mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
2147a16983
Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
835 lines
19 KiB
C
835 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2017 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <env.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <hwconfig.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <phy.h>
|
|
#include <fm_eth.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <fsl-mc/fsl_mc.h>
|
|
#include <fsl-mc/ldpaa_wriop.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "../common/qixis.h"
|
|
|
|
#include "ls1088a_qixis.h"
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
|
|
#define SFP_TX 0
|
|
|
|
/* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
|
|
* Bank 1 -> Lanes A, B, C, D,
|
|
* Bank 2 -> Lanes A,B, C, D,
|
|
*/
|
|
|
|
/* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
|
|
* means that the mapping must be determined dynamically, or that the lane
|
|
* maps to something other than a board slot.
|
|
*/
|
|
|
|
static u8 lane_to_slot_fsm1[] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
|
|
* housed.
|
|
*/
|
|
|
|
static int xqsgii_riser_phy_addr[] = {
|
|
XQSGMII_CARD_PHY1_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY1_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT2_ADDR,
|
|
};
|
|
|
|
static int sgmii_riser_phy_addr[] = {
|
|
SGMII_CARD_PORT1_PHY_ADDR,
|
|
SGMII_CARD_PORT2_PHY_ADDR,
|
|
SGMII_CARD_PORT3_PHY_ADDR,
|
|
SGMII_CARD_PORT4_PHY_ADDR,
|
|
};
|
|
|
|
/* Slot2 does not have EMI connections */
|
|
#define EMI_NONE 0xFF
|
|
#define EMI1_RGMII1 0
|
|
#define EMI1_RGMII2 1
|
|
#define EMI1_SLOT1 2
|
|
|
|
static const char * const mdio_names[] = {
|
|
"LS1088A_QDS_MDIO0",
|
|
"LS1088A_QDS_MDIO1",
|
|
"LS1088A_QDS_MDIO2",
|
|
DEFAULT_WRIOP_MDIO2_NAME,
|
|
};
|
|
|
|
struct ls1088a_qds_mdio {
|
|
u8 muxval;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
struct reg_pair {
|
|
uint addr;
|
|
u8 *val;
|
|
};
|
|
|
|
static void sgmii_configure_repeater(int dpmac)
|
|
{
|
|
struct mii_dev *bus;
|
|
uint8_t a = 0xf;
|
|
int i, j, k, ret;
|
|
unsigned short value;
|
|
const char *dev = "LS1088A_QDS_MDIO2";
|
|
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
|
int i2c_phy_addr = 0;
|
|
int phy_addr = 0;
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
|
|
struct reg_pair reg_pair[10] = {
|
|
{6, ®_val[0]}, {4, ®_val[1]},
|
|
{8, ®_val[2]}, {0xf, NULL},
|
|
{0x11, NULL}, {0x16, NULL},
|
|
{0x18, NULL}, {0x23, ®_val[3]},
|
|
{0x2d, ®_val[4]}, {4, ®_val[5]},
|
|
};
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
struct udevice *udev;
|
|
#endif
|
|
|
|
/* Set I2c to Slot 1 */
|
|
#if !CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = i2c_write(0x77, 0, 0, &a, 1);
|
|
#else
|
|
ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
|
|
if (!ret)
|
|
ret = dm_i2c_write(udev, 0, &a, 1);
|
|
#endif
|
|
if (ret)
|
|
goto error;
|
|
|
|
switch (dpmac) {
|
|
case 1:
|
|
i2c_phy_addr = i2c_addr[1];
|
|
phy_addr = 4;
|
|
break;
|
|
case 2:
|
|
i2c_phy_addr = i2c_addr[0];
|
|
phy_addr = 0;
|
|
break;
|
|
case 3:
|
|
i2c_phy_addr = i2c_addr[3];
|
|
phy_addr = 0xc;
|
|
break;
|
|
case 7:
|
|
i2c_phy_addr = i2c_addr[2];
|
|
phy_addr = 8;
|
|
break;
|
|
}
|
|
|
|
/* Check the PHY status */
|
|
ret = miiphy_set_current_dev(dev);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
bus = mdio_get_current_dev();
|
|
debug("Reading from bus %s\n", bus->name);
|
|
|
|
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
|
|
if ((value & 0xfff) == 0x401) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
|
|
#endif
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
reg_pair[3].val = &ch_a_eq[i];
|
|
reg_pair[4].val = &ch_a_ctl2[j];
|
|
reg_pair[5].val = &ch_b_eq[i];
|
|
reg_pair[6].val = &ch_b_ctl2[j];
|
|
for (k = 0; k < 10; k++) {
|
|
#if !CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = i2c_write(i2c_phy_addr,
|
|
reg_pair[k].addr,
|
|
1, reg_pair[k].val, 1);
|
|
#else
|
|
