u-boot/drivers/clk/at91/pmc.c
Claudiu Beznea 248e41002b clk: at91: pmc: export clock setup to pmc
Clock setup was intended for setting clocks at boot time on SAMA7G5,
e.g. for root clocks like PLLs, that were used to feed IPs needed alive
in u-boot (e.g. Ethernet clock feed by a PLL). Export this functionality
to all at91 clocks as it may be necessary on other SoCs.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2023-03-27 14:27:37 +03:00

164 lines
3.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Atmel Corporation
* Wenyou.Yang <wenyou.yang@atmel.com>
*/
#include <common.h>
#include <asm/io.h>
#include <clk-uclass.h>
#include <linux/clk-provider.h>
#include "pmc.h"
static int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
{
if (args->args_count != 2) {
debug("AT91: clk: Invalid args_count: %d\n", args->args_count);
return -EINVAL;
}
clk->id = AT91_TO_CLK_ID(args->args[0], args->args[1]);
return 0;
}
const struct clk_ops at91_clk_ops = {
.of_xlate = at91_clk_of_xlate,
.set_rate = ccf_clk_set_rate,
.get_rate = ccf_clk_get_rate,
.enable = ccf_clk_enable,
.disable = ccf_clk_disable,
};
/**
* pmc_read() - read content at address base + off into val
*
* @base: base address
* @off: offset to read from
* @val: where the content of base + off is stored
*
* @return: void
*/
void pmc_read(void __iomem *base, unsigned int off, unsigned int *val)
{
*val = readl(base + off);
}
/**
* pmc_write() - write content of val at address base + off
*
* @base: base address
* @off: offset to write to
* @val: content to be written at base + off
*
* @return: void
*/
void pmc_write(void __iomem *base, unsigned int off, unsigned int val)
{
writel(val, base + off);
}
/**
* pmc_update_bits() - update a set of bits at address base + off
*
* @base: base address
* @off: offset to be updated
* @mask: mask of bits to be updated
* @bits: the new value to be updated
*
* @return: void
*/
void pmc_update_bits(void __iomem *base, unsigned int off,
unsigned int mask, unsigned int bits)
{
unsigned int tmp;
tmp = readl(base + off);
tmp &= ~mask;
writel(tmp | (bits & mask), base + off);
}
/**
* at91_clk_mux_val_to_index() - get parent index in mux table
*
* @table: clock mux table
* @num_parents: clock number of parents
* @val: clock id who's mux index should be retrieved
*
* @return: clock index in mux table or a negative error number in case of
* failure
*/
int at91_clk_mux_val_to_index(const u32 *table, u32 num_parents, u32 val)
{
int i;
if (!table || !num_parents)
return -EINVAL;
for (i = 0; i < num_parents; i++) {
if (table[i] == val)
return i;
}
return -EINVAL;
}
/**
* at91_clk_mux_index_to_val() - get parent ID corresponding to an entry in
* clock's mux table
*
* @table: clock's mux table
* @num_parents: clock's number of parents
* @index: index in mux table which clock's ID should be retrieved
*
* @return: clock ID or a negative error number in case of failure
*/
int at91_clk_mux_index_to_val(const u32 *table, u32 num_parents, u32 index)
{
if (!table || !num_parents || index < 0 || index > num_parents)
return -EINVAL;
return table[index];
}
int at91_clk_setup(const struct pmc_clk_setup *setup, int size)
{
struct clk *c, *parent;
int i, ret;
if (!size)
return 0;
if (!setup)
return -EINVAL;
for (i = 0; i < size; i++) {
ret = clk_get_by_id(setup[i].cid, &c);
if (ret)
return ret;
if (setup[i].pid) {
ret = clk_get_by_id(setup[i].pid, &parent);
if (ret)
return ret;
ret = clk_set_parent(c, parent);
if (ret)
return ret;
if (setup[i].prate) {
ret = clk_set_rate(parent, setup[i].prate);
if (ret < 0)
return ret;
}
}
if (setup[i].rate) {
ret = clk_set_rate(c, setup[i].rate);
if (ret < 0)
return ret;
}
}
return 0;
}