u-boot/include/configs/qemu-riscv.h
Lukas Auer e456a81935 riscv: qemu: add SPL configuration
Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL
enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The
configurations are meant to help the development of SPL on RISC-V.

The configurations enable RAM as the only SPL boot device. Images must
be loaded at address 0x80200000. In the default boot flow, U-Boot SPL
starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot
proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is
then started in supervisor mode by OpenSBI.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-26 16:07:42 +08:00

65 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/sizes.h>
#ifdef CONFIG_SPL
#define CONFIG_SPL_MAX_SIZE 0x00100000
#define CONFIG_SPL_BSS_START_ADDR 0x84000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
#endif
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
#define CONFIG_SYS_MALLOC_LEN SZ_8M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000
/* Environment options */
#define CONFIG_ENV_SIZE SZ_128K
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(QEMU, qemu, na) \
func(VIRTIO, virtio, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define BOOTENV_DEV_QEMU(devtypeu, devtypel, instance) \
"bootcmd_qemu=" \
"if env exists kernel_start; then " \
"bootm ${kernel_start} - ${fdtcontroladdr};" \
"fi;\0"
#define BOOTENV_DEV_NAME_QEMU(devtypeu, devtypel, instance) \
"qemu "
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr_r=0x84000000\0" \
"fdt_addr_r=0x88000000\0" \
"scriptaddr=0x88100000\0" \
"pxefile_addr_r=0x88200000\0" \
"ramdisk_addr_r=0x88300000\0" \
BOOTENV
#endif
#endif /* __CONFIG_H */