mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
7229440772
Remove the redundant setting for USB_RX_EARLY_SIZE. Besides, for RTL8153B, it is necessary to notify the hardware of the changes of the aggregation settings. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
683 lines
17 KiB
C
683 lines
17 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2015 Realtek Semiconductor Corp. All rights reserved.
|
|
*
|
|
*/
|
|
|
|
#ifndef _RTL8152_ETH_H
|
|
#define _RTL8152_ETH_H
|
|
|
|
#include <linux/bitops.h>
|
|
#define R8152_BASE_NAME "r8152"
|
|
|
|
#define PLA_IDR 0xc000
|
|
#define PLA_RCR 0xc010
|
|
#define PLA_RMS 0xc016
|
|
#define PLA_RXFIFO_CTRL0 0xc0a0
|
|
#define PLA_RXFIFO_CTRL1 0xc0a4
|
|
#define PLA_RXFIFO_CTRL2 0xc0a8
|
|
#define PLA_DMY_REG0 0xc0b0
|
|
#define PLA_FMC 0xc0b4
|
|
#define PLA_CFG_WOL 0xc0b6
|
|
#define PLA_TEREDO_CFG 0xc0bc
|
|
#define PLA_MAR 0xcd00
|
|
#define PLA_BACKUP 0xd000
|
|
#define PLA_BDC_CR 0xd1a0
|
|
#define PLA_TEREDO_TIMER 0xd2cc
|
|
#define PLA_REALWOW_TIMER 0xd2e8
|
|
#define PLA_EXTRA_STATUS 0xd398
|
|
#define PLA_EFUSE_DATA 0xdd00
|
|
#define PLA_EFUSE_CMD 0xdd02
|
|
#define PLA_LEDSEL 0xdd90
|
|
#define PLA_LED_FEATURE 0xdd92
|
|
#define PLA_PHYAR 0xde00
|
|
#define PLA_BOOT_CTRL 0xe004
|
|
#define PLA_GPHY_INTR_IMR 0xe022
|
|
#define PLA_EEE_CR 0xe040
|
|
#define PLA_EEEP_CR 0xe080
|
|
#define PLA_MAC_PWR_CTRL 0xe0c0
|
|
#define PLA_MAC_PWR_CTRL2 0xe0ca
|
|
#define PLA_MAC_PWR_CTRL3 0xe0cc
|
|
#define PLA_MAC_PWR_CTRL4 0xe0ce
|
|
#define PLA_WDT6_CTRL 0xe428
|
|
#define PLA_TCR0 0xe610
|
|
#define PLA_TCR1 0xe612
|
|
#define PLA_MTPS 0xe615
|
|
#define PLA_TXFIFO_CTRL 0xe618
|
|
#define PLA_RSTTALLY 0xe800
|
|
#define BIST_CTRL 0xe810
|
|
#define PLA_CR 0xe813
|
|
#define PLA_CRWECR 0xe81c
|
|
#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */
|
|
#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */
|
|
#define PLA_CONFIG5 0xe822
|
|
#define PLA_PHY_PWR 0xe84c
|
|
#define PLA_OOB_CTRL 0xe84f
|
|
#define PLA_CPCR 0xe854
|
|
#define PLA_MISC_0 0xe858
|
|
#define PLA_MISC_1 0xe85a
|
|
#define PLA_OCP_GPHY_BASE 0xe86c
|
|
#define PLA_TALLYCNT 0xe890
|
|
#define PLA_SFF_STS_7 0xe8de
|
|
#define PLA_PHYSTATUS 0xe908
|
|
#define PLA_BP_BA 0xfc26
|
|
#define PLA_BP_0 0xfc28
|
|
#define PLA_BP_1 0xfc2a
|
|
#define PLA_BP_2 0xfc2c
|
|
#define PLA_BP_3 0xfc2e
|
|
#define PLA_BP_4 0xfc30
|
|
#define PLA_BP_5 0xfc32
|
|
#define PLA_BP_6 0xfc34
|
|
#define PLA_BP_7 0xfc36
|
|
#define PLA_BP_EN 0xfc38
|
|
|
|
#define USB_USB2PHY 0xb41e
|
|
#define USB_SSPHYLINK2 0xb428
|
|
#define USB_U2P3_CTRL 0xb460
|
|
#define USB_CSR_DUMMY1 0xb464
|
|
#define USB_CSR_DUMMY2 0xb466
|
|
#define USB_DEV_STAT 0xb808
|
|
#define USB_CONNECT_TIMER 0xcbf8
|
|
#define USB_MSC_TIMER 0xcbfc
|
|
#define USB_BURST_SIZE 0xcfc0
|
|
#define USB_FW_FIX_EN1 0xcfcc
|
|
#define USB_LPM_CONFIG 0xcfd8
|
|
#define USB_USB_CTRL 0xd406
|
|
#define USB_PHY_CTRL 0xd408
|
|
#define USB_TX_AGG 0xd40a
|
|
#define USB_RX_BUF_TH 0xd40c
|
|
#define USB_USB_TIMER 0xd428
|
|
#define USB_RX_EARLY_TIMEOUT 0xd42c
|
|
#define USB_RX_EARLY_SIZE 0xd42e
|
|
#define USB_PM_CTRL_STATUS 0xd432 /* RTL8153A */
|
|
#define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
|
|
#define USB_TX_DMA 0xd434
|
|
#define USB_UPT_RXDMA_OWN 0xd437
|
|
#define USB_TOLERANCE 0xd490
|
|
#define USB_LPM_CTRL 0xd41a
|
|
#define USB_BMU_RESET 0xd4b0
|
|
#define USB_U1U2_TIMER 0xd4da
|
|
#define USB_UPS_CTRL 0xd800
|
|
#define USB_POWER_CUT 0xd80a
|
|
#define USB_MISC_0 0xd81a
|
|
#define USB_AFE_CTRL2 0xd824
|
|
#define USB_UPS_CFG 0xd842
|
|
#define USB_WDT11_CTRL 0xe43c
|
|
#define USB_BP_BA PLA_BP_BA
|
|
#define USB_BP(n) (0xfc28 + 2 * (n))
|
|
#define USB_BP_EN PLA_BP_EN /* RTL8153A */
|
|
#define USB_BP2_EN 0xfc48
|
|
|
|
/* OCP Registers */
|
|
#define OCP_ALDPS_CONFIG 0x2010
|
|
#define OCP_EEE_CONFIG1 0x2080
|
|
#define OCP_EEE_CONFIG2 0x2092
|
|
#define OCP_EEE_CONFIG3 0x2094
|
|
#define OCP_BASE_MII 0xa400
|
|
#define OCP_EEE_AR 0xa41a
|
|
#define OCP_EEE_DATA 0xa41c
|
|
#define OCP_PHY_STATUS 0xa420
|
|
#define OCP_NCTL_CFG 0xa42c
|
|
#define OCP_POWER_CFG 0xa430
|
|
#define OCP_EEE_CFG 0xa432
|
|
#define OCP_SRAM_ADDR 0xa436
|
|
#define OCP_SRAM_DATA 0xa438
|
|
#define OCP_DOWN_SPEED 0xa442
|
|
#define OCP_EEE_ABLE 0xa5c4
|
|
#define OCP_EEE_ADV 0xa5d0
|
|
#define OCP_EEE_LPABLE 0xa5d2
|
|
#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
|
|
#define OCP_ADC_IOFFSET 0xbcfc
|
|
#define OCP_ADC_CFG 0xbc06
|
|
|
|
/* SRAM Register */
|
|
#define SRAM_GREEN_CFG 0x8011
|
|
#define SRAM_LPF_CFG 0x8012
|
|
#define SRAM_10M_AMP1 0x8080
|
|
#define SRAM_10M_AMP2 0x8082
|
|
#define SRAM_IMPEDANCE 0x8084
|
|
|
|
/* PLA_RCR */
|
|
#define RCR_AAP 0x00000001
|
|
#define RCR_APM 0x00000002
|
|
#define RCR_AM 0x00000004
|
|
#define RCR_AB 0x00000008
|
|
#define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
|
|
|
|
/* PLA_RXFIFO_CTRL0 */
|
|
#define RXFIFO_THR1_NORMAL 0x00080002
|
|
#define RXFIFO_THR1_OOB 0x01800003
|
|
|
|
/* PLA_RXFIFO_CTRL1 */
|
|
#define RXFIFO_THR2_FULL 0x00000060
|
|
#define RXFIFO_THR2_HIGH 0x00000038
|
|
#define RXFIFO_THR2_OOB 0x0000004a
|
|
#define RXFIFO_THR2_NORMAL 0x00a0
|
|
|
|
/* PLA_RXFIFO_CTRL2 */
|
|
#define RXFIFO_THR3_FULL 0x00000078
|
|
#define RXFIFO_THR3_HIGH 0x00000048
|
|
#define RXFIFO_THR3_OOB 0x0000005a
|
|
#define RXFIFO_THR3_NORMAL 0x0110
|
|
|
|
/* PLA_TXFIFO_CTRL */
|
|
#define TXFIFO_THR_NORMAL 0x00400008
|
|
#define TXFIFO_THR_NORMAL2 0x01000008
|
|
|
|
/* PLA_DMY_REG0 */
|
|
#define ECM_ALDPS 0x0002
|
|
|
|
/* PLA_FMC */
|
|
#define FMC_FCR_MCU_EN 0x0001
|
|
|
|
/* PLA_EEEP_CR */
|
|
#define EEEP_CR_EEEP_TX 0x0002
|
|
|
|
/* PLA_WDT6_CTRL */
|
|
#define WDT6_SET_MODE 0x0010
|
|
|
|
/* PLA_TCR0 */
|
|
#define TCR0_TX_EMPTY 0x0800
|
|
#define TCR0_AUTO_FIFO 0x0080
|
|
|
|
/* PLA_TCR1 */
|
|
#define VERSION_MASK 0x7cf0
|
|
|
|
/* PLA_MTPS */
|
|
#define MTPS_JUMBO (12 * 1024 / 64)
|
|
#define MTPS_DEFAULT (6 * 1024 / 64)
|
|
|
|
/* PLA_RSTTALLY */
|
|
#define TALLY_RESET 0x0001
|
|
|
|
/* PLA_CR */
|
|
#define PLA_CR_RST 0x10
|
|
#define PLA_CR_RE 0x08
|
|
#define PLA_CR_TE 0x04
|
|
|
|
/* PLA_BIST_CTRL */
|
|
#define BIST_CTRL_SW_RESET (0x10 << 24)
|
|
|
|
/* PLA_CRWECR */
|
|
#define CRWECR_NORAML 0x00
|
|
#define CRWECR_CONFIG 0xc0
|
|
|
|
/* PLA_OOB_CTRL */
|
|
#define NOW_IS_OOB 0x80
|
|
#define TXFIFO_EMPTY 0x20
|
|
#define RXFIFO_EMPTY 0x10
|
|
#define LINK_LIST_READY 0x02
|
|
#define DIS_MCU_CLROOB 0x01
|
|
#define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY)
|
|
|
|
/* PLA_PHY_PWR */
|
|
#define PLA_PHY_PWR_LLR (LINK_LIST_READY << 24)
|
|
#define PLA_PHY_PWR_TXEMP (TXFIFO_EMPTY << 24)
|
|
#define TEST_IO_OFF BIT(4)
|
|
|
|
/* PLA_MISC_1 */
|
|
#define RXDY_GATED_EN 0x0008
|
|
|
|
/* PLA_SFF_STS_7 */
|
|
#define RE_INIT_LL 0x8000
|
|
#define MCU_BORW_EN 0x4000
|
|
|
|
/* PLA_CPCR */
|
|
#define CPCR_RX_VLAN 0x0040
|
|
|
|
/* PLA_CFG_WOL */
|
|
#define MAGIC_EN 0x0001
|
|
|
|
/* PLA_TEREDO_CFG */
|
|
#define TEREDO_SEL 0x8000
|
|
#define TEREDO_WAKE_MASK 0x7f00
|
|
#define TEREDO_RS_EVENT_MASK 0x00fe
|
|
#define OOB_TEREDO_EN 0x0001
|
|
|
|
/* PLA_BDC_CR */
|
|
#define ALDPS_PROXY_MODE 0x0001
|
|
|
|
/* PLA_EFUSE_CMD */
|
|
#define EFUSE_READ_CMD BIT(15)
|
|
#define EFUSE_DATA_BIT16 BIT(7)
|
|
|
|
/* PLA_CONFIG34 */
|
|
#define LINK_ON_WAKE_EN 0x0010
|
|
#define LINK_OFF_WAKE_EN 0x0008
|
|
|
|
/* PLA_CONFIG5 */
|
|
#define BWF_EN 0x0040
|
|
#define MWF_EN 0x0020
|
|
#define UWF_EN 0x0010
|
|
#define LAN_WAKE_EN 0x0002
|
|
|
|
/* PLA_LED_FEATURE */
|
|
#define LED_MODE_MASK 0x0700
|
|
|
|
/* PLA_PHY_PWR */
|
|
#define TX_10M_IDLE_EN 0x0080
|
|
#define PFM_PWM_SWITCH 0x0040
|
|
|
|
/* PLA_MAC_PWR_CTRL */
|
|
#define D3_CLK_GATED_EN 0x00004000
|
|
#define MCU_CLK_RATIO 0x07010f07
|
|
#define MCU_CLK_RATIO_MASK 0x0f0f0f0f
|
|
#define ALDPS_SPDWN_RATIO 0x0f87
|
|
|
|
/* PLA_MAC_PWR_CTRL2 */
|
|
#define EEE_SPDWN_RATIO 0x8007
|
|
#define MAC_CLK_SPDWN_EN BIT(15)
|
|
|
|
/* PLA_MAC_PWR_CTRL3 */
|
|
#define PLA_MCU_SPDWN_EN BIT(14)
|
|
#define PKT_AVAIL_SPDWN_EN 0x0100
|
|
#define SUSPEND_SPDWN_EN 0x0004
|
|
#define U1U2_SPDWN_EN 0x0002
|
|
#define L1_SPDWN_EN 0x0001
|
|
|
|
/* PLA_MAC_PWR_CTRL4 */
|
|
#define PWRSAVE_SPDWN_EN 0x1000
|
|
#define RXDV_SPDWN_EN 0x0800
|
|
#define TX10MIDLE_EN 0x0100
|
|
#define TP100_SPDWN_EN 0x0020
|
|
#define TP500_SPDWN_EN 0x0010
|
|
#define TP1000_SPDWN_EN 0x0008
|
|
#define EEE_SPDWN_EN 0x0001
|
|
|
|
/* PLA_GPHY_INTR_IMR */
|
|
#define GPHY_STS_MSK 0x0001
|
|
#define SPEED_DOWN_MSK 0x0002
|
|
#define SPDWN_RXDV_MSK 0x0004
|
|
#define SPDWN_LINKCHG_MSK 0x0008
|
|
|
|
/* PLA_PHYAR */
|
|
#define PHYAR_FLAG 0x80000000
|
|
|
|
/* PLA_EEE_CR */
|
|
#define EEE_RX_EN 0x0001
|
|
#define EEE_TX_EN 0x0002
|
|
|
|
/* PLA_BOOT_CTRL */
|
|
#define AUTOLOAD_DONE 0x0002
|
|
|
|
/* PLA_EXTRA_STATUS */
|
|
#define U3P3_CHECK_EN BIT(7)
|
|
|
|
/* USB_USB2PHY */
|
|
#define USB2PHY_SUSPEND 0x0001
|
|
#define USB2PHY_L1 0x0002
|
|
|
|
/* USB_SSPHYLINK2 */
|
|
#define pwd_dn_scale_mask 0x3ffe
|
|
#define pwd_dn_scale(x) ((x) << 1)
|
|
|
|
/* USB_CSR_DUMMY1 */
|
|
#define DYNAMIC_BURST 0x0001
|
|
|
|
/* USB_CSR_DUMMY2 */
|
|
#define EP4_FULL_FC 0x0001
|
|
|
|
/* USB_DEV_STAT */
|
|
#define STAT_SPEED_MASK 0x0006
|
|
#define STAT_SPEED_HIGH 0x0000
|
|
#define STAT_SPEED_FULL 0x0002
|
|
|
|
/* USB_FW_FIX_EN1 */
|
|
#define FW_IP_RESET_EN BIT(9)
|
|
|
|
/* USB_LPM_CONFIG */
|
|
#define LPM_U1U2_EN BIT(0)
|
|
|
|
/* USB_TX_AGG */
|
|
#define TX_AGG_MAX_THRESHOLD 0x03
|
|
|
|
/* USB_RX_BUF_TH */
|
|
#define RX_THR_SUPPER 0x0c350180
|
|
#define RX_THR_HIGH 0x7a120180
|
|
#define RX_THR_SLOW 0xffff0180
|
|
|
|
/* USB_RX_EARLY_TIMEOUT */
|
|
#define RX_AUXILIARY_TIMER 1264
|
|
|
|
/* USB_TX_DMA */
|
|
#define TEST_MODE_DISABLE 0x00000001
|
|
#define TX_SIZE_ADJUST1 0x00000100
|
|
|
|
/* USB_BMU_RESET */
|
|
#define BMU_RESET_EP_IN 0x01
|
|
#define BMU_RESET_EP_OUT 0x02
|
|
|
|
/* USB_UPT_RXDMA_OWN */
|
|
#define OWN_UPDATE BIT(0)
|
|
#define OWN_CLEAR BIT(1)
|
|
|
|
/* USB_UPS_CTRL */
|
|
#define POWER_CUT 0x0100
|
|
|
|
/* USB_PM_CTRL_STATUS */
|
|
#define RESUME_INDICATE 0x0001
|
|
|
|
/* USB_USB_CTRL */
|
|
#define RX_AGG_DISABLE 0x0010
|
|
#define RX_ZERO_EN 0x0080
|
|
|
|
/* USB_U2P3_CTRL */
|
|
#define U2P3_ENABLE 0x0001
|
|
|
|
/* USB_POWER_CUT */
|
|
#define PWR_EN 0x0001
|
|
#define PHASE2_EN 0x0008
|
|
|
|
/* USB_MISC_0 */
|
|
#define PCUT_STATUS 0x0001
|
|
|
|
/* USB_RX_EARLY_TIMEOUT */
|
|
#define COALESCE_SUPER 85000U
|
|
#define COALESCE_HIGH 250000U
|
|
#define COALESCE_SLOW 524280U
|
|
|
|
/* USB_WDT11_CTRL */
|
|
#define TIMER11_EN 0x0001
|
|
|
|
/* USB_LPM_CTRL */
|
|
/* bit 4 ~ 5: fifo empty boundary */
|
|
#define FIFO_EMPTY_1FB 0x30 /* 0x1fb * 64 = 32448 bytes */
|
|
/* bit 2 ~ 3: LMP timer */
|
|
#define LPM_TIMER_MASK 0x0c
|
|
#define LPM_TIMER_500MS 0x04 /* 500 ms */
|
|
#define LPM_TIMER_500US 0x0c /* 500 us */
|
|
#define ROK_EXIT_LPM 0x02
|
|
|
|
/* USB_AFE_CTRL2 */
|
|
#define SEN_VAL_MASK 0xf800
|
|
#define SEN_VAL_NORMAL 0xa000
|
|
#define SEL_RXIDLE 0x0100
|
|
|
|
/* USB_UPS_CFG */
|
|
#define SAW_CNT_1MS_MASK 0x0fff
|
|
|
|
/* OCP_ALDPS_CONFIG */
|
|
#define ENPWRSAVE 0x8000
|
|
#define ENPDNPS 0x0200
|
|
#define LINKENA 0x0100
|
|
#define DIS_SDSAVE 0x0010
|
|
|
|
/* OCP_PHY_STATUS */
|
|
#define PHY_STAT_MASK 0x0007
|
|
#define PHY_STAT_LAN_ON 3
|
|
#define PHY_STAT_PWRDN 5
|
|
|
|
/* OCP_NCTL_CFG */
|
|
#define PGA_RETURN_EN BIT(1)
|
|
|
|
/* OCP_POWER_CFG */
|
|
#define EEE_CLKDIV_EN 0x8000
|
|
#define EN_ALDPS 0x0004
|
|
#define EN_10M_PLLOFF 0x0001
|
|
|
|
/* OCP_EEE_CONFIG1 */
|
|
#define RG_TXLPI_MSK_HFDUP 0x8000
|
|
#define RG_MATCLR_EN 0x4000
|
|
#define EEE_10_CAP 0x2000
|
|
#define EEE_NWAY_EN 0x1000
|
|
#define TX_QUIET_EN 0x0200
|
|
#define RX_QUIET_EN 0x0100
|
|
#define sd_rise_time_mask 0x0070
|
|
#define sd_rise_time(x) (min((x), 7) << 4) /* bit 4 ~ 6 */
|
|
#define RG_RXLPI_MSK_HFDUP 0x0008
|
|
#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */
|
|
|
|
/* OCP_EEE_CONFIG2 */
|
|
#define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */
|
|
#define RG_DACQUIET_EN 0x0400
|
|
#define RG_LDVQUIET_EN 0x0200
|
|
#define RG_CKRSEL 0x0020
|
|
#define RG_EEEPRG_EN 0x0010
|
|
|
|
/* OCP_EEE_CONFIG3 */
|
|
#define fast_snr_mask 0xff80
|
|
#define fast_snr(x) (min((x), 0x1ff) << 7) /* bit 7 ~ 15 */
|
|
#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */
|
|
#define MSK_PH 0x0006 /* bit 0 ~ 3 */
|
|
|
|
/* OCP_EEE_AR */
|
|
/* bit[15:14] function */
|
|
#define FUN_ADDR 0x0000
|
|
#define FUN_DATA 0x4000
|
|
/* bit[4:0] device addr */
|
|
|
|
/* OCP_EEE_CFG */
|
|
#define CTAP_SHORT_EN 0x0040
|
|
#define EEE10_EN 0x0010
|
|
|
|
/* OCP_DOWN_SPEED */
|
|
#define EN_10M_BGOFF 0x0080
|
|
|
|
/* OCP_PHY_STATE */
|
|
#define TXDIS_STATE 0x01
|
|
#define ABD_STATE 0x02
|
|
|
|
/* OCP_ADC_CFG */
|
|
#define CKADSEL_L 0x0100
|
|
#define ADC_EN 0x0080
|
|
#define EN_EMI_L 0x0040
|
|
|
|
/* SRAM_GREEN_CFG */
|
|
#define GREEN_ETH_EN BIT(15)
|
|
#define R_TUNE_EN BIT(11)
|
|
|
|
/* SRAM_LPF_CFG */
|
|
#define LPF_AUTO_TUNE 0x8000
|
|
|
|
/* SRAM_10M_AMP1 */
|
|
#define GDAC_IB_UPALL 0x0008
|
|
|
|
/* SRAM_10M_AMP2 */
|
|
#define AMP_DN 0x0200
|
|
|
|
/* SRAM_IMPEDANCE */
|
|
#define RX_DRIVING_MASK 0x6000
|
|
|
|
#define RTL8152_MAX_TX 4
|
|
#define RTL8152_MAX_RX 10
|
|
#define INTBUFSIZE 2
|
|
#define CRC_SIZE 4
|
|
#define TX_ALIGN 4
|
|
#define RX_ALIGN 8
|
|
|
|
#define INTR_LINK 0x0004
|
|
|
|
#define RTL8152_REQT_READ 0xc0
|
|
#define RTL8152_REQT_WRITE 0x40
|
|
#define RTL8152_REQ_GET_REGS 0x05
|
|
#define RTL8152_REQ_SET_REGS 0x05
|
|
|
|
#define BYTE_EN_DWORD 0xff
|
|
#define BYTE_EN_WORD 0x33
|
|
#define BYTE_EN_BYTE 0x11
|
|
#define BYTE_EN_SIX_BYTES 0x3f
|
|
#define BYTE_EN_START_MASK 0x0f
|
|
#define BYTE_EN_END_MASK 0xf0
|
|
|
|
#define RTL8152_ETH_FRAME_LEN 1514
|
|
#define RTL8152_AGG_BUF_SZ 2048
|
|
|
|
#define RTL8152_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE)
|
|
#define RTL8153_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE)
|
|
#define RTL8152_TX_TIMEOUT (5 * HZ)
|
|
|
|
#define MCU_TYPE_PLA 0x0100
|
|
#define MCU_TYPE_USB 0x0000
|
|
|
|
/* The forced speed, 10Mb, 100Mb, gigabit. */
|
|
#define SPEED_10 10
|
|
#define SPEED_100 100
|
|
#define SPEED_1000 1000
|
|
|
|
#define SPEED_UNKNOWN -1
|
|
|
|
/* Duplex, half or full. */
|
|
#define DUPLEX_HALF 0x00
|
|
#define DUPLEX_FULL 0x01
|
|
#define DUPLEX_UNKNOWN 0xff
|
|
|
|
/* Enable or disable autonegotiation. */
|
|
#define AUTONEG_DISABLE 0x00
|
|
#define AUTONEG_ENABLE 0x01
|
|
|
|
/* Generic MII registers. */
|
|
#define MII_BMCR 0x00 /* Basic mode control register */
|
|
#define MII_BMSR 0x01 /* Basic mode status register */
|
|
#define MII_PHYSID1 0x02 /* PHYS ID 1 */
|
|
#define MII_PHYSID2 0x03 /* PHYS ID 2 */
|
|
#define MII_ADVERTISE 0x04 /* Advertisement control reg */
|
|
#define MII_LPA 0x05 /* Link partner ability reg */
|
|
#define MII_EXPANSION 0x06 /* Expansion register */
|
|
#define MII_CTRL1000 0x09 /* 1000BASE-T control */
|
|
#define MII_STAT1000 0x0a /* 1000BASE-T status */
|
|
#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
|
|
#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
|
|
#define MII_ESTATUS 0x0f /* Extended Status */
|
|
#define MII_DCOUNTER 0x12 /* Disconnect counter */
|
|
#define MII_FCSCOUNTER 0x13 /* False carrier counter */
|
|
#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
|
|
#define MII_RERRCOUNTER 0x15 /* Receive error counter */
|
|
#define MII_SREVISION 0x16 /* Silicon revision */
|
|
#define MII_RESV1 0x17 /* Reserved... */
|
|
#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
|
|
#define MII_PHYADDR 0x19 /* PHY address */
|
|
#define MII_RESV2 0x1a /* Reserved... */
|
|
#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
|
|
#define MII_NCONFIG 0x1c /* Network interface config */
|
|
|
|
#define TIMEOUT_RESOLUTION 50
|
|
#define PHY_CONNECT_TIMEOUT 5000
|
|
#define USB_BULK_SEND_TIMEOUT 5000
|
|
#define USB_BULK_RECV_TIMEOUT 5000
|
|
#define R8152_WAIT_TIMEOUT 2000
|
|
|
|
struct rx_desc {
|
|
__le32 opts1;
|
|
#define RD_CRC BIT(15)
|
|
#define RX_LEN_MASK 0x7fff
|
|
|
|
__le32 opts2;
|
|
#define RD_UDP_CS BIT(23)
|
|
#define RD_TCP_CS BIT(22)
|
|
#define RD_IPV6_CS BIT(20)
|
|
#define RD_IPV4_CS BIT(19)
|
|
|
|
__le32 opts3;
|
|
#define IPF BIT(23) /* IP checksum fail */
|
|
#define UDPF BIT(22) /* UDP checksum fail */
|
|
#define TCPF BIT(21) /* TCP checksum fail */
|
|
#define RX_VLAN_TAG BIT(16)
|
|
|
|
__le32 opts4;
|
|
__le32 opts5;
|
|
__le32 opts6;
|
|
};
|
|
|
|
struct tx_desc {
|
|
__le32 opts1;
|
|
#define TX_FS BIT(31) /* First segment of a packet */
|
|
#define TX_LS BIT(30) /* Final segment of a packet */
|
|
#define LGSEND BIT(29)
|
|
#define GTSENDV4 BIT(28)
|
|
#define GTSENDV6 BIT(27)
|
|
#define GTTCPHO_SHIFT 18
|
|
#define GTTCPHO_MAX 0x7fU
|
|
#define TX_LEN_MAX 0x3ffffU
|
|
|
|
__le32 opts2;
|
|
#define UDP_CS BIT(31) /* Calculate UDP/IP checksum */
|
|
#define TCP_CS BIT(30) /* Calculate TCP/IP checksum */
|
|
#define IPV4_CS BIT(29) /* Calculate IPv4 checksum */
|
|
#define IPV6_CS BIT(28) /* Calculate IPv6 checksum */
|
|
#define MSS_SHIFT 17
|
|
#define MSS_MAX 0x7ffU
|
|
#define TCPHO_SHIFT 17
|
|
#define TCPHO_MAX 0x7ffU
|
|
#define TX_VLAN_TAG BIT(16)
|
|
};
|
|
|
|
enum rtl_version {
|
|
RTL_VER_UNKNOWN = 0,
|
|
RTL_VER_01,
|
|
RTL_VER_02,
|
|
RTL_VER_03,
|
|
RTL_VER_04,
|
|
RTL_VER_05,
|
|
RTL_VER_06,
|
|
RTL_VER_07,
|
|
RTL_VER_08,
|
|
RTL_VER_09,
|
|
RTL_VER_MAX
|
|
};
|
|
|
|
enum rtl_register_content {
|
|
_1000bps = 0x10,
|
|
_100bps = 0x08,
|
|
_10bps = 0x04,
|
|
LINK_STATUS = 0x02,
|
|
FULL_DUP = 0x01,
|
|
};
|
|
|
|
struct r8152 {
|
|
struct usb_device *udev;
|
|
struct usb_interface *intf;
|
|
bool supports_gmii;
|
|
|
|
struct rtl_ops {
|
|
void (*init)(struct r8152 *);
|
|
int (*enable)(struct r8152 *);
|
|
void (*disable)(struct r8152 *);
|
|
void (*up)(struct r8152 *);
|
|
void (*down)(struct r8152 *);
|
|
void (*unload)(struct r8152 *);
|
|
} rtl_ops;
|
|
|
|
u32 coalesce;
|
|
u16 ocp_base;
|
|
|
|
u8 version;
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
struct ueth_data ueth;
|
|
#endif
|
|
};
|
|
|
|
int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
|
|
u16 size, void *data, u16 type);
|
|
int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
|
|
void *data, u16 type);
|
|
|
|
int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data);
|
|
int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
|
|
u16 size, void *data);
|
|
|
|
int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data);
|
|
int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
|
|
u16 size, void *data);
|
|
|
|
u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index);
|
|
void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data);
|
|
|
|
u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index);
|
|
void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data);
|
|
|
|
u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index);
|
|
void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data);
|
|
|
|
u16 ocp_reg_read(struct r8152 *tp, u16 addr);
|
|
void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data);
|
|
|
|
void sram_write(struct r8152 *tp, u16 addr, u16 data);
|
|
|
|
int r8152_wait_for_bit(struct r8152 *tp, bool ocp_reg, u16 type, u16 index,
|
|
const u32 mask, bool set, unsigned int timeout);
|
|
|
|
void r8152b_firmware(struct r8152 *tp);
|
|
void r8153_firmware(struct r8152 *tp);
|
|
void r8153b_firmware(struct r8152 *tp);
|
|
#endif
|