mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
258ce79cfc
Add support for xilinx multirate(MRMAC) ethernet driver. This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC. Added support for 4 ports of MRMAC for speeds 10G and 25G. MCDMA supports upto 16 channels but in this driver we have setup only one channel which is enough. Tested 10G and 25G on all 4 ports. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
203 lines
6.1 KiB
C
203 lines
6.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Xilinx Multirate Ethernet MAC(MRMAC) driver
|
|
*
|
|
* Author(s): Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*
|
|
* Copyright (C) 2021 Xilinx, Inc. All rights reserved.
|
|
*/
|
|
|
|
#ifndef __XILINX_AXI_MRMAC_H
|
|
#define __XILINX_AXI_MRMAC_H
|
|
|
|
#define MIN_PKT_SIZE 60
|
|
|
|
/* MRMAC needs atleast two buffer descriptors for Tx/Rx to work.
|
|
* Otherwise MRMAC will drop the packets. So, have atleast two Tx and
|
|
* two Rx bd's.
|
|
*/
|
|
#define TX_DESC 2
|
|
#define RX_DESC 2
|
|
|
|
/* MRMAC platform data structure */
|
|
struct axi_mrmac_plat {
|
|
struct eth_pdata eth_pdata;
|
|
struct mcdma_common_regs *mm2s_cmn;
|
|
u32 mrmac_rate; /* Hold the value from DT property "mrmac-rate" */
|
|
};
|
|
|
|
/* MRMAC private driver structure */
|
|
struct axi_mrmac_priv {
|
|
struct mrmac_regs *iobase;
|
|
struct mcdma_common_regs *mm2s_cmn;
|
|
struct mcdma_common_regs *s2mm_cmn;
|
|
struct mcdma_chan_reg *mcdma_tx;
|
|
struct mcdma_chan_reg *mcdma_rx;
|
|
struct mcdma_bd *tx_bd[TX_DESC];
|
|
struct mcdma_bd *rx_bd[RX_DESC];
|
|
u8 *txminframe; /* Pointer to hold min length Tx frame(60) */
|
|
u32 mrmac_rate; /* Speed to configure(Read from DT 10G/25G..) */
|
|
};
|
|
|
|
/* MRMAC Register Definitions */
|
|
struct mrmac_regs {
|
|
u32 revision; /* 0x0: Revision Register */
|
|
u32 reset; /* 0x4: Reset Register */
|
|
u32 mode; /* 0x8: Mode */
|
|
u32 tx_config; /* 0xc: Tx Configuration */
|
|
u32 rx_config; /* 0x10: Rx Configuration */
|
|
u32 reserved[6];/* 0x14-0x28: Reserved */
|
|
u32 tick_reg; /* 0x2c: Tick Register */
|
|
};
|
|
|
|
#define TX_BD_TOTAL_SIZE (TX_DESC * sizeof(struct mcdma_bd))
|
|
#define RX_BD_TOTAL_SIZE (RX_DESC * sizeof(struct mcdma_bd))
|
|
|
|
#define RX_BUFF_TOTAL_SIZE (RX_DESC * PKTSIZE_ALIGN)
|
|
|
|
/* Status Registers */
|
|
#define MRMAC_TX_STS_OFFSET 0x740
|
|
#define MRMAC_RX_STS_OFFSET 0x744
|
|
#define MRMAC_TX_RT_STS_OFFSET 0x748
|
|
#define MRMAC_RX_RT_STS_OFFSET 0x74c
|
|
#define MRMAC_STATRX_BLKLCK_OFFSET 0x754
|
|
|
|
/* Register bit masks */
|
|
#define MRMAC_RX_SERDES_RST_MASK (BIT(3) | BIT(2) | BIT(1) | BIT(0))
|
|
#define MRMAC_TX_SERDES_RST_MASK BIT(4)
|
|
#define MRMAC_RX_RST_MASK BIT(5)
|
|
#define MRMAC_TX_RST_MASK BIT(6)
|
|
#define MRMAC_RX_AXI_RST_MASK BIT(8)
|
|
#define MRMAC_TX_AXI_RST_MASK BIT(9)
|
|
#define MRMAC_STS_ALL_MASK 0xffffffff
|
|
|
|
#define MRMAC_RX_EN_MASK BIT(0)
|
|
#define MRMAC_RX_DEL_FCS_MASK BIT(1)
|
|
|
|
#define MRMAC_TX_EN_MASK BIT(0)
|
|
#define MRMAC_TX_INS_FCS_MASK BIT(1)
|
|
|
|
#define MRMAC_RX_BLKLCK_MASK BIT(0)
|
|
|
|
#define MRMAC_TICK_TRIGGER BIT(0)
|
|
|
|
#define MRMAC_RESET_DELAY 1 /* Delay in msecs */
|
|
#define MRMAC_BLKLCK_TIMEOUT 100 /* Block lock timeout in msecs */
|
|
#define MRMAC_DMARST_TIMEOUT 500 /* MCDMA reset timeout in msecs */
|
|
|
|
#define XMCDMA_RX_OFFSET 0x500
|
|
#define XMCDMA_CHAN_OFFSET 0x40
|
|
|
|
/* MCDMA Channel numbers are from 1-16 */
|
|
#define XMCDMA_CHANNEL_1 BIT(0)
|
|
#define XMCDMA_CHANNEL_2 BIT(1)
|
|
|
|
#define XMCDMA_CR_RUNSTOP BIT(0)
|
|
#define XMCDMA_CR_RESET BIT(2)
|
|
|
|
#define XMCDMA_BD_CTRL_TXSOF_MASK BIT(31) /* First tx packet */
|
|
#define XMCDMA_BD_CTRL_TXEOF_MASK BIT(30) /* Last tx packet */
|
|
#define XMCDMA_BD_CTRL_ALL_MASK GENMASK(31, 30) /* All control bits */
|
|
#define XMCDMA_BD_STS_ALL_MASK GENMASK(31, 28) /* All status bits */
|
|
|
|
/* MCDMA Mask registers */
|
|
#define XMCDMA_CR_RUNSTOP_MASK BIT(0) /* Start/stop DMA channel */
|
|
#define XMCDMA_CR_RESET_MASK BIT(2) /* Reset DMA engine */
|
|
|
|
#define XMCDMA_SR_HALTED_MASK BIT(0)
|
|
#define XMCDMA_SR_IDLE_MASK BIT(1)
|
|
|
|
#define XMCDMA_CH_IDLE BIT(0)
|
|
|
|
#define XMCDMA_BD_STS_COMPLETE BIT(31) /* Completed */
|
|
#define XMCDMA_BD_STS_DEC_ERR BIT(20) /* Decode error */
|
|
#define XMCDMA_BD_STS_SLV_ERR BIT(29) /* Slave error */
|
|
#define XMCDMA_BD_STS_INT_ERR BIT(28) /* Internal err */
|
|
#define XMCDMA_BD_STS_ALL_ERR GENMASK(30, 28) /* All errors */
|
|
|
|
#define XMCDMA_IRQ_ERRON_OTHERQ_MASK BIT(3)
|
|
#define XMCDMA_IRQ_PKTDROP_MASK BIT(4)
|
|
#define XMCDMA_IRQ_IOC_MASK BIT(5)
|
|
#define XMCDMA_IRQ_DELAY_MASK BIT(6)
|
|
#define XMCDMA_IRQ_ERR_MASK BIT(7)
|
|
#define XMCDMA_IRQ_ALL_MASK GENMASK(7, 5)
|
|
#define XMCDMA_PKTDROP_COALESCE_MASK GENMASK(15, 8)
|
|
#define XMCDMA_COALESCE_MASK GENMASK(23, 16)
|
|
#define XMCDMA_DELAY_MASK GENMASK(31, 24)
|
|
|
|
#define MRMAC_CTL_DATA_RATE_MASK GENMASK(2, 0)
|
|
#define MRMAC_CTL_DATA_RATE_10G 0
|
|
#define MRMAC_CTL_DATA_RATE_25G 1
|
|
#define MRMAC_CTL_DATA_RATE_40G 2
|
|
#define MRMAC_CTL_DATA_RATE_50G 3
|
|
#define MRMAC_CTL_DATA_RATE_100G 4
|
|
|
|
#define MRMAC_CTL_AXIS_CFG_MASK GENMASK(11, 9)
|
|
#define MRMAC_CTL_AXIS_CFG_SHIFT 9
|
|
#define MRMAC_CTL_AXIS_CFG_10G_IND 1
|
|
#define MRMAC_CTL_AXIS_CFG_25G_IND 1
|
|
|
|
#define MRMAC_CTL_SERDES_WIDTH_MASK GENMASK(6, 4)
|
|
#define MRMAC_CTL_SERDES_WIDTH_SHIFT 4
|
|
#define MRMAC_CTL_SERDES_WIDTH_10G 4
|
|
#define MRMAC_CTL_SERDES_WIDTH_25G 6
|
|
|
|
#define MRMAC_CTL_RATE_CFG_MASK (MRMAC_CTL_DATA_RATE_MASK | \
|
|
MRMAC_CTL_AXIS_CFG_MASK | \
|
|
MRMAC_CTL_SERDES_WIDTH_MASK)
|
|
|
|
#define MRMAC_CTL_PM_TICK_MASK BIT(30)
|
|
#define MRMAC_TICK_TRIGGER BIT(0)
|
|
|
|
#define XMCDMA_BD_STS_ACTUAL_LEN_MASK 0x007fffff /* Actual length */
|
|
|
|
/* MCDMA common offsets */
|
|
struct mcdma_common_regs {
|
|
u32 control; /* Common control */
|
|
u32 status; /* Common status */
|
|
u32 chen; /* Channel enable/disable */
|
|
u32 chser; /* Channel in progress */
|
|
u32 err; /* Error */
|
|
u32 ch_schd_type; /* Channel Q scheduler type */
|
|
u32 wrr_reg1; /* Weight of each channel (ch1-8) */
|
|
u32 wrr_reg2; /* Weight of each channel (ch9-16) */
|
|
u32 ch_serviced; /* Channels completed */
|
|
u32 arcache_aruser; /* ARCACHE and ARUSER values for AXI4 read */
|
|
u32 intr_status; /* Interrupt monitor */
|
|
u32 reserved[5];
|
|
};
|
|
|
|
/* MCDMA per-channel registers */
|
|
struct mcdma_chan_reg {
|
|
u32 control; /* Control */
|
|
u32 status; /* Status */
|
|
u32 current; /* Current descriptor */
|
|
u32 current_hi; /* Current descriptor high 32bit */
|
|
u32 tail; /* Tail descriptor */
|
|
u32 tail_hi; /* Tail descriptor high 32bit */
|
|
u32 pktcnt; /* Packet processed count */
|
|
};
|
|
|
|
/* MCDMA buffer descriptors */
|
|
struct mcdma_bd {
|
|
u32 next_desc; /* Next descriptor pointer */
|
|
u32 next_desc_msb;
|
|
u32 buf_addr; /* Buffer address */
|
|
u32 buf_addr_msb;
|
|
u32 reserved1;
|
|
u32 cntrl; /* Control */
|
|
u32 status; /* Status */
|
|
u32 sband_stats;
|
|
u32 app0;
|
|
u32 app1; /* Tx start << 16 | insert */
|
|
u32 app2; /* Tx csum seed */
|
|
u32 app3;
|
|
u32 app4;
|
|
u32 sw_id_offset;
|
|
u32 reserved2;
|
|
u32 reserved3;
|
|
u32 reserved4[16];
|
|
};
|
|
|
|
#endif /* __XILINX_AXI_MRMAC_H */
|