u-boot/drivers/qe/uec_phy.c
Andy Fleming 865ff85640 fsl: Change fsl_phy_enet_if to phy_interface_t
The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:35 -05:00

916 lines
24 KiB
C

/*
* Copyright (C) 2005,2010-2011 Freescale Semiconductor, Inc.
*
* Author: Shlomi Gridish
*
* Description: UCC GETH Driver -- PHY handling
* Driver for UEC on QE
* Based on 8260_io/fcc_enet.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include "common.h"
#include "net.h"
#include "malloc.h"
#include "asm/errno.h"
#include "asm/immap_qe.h"
#include "asm/io.h"
#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
#include <phy.h>
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
#define ugphy_dbg(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_err(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_info(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_warn(format, arg...) \
ugphy_printk(format , ## arg)
#ifdef UEC_VERBOSE_DEBUG
#define ugphy_vdbg ugphy_dbg
#else
#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
#endif /* UEC_VERBOSE_DEBUG */
/*--------------------------------------------------------------------+
* Fixed PHY (PHY-less) support for Ethernet Ports.
*
* Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
*--------------------------------------------------------------------*/
/*
* Some boards do not have a PHY for each ethernet port. These ports are known
* as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
* CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
* When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned
* and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network
* speed and duplex should be for the port.
*
* Example board header configuration file:
* #define CONFIG_FIXED_PHY 0xFFFFFFFF
* #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address)
*
* #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
* #define CONFIG_SYS_UEC2_PHY_ADDR 0x02
* #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
* #define CONFIG_SYS_UEC4_PHY_ADDR 0x04
*
* #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \
* {name, speed, duplex},
*
* #define CONFIG_SYS_FIXED_PHY_PORTS \
* CONFIG_SYS_FIXED_PHY_PORT("UEC0",SPEED_100,DUPLEX_FULL) \
* CONFIG_SYS_FIXED_PHY_PORT("UEC2",SPEED_100,DUPLEX_HALF)
*/
#ifndef CONFIG_FIXED_PHY
#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */
#endif
#ifndef CONFIG_SYS_FIXED_PHY_PORTS
#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */
#endif
struct fixed_phy_port {
char name[NAMESIZE]; /* ethernet port name */
unsigned int speed; /* specified speed 10,100 or 1000 */
unsigned int duplex; /* specified duplex FULL or HALF */
};
static const struct fixed_phy_port fixed_phy_port[] = {
CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
};
/*--------------------------------------------------------------------+
* BitBang MII support for ethernet ports
*
* Based from MPC8560ADS implementation
*--------------------------------------------------------------------*/
/*
* Example board header file to define bitbang ethernet ports:
*
* #define CONFIG_SYS_BITBANG_PHY_PORT(name) name,
* #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("UEC0")
*/
#ifndef CONFIG_SYS_BITBANG_PHY_PORTS
#define CONFIG_SYS_BITBANG_PHY_PORTS /* default is an empty array */
#endif
#if defined(CONFIG_BITBANGMII)
static const char *bitbang_phy_port[] = {
CONFIG_SYS_BITBANG_PHY_PORTS /* defined in board configuration file */
};
#endif /* CONFIG_BITBANGMII */
static void config_genmii_advert (struct uec_mii_info *mii_info);
static void genmii_setup_forced (struct uec_mii_info *mii_info);
static void genmii_restart_aneg (struct uec_mii_info *mii_info);
static int gbit_config_aneg (struct uec_mii_info *mii_info);
static int genmii_config_aneg (struct uec_mii_info *mii_info);
static int genmii_update_link (struct uec_mii_info *mii_info);
static int genmii_read_status (struct uec_mii_info *mii_info);
u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
{
uec_private_t *ugeth = (uec_private_t *) dev->priv;
uec_mii_t *ug_regs;
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
u32 tmp_reg;
#if defined(CONFIG_BITBANGMII)
u32 i = 0;
for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
if (strncmp(dev->name, bitbang_phy_port[i],
sizeof(dev->name)) == 0) {
(void)bb_miiphy_write(NULL, mii_id, regnum, value);
return;
}
}
#endif /* CONFIG_BITBANGMII */
ug_regs = ugeth->uec_mii_regs;
/* Stop the MII management read cycle */
out_be32 (&ug_regs->miimcom, 0);
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32 (&ug_regs->miimadd, tmp_reg);
/* Setting up the MII Mangement Control Register with the value */
out_be32 (&ug_regs->miimcon, (u32) value);
sync();
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
}
