mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
128 lines
2.9 KiB
C
128 lines
2.9 KiB
C
/*
|
|
* da8xx.c - TI's DA8xx platform specific usb wrapper functions.
|
|
*
|
|
* Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
|
|
*
|
|
* Based on drivers/usb/musb/davinci.c
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
|
|
#include "musb_core.h"
|
|
#include <asm/arch/da8xx-usb.h>
|
|
|
|
/* MUSB platform configuration */
|
|
struct musb_config musb_cfg = {
|
|
.regs = (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
|
|
.timeout = DA8XX_USB_OTG_TIMEOUT,
|
|
.musb_speed = 0,
|
|
};
|
|
|
|
/*
|
|
* This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
|
|
*/
|
|
static void enable_vbus(void)
|
|
{
|
|
u32 value;
|
|
|
|
/* configure GPIO bank4 pin 15 in output direction */
|
|
value = readl(&davinci_gpio_bank45->dir);
|
|
writel((value & (~DA8XX_USB_VBUS_GPIO)), &davinci_gpio_bank45->dir);
|
|
|
|
/* set GPIO bank4 pin 15 high to drive VBUS */
|
|
value = readl(&davinci_gpio_bank45->set_data);
|
|
writel((value | DA8XX_USB_VBUS_GPIO), &davinci_gpio_bank45->set_data);
|
|
}
|
|
|
|
/*
|
|
* Enable the usb0 phy. This initialization procedure is explained in
|
|
* the DA8xx USB user guide document.
|
|
*/
|
|
static u8 phy_on(void)
|
|
{
|
|
u32 timeout;
|
|
u32 cfgchip2;
|
|
|
|
cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
|
|
|
|
cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
|
|
CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
|
|
cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
|
|
CFGCHIP2_REFFREQ_24MHZ;
|
|
|
|
writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
|
|
|
|
/* wait until the usb phy pll locks */
|
|
timeout = musb_cfg.timeout;
|
|
while (timeout--)
|
|
if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
|
|
return 1;
|
|
|
|
/* USB phy was not turned on */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disable the usb phy
|
|
*/
|
|
static void phy_off(void)
|
|
{
|
|
u32 cfgchip2;
|
|
|
|
/*
|
|
* Power down the on-chip PHY.
|
|
*/
|
|
cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
|
|
cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
|
|
cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
|
|
writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
|
|
}
|
|
|
|
/*
|
|
* This function performs DA8xx platform specific initialization for usb0.
|
|
*/
|
|
int musb_platform_init(void)
|
|
{
|
|
u32 revision;
|
|
|
|
/* enable psc for usb2.0 */
|
|
lpsc_on(33);
|
|
|
|
/* enable usb vbus */
|
|
enable_vbus();
|
|
|
|
/* reset the controller */
|
|
writel(0x1, &da8xx_usb_regs->control);
|
|
udelay(5000);
|
|
|
|
/* start the on-chip usb phy and its pll */
|
|
if (phy_on() == 0)
|
|
return -1;
|
|
|
|
/* Returns zero if e.g. not clocked */
|
|
revision = readl(&da8xx_usb_regs->revision);
|
|
if (revision == 0)
|
|
return -1;
|
|
|
|
/* Disable all interrupts */
|
|
writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
|
|
DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function performs DA8xx platform specific deinitialization for usb0.
|
|
*/
|
|
void musb_platform_deinit(void)
|
|
{
|
|
/* Turn of the phy */
|
|
phy_off();
|
|
|
|
/* flush any interrupts */
|
|
writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
|
|
DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
|
|
writel(0, &da8xx_usb_regs->eoi);
|
|
}
|