mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
4bc0104c97
This patch adds support for MediaTek MT7621 SoC. All files are dedicated for u-boot. The default build target is u-boot-mt7621.bin. The specification of this chip: https://www.mediatek.com/products/homenetworking/mt7621 Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
246 lines
6.9 KiB
C
246 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2022 MediaTek Inc. All rights reserved.
|
|
*
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dm/uclass.h>
|
|
#include <dt-bindings/clock/mt7621-clk.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/io.h>
|
|
#include <linux/bitfield.h>
|
|
#include "mt7621.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const char *const boot_mode[(CHIP_MODE_M >> CHIP_MODE_S) + 1] = {
|
|
[1] = "NAND 2K+64",
|
|
[2] = "SPI-NOR 3-Byte Addr",
|
|
[3] = "SPI-NOR 4-Byte Addr",
|
|
[10] = "NAND 2K+128",
|
|
[11] = "NAND 4K+128",
|
|
[12] = "NAND 4K+256",
|
|
};
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
|
u32 val, ver, eco, pkg, core, dram, chipmode;
|
|
u32 cpu_clk, ddr_clk, bus_clk, xtal_clk;
|
|
struct udevice *clkdev;
|
|
const char *bootdev;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
val = readl(sysc + SYSCTL_CHIP_REV_ID_REG);
|
|
ver = FIELD_GET(VER_ID_M, val);
|
|
eco = FIELD_GET(ECO_ID_M, val);
|
|
pkg = FIELD_GET(PKG_ID, val);
|
|
core = FIELD_GET(CPU_ID, val);
|
|
|
|
val = readl(sysc + SYSCTL_SYSCFG0_REG);
|
|
dram = FIELD_GET(DRAM_TYPE, val);
|
|
chipmode = FIELD_GET(CHIP_MODE_M, val);
|
|
|
|
bootdev = boot_mode[chipmode];
|
|
if (!bootdev)
|
|
bootdev = "Unsupported boot mode";
|
|
|
|
printf("CPU: MediaTek MT7621%c ver %u, eco %u\n",
|
|
core ? (pkg ? 'A' : 'N') : 'S', ver, eco);
|
|
|
|
printf("Boot: DDR%u, %s\n", dram ? 2 : 3, bootdev);
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(mt7621_clk),
|
|
&clkdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk.dev = clkdev;
|
|
|
|
clk.id = MT7621_CLK_CPU;
|
|
cpu_clk = clk_get_rate(&clk);
|
|
|
|
clk.id = MT7621_CLK_BUS;
|
|
bus_clk = clk_get_rate(&clk);
|
|
|
|
clk.id = MT7621_CLK_DDR;
|
|
ddr_clk = clk_get_rate(&clk);
|
|
|
|
clk.id = MT7621_CLK_XTAL;
|
|
xtal_clk = clk_get_rate(&clk);
|
|
|
|
/* Set final timer frequency */
|
|
if (cpu_clk)
|
|
gd->arch.timer_freq = cpu_clk / 2;
|
|
|
|
printf("Clock: CPU: %uMHz, DDR: %uMT/s, Bus: %uMHz, XTAL: %uMHz\n",
|
|
cpu_clk / 1000000, ddr_clk / 500000, bus_clk / 1000000,
|
|
xtal_clk / 1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_xtal_mhz(void)
|
|
{
|
|
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
|
u32 bs, xtal_sel;
|
|
|
|
bs = readl(sysc + SYSCTL_SYSCFG0_REG);