ret = i2c_get_chip_for_busnum(0,
|
|
i2c_phy_addr,
|
|
1, &udev);
|
|
if (!ret)
|
|
ret = dm_i2c_write(udev,
|
|
reg_pair[k].addr,
|
|
reg_pair[k].val, 1);
|
|
#endif
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
if ((value & 0xfff) == 0x401) {
|
|
printf("DPMAC %d :PHY is configured ",
|
|
dpmac);
|
|
printf("after setting repeater 0x%x\n",
|
|
value);
|
|
i = 5;
|
|
j = 5;
|
|
} else {
|
|
printf("DPMAC %d :PHY is failed to ",
|
|
dpmac);
|
|
printf("configure the repeater 0x%x\n", value);
|
|
}
|
|
}
|
|
}
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
error:
|
|
if (ret)
|
|
printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
static void qsgmii_configure_repeater(int dpmac)
|
|
{
|
|
uint8_t a = 0xf;
|
|
int i, j, k;
|
|
int i2c_phy_addr = 0;
|
|
int phy_addr = 0;
|
|
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
|
|
struct reg_pair reg_pair[10] = {
|
|
{6, ®_val[0]}, {4, ®_val[1]},
|
|
{8, ®_val[2]}, {0xf, NULL},
|
|
{0x11, NULL}, {0x16, NULL},
|
|
{0x18, NULL}, {0x23, ®_val[3]},
|
|
{0x2d, ®_val[4]}, {4, ®_val[5]},
|
|
};
|
|
|
|
const char *dev = mdio_names[EMI1_SLOT1];
|
|
int ret = 0;
|
|
unsigned short value;
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
struct udevice *udev;
|
|
#endif
|
|
|
|
/* Set I2c to Slot 1 */
|
|
#if !CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = i2c_write(0x77, 0, 0, &a, 1);
|
|
#else
|
|
ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
|
|
if (!ret)
|
|
ret = dm_i2c_write(udev, 0, &a, 1);
|
|
#endif
|
|
if (ret)
|
|
goto error;
|
|
|
|
switch (dpmac) {
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
case 10:
|
|
i2c_phy_addr = i2c_addr[2];
|
|
phy_addr = 8;
|
|
break;
|
|
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
i2c_phy_addr = i2c_addr[3];
|
|
phy_addr = 0xc;
|
|
break;
|
|
}
|
|
|
|
/* Check the PHY status */
|
|
ret = miiphy_set_current_dev(dev);
|
|
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
|
|
#endif
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
reg_pair[3].val = &ch_a_eq[i];
|
|
reg_pair[4].val = &ch_a_ctl2[j];
|
|
reg_pair[5].val = &ch_b_eq[i];
|
|
reg_pair[6].val = &ch_b_ctl2[j];
|
|
|
|
for (k = 0; k < 10; k++) {
|
|
#if !CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = i2c_write(i2c_phy_addr,
|
|
reg_pair[k].addr,
|
|
1, reg_pair[k].val, 1);
|
|
#else
|
|
ret = i2c_get_chip_for_busnum(0,
|
|
i2c_addr[dpmac],
|
|
1, &udev);
|
|
if (!ret)
|
|
ret = dm_i2c_write(udev,
|
|
reg_pair[k].addr,
|
|
reg_pair[k].val, 1);
|
|
#endif
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(1);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
miiphy_write(dev, phy_addr, 0x1f, 0);
|
|
printf("DPMAC %d :PHY is ..... Configured\n",
|
|
dpmac);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
error:
|
|
printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
|
|
{
|
|
return mdio_names[muxval];
|
|
}
|
|
|
|
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
|
{
|
|
struct mii_dev *bus;
|
|
const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
|
|
|
|
if (!name) {
|
|
printf("No bus for muxval %x\n", muxval);
|
|
return NULL;
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name(name);
|
|
|
|
if (!bus) {
|
|
printf("No bus by name %s\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
static void ls1088a_qds_enable_SFP_TX(u8 muxval)
|
|
{
|
|
u8 brdcfg9;
|
|
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
|
|
brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
|
}
|
|
|
|
static void ls1088a_qds_mux_mdio(u8 muxval)
|
|
{
|
|
u8 brdcfg4;
|
|
|
|
if (muxval <= 5) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
|
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
|
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
|
}
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
|
|
int devad, int regnum)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
ls1088a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
