u-boot/drivers/pinctrl/meson/pinctrl-meson.h
Jerome Brunet f91121c794 pinctrl: meson: add g12a support
Add pinctrl support for the Amlogic G12A SoC, which is
very similar to the Amlogic AXG support but with an additionnal
drive-strength register bank.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00

142 lines
3.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
*/
#ifndef __PINCTRL_MESON_H__
#define __PINCTRL_MESON_H__
#include <linux/types.h>
struct meson_pmx_group {
const char *name;
const unsigned int *pins;
unsigned int num_pins;
const void *data;
};
struct meson_pmx_func {
const char *name;
const char * const *groups;
unsigned int num_groups;
};
struct meson_pinctrl_data {
const char *name;
struct meson_pmx_group *groups;
struct meson_pmx_func *funcs;
struct meson_bank *banks;
unsigned int pin_base;
unsigned int num_pins;
unsigned int num_groups;
unsigned int num_funcs;
unsigned int num_banks;
const struct driver *gpio_driver;
void *pmx_data;
};
struct meson_pinctrl {
struct meson_pinctrl_data *data;
void __iomem *reg_mux;
void __iomem *reg_gpio;
void __iomem *reg_pull;
void __iomem *reg_pullen;
void __iomem *reg_ds;
};
/**
* struct meson_reg_desc - a register descriptor
*
* @reg: register offset in the regmap
* @bit: bit index in register
*
* The structure describes the information needed to control pull,
* pull-enable, direction, etc. for a single pin
*/
struct meson_reg_desc {
unsigned int reg;
unsigned int bit;
};
/**
* enum meson_reg_type - type of registers encoded in @meson_reg_desc
*/
enum meson_reg_type {
REG_PULLEN,
REG_PULL,
REG_DIR,
REG_OUT,
REG_IN,
NUM_REG,
};
/**
* struct meson bank
*
* @name: bank name
* @first: first pin of the bank
* @last: last pin of the bank
* @regs: array of register descriptors
*
* A bank represents a set of pins controlled by a contiguous set of
* bits in the domain registers. The structure specifies which bits in
* the regmap control the different functionalities. Each member of
* the @regs array refers to the first pin of the bank.
*/
struct meson_bank {
const char *name;
unsigned int first;
unsigned int last;
struct meson_reg_desc regs[NUM_REG];
};
#define PIN(x, b) (b + x)
#define FUNCTION(fn) \
{ \
.name = #fn, \
.groups = fn ## _groups, \
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
{ \
.name = n, \
.first = f, \
.last = l, \
.regs = { \
[REG_PULLEN] = { per, peb }, \
[REG_PULL] = { pr, pb }, \
[REG_DIR] = { dr, db }, \
[REG_OUT] = { or, ob }, \
[REG_IN] = { ir, ib }, \
}, \
}
#define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
extern const struct pinctrl_ops meson_pinctrl_ops;
int meson_pinctrl_get_groups_count(struct udevice *dev);
const char *meson_pinctrl_get_group_name(struct udevice *dev,
unsigned int selector);
int meson_pinmux_get_functions_count(struct udevice *dev);
const char *meson_pinmux_get_function_name(struct udevice *dev,
unsigned int selector);
int meson_pinctrl_probe(struct udevice *dev);
int meson_gpio_get(struct udevice *dev, unsigned int offset);
int meson_gpio_set(struct udevice *dev, unsigned int offset, int value);
int meson_gpio_get_direction(struct udevice *dev, unsigned int offset);
int meson_gpio_direction_input(struct udevice *dev, unsigned int offset);
int meson_gpio_direction_output(struct udevice *dev, unsigned int offset,
int value);
int meson_gpio_probe(struct udevice *dev);
int meson_pinconf_set(struct udevice *dev, unsigned int pin,
unsigned int param, unsigned int arg);
int meson_pinconf_group_set(struct udevice *dev,
unsigned int group_selector,
unsigned int param, unsigned int arg);
#endif /* __PINCTRL_MESON_H__ */