u-boot/drivers/mmc/s5p_sdhci.c
Przemyslaw Marczak 3f3c13a513 mmc: s5p: set SD detection pin as input
The SD Card slot detection pin should be configured as input.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27 19:20:51 -06:00

212 lines
5 KiB
C

/*
* (C) Copyright 2012 SAMSUNG Electronics
* Jaehoon Chung <jh80.chung@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <sdhci.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <asm/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/clk.h>
#include <errno.h>
#include <asm/arch/pinmux.h>
static char *S5P_NAME = "SAMSUNG SDHCI";
static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
{
unsigned long val, ctrl;
/*
* SELCLKPADDS[17:16]
* 00 = 2mA
* 01 = 4mA
* 10 = 7mA
* 11 = 9mA
*/
sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4);
val = sdhci_readl(host, SDHCI_CONTROL2);
val &= SDHCI_CTRL2_SELBASECLK_SHIFT;
val |= SDHCI_CTRL2_ENSTAASYNCCLR |
SDHCI_CTRL2_ENCMDCNFMSK |
SDHCI_CTRL2_ENFBCLKRX |
SDHCI_CTRL2_ENCLKOUTHOLD;
sdhci_writel(host, val, SDHCI_CONTROL2);
/*
* FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7]
* FCSel[1:0] : Rx Feedback Clock Delay Control
* Inverter delay means10ns delay if SDCLK 50MHz setting
* 01 = Delay1 (basic delay)
* 11 = Delay2 (basic delay + 2ns)
* 00 = Delay3 (inverter delay)
* 10 = Delay4 (inverter delay + 2ns)
*/
val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1;
sdhci_writel(host, val, SDHCI_CONTROL3);
/*
* SELBASECLK[5:4]
* 00/01 = HCLK
* 10 = EPLL
* 11 = XTI or XEXTCLK
*/
ctrl = sdhci_readl(host, SDHCI_CONTROL2);
ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3);
ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2);
sdhci_writel(host, ctrl, SDHCI_CONTROL2);
}
static int s5p_sdhci_core_init(struct sdhci_host *host)
{
host->name = S5P_NAME;
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
host->set_control_reg = &s5p_sdhci_set_control_reg;
host->set_clock = set_mmc_clk;
host->host_caps = MMC_MODE_HC;
if (host->bus_width == 8)
host->host_caps |= MMC_MODE_8BIT;
return add_sdhci(host, 52000000, 400000);
}
int s5p_sdhci_init(u32 regbase, int index, int bus_width)
{
struct sdhci_host *host = malloc(sizeof(struct sdhci_host));
if (!host) {
printf("sdhci__host malloc fail!\n");
return 1;
}
host->ioaddr = (void *)regbase;
host->index = index;
host->bus_width = bus_width;
return s5p_sdhci_core_init(host);
}
#ifdef CONFIG_OF_CONTROL
struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
static int do_sdhci_init(struct sdhci_host *host)
{
char str[20];
int dev_id, flag;
int err = 0;
flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
dev_id = host->index + PERIPH_ID_SDMMC0;
if (fdt_gpio_isvalid(&host->pwr_gpio)) {
sprintf(str, "sdhci%d_power", host->index & 0xf);
gpio_request(host->pwr_gpio.gpio, str);
gpio_direction_output(host->pwr_gpio.gpio, 1);
err = exynos_pinmux_config(dev_id, flag);
if (err) {
debug("MMC not configured\n");
return err;
}
}
if (fdt_gpio_isvalid(&host->cd_gpio)) {
sprintf(str, "sdhci%d_cd", host->index & 0xf);
gpio_request(host->cd_gpio.gpio, str);
gpio_direction_input(host->cd_gpio.gpio);
if (gpio_get_value(host->cd_gpio.gpio))
return -ENODEV;
err = exynos_pinmux_config(dev_id, flag);
if (err) {
printf("external SD not configured\n");
return err;
}
}
return s5p_sdhci_core_init(host);
}
static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
{
int bus_width, dev_id;
unsigned int base;
/* Get device id */
dev_id = pinmux_decode_periph_id(blob, node);
if (dev_id < PERIPH_ID_SDMMC0 && dev_id > PERIPH_ID_SDMMC3) {
debug("MMC: Can't get device id\n");
return -1;
}
host->index = dev_id - PERIPH_ID_SDMMC0;
/* Get bus width */
bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (bus_width <= 0) {
debug("MMC: Can't get bus-width\n");
return -1;
}
host->bus_width = bus_width;
/* Get the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("MMC: Can't get base address\n");
return -1;
}
host->ioaddr = (void *)base;
fdtdec_decode_gpio(blob, node, "pwr-gpios", &host->pwr_gpio);
fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio);
return 0;
}
static int process_nodes(const void *blob, int node_list[], int count)
{
struct sdhci_host *host;
int i, node;
debug("%s: count = %d\n", __func__, count);
/* build sdhci_host[] for each controller */
for (i = 0; i < count; i++) {
node = node_list[i];
if (node <= 0)
continue;
host = &sdhci_host[i];
if (sdhci_get_config(blob, node, host)) {
printf("%s: failed to decode dev %d\n", __func__, i);
return -1;
}
do_sdhci_init(host);
}
return 0;
}
int exynos_mmc_init(const void *blob)
{
int count;
int node_list[SDHCI_MAX_HOSTS];
count = fdtdec_find_aliases_for_id(blob, "mmc",
COMPAT_SAMSUNG_EXYNOS_MMC, node_list,
SDHCI_MAX_HOSTS);
process_nodes(blob, node_list, count);
return 1;
}
#endif