/* Reads from register regnum in the PHY for device dev, */
/* returning the value. Clears miimcom first. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
{
uec_private_t *ugeth = (uec_private_t *) dev->priv;
uec_mii_t *ug_regs;
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
u32 tmp_reg;
u16 value;
#if defined(CONFIG_BITBANGMII)
u32 i = 0;
for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
if (strncmp(dev->name, bitbang_phy_port[i],
sizeof(dev->name)) == 0) {
(void)bb_miiphy_read(NULL, mii_id, regnum, &value);
return (value);
}
}
#endif /* CONFIG_BITBANGMII */
ug_regs = ugeth->uec_mii_regs;
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32 (&ug_regs->miimadd, tmp_reg);
/* clear MII management command cycle */
out_be32 (&ug_regs->miimcom, 0);
sync();
/* Perform an MII management read cycle */
out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) &
(MIIMIND_NOT_VALID | MIIMIND_BUSY));
/* Read MII management status */
value = (u16) in_be32 (&ug_regs->miimstat);
if (value == 0xffff)
ugphy_vdbg
("read wrong value : mii_id %d,mii_reg %d, base %08x",
mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
return (value);
}
void mii_clear_phy_interrupt (struct uec_mii_info *mii_info)
{
if (mii_info->phyinfo->ack_interrupt)
mii_info->phyinfo->ack_interrupt (mii_info);
}
void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
u32 interrupts)
{
mii_info->interrupts = interrupts;
if (mii_info->phyinfo->config_intr)
mii_info->phyinfo->config_intr (mii_info);
}
/* Writes MII_ADVERTISE with the appropriate values, after
* sanitizing advertise to make sure only supported features
* are advertised
*/
static void config_genmii_advert (struct uec_mii_info *mii_info)
{
u32 advertise;
u16 adv;
/* Only allow advertising what this PHY supports */
mii_info->advertising &= mii_info->phyinfo->features;
advertise = mii_info->advertising;
/* Setup standard advertisement */
adv = uec_phy_read(mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
uec_phy_write(mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced (struct uec_mii_info *mii_info)
{
u16 ctrl;
u32 features = mii_info->phyinfo->features;
ctrl = uec_phy_read(mii_info, MII_BMCR);
ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
BMCR_SPEED1000 | BMCR_ANENABLE);
ctrl |= BMCR_RESET;
switch (mii_info->speed) {
case SPEED_1000:
if (features & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
ctrl |= BMCR_SPEED1000;
break;
}
mii_info->speed = SPEED_100;
case SPEED_100:
if (features & (SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full)) {
ctrl |= BMCR_SPEED100;
break;
}
mii_info->speed = SPEED_10;
case SPEED_10:
if (features & (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full))
break;
default: /* Unsupported speed! */
ugphy_err ("%s: Bad speed!", mii_info->dev->name);
break;
}
uec_phy_write(mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
static void genmii_restart_aneg (struct uec_mii_info *mii_info)
{
u16 ctl;
ctl = uec_phy_read(mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
uec_phy_write(mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg (struct uec_mii_info *mii_info)
{
u16 adv;
u32 advertise;
if (mii_info->autoneg) {
/* Configure the ADVERTISE register */
config_genmii_advert (mii_info);
advertise = mii_info->advertising;
adv = uec_phy_read(mii_info, MII_CTRL1000);
adv &= ~(ADVERTISE_1000FULL |
ADVERTISE_1000HALF);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= ADVERTISE_1000HALF;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= ADVERTISE_1000FULL;
uec_phy_write(mii_info, MII_CTRL1000, adv);
/* Start/Restart aneg */
genmii_restart_aneg (mii_info);
} else
genmii_setup_forced (mii_info);
return 0;
}
static int marvell_config_aneg (struct uec_mii_info *mii_info)
{
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
uec_phy_write(mii_info, 0x1d, 0x1f);
uec_phy_write(mii_info, 0x1e, 0x200c);
uec_phy_write(mii_info, 0x1d, 0x5);
uec_phy_write(mii_info, 0x1e, 0);
uec_phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg (mii_info);
return 0;
}
static int genmii_config_aneg (struct uec_mii_info *mii_info)
{
if (mii_info->autoneg) {
/* Speed up the common case, if link is already up, speed and
duplex match, skip auto neg as it already matches */
if (!genmii_read_status(mii_info) && mii_info->link)
if (mii_info->duplex == DUPLEX_FULL &&
mii_info->speed == SPEED_100)
if (mii_info->advertising &
ADVERTISED_100baseT_Full)
return 0;
config_genmii_advert (mii_info);
genmii_restart_aneg (mii_info);
} else
genmii_setup_forced (mii_info);
return 0;
}
static int genmii_update_link (struct uec_mii_info *mii_info)
{
u16 status;
/* Status is read once to clear old link state */
uec_phy_read(mii_info, MII_BMSR);
/*
* Wait if the link is up, and autonegotiation is in progress