ls1088a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct ls1088a_qds_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
|
|
{
|
|
struct ls1088a_qds_mdio *pmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate ls1088a_qds MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
pmdio = malloc(sizeof(*pmdio));
|
|
if (!pmdio) {
|
|
printf("Failed to allocate ls1088a_qds private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = ls1088a_qds_mdio_read;
|
|
bus->write = ls1088a_qds_mdio_write;
|
|
bus->reset = ls1088a_qds_mdio_reset;
|
|
sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
|
|
|
|
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!pmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(pmdio);
|
|
return -1;
|
|
}
|
|
|
|
pmdio->muxval = muxval;
|
|
bus->priv = pmdio;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
/*
|
|
* Initialize the dpmac_info array.
|
|
*
|
|
*/
|
|
static void initialize_dpmac_to_slot(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x12:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
|
break;
|
|
case 0x15:
|
|
case 0x1D:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI_NONE;
|
|
lane_to_slot_fsm1[3] = EMI_NONE;
|
|
break;
|
|
case 0x1E:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI_NONE;
|
|
break;
|
|
case 0x3A:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[1] = EMI_NONE;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
|
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
|
break;
|
|
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__, serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
|
|
{
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
int *riser_phy_addr;
|
|
char *env_hwconfig = env_get("hwconfig");
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig))
|
|
riser_phy_addr = &xqsgii_riser_phy_addr[0];
|
|
else
|
|
riser_phy_addr = &sgmii_riser_phy_addr[0];
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x12:
|
|
case 0x15:
|
|
case 0x1E:
|
|
case 0x3A:
|
|
switch (dpmac_id) {
|
|
case 1:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]);
|
|
break;
|
|
case 2:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]);
|
|
break;
|
|
case 3:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]);
|
|
break;
|
|
case 7:
|
|
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]);
|
|
break;
|
|
default:
|
|
printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__, serdes1_prtcl);
|
|
return;
|
|
}
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
|
|
{
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x1D:
|
|
case 0x1E:
|
|
switch (dpmac_id) {
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9);
|
|
break;
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
case 10:
|
|
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1);
|
|
break;
|
|
}
|
|
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls1088a_handle_phy_interface_xsgmii(int i)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x15:
|
|
case 0x1D:
|
|
case 0x1E:
|
|
wriop_set_phy_address(i, 0, i + 26);
|
|
ls1088a_qds_enable_SFP_TX(SFP_TX);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
u32 serdes1_prtcl, cfg;
|
|
struct mii_dev *bus;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
switch (dpmac_id) {
|
|
case 4:
|
|
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
|
|
bus = mii_dev_for_muxval(EMI1_RGMII1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
case 5:
|
|
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
|
|
bus = mii_dev_for_muxval(EMI1_RGMII2);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(struct bd_info *bis)
|
|
{
|
|
int error = 0, i;
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
struct memac_mdio_info *memac_mdio0_info;
|
|
char *env_hwconfig = env_get("hwconfig");
|
|
|
|
initialize_dpmac_to_slot();
|
|
|
|
memac_mdio0_info = (struct memac_mdio_info *)malloc(
|
|
sizeof(struct memac_mdio_info));
|
|
memac_mdio0_info->regs =
|
|
(struct memac_mdio_controller *)
|
|
CONFIG_SYS_FSL_WRIOP1_MDIO1;
|
|
memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
|
|
|
|
/* Register the real MDIO1 bus */
|
|
fm_memac_mdio_init(bis, memac_mdio0_info);
|
|
/* Register the muxing front-ends to the MDIO buses */
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
|
|
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
|
|
|
|
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
|
switch (wriop_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
ls1088a_handle_phy_interface_rgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
ls1088a_handle_phy_interface_qsgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
ls1088a_handle_phy_interface_sgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
ls1088a_handle_phy_interface_xsgmii(i);
|
|
break;
|
|
default:
|
|
break;
|
|
|
|
if (i == 16)
|
|
i = NUM_WRIOP_PORTS;
|
|
}
|
|
}
|
|
|
|
error = cpu_eth_init(bis);
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
|
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
|
switch (wriop_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
qsgmii_configure_repeater(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
sgmii_configure_repeater(i);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (i == 16)
|
|
i = NUM_WRIOP_PORTS;
|
|
}
|
|
}
|
|
#endif
|
|
error = pci_eth_init(bis);
|
|
return error;
|
|
}
|
|
#endif // !CONFIG_DM_ETH
|
|
|
|
#if defined(CONFIG_RESET_PHY_R)
|
|
void reset_phy(void)
|
|
{
|
|
mc_env_boot();
|
|
}
|
|
#endif /* CONFIG_RESET_PHY_R */
|
|
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
|
|
|
|
/* Structure to hold SERDES protocols supported in case of
|
|
* CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
|
|
*
|
|
* @serdes_block: the index of the SERDES block
|
|
* @serdes_protocol: the decimal value of the protocol supported
|
|
* @dts_needed: DTS notes describing the current configuration are needed
|
|
*
|
|
* When dts_needed is true, the board_fit_config_name_match() function
|
|
* will try to exactly match the current configuration of the block with a DTS
|
|
* name provided.
|
|
*/
|
|
static struct serdes_configuration {
|
|
u8 serdes_block;
|
|
u32 serdes_protocol;
|
|
bool dts_needed;
|
|
} supported_protocols[] = {
|
|
/* Serdes block #1 */
|
|
{1, 21, true},
|
|
{1, 29, true},
|
|
};
|
|
|
|
#define SUPPORTED_SERDES_PROTOCOLS ARRAY_SIZE(supported_protocols)
|
|
|
|
static bool protocol_supported(u8 serdes_block, u32 protocol)
|
|
{
|
|
struct serdes_configuration serdes_conf;
|
|
int i;
|
|
|
|
for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
|
|
serdes_conf = supported_protocols[i];
|
|
if (serdes_conf.serdes_block == serdes_block &&
|
|
serdes_conf.serdes_protocol == protocol)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void get_str_protocol(u8 serdes_block, u32 protocol, char *str)
|
|
{
|
|
struct serdes_configuration serdes_conf;
|
|
int i;
|
|
|
|
for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
|
|
serdes_conf = supported_protocols[i];
|
|
if (serdes_conf.serdes_block == serdes_block &&
|
|
serdes_conf.serdes_protocol == protocol) {
|
|
if (serdes_conf.dts_needed == true)
|
|
sprintf(str, "%u", protocol);
|
|
else
|
|
sprintf(str, "x");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
int board_fit_config_name_match(const char *name)
|
|
{
|
|
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
char expected_dts[100];
|
|
char srds_s1_str[2];
|
|
u32 srds_s1, cfg;
|
|
|
|
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
|
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
|
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
|
srds_s1 = serdes_get_number(FSL_SRDS_1, cfg);
|
|
|
|
/* Check for supported protocols. The default DTS will be used
|
|
* in this case
|
|
*/
|
|
if (!protocol_supported(1, srds_s1))
|
|
return -1;
|
|
|
|
get_str_protocol(1, srds_s1, srds_s1_str);
|
|
|
|
sprintf(expected_dts, "fsl-ls1088a-qds-%s-x", srds_s1_str);
|
|
|
|
if (!strcmp(name, expected_dts))
|
|
return 0;
|
|
|
|
return -1;
|
|
}
|
|
#endif
|