABLE, ®s->pdstb);
|
|
writel(PTRIM_ENABLE_INPUT, ®s->ptrim);
|
|
writel(PCE_ENABLE_INPUT, ®s->pce);
|
|
|
|
/* read all requested fuses */
|
|
for (unsigned int i = 0; i < fusecount; i++, fuseidx++) {
|
|
writel(fuseidx, ®s->pa);
|
|
|
|
/* cycle clock to read */
|
|
writel(PCLK_ENABLE_VAL, ®s->pclk);
|
|
ndelay(TCD_DELAY * 1000);
|
|
writel(PCLK_DISABLE_VAL, ®s->pclk);
|
|
ndelay(TKL_DELAY * 1000);
|
|
|
|
/* read the value */
|
|
fusebuf[i] = readl(®s->pdout);
|
|
}
|
|
|
|
/* shut down */
|
|
writel(PCE_DISABLE_INPUT, ®s->pce);
|
|
writel(PTRIM_DISABLE_INPUT, ®s->ptrim);
|
|
writel(PDSTB_DEEP_STANDBY_DISABLE, ®s->pdstb);
|
|
|
|
/* copy out */
|
|
memcpy(buf, fusebuf, size);
|
|
|
|
return size;
|
|
}
|
|
|
|
/*
|
|
* Caution:
|
|
* OTP can be written only once, so use carefully.
|
|
*
|
|
* offset and size are assumed aligned to the size of the fuses (32-bit).
|
|
*/
|
|
static int sifive_otp_write(struct udevice *dev, int offset,
|
|
const void *buf, int size)
|
|
{
|
|
struct sifive_otp_plat *plat = dev_get_plat(dev);
|
|
struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;
|
|
|
|
/* Check if offset and size are multiple of BYTES_PER_FUSE */
|
|
if ((size % BYTES_PER_FUSE) || (offset % BYTES_PER_FUSE)) {
|
|
printf("%s: size and offset must be multiple of 4.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int fuseidx = offset / BYTES_PER_FUSE;
|
|
int fusecount = size / BYTES_PER_FUSE;
|
|
u32 *write_buf = (u32 *)buf;
|
|
u32 write_data;
|
|
int i, pas, bit;
|
|
|
|
/* check bounds */
|
|
if (offset < 0 || size < 0)
|
|
return -EINVAL;
|
|
if (fuseidx >= plat->total_fuses)
|
|
return -EINVAL;
|
|
if ((fuseidx + fusecount) > plat->total_fuses)
|
|
return -EINVAL;
|
|
|
|
/* init OTP */
|
|
writel(PDSTB_DEEP_STANDBY_ENABLE, ®s->pdstb);
|
|
writel(PTRIM_ENABLE_INPUT, ®s->ptrim);
|
|
|
|
/* reset registers */
|
|
writel(PCLK_DISABLE_VAL, ®s->pclk);
|
|
writel(PA_RESET_VAL, ®s->pa);
|
|
writel(PAS_RESET_VAL, ®s->pas);
|
|
writel(PAIO_RESET_VAL, ®s->paio);
|
|
writel(PDIN_RESET_VAL, ®s->pdin);
|
|
writel(PWE_WRITE_DISABLE, ®s->pwe);
|
|
writel(PTM_FUSE_PROGRAM_VAL, ®s->ptm);
|
|
ndelay(TMS_DELAY * 1000);
|
|
|
|
writel(PCE_ENABLE_INPUT, ®s->pce);
|
|
writel(PPROG_ENABLE_INPUT, ®s->pprog);
|
|
|
|
/* write all requested fuses */
|
|
for (i = 0; i < fusecount; i++, fuseidx++) {
|
|
writel(fuseidx, ®s->pa);
|
|
write_data = *(write_buf++);
|
|
|
|
for (pas = 0; pas < 2; pas++) {
|
|
writel(pas, ®s->pas);
|
|
|
|
for (bit = 0; bit < 32; bit++) {
|
|
writel(bit, ®s->paio);
|
|
writel(((write_data >> bit) & 1),
|
|
®s->pdin);
|
|
ndelay(TASP_DELAY * 1000);
|
|
|
|
writel(PWE_WRITE_ENABLE, ®s->pwe);
|
|
udelay(TPW_DELAY);
|
|
writel(PWE_WRITE_DISABLE, ®s->pwe);
|
|
udelay(TPWI_DELAY);
|
|
}
|
|
}
|
|
|
|
writel(PAS_RESET_VAL, ®s->pas);
|
|
}
|
|
|
|
/* shut down */
|
|
writel(PWE_WRITE_DISABLE, ®s->pwe);
|
|
writel(PPROG_DISABLE_INPUT, ®s->pprog);
|
|
writel(PCE_DISABLE_INPUT, ®s->pce);
|
|
writel(PTM_RESET_VAL, ®s->ptm);
|
|
|
|
writel(PTRIM_DISABLE_INPUT, ®s->ptrim);
|
|
writel(PDSTB_DEEP_STANDBY_DISABLE, ®s->pdstb);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int sifive_otp_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct sifive_otp_plat *plat = dev_get_plat(dev);
|
|
int ret;
|
|
|
|
plat->regs = dev_read_addr_ptr(dev);
|
|
|
|
ret = dev_read_u32(dev, "fuse-count", &plat->total_fuses);
|
|
if (ret < 0) {
|
|
pr_err("\"fuse-count\" not found\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct misc_ops sifive_otp_ops = {
|
|
.read = sifive_otp_read,
|
|
.write = sifive_otp_write,
|
|
};
|
|
|
|
static const struct udevice_id sifive_otp_ids[] = {
|
|
{ .compatible = "sifive,fu540-c000-otp" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(sifive_otp) = {
|
|
.name = "sifive_otp",
|
|
.id = UCLASS_MISC,
|
|
.of_match = sifive_otp_ids,
|
|
.of_to_plat = sifive_otp_of_to_plat,
|
|
.plat_auto = sizeof(struct sifive_otp_plat),
|
|
.ops = &sifive_otp_ops,
|
|
};
|