mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 21:24:29 +00:00
502980914b
There are no higher 16 writing corresponding bits for pmu_gpio0's iomux/drive/pull at rk3288, need to read the value from register firstly. Add the flag to distinguish it from normal registers. Signed-off-by: David Wu <david.wu@rock-chips.com>
166 lines
4.4 KiB
C
166 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static struct rockchip_mux_route_data rk3288_mux_route_data[] = {
|
|
{
|
|
/* edphdmi_cecinoutt1 */
|
|
.bank_num = 7,
|
|
.pin = 16,
|
|
.func = 2,
|
|
.route_offset = 0x264,
|
|
.route_val = BIT(16 + 12) | BIT(12),
|
|
}, {
|
|
/* edphdmi_cecinout */
|
|
.bank_num = 7,
|
|
.pin = 23,
|
|
.func = 4,
|
|
.route_offset = 0x264,
|
|
.route_val = BIT(16 + 12),
|
|
},
|
|
};
|
|
|
|
#define RK3288_PULL_OFFSET 0x140
|
|
#define RK3288_PULL_PMU_OFFSET 0x64
|
|
|
|
static void rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3288_PULL_PMU_OFFSET;
|
|
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
*bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG;
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3288_PULL_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
}
|
|
}
|
|
|
|
#define RK3288_DRV_PMU_OFFSET 0x70
|
|
#define RK3288_DRV_GRF_OFFSET 0x1c0
|
|
|
|
static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3288_DRV_PMU_OFFSET;
|
|
|
|
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
|
|
*bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG;
|
|
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3288_DRV_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
|
|
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
|
|
}
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3288_pin_banks[] = {
|
|
PIN_BANK_IOMUX_DRV_PULL_FLAGS(0, 24, "gpio0",
|
|
IOMUX_SOURCE_PMU | IOMUX_WRITABLE_32BIT,
|
|
IOMUX_SOURCE_PMU | IOMUX_WRITABLE_32BIT,
|
|
IOMUX_SOURCE_PMU | IOMUX_WRITABLE_32BIT,
|
|
IOMUX_UNROUTED,
|
|
DRV_TYPE_WRITABLE_32BIT,
|
|
DRV_TYPE_WRITABLE_32BIT,
|
|
DRV_TYPE_WRITABLE_32BIT,
|
|
0,
|
|
PULL_TYPE_WRITABLE_32BIT,
|
|
PULL_TYPE_WRITABLE_32BIT,
|
|
PULL_TYPE_WRITABLE_32BIT,
|
|
0
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED,
|
|
IOMUX_UNROUTED,
|
|
IOMUX_UNROUTED,
|
|
0
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED),
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT),
|
|
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
0,
|
|
0
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED,
|
|
0,
|
|
0,
|
|
IOMUX_UNROUTED
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED),
|
|
PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0,
|
|
0,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_UNROUTED
|
|
),
|
|
PIN_BANK(8, 16, "gpio8"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
|
|
.pin_banks = rk3288_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3288_pin_banks),
|
|
.label = "RK3288-GPIO",
|
|
.type = RK3288,
|
|
.grf_mux_offset = 0x0,
|
|
.pmu_mux_offset = 0x84,
|
|
.iomux_routes = rk3288_mux_route_data,
|
|
.niomux_routes = ARRAY_SIZE(rk3288_mux_route_data),
|
|
.pull_calc_reg = rk3288_calc_pull_reg_and_bit,
|
|
.drv_calc_reg = rk3288_calc_drv_reg_and_bit,
|
|
};
|
|
|
|
static const struct udevice_id rk3288_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3288-pinctrl",
|
|
.data = (ulong)&rk3288_pin_ctrl
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_rk3288) = {
|
|
.name = "rockchip_rk3288_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3288_pinctrl_ids,
|
|
.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|