Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 13:56:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/host/ehci-mx5.c
Benoît Thébaudeau ba5dfc11ba imx: mx5: Remove legacy iomux support 
Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-05 17:55:05 +02:00

274 lines
7.6 KiB
C
Raw Blame History

/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <common.h>
#include <usb.h>
#include <errno.h>
#include <linux/compiler.h>
#include <usb/ehci-fsl.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include "ehci.h"
#define MX5_USBOTHER_REGS_OFFSET 0x800
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#define MXC_H2_OFFSET 0x400
#define MXC_H3_OFFSET 0x600
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USB_CTRL_1_OFFSET 0x10
#define MXC_USBH2CTRL_OFFSET 0x14
#define MXC_USBH3CTRL_OFFSET 0x18
/* USB_CTRL */
/* OTG wakeup intr enable */
#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27)
/* OTG power mask */
#define MXC_OTG_UCTRL_OPM_BIT (1 << 24)
/* OTG power pin polarity */
#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24)
/* Host1 ULPI interrupt enable */
#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12)
/* HOST1 wakeup intr enable */
#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11)
/* HOST1 power mask */
#define MXC_H1_UCTRL_H1PM_BIT (1 << 8)
/* HOST1 power pin polarity */
#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8)
/* USB_PHY_CTRL_FUNC */
/* OTG Polarity of Overcurrent */
#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9)
/* OTG Disable Overcurrent Event */
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
/* UH1 Polarity of Overcurrent */
#define MXC_H1_OC_POL_BIT (1 << 6)
/* UH1 Disable Overcurrent Event */
#define MXC_H1_OC_DIS_BIT (1 << 5)
/* OTG Power Pin Polarity */
#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3)
/* USBH2CTRL */
#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31)
#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30)
#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4)
/* USBH3CTRL */
#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31)
#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30)
#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8)
#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7)
#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4)
/* USB_CTRL_1 */
#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
void __iomem *usb_base = (void __iomem *)OTG_BASE_ADDR;
void __iomem *usbother_base;
int ret = 0;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
switch (port) {
case 0: /* OTG port */
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
else
v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
/* OC/USBPWR is used */
v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
else
/* OC/USBPWR is not used */
v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
#ifdef CONFIG_MX51
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
else
v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
#endif
__raw_writel(v, usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_OTG_UCTRL_OPM_BIT;
else
v |= MXC_OTG_UCTRL_OPM_BIT;
#endif
#ifdef CONFIG_MX53
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MXC_OTG_UCTRL_O_PWR_POL_BIT;
else
v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT;
#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
case 1: /* Host 1 ULPI */
#ifdef CONFIG_MX51
/* The clock for the USBH1 ULPI port will come externally
from the PHY. */
v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET);
__raw_writel(v | MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base +
MXC_USB_CTRL_1_OFFSET);
#endif
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
else
v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
#endif
#ifdef CONFIG_MX53
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MXC_H1_UCTRL_H1_PWR_POL_BIT;
else
v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT;
#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
v |= MXC_H1_OC_POL_BIT;
else
v &= ~MXC_H1_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
break;
case 2: /* Host 2 ULPI */
v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
else
v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
#endif
#ifdef CONFIG_MX53
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
v |= MXC_H2_UCTRL_H2_OC_POL_BIT;
else
v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */
else
v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MXC_H2_UCTRL_H2_PWR_POL_BIT;
else
v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT;
#endif
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
break;
#ifdef CONFIG_MX53
case 3: /* Host 3 ULPI */
v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET);
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
v |= MXC_H3_UCTRL_H3_OC_POL_BIT;
else
v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */
else
v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MXC_H3_UCTRL_H3_PWR_POL_BIT;
else
v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT;
__raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET);
break;
#endif
}
return ret;
}
int __weak board_ehci_hcd_init(int port)
{
return 0;
}
void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
{
}
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci;
#ifdef CONFIG_MX53
struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR;
u32 reg;
reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
/* derive USB PHY clock multiplexer from PLL3 */
reg |= 1 << 26;
__raw_writel(reg, &sc_regs->cscmr1);
#endif
set_usboh3_clk();
enable_usboh3_clk(1);
set_usb_phy_clk();
enable_usb_phy1_clk(1);
enable_usb_phy2_clk(1);
mdelay(1);
/* Do board specific initialization */
board_ehci_hcd_init(CONFIG_MXC_USB_PORT);
ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
(0x200 * CONFIG_MXC_USB_PORT));
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
mdelay(10);
/* Do board specific post-initialization */
board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT);
return 0;
}
int ehci_hcd_stop(int index)
{
return 0;
}
Reference in a new issue View git blame Copy permalink