|
|
xtal_sel = FIELD_GET(XTAL_MODE_SEL_M, bs);
|
|
|
|
if (xtal_sel <= 2)
|
|
return 20;
|
|
else if (xtal_sel <= 5)
|
|
return 40;
|
|
else
|
|
return 25;
|
|
}
|
|
|
|
static void xhci_config_40mhz(void __iomem *usbh)
|
|
{
|
|
writel(FIELD_PREP(SSUSB_MAC3_SYS_CK_GATE_MASK_TIME_M, 0x20) |
|
|
FIELD_PREP(SSUSB_MAC2_SYS_CK_GATE_MASK_TIME_M, 0x20) |
|
|
FIELD_PREP(SSUSB_MAC3_SYS_CK_GATE_MODE_M, 2) |
|
|
FIELD_PREP(SSUSB_MAC2_SYS_CK_GATE_MODE_M, 2) | 0x10,
|
|
usbh + SSUSB_MAC_CK_CTRL_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_PREDIV_PE1D_M, 2) |
|
|
FIELD_PREP(SSUSB_PLL_PREDIV_U3_M, 1) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDI_M, 4),
|
|
usbh + DA_SSUSB_U3PHYA_10_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_FBKDIV_PE2H_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_PE1D_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_PE1H_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_U3_M, 0x1e),
|
|
usbh + DA_SSUSB_PLL_FBKDIV_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_PCW_NCPO_U3_M, 0x1e400000),
|
|
usbh + DA_SSUSB_PLL_PCW_NCPO_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_DELTA1_PE1H_M, 0x25) |
|
|
FIELD_PREP(SSUSB_PLL_SSC_DELTA1_U3_M, 0x73),
|
|
usbh + DA_SSUSB_PLL_SSC_DELTA1_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_DELTA_U3_M, 0x71) |
|
|
FIELD_PREP(SSUSB_PLL_SSC_DELTA1_PE2D_M, 0x4a),
|
|
usbh + DA_SSUSB_U3PHYA_21_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_PRD_M, 0x140),
|
|
usbh + SSUSB_U3PHYA_9_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_SYSPLL_PCW_NCPO_M, 0x11c00000),
|
|
usbh + SSUSB_U3PHYA_3_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PCIE_CLKDRV_AMP_M, 4) |
|
|
FIELD_PREP(SSUSB_SYSPLL_FBSEL_M, 1) |
|
|
FIELD_PREP(SSUSB_SYSPLL_PREDIV_M, 1),
|
|
usbh + SSUSB_U3PHYA_1_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_SYSPLL_FBDIV_M, 0x12) |
|
|
SSUSB_SYSPLL_VCO_DIV_SEL | SSUSB_SYSPLL_FPEN |
|
|
SSUSB_SYSPLL_MONCK_EN | SSUSB_SYSPLL_VOD_EN,
|
|
usbh + SSUSB_U3PHYA_2_REG);
|
|
|
|
writel(SSUSB_EQ_CURSEL | FIELD_PREP(SSUSB_RX_DAC_MUX_M, 8) |
|
|
FIELD_PREP(SSUSB_PCIE_SIGDET_VTH_M, 1) |
|
|
FIELD_PREP(SSUSB_PCIE_SIGDET_LPF_M, 1),
|
|
usbh + SSUSB_U3PHYA_11_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_RING_OSC_CNTEND_M, 0x1ff) |
|
|
FIELD_PREP(SSUSB_XTAL_OSC_CNTEND_M, 0x7f) |
|
|
SSUSB_RING_BYPASS_DET,
|
|
usbh + SSUSB_B2_ROSC_0_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_RING_OSC_FRC_RECAL_M, 3) |
|
|
SSUSB_RING_OSC_FRC_SEL,
|
|
usbh + SSUSB_B2_ROSC_1_REG);
|
|
}
|
|
|
|
static void xhci_config_25mhz(void __iomem *usbh)
|
|
{
|
|
writel(FIELD_PREP(SSUSB_MAC3_SYS_CK_GATE_MASK_TIME_M, 0x20) |
