u-boot/cpu/mpc5xxx
Heiko Schocher 3887c3fbdb mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
U-Boot can detect if an IDE device is present or not.
If not, and this new config option is activated, U-Boot
removes the ATA node from the DTS before booting Linux,
so the Linux IDE driver does not probe the device and
crash. This is needed for buggy hardware (uc101) where
no pull down resistor is connected to the signal IDE5V_DD7.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-09-25 01:22:13 +02:00
..
config.mk PPC: Use r2 instead of r29 as global data pointer 2008-02-14 22:43:22 +01:00
cpu.c mucmc52, uc101: delete ata@3a00 node, if no CF card is detected 2009-09-25 01:22:13 +02:00
cpu_init.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
firmware_sc_task.impl.S * Add support for IceCube board (with MGT5100 and MPC5200 CPUs) 2003-07-16 21:53:01 +00:00
firmware_sc_task_bestcomm.impl.S rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
i2c.c Reset i2c slave devices during init on mpc5xxx cpus 2009-09-06 11:26:04 +02:00
ide.c board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
interrupts.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
io.S * Add support for IceCube board (with MGT5100 and MPC5200 CPUs) 2003-07-16 21:53:01 +00:00
loadtask.c * Add support for IceCube board (with MGT5100 and MPC5200 CPUs) 2003-07-16 21:53:01 +00:00
Makefile Move MPC5xxx_FEC driver to drivers/net 2008-08-29 13:58:07 -06:00
pci_mpc5200.c pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity 2009-02-07 23:50:04 +01:00
serial.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
speed.c Use strmhz() to format clock frequencies 2008-10-21 11:25:38 +02:00
start.S Update U-Boot's build timestamp on every compile 2008-12-06 23:36:43 +01:00
traps.c cpu/m*: Remove obsolete references to CONFIG_COMMANDS 2007-07-09 19:06:00 -05:00
u-boot-customlayout.lds Fix all linker script to handle all rodata sections 2009-03-20 22:39:12 +01:00
u-boot.lds Fix all linker script to handle all rodata sections 2009-03-20 22:39:12 +01:00
usb.c Add support for USB on PSC3 for the mpc5200 2009-08-25 12:57:55 +02:00
usb_ohci.c Add support for USB on PSC3 for the mpc5200 2009-08-25 12:57:55 +02:00
usb_ohci.h Replace __attribute references with __attribute__ 2009-04-28 01:01:39 +02:00