* (ie - we're capable and it's not done)
*/
status = uec_phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
&& !(status & BMSR_ANEGCOMPLETE)) {
int i = 0;
while (!(status & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
if (i > UGETH_AN_TIMEOUT) {
mii_info->link = 0;
return 0;
}
i++;
udelay(1000); /* 1 ms */
status = uec_phy_read(mii_info, MII_BMSR);
}
mii_info->link = 1;
} else {
if (status & BMSR_LSTATUS)
mii_info->link = 1;
else
mii_info->link = 0;
}
return 0;
}
static int genmii_read_status (struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link (mii_info);
if (err)
return err;
if (mii_info->autoneg) {
status = uec_phy_read(mii_info, MII_STAT1000);
if (status & (LPA_1000FULL | LPA_1000HALF)) {
mii_info->speed = SPEED_1000;
if (status & LPA_1000FULL)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
} else {
status = uec_phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
if (status & (LPA_100FULL | LPA_100HALF))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
}
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
static int bcm_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
gbit_config_aneg(mii_info);
if ((uec->uec_info->enet_interface_type ==
PHY_INTERFACE_MODE_RGMII_RXID) &&
(uec->uec_info->speed == SPEED_1000)) {
u16 val;
int cnt = 50;
/* Wait for aneg to complete. */
do
val = uec_phy_read(mii_info, MII_BMSR);
while (--cnt && !(val & BMSR_ANEGCOMPLETE));
/* Set RDX clk delay. */
uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12));
val = uec_phy_read(mii_info, 0x18);
/* Set RDX-RXC skew. */
val |= (1 << 8);
val |= (7 | (7 << 12));
/* Write bits 14:0. */
val |= (1 << 15);
uec_phy_write(mii_info, 0x18, val);
}
return 0;
}
static int uec_marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
phy_interface_t iface = uec->uec_info->enet_interface_type;
int speed = uec->uec_info->speed;
if ((speed == SPEED_1000) &&
(iface == PHY_INTERFACE_MODE_RGMII_ID ||
iface == PHY_INTERFACE_MODE_RGMII_RXID ||
iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
} else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
} else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR);
temp &= ~MII_M1111_HWCFG_MODE_MASK;
temp |= MII_M1111_HWCFG_MODE_RGMII;
uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
}
return 0;
}
static int marvell_read_status (struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link (mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
/* Get the speed */
speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
switch (speed) {
case MII_M1011_PHY_SPEC_STATUS_1000:
mii_info->speed = SPEED_1000;
break;
case MII_M1011_PHY_SPEC_STATUS_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
mii_info->pause = 0;
}
return 0;
}
static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupts by reading the reg */
uec_phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
static int marvell_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
uec_phy_write(mii_info, MII_M1011_IMASK,
MII_M1011_IMASK_CLEAR);
return 0;
}
static int dm9161_init (struct uec_mii_info *mii_info)
{
/* Reset the PHY */
uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) |
BMCR_RESET);
/* PHY and MAC connect */
uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) &
~BMCR_ISOLATE);
uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
config_genmii_advert (mii_info);
/* Start/restart aneg */
genmii_config_aneg (mii_info);
return 0;
}
static int dm9161_config_aneg (struct uec_mii_info *mii_info)
{
return 0;
}
static int dm9161_read_status (struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there was an error */
err = genmii_update_link (mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex
If we aren't autonegotiating assume speeds are as set */
if (mii_info->autoneg && mii_info->link) {
status = uec_phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
}
return 0;
}
static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupt by reading the reg */
uec_phy_read(mii_info, MII_DM9161_INTR);
return 0;
}
static int dm9161_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
static void dm9161_close (struct uec_mii_info *mii_info)
{
}
static int fixed_phy_aneg (struct uec_mii_info *mii_info)
{
mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
return 0;
}
static int fixed_phy_read_status (struct uec_mii_info *mii_info)
{
int i = 0;
for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
strlen(mii_info->dev->name)) == 0) {
mii_info->speed = fixed_phy_port[i].speed;
mii_info->duplex = fixed_phy_port[i].duplex;
mii_info->link = 1; /* Link is always UP */
mii_info->pause = 0;
break;
}
}
return 0;
}
static int smsc_config_aneg (struct uec_mii_info *mii_info)
{
return 0;
}
static int smsc_read_status (struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link (mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int val;
status = uec_phy_read(mii_info, 0x1f);
val = (status & 0x1c) >> 2;
switch (val) {
case 1:
mii_info->duplex = DUPLEX_HALF;
mii_info->speed = SPEED_10;
break;
case 5:
mii_info->duplex = DUPLEX_FULL;
mii_info->speed = SPEED_10;
break;
case 2:
mii_info->duplex = DUPLEX_HALF;
mii_info->speed = SPEED_100;
break;
case 6:
mii_info->duplex = DUPLEX_FULL;
mii_info->speed = SPEED_100;
break;
}
mii_info->pause = 0;
}
return 0;
}
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161E",
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.close = dm9161_close,
};
static struct phy_info phy_info_dm9161a = {
.phy_id = 0x0181b8a0,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161A",
.features = MII_BASIC_FEATURES,
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
.close = dm9161_close,
};
static struct phy_info phy_info_marvell = {
.phy_id = 0x01410c00,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
.init = &uec_marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
};
static struct phy_info phy_info_bcm5481 = {
.phy_id = 0x0143bca0,
.phy_id_mask = 0xffffff0,
.name = "Broadcom 5481",
.features = MII_GBIT_FEATURES,
.read_status = genmii_read_status,
.init = bcm_init,
};
static struct phy_info phy_info_fixedphy = {
.phy_id = CONFIG_FIXED_PHY,
.phy_id_mask = CONFIG_FIXED_PHY,
.name = "Fixed PHY",
.config_aneg = fixed_phy_aneg,
.read_status = fixed_phy_read_status,
};
static struct phy_info phy_info_smsclan8700 = {
.phy_id = 0x0007c0c0,
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8700",
.features = MII_BASIC_FEATURES,
.config_aneg = smsc_config_aneg,
.read_status = smsc_read_status,
};
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
.name = "Generic MII",
.features = MII_BASIC_FEATURES,
.config_aneg = genmii_config_aneg,
.read_status = genmii_read_status,
};
static struct phy_info *phy_info[] = {
&phy_info_dm9161,
&phy_info_dm9161a,
&phy_info_marvell,
&phy_info_bcm5481,
&phy_info_smsclan8700,
&phy_info_fixedphy,
&phy_info_genmii,
NULL
};
u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
{
return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
}
void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
{
mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
}
/* Use the PHY ID registers to determine what type of PHY is attached
* to device dev. return a struct phy_info structure describing that PHY
*/
struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
{
u16 phy_reg;
u32 phy_ID;
int i;
struct phy_info *theInfo = NULL;
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = uec_phy_read(mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = uec_phy_read(mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
/* matches the ID we read from the PHY. */
for (i = 0; phy_info[i]; i++)
if (phy_info[i]->phy_id ==
(phy_ID & phy_info[i]->phy_id_mask)) {
theInfo = phy_info[i];
break;
}
/* This shouldn't happen, as we have generic PHY support */
if (theInfo == NULL) {
ugphy_info ("UEC: PHY id %x is not supported!", phy_ID);
return NULL;
} else {
ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
}
return theInfo;
}
void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
int speed)
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
u16 status;
if (!uec->mii_info) {
printf ("%s: the PHY not initialized\n", __FUNCTION__);
return;
}
mii_info = uec->mii_info;
if (type == PHY_INTERFACE_MODE_RGMII) {
if (speed == SPEED_100) {
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x1d, 0x001f);
uec_phy_write(mii_info, 0x1e, 0x200c);
uec_phy_write(mii_info, 0x1d, 0x0005);
uec_phy_write(mii_info, 0x1e, 0x0000);
uec_phy_write(mii_info, 0x1e, 0x0100);
uec_phy_write(mii_info, 0x09, 0x0e00);
uec_phy_write(mii_info, 0x04, 0x01e1);
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x00, 0x1000);
udelay (100000);
uec_phy_write(mii_info, 0x00, 0x2900);
uec_phy_write(mii_info, 0x14, 0x0cd2);
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x09, 0x0000);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x04, 0x05e1);
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x00, 0x2100);
udelay (1000000);
} else if (speed == SPEED_10) {
uec_phy_write(mii_info, 0x14, 0x8e40);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x14, 0x0c82);
uec_phy_write(mii_info, 0x00, 0x8100);
udelay (1000000);
}
}
/* handle 88e1111 rev.B2 erratum 5.6 */
if (mii_info->autoneg) {
status = uec_phy_read(mii_info, MII_BMCR);
uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE);
}
/* now the B2 will correctly report autoneg completion status */
}
void change_phy_interface_mode (struct eth_device *dev,
phy_interface_t type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode (dev, type, speed);
#endif
}