u-boot/drivers/Kconfig
Faiz Abbas 7feafb0ae4 ufs: Add Initial Support for UFS subsystem
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:

- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests

Also register this host controller as a SCSI host controller.

Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00

141 lines
2.4 KiB
Text

menu "Device Drivers"
source "drivers/core/Kconfig"
# types of drivers sorted in alphabetical order
source "drivers/adc/Kconfig"
source "drivers/ata/Kconfig"
source "drivers/axi/Kconfig"
source "drivers/block/Kconfig"
source "drivers/bootcount/Kconfig"
source "drivers/cache/Kconfig"
source "drivers/clk/Kconfig"
source "drivers/cpu/Kconfig"
source "drivers/crypto/Kconfig"
source "drivers/ddr/Kconfig"
source "drivers/demo/Kconfig"
source "drivers/board/Kconfig"
source "drivers/ddr/fsl/Kconfig"
source "drivers/dfu/Kconfig"
source "drivers/dma/Kconfig"
source "drivers/fastboot/Kconfig"
source "drivers/firmware/Kconfig"
source "drivers/fpga/Kconfig"
source "drivers/gpio/Kconfig"
source "drivers/hwspinlock/Kconfig"
source "drivers/i2c/Kconfig"
source "drivers/input/Kconfig"
source "drivers/led/Kconfig"
source "drivers/mailbox/Kconfig"
source "drivers/memory/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/mmc/Kconfig"
source "drivers/mtd/Kconfig"
source "drivers/net/Kconfig"
source "drivers/nvme/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pci_endpoint/Kconfig"
source "drivers/pch/Kconfig"
source "drivers/phy/Kconfig"
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/marvell/Kconfig"
source "drivers/pinctrl/Kconfig"
source "drivers/power/Kconfig"
source "drivers/pwm/Kconfig"
source "drivers/qe/Kconfig"
source "drivers/ram/Kconfig"
source "drivers/remoteproc/Kconfig"
source "drivers/reset/Kconfig"
source "drivers/rtc/Kconfig"
source "drivers/scsi/Kconfig"
source "drivers/serial/Kconfig"
source "drivers/smem/Kconfig"
source "drivers/sound/Kconfig"
source "drivers/soc/Kconfig"
source "drivers/spi/Kconfig"
source "drivers/spmi/Kconfig"
source "drivers/sysreset/Kconfig"
source "drivers/tee/Kconfig"
source "drivers/thermal/Kconfig"
source "drivers/timer/Kconfig"
source "drivers/tpm/Kconfig"
source "drivers/usb/Kconfig"
source "drivers/ufs/Kconfig"
source "drivers/video/Kconfig"
source "drivers/virtio/Kconfig"
source "drivers/w1/Kconfig"
source "drivers/w1-eeprom/Kconfig"
source "drivers/watchdog/Kconfig"
config PHYS_TO_BUS
bool "Custom physical to bus address mapping"
help
Some SoCs use a different address map for CPU physical addresses and
peripheral DMA master accesses. If yours does, select this option in
your platform's Kconfig, and implement the appropriate mapping
functions in your platform's support code.
endmenu