|
|
FIELD_PREP(SSUSB_MAC2_SYS_CK_GATE_MASK_TIME_M, 0x20) |
|
|
FIELD_PREP(SSUSB_MAC3_SYS_CK_GATE_MODE_M, 2) |
|
|
FIELD_PREP(SSUSB_MAC2_SYS_CK_GATE_MODE_M, 2) | 0x10,
|
|
usbh + SSUSB_MAC_CK_CTRL_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_PREDIV_PE1D_M, 2) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDI_M, 4),
|
|
usbh + DA_SSUSB_U3PHYA_10_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_FBKDIV_PE2H_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_PE1D_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_PE1H_M, 0x18) |
|
|
FIELD_PREP(SSUSB_PLL_FBKDIV_U3_M, 0x19),
|
|
usbh + DA_SSUSB_PLL_FBKDIV_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_PCW_NCPO_U3_M, 0x18000000),
|
|
usbh + DA_SSUSB_PLL_PCW_NCPO_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_DELTA1_PE1H_M, 0x25) |
|
|
FIELD_PREP(SSUSB_PLL_SSC_DELTA1_U3_M, 0x4a),
|
|
usbh + DA_SSUSB_PLL_SSC_DELTA1_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_DELTA_U3_M, 0x48) |
|
|
FIELD_PREP(SSUSB_PLL_SSC_DELTA1_PE2D_M, 0x4a),
|
|
usbh + DA_SSUSB_U3PHYA_21_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PLL_SSC_PRD_M, 0x190),
|
|
usbh + SSUSB_U3PHYA_9_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_SYSPLL_PCW_NCPO_M, 0xe000000),
|
|
usbh + SSUSB_U3PHYA_3_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_PCIE_CLKDRV_AMP_M, 4) |
|
|
FIELD_PREP(SSUSB_SYSPLL_FBSEL_M, 1),
|
|
usbh + SSUSB_U3PHYA_1_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_SYSPLL_FBDIV_M, 0xf) |
|
|
SSUSB_SYSPLL_VCO_DIV_SEL | SSUSB_SYSPLL_FPEN |
|
|
SSUSB_SYSPLL_MONCK_EN | SSUSB_SYSPLL_VOD_EN,
|
|
usbh + SSUSB_U3PHYA_2_REG);
|
|
|
|
writel(SSUSB_EQ_CURSEL | FIELD_PREP(SSUSB_RX_DAC_MUX_M, 8) |
|
|
FIELD_PREP(SSUSB_PCIE_SIGDET_VTH_M, 1) |
|
|
FIELD_PREP(SSUSB_PCIE_SIGDET_LPF_M, 1),
|
|
usbh + SSUSB_U3PHYA_11_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_RING_OSC_CNTEND_M, 0x1ff) |
|
|
FIELD_PREP(SSUSB_XTAL_OSC_CNTEND_M, 0x7f) |
|
|
SSUSB_RING_BYPASS_DET,
|
|
usbh + SSUSB_B2_ROSC_0_REG);
|
|
|
|
writel(FIELD_PREP(SSUSB_RING_OSC_FRC_RECAL_M, 3) |
|
|
SSUSB_RING_OSC_FRC_SEL,
|
|
usbh + SSUSB_B2_ROSC_1_REG);
|
|
}
|
|
|
|
void lowlevel_init(void)
|
|
{
|
|
void __iomem *usbh = ioremap_nocache(SSUSB_BASE, SSUSB_SIZE);
|
|
u32 xtal = get_xtal_mhz();
|
|
|
|
/* Setup USB xHCI */
|
|
if (xtal == 40)
|
|
xhci_config_40mhz(usbh);
|
|
else if (xtal == 25)
|
|
xhci_config_25mhz(usbh);
|
|
}
|
|
|
|
ulong notrace get_tbclk(void)
|
|
{
|
|
return gd->arch.timer_freq;
|
|
}
|
|
|
|
void _machine_restart(void)
|
|
{
|
|
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
|
|
|
while (1)
|
|
writel(SYS_RST, sysc + SYSCTL_RSTCTL_REG);
|
|
}
|