mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
ba94a1bba3
- Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
1271 lines
34 KiB
C
1271 lines
34 KiB
C
/**
|
|
* @file IxSspAcc.h
|
|
*
|
|
* @brief Header file for the IXP400 SSP Serial Port Access (IxSspAcc)
|
|
*
|
|
* @version $Revision: 0.1 $
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
/**
|
|
* @defgroup IxSspAcc IXP400 SSP Serial Port Access (IxSspAcc) API
|
|
*
|
|
* @brief IXP400 SSP Serial Port Access Public API
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef IXSSPACC_H
|
|
#define IXSSPACC_H
|
|
|
|
#ifdef __ixp46X
|
|
|
|
#include "IxOsal.h"
|
|
|
|
/*
|
|
* Section for enum
|
|
*/
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccDataSize
|
|
*
|
|
* @brief The data sizes in bits that are supported by the protocol
|
|
*/
|
|
typedef enum
|
|
{
|
|
DATA_SIZE_TOO_SMALL = 0x2,
|
|
DATA_SIZE_4 = 0x3,
|
|
DATA_SIZE_5,
|
|
DATA_SIZE_6,
|
|
DATA_SIZE_7,
|
|
DATA_SIZE_8,
|
|
DATA_SIZE_9,
|
|
DATA_SIZE_10,
|
|
DATA_SIZE_11,
|
|
DATA_SIZE_12,
|
|
DATA_SIZE_13,
|
|
DATA_SIZE_14,
|
|
DATA_SIZE_15,
|
|
DATA_SIZE_16,
|
|
DATA_SIZE_TOO_BIG
|
|
} IxSspAccDataSize;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccPortStatus
|
|
*
|
|
* @brief The status of the SSP port to be set to enable/disable
|
|
*/
|
|
typedef enum
|
|
{
|
|
SSP_PORT_DISABLE = 0x0,
|
|
SSP_PORT_ENABLE,
|
|
INVALID_SSP_PORT_STATUS
|
|
} IxSspAccPortStatus;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccFrameFormat
|
|
*
|
|
* @brief The frame format that is to be used - SPI, SSP, or Microwire
|
|
*/
|
|
typedef enum
|
|
{
|
|
SPI_FORMAT = 0x0,
|
|
SSP_FORMAT,
|
|
MICROWIRE_FORMAT,
|
|
INVALID_FORMAT
|
|
} IxSspAccFrameFormat;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccClkSource
|
|
*
|
|
* @brief The source to produce the SSP serial clock
|
|
*/
|
|
typedef enum
|
|
{
|
|
ON_CHIP_CLK = 0x0,
|
|
EXTERNAL_CLK,
|
|
INVALID_CLK_SOURCE
|
|
} IxSspAccClkSource;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccSpiSclkPhase
|
|
*
|
|
* @brief The SPI SCLK Phase:
|
|
* 0 - SCLK is inactive one cycle at the start of a frame and 1/2 cycle at the
|
|
* end of a frame.
|
|
* 1 - SCLK is inactive 1/2 cycle at the start of a frame and one cycle at the
|
|
* end of a frame.
|
|
*/
|
|
typedef enum
|
|
{
|
|
START_ONE_END_HALF = 0x0,
|
|
START_HALF_END_ONE,
|
|
INVALID_SPI_PHASE
|
|
} IxSspAccSpiSclkPhase;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccSpiSclkPolarity
|
|
*
|
|
* @brief The SPI SCLK Polarity can be set to either low or high.
|
|
*/
|
|
typedef enum
|
|
{
|
|
SPI_POLARITY_LOW = 0x0,
|
|
SPI_POLARITY_HIGH,
|
|
INVALID_SPI_POLARITY
|
|
} IxSspAccSpiSclkPolarity;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccMicrowireCtlWord
|
|
*
|
|
* @brief The Microwire control word can be either 8 or 16 bit.
|
|
*/
|
|
typedef enum
|
|
{
|
|
MICROWIRE_8_BIT = 0x0,
|
|
MICROWIRE_16_BIT,
|
|
INVALID_MICROWIRE_CTL_WORD
|
|
} IxSspAccMicrowireCtlWord;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IxSspAccFifoThreshold
|
|
*
|
|
* @brief The threshold in frames (each frame is defined by IxSspAccDataSize)
|
|
* that can be set for the FIFO to trigger a threshold exceed when
|
|
* checking with the ExceedThresholdCheck functions or an interrupt
|
|
* when it is enabled.
|
|
*/
|
|
typedef enum
|
|
{
|
|
FIFO_TSHLD_1 = 0x0,
|
|
FIFO_TSHLD_2,
|
|
FIFO_TSHLD_3,
|
|
FIFO_TSHLD_4,
|
|
FIFO_TSHLD_5,
|
|
FIFO_TSHLD_6,
|
|
FIFO_TSHLD_7,
|
|
FIFO_TSHLD_8,
|
|
FIFO_TSHLD_9,
|
|
FIFO_TSHLD_10,
|
|
FIFO_TSHLD_11,
|
|
FIFO_TSHLD_12,
|
|
FIFO_TSHLD_13,
|
|
FIFO_TSHLD_14,
|
|
FIFO_TSHLD_15,
|
|
FIFO_TSHLD_16,
|
|
INVALID_FIFO_TSHLD
|
|
} IxSspAccFifoThreshold;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @enum IX_SSP_STATUS
|
|
*
|
|
* @brief The statuses that can be returned in a SSP Serial Port Access
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_SSP_SUCCESS = IX_SUCCESS, /**< Success status */
|
|
IX_SSP_FAIL, /**< Fail status */
|
|
IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING, /**<
|
|
Rx FIFO Overrun handler is NULL. */
|
|
IX_SSP_RX_FIFO_HANDLER_MISSING, /**<
|
|
Rx FIFO threshold hit or above handler is NULL
|
|
*/
|
|
IX_SSP_TX_FIFO_HANDLER_MISSING, /**<
|
|
Tx FIFO threshold hit or below handler is NULL
|
|
*/
|
|
IX_SSP_FIFO_NOT_EMPTY_FOR_SETTING_CTL_CMD, /**<
|
|
Tx FIFO not empty and therefore microwire
|
|
control command size setting is not allowed. */
|
|
IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE, /**<
|
|
frame format selected is invalid. */
|
|
IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE, /**<
|
|
data size selected is invalid. */
|
|
IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE, /**<
|
|
source clock selected is invalid. */
|
|
IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE, /**<
|
|
Tx FIFO threshold selected is invalid. */
|
|
IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE, /**<
|
|
Rx FIFO threshold selected is invalid. */
|
|
IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE, /**<
|
|
SPI phase selected is invalid. */
|
|
IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE, /**<
|
|
SPI polarity selected is invalid. */
|
|
IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE, /**<
|
|
Microwire control command selected is invalid
|
|
*/
|
|
IX_SSP_INT_UNBIND_FAIL, /**< Interrupt unbind fail to unbind SSP
|
|
interrupt */
|
|
IX_SSP_INT_BIND_FAIL, /**< Interrupt bind fail during init */
|
|
IX_SSP_RX_FIFO_NOT_EMPTY, /**<
|
|
Rx FIFO not empty while trying to change data
|
|
size. */
|
|
IX_SSP_TX_FIFO_NOT_EMPTY, /**<
|
|
Rx FIFO not empty while trying to change data
|
|
size or microwire control command size. */
|
|
IX_SSP_POLL_MODE_BLOCKING, /**<
|
|
poll mode selected blocks interrupt mode from
|
|
being selected. */
|
|
IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD, /**<
|
|
Tx FIFO level hit or below threshold. */
|
|
IX_SSP_TX_FIFO_EXCEED_THRESHOLD, /**<
|
|
Tx FIFO level exceeded threshold. */
|
|
IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD, /**<
|
|
Rx FIFO level hit or exceeded threshold. */
|
|
IX_SSP_RX_FIFO_BELOW_THRESHOLD, /**<
|
|
Rx FIFO level below threshold. */
|
|
IX_SSP_BUSY, /**< SSP is busy. */
|
|
IX_SSP_IDLE, /**< SSP is idle. */
|
|
IX_SSP_OVERRUN_OCCURRED, /**<
|
|
SSP has experienced an overrun. */
|
|
IX_SSP_NO_OVERRUN, /**<
|
|
SSP did not experience an overrun. */
|
|
IX_SSP_NOT_SUPORTED, /**< hardware does not support SSP */
|
|
IX_SSP_NOT_INIT, /**< SSP Access not intialized */
|
|
IX_SSP_NULL_POINTER /**< parameter passed in is NULL */
|
|
} IX_SSP_STATUS;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @brief SSP Rx FIFO Overrun handler
|
|
*
|
|
* This function is called for the client to handle Rx FIFO Overrun that occurs
|
|
* in the SSP hardware
|
|
*/
|
|
typedef void (*RxFIFOOverrunHandler)(void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @brief SSP Rx FIFO Threshold hit or above handler
|
|
*
|
|
* This function is called for the client to handle Rx FIFO threshold hit or
|
|
* or above that occurs in the SSP hardware
|
|
*/
|
|
typedef void (*RxFIFOThresholdHandler)(void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @brief SSP Tx FIFO Threshold hit or below handler
|
|
*
|
|
* This function is called for the client to handle Tx FIFO threshold hit or
|
|
* or below that occurs in the SSP hardware
|
|
*/
|
|
typedef void (*TxFIFOThresholdHandler)(void);
|
|
|
|
|
|
/*
|
|
* Section for struct
|
|
*/
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @brief contains all the variables required to initialize the SSP serial port
|
|
* hardware.
|
|
*
|
|
* Structure to be filled and used for calling initialization
|
|
*/
|
|
typedef struct
|
|
{
|
|
IxSspAccFrameFormat FrameFormatSelected;/**<Select between SPI, SSP and
|
|
Microwire. */
|
|
IxSspAccDataSize DataSizeSelected; /**<Select between 4 and 16. */
|
|
IxSspAccClkSource ClkSourceSelected; /**<Select clock source to be
|
|
on-chip or external. */
|
|
IxSspAccFifoThreshold TxFIFOThresholdSelected;
|
|
/**<Select Tx FIFO threshold
|
|
between 1 to 16. */
|
|
IxSspAccFifoThreshold RxFIFOThresholdSelected;
|
|
/**<Select Rx FIFO threshold
|
|
between 1 to 16. */
|
|
BOOL RxFIFOIntrEnable; /**<Enable/disable Rx FIFO
|
|
threshold interrupt. Disabling
|
|
this interrupt will require
|
|
the use of the polling function
|
|
RxFIFOExceedThresholdCheck. */
|
|
BOOL TxFIFOIntrEnable; /**<Enable/disable Tx FIFO
|
|
threshold interrupt. Disabling
|
|
this interrupt will require
|
|
the use of the polling function
|
|
TxFIFOExceedThresholdCheck. */
|
|
RxFIFOThresholdHandler RxFIFOThsldHdlr; /**<Pointer to function to handle
|
|
a Rx FIFO interrupt. */
|
|
TxFIFOThresholdHandler TxFIFOThsldHdlr; /**<Pointer to function to handle
|
|
a Tx FIFO interrupt. */
|
|
RxFIFOOverrunHandler RxFIFOOverrunHdlr; /**<Pointer to function to handle
|
|
a Rx FIFO overrun interrupt. */
|
|
BOOL LoopbackEnable; /**<Select operation mode to be
|
|
normal or loopback mode. */
|
|
IxSspAccSpiSclkPhase SpiSclkPhaseSelected;
|
|
/**<Select SPI SCLK phase to start
|
|
with one inactive cycle and end
|
|
with 1/2 inactive cycle or
|
|
start with 1/2 inactive cycle
|
|
and end with one inactive
|
|
cycle. (Only used in
|
|
SPI format). */
|
|
IxSspAccSpiSclkPolarity SpiSclkPolaritySelected;
|
|
/**<Select SPI SCLK idle state
|
|
to be low or high. (Only used in
|
|
SPI format). */
|
|
IxSspAccMicrowireCtlWord MicrowireCtlWordSelected;
|
|
/**<Select Microwire control
|
|
format to be 8 or 16-bit. (Only
|
|
used in Microwire format). */
|
|
UINT8 SerialClkRateSelected; /**<Select between 0 (1.8432Mbps)
|
|
and 255 (7.2Kbps). The
|
|
formula used is Bit rate =
|
|
3.6864x10^6 /
|
|
(2 x (SerialClkRateSelect + 1))
|
|
*/
|
|
} IxSspInitVars;
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @brief contains counters of the SSP statistics
|
|
*
|
|
* Structure contains all values of counters and associated overflows.
|
|
*/
|
|
typedef struct
|
|
{
|
|
UINT32 ixSspRcvCounter; /**<Total frames received. */
|
|
UINT32 ixSspXmitCounter; /**<Total frames transmitted. */
|
|
UINT32 ixSspOverflowCounter;/**<Total occurrences of overflow. */
|
|
} IxSspAccStatsCounters;
|
|
|
|
|
|
/*
|
|
* Section for prototypes interface functions
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccInit (
|
|
IxSspInitVars *initVarsSelected);
|
|
*
|
|
* @brief Initializes the SSP Access module.
|
|
*
|
|
* @param "IxSspAccInitVars [in] *initVarsSelected" - struct containing required
|
|
* variables for initialization
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will initialize the SSP Serial Port hardware to the user specified
|
|
* configuration. Then it will enable the SSP Serial Port.
|
|
* *NOTE*: Once interrupt or polling mode is selected, the mode cannot be
|
|
* changed via the interrupt enable/disable function but the init needs to be
|
|
* called again to change it.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Successfully initialize and enable the SSP
|
|
* serial port.
|
|
* - IX_SSP_RX_FIFO_HANDLER_MISSING - interrupt mode is selected but RX FIFO
|
|
* handler pointer is NULL
|
|
* - IX_SSP_TX_FIFO_HANDLER_MISSING - interrupt mode is selected but TX FIFO
|
|
* handler pointer is NULL
|
|
* - IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING - interrupt mode is selected but
|
|
* RX FIFO Overrun handler pointer is NULL
|
|
* - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
|
|
* allowed.
|
|
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
|
|
* allowed.
|
|
* - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - frame format selected is invalid
|
|
* - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - data size selected is invalid
|
|
* - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - clock source selected is invalid
|
|
* - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - Tx FIFO threshold level
|
|
* selected is invalid
|
|
* - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - Rx FIFO threshold level
|
|
* selected is invalid
|
|
* - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - SPI phase selected is invalid
|
|
* - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - SPI polarity selected is invalid
|
|
* - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - microwire control command
|
|
* size is invalid
|
|
* - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
|
|
* - IX_SSP_INT_BIND_FAIL - interrupt handler failed to bind to SSP interrupt
|
|
* hardware trigger
|
|
* - IX_SSP_NOT_SUPORTED - hardware does not support SSP
|
|
* - IX_SSP_NULL_POINTER - parameter passed in is NULL
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccInit (IxSspInitVars *initVarsSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccUninit (
|
|
void)
|
|
*
|
|
* @brief Un-initializes the SSP Serial Port Access component
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will disable the SSP Serial Port hardware. The client can call the
|
|
* init function again if they wish to enable the SSP.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - successfully uninit SSP component
|
|
* - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccUninit (void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccFIFODataSubmit (
|
|
UINT16 *data,
|
|
UINT32 amtOfData)
|
|
*
|
|
* @brief Inserts data into the SSP Serial Port's FIFO
|
|
*
|
|
* @param "UINT16 [in] *data" - pointer to the location to transmit the data
|
|
* from
|
|
* "UINT32 [in] amtOfData" - number of data to be transmitted.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will insert the amount of data specified by "amtOfData" from buffer
|
|
* pointed to by "data" into the FIFO to be transmitted by the hardware.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Data inserted successfully into FIFO
|
|
* - IX_SSP_FAIL - FIFO insufficient space
|
|
* - IX_SSP_NULL_POINTER - data pointer passed by client is NULL
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccFIFODataSubmit (
|
|
UINT16* data,
|
|
UINT32 amtOfData);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccFIFODataReceive (
|
|
UINT16 *data,
|
|
UINT32 amtOfData)
|
|
*
|
|
* @brief Extract data from the SSP Serial Port's FIFO
|
|
*
|
|
* @param "UINT16 [in] *data" - pointer to the location to receive the data into
|
|
* "UINT32 [in] amtOfData" - number of data to be received.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will extract the amount of data specified by "amtOfData" from the
|
|
* FIFO already received by the hardware into the buffer pointed to by "data".
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Data extracted successfully from FIFO
|
|
* - IX_SSP_FAIL - FIFO has no data
|
|
* - IX_SSP_NULL_POINTER - data pointer passed by client is NULL
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccFIFODataReceive (
|
|
UINT16* data,
|
|
UINT32 amtOfData);
|
|
|
|
|
|
/**
|
|
* Polling Functions
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccTxFIFOHitOrBelowThresholdCheck (
|
|
void)
|
|
*
|
|
* @brief Check if the Tx FIFO threshold has been hit or fallen below.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return whether the Tx FIFO threshold has been exceeded or not
|
|
*
|
|
* @return
|
|
* - IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD - Tx FIFO level hit or below threshold .
|
|
* - IX_SSP_TX_FIFO_EXCEED_THRESHOLD - Tx FIFO level exceeded threshold.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccTxFIFOHitOrBelowThresholdCheck (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOHitOrAboveThresholdCheck (
|
|
void)
|
|
*
|
|
* @brief Check if the Rx FIFO threshold has been hit or exceeded.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return whether the Rx FIFO level is below threshold or not
|
|
*
|
|
* @return
|
|
* - IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD - Rx FIFO level hit or exceeded threshold
|
|
* - IX_SSP_RX_FIFO_BELOW_THRESHOLD - Rx FIFO level below threshold
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccRxFIFOHitOrAboveThresholdCheck (
|
|
void);
|
|
|
|
|
|
/**
|
|
* Configuration functions
|
|
*
|
|
* NOTE: These configurations are not required to be called once init is called
|
|
* unless configurations need to be changed on the fly.
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccSSPPortStatusSet (
|
|
IxSspAccPortStatus portStatusSelected)
|
|
*
|
|
* @brief Enables/disables the SSP Serial Port hardware.
|
|
*
|
|
* @param "IxSspAccPortStatus [in] portStatusSelected" - Set the SSP port to
|
|
* enable or disable
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will enable/disable the SSP Serial Port hardware.
|
|
* NOTE: This function is called by init to enable the SSP after setting up the
|
|
* configurations and by uninit to disable the SSP.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Port status set with valid enum value
|
|
* - IX_SSP_FAIL - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccSSPPortStatusSet (
|
|
IxSspAccPortStatus portStatusSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccFrameFormatSelect (
|
|
IxSspAccFrameFormat frameFormatSelected)
|
|
*
|
|
* @brief Sets the frame format for the SSP Serial Port hardware
|
|
*
|
|
* @param "IxSspAccFrameFormat [in] frameFormatSelected" - The frame format of
|
|
* SPI, SSP or Microwire can be selected as the format
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the format for the transfers via user input.
|
|
* *NOTE*: The SSP hardware will be disabled to clear the FIFOs. Then its
|
|
* previous state (enabled/disabled) restored after changing the format.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - frame format set with valid enum value
|
|
* - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - invalid frame format value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccFrameFormatSelect (
|
|
IxSspAccFrameFormat frameFormatSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccDataSizeSelect (
|
|
IxSspAccDataSize dataSizeSelected)
|
|
*
|
|
* @brief Sets the data size for transfers
|
|
*
|
|
* @param "IxSspAccDataSize [in] dataSizeSelected" - The data size between 4
|
|
* and 16 that can be selected for data transfers
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the data size for the transfers via user input. It will
|
|
* disallow the change of the data size if either of the Rx/Tx FIFO is not
|
|
* empty to prevent data loss.
|
|
* *NOTE*: The SSP port will be disabled if the FIFOs are found to be empty and
|
|
* if between the check and disabling of the SSP (which clears the
|
|
* FIFOs) data is received into the FIFO, it might be lost.
|
|
* *NOTE*: The FIFOs can be cleared by disabling the SSP Port if necessary to
|
|
* force the data size change.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - data size set with valid enum value
|
|
* - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
|
|
* allowed.
|
|
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
|
|
* allowed.
|
|
* - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccDataSizeSelect (
|
|
IxSspAccDataSize dataSizeSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccClockSourceSelect(
|
|
IxSspAccClkSource clkSourceSelected)
|
|
*
|
|
* @brief Sets the clock source of the SSP Serial Port hardware
|
|
*
|
|
* @param "IxSspAccClkSource [in] clkSourceSelected" - The clock source from
|
|
* either external source on on-chip can be selected as the source
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the clock source for the transfers via user input.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - clock source set with valid enum value
|
|
* - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccClockSourceSelect (
|
|
IxSspAccClkSource clkSourceSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccSerialClockRateConfigure (
|
|
UINT8 serialClockRateSelected)
|
|
*
|
|
* @brief Sets the on-chip Serial Clock Rate of the SSP Serial Port hardware.
|
|
*
|
|
* @param "UINT8 [in] serialClockRateSelected" - The serial clock rate that can
|
|
* be set is between 7.2Kbps and 1.8432Mbps. The formula used is
|
|
* Bit rate = 3.6864x10^6 / (2 x (SerialClockRateSelected + 1))
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the serial clock rate for the transfers via user input.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Serial clock rate configured successfully
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccSerialClockRateConfigure (
|
|
UINT8 serialClockRateSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOIntEnable (
|
|
RxFIFOThresholdHandler rxFIFOIntrHandler)
|
|
*
|
|
* @brief Enables service request interrupt whenever the Rx FIFO hits its
|
|
* threshold
|
|
*
|
|
* @param "void [in] *rxFIFOIntrHandler(UINT32)" - function pointer to the
|
|
* interrupt handler for the Rx FIFO exceeded.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will enable the service request interrupt for the Rx FIFO
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Rx FIFO level interrupt enabled successfully
|
|
* - IX_SSP_RX_FIFO_HANDLER_MISSING - missing handler for Rx FIFO level interrupt
|
|
* - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
|
|
* allowed to be enabled. Use init to enable interrupt mode.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccRxFIFOIntEnable (
|
|
RxFIFOThresholdHandler rxFIFOIntrHandler);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOIntDisable (
|
|
void)
|
|
*
|
|
* @brief Disables service request interrupt of the Rx FIFO.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will disable the service request interrupt of the Rx FIFO.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Rx FIFO Interrupt disabled successfully
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccRxFIFOIntDisable (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccTxFIFOIntEnable (
|
|
TxFIFOThresholdHandler txFIFOIntrHandler)
|
|
*
|
|
* @brief Enables service request interrupt of the Tx FIFO.
|
|
*
|
|
* @param "void [in] *txFIFOIntrHandler(UINT32)" - function pointer to the
|
|
* interrupt handler for the Tx FIFO exceeded.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will enable the service request interrupt of the Tx FIFO.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Tx FIFO level interrupt enabled successfully
|
|
* - IX_SSP_TX_FIFO_HANDLER_MISSING - missing handler for Tx FIFO level interrupt
|
|
* - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
|
|
* allowed to be enabled. Use init to enable interrupt mode.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccTxFIFOIntEnable (
|
|
TxFIFOThresholdHandler txFIFOIntrHandler);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccTxFIFOIntDisable (
|
|
void)
|
|
*
|
|
* @brief Disables service request interrupt of the Tx FIFO
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will disable the service request interrupt of the Tx FIFO
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Tx FIFO Interrupt disabled successfuly.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccTxFIFOIntDisable (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccLoopbackEnable (
|
|
BOOL loopbackEnable)
|
|
*
|
|
* @brief Enables/disables the loopback mode
|
|
*
|
|
* @param "BOOL [in] loopbackEnable" - True to enable and false to disable.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the mode of operation to either loopback or normal mode
|
|
* according to the user input.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Loopback enabled successfully
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccLoopbackEnable (
|
|
BOOL loopbackEnable);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccSpiSclkPolaritySet (