mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
5d6050fdb8
This patch adds the new Barco platinum platform. It currently includes those two boards: platinum-titanium ----------------- This is the same board as the titanium that is already supported in mainline U-Boot. But its now moved to this new platform to support multiple "flavors" of imx6 boards in one directory. Its also moved to support SPL booting. And with this we use the run-time DDR configuration of this SPL support. The board is equipped with the Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR related registers tuples from the imximage.cfg file. As all this is done in the SPL at run-time. platinum-picon -------------- This board is new and based on the MX6DL with 1GiB DDR using the Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND chips (each 512MiB). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Pieter Ronsijn <pieter.ronsijn@barco.com>
209 lines
6.6 KiB
C
209 lines
6.6 KiB
C
/*
|
|
* Copyright (C) 2014, Barco (www.barco.com)
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
#include <asm/imx-common/mxc_i2c.h>
|
|
#include <miiphy.h>
|
|
#include <micrel.h>
|
|
|
|
#include "platinum.h"
|
|
|
|
iomux_v3_cfg_t const ecspi1_pads[] = {
|
|
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK),
|
|
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
|
|
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
|
|
MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
/* non mounted spi nor flash for booting */
|
|
MX6_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
};
|
|
|
|
iomux_v3_cfg_t const ecspi2_pads[] = {
|
|
MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK),
|
|
MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
|
|
MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
|
|
MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads1[] = {
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
/* pin 35 - 1 (PHY_AD2) on reset */
|
|
MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 32 - 1 - (MODE0) all */
|
|
MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 31 - 1 - (MODE1) all */
|
|
MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 28 - 1 - (MODE2) all */
|
|
MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 27 - 1 - (MODE3) all */
|
|
MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
|
|
MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* pin 42 PHY nRST */
|
|
MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads2[] = {
|
|
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart2_pads[] = {
|
|
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D28__UART2_DTE_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_EIM_D29__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart4_pads[] = {
|
|
MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info0 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL,
|
|
.gp = IMX_GPIO_NR(5, 27)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
|
|
.gp = IMX_GPIO_NR(5, 26)
|
|
}
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info2 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL,
|
|
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_16__GPIO7_IO11 | PC,
|
|
.gp = IMX_GPIO_NR(7, 11)
|
|
}
|
|
};
|
|
|
|
/*
|
|
* This enet related pin-muxing and GPIO handling is done
|
|
* in SPL U-Boot. For early initialization. And to give the
|
|
* PHY some time to come out of reset before the U-Boot
|
|
* ethernet driver tries to access its registers via MDIO.
|
|
*/
|
|
int platinum_setup_enet(void)
|
|
{
|
|
gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
|
|
gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
|
|
|
|
/* Need delay 10ms according to KSZ9021 spec */
|
|
mdelay(10);
|
|
gpio_set_value(IMX_GPIO_NR(3, 23), 1);
|
|
udelay(100);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_setup_i2c(void)
|
|
{
|
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_setup_spi(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
|
|
imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_setup_uart(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
|
|
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_phy_config(struct phy_device *phydev)
|
|
{
|
|
/* min rx data delay */
|
|
ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
|
|
0x0);
|
|
/* min tx data delay */
|
|
ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
|
|
0x0);
|
|
/* max rx/tx clock delay, min rx/tx control */
|
|
ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
|
|
0xf0f0);
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_gpio(void)
|
|
{
|
|
/* Default GPIO's */
|
|
/* Toggle CONFIG_n to reset fpga on every boot */
|
|
gpio_direction_output(IMX_GPIO_NR(5, 18), 0);
|
|
/* Need delay >=2uS */
|
|
udelay(3);
|
|
gpio_set_value(IMX_GPIO_NR(5, 18), 1);
|
|
|
|
/* Default pin 1,15 high - DLP_FLASH_WPZ */
|
|
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_usb(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int platinum_init_finished(void)
|
|
{
|
|
return 0;
|
|
}
|