u-boot/board/tqm5200/config.mk
Wolfgang Denk 978b10964c Add support for high-boot on TQM5200 and TQM5200S boards.
Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.

To actually "high boot", set jumper X30 on the STK52xx.

Patch by Martin Krause, 12 Jul 2006
2006-07-19 18:01:38 +02:00

46 lines
1.4 KiB
Makefile

#
# (C) Copyright 2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# TQM5200 board:
#
# Valid values for TEXT_BASE are:
#
# 0xFC000000 boot low (standard configuration with room for max 64 MByte
# Flash ROM)
# 0xFFF00000 boot high (for a backup copy of U-Boot)
# 0x00100000 boot from RAM (for testing only)
#
sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot low
TEXT_BASE = 0xFC000000
## For a backup copy of U-Boot at the end of flash: boot high
# TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
# TEXT_BASE = 0x00100000
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board