mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
d9cb860d30
Add MVEBU_TWSI1_BASE define so that the 2nd I2C controller on e.g. AXP can be used. Signed-off-by: Stefan Roese <sr@denx.de>
164 lines
5.2 KiB
C
164 lines
5.2 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* Header file for the Marvell's Feroceon CPU core.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _MVEBU_SOC_H
|
|
#define _MVEBU_SOC_H
|
|
|
|
#define SOC_MV78230_ID 0x7823
|
|
#define SOC_MV78260_ID 0x7826
|
|
#define SOC_MV78460_ID 0x7846
|
|
#define SOC_88F6720_ID 0x6720
|
|
#define SOC_88F6810_ID 0x6810
|
|
#define SOC_88F6820_ID 0x6820
|
|
#define SOC_88F6828_ID 0x6828
|
|
|
|
/* A375 revisions */
|
|
#define MV_88F67XX_A0_ID 0x3
|
|
|
|
/* A38x revisions */
|
|
#define MV_88F68XX_Z1_ID 0x0
|
|
#define MV_88F68XX_A0_ID 0x4
|
|
|
|
/* TCLK Core Clock definition */
|
|
#ifndef CONFIG_SYS_TCLK
|
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
#endif
|
|
|
|
/* Armada XP PLL frequency (used for NAND clock generation) */
|
|
#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
|
|
|
|
/* SOC specific definations */
|
|
#define INTREG_BASE 0xd0000000
|
|
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* The SPL U-Boot version still runs with the default
|
|
* address for the internal registers, configured by
|
|
* the BootROM. Only the main U-Boot version uses the
|
|
* new internal register base address, that also is
|
|
* required for the Linux kernel.
|
|
*/
|
|
#define SOC_REGS_PHY_BASE 0xd0000000
|
|
#else
|
|
#define SOC_REGS_PHY_BASE 0xf1000000
|
|
#endif
|
|
#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x)
|
|
|
|
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
|
|
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
|
|
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
|
|
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
|
|
#define MVEBU_TWSI1_BASE (MVEBU_REGISTER(0x11100))
|
|
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
|
|
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))
|
|
#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140))
|
|
#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180))
|
|
#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200))
|
|
#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700))
|
|
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
|
|
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
|
|
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
|
|
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
|
|
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
|
|
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
|
|
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
|
|
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
|
|
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
|
|
#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000))
|
|
#define MVEBU_LCD_BASE (MVEBU_REGISTER(0xe0000))
|
|
|
|
#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200))
|
|
#define MBUS_ERR_PROP_EN (1 << 8)
|
|
|
|
#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
|
|
#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
|
|
|
|
#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08)
|
|
#define NAND_EN BIT(0)
|
|
#define NAND_ARBITER_EN BIT(27)
|
|
|
|
#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c)
|
|
#define GE0_PUP_EN BIT(0)
|
|
#define GE1_PUP_EN BIT(1)
|
|
#define LCD_PUP_EN BIT(2)
|
|
#define NAND_PUP_EN BIT(4)
|
|
#define SPI_PUP_EN BIT(5)
|
|
|
|
#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8))
|
|
#define NAND_ECC_DIVCKL_RATIO_OFFS 8
|
|
#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
|
|
|
|
#define SDRAM_MAX_CS 4
|
|
#define SDRAM_ADDR_MASK 0xFF000000
|
|
|
|
/* MVEBU CPU memory windows */
|
|
#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA
|
|
#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE
|
|
#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE
|
|
|
|
#define COMPHY_REFCLK_ALIGNMENT (MVEBU_REGISTER(0x182f8))
|
|
|
|
/* BootROM error register (also includes some status infos) */
|
|
#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0))
|
|
#define BOOTROM_ERR_MODE_OFFS 28
|
|
#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS)
|
|
#define BOOTROM_ERR_MODE_UART 0x6
|
|
|
|
#if defined(CONFIG_ARMADA_375)
|
|
/* SAR values for Armada 375 */
|
|
#define CONFIG_SAR_REG (MVEBU_REGISTER(0xe8200))
|
|
#define CONFIG_SAR2_REG (MVEBU_REGISTER(0xe8204))
|
|
|
|
#define SAR_CPU_FREQ_OFFS 17
|
|
#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS)
|
|
|
|
#define BOOT_DEV_SEL_OFFS 3
|
|
#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
|
|
|
|
#define BOOT_FROM_UART 0x30
|
|
#define BOOT_FROM_SPI 0x38
|
|
#elif defined(CONFIG_ARMADA_38X)
|
|
/* SAR values for Armada 38x */
|
|
#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600))
|
|
|
|
#define SAR_CPU_FREQ_OFFS 10
|
|
#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS)
|
|
#define SAR_BOOT_DEVICE_OFFS 4
|
|
#define SAR_BOOT_DEVICE_MASK (0x1f << SAR_BOOT_DEVICE_OFFS)
|
|
|
|
#define BOOT_DEV_SEL_OFFS 4
|
|
#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
|
|
|
|
#define BOOT_FROM_UART 0x28
|
|
#define BOOT_FROM_SPI 0x32
|
|
#define BOOT_FROM_MMC 0x30
|
|
#define BOOT_FROM_MMC_ALT 0x31
|
|
#else
|
|
/* SAR values for Armada XP */
|
|
#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230))
|
|
#define CONFIG_SAR2_REG (MVEBU_REGISTER(0x18234))
|
|
|
|
#define SAR_CPU_FREQ_OFFS 21
|
|
#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS)
|
|
#define SAR_FFC_FREQ_OFFS 24
|
|
#define SAR_FFC_FREQ_MASK (0xf << SAR_FFC_FREQ_OFFS)
|
|
#define SAR2_CPU_FREQ_OFFS 20
|
|
#define SAR2_CPU_FREQ_MASK (0x1 << SAR2_CPU_FREQ_OFFS)
|
|
#define SAR_BOOT_DEVICE_OFFS 5
|
|
#define SAR_BOOT_DEVICE_MASK (0xf << SAR_BOOT_DEVICE_OFFS)
|
|
|
|
#define BOOT_DEV_SEL_OFFS 5
|
|
#define BOOT_DEV_SEL_MASK (0xf << BOOT_DEV_SEL_OFFS)
|
|
|
|
#define BOOT_FROM_UART 0x2
|
|
#define BOOT_FROM_SPI 0x3
|
|
#endif
|
|
|
|
#endif /* _MVEBU_SOC_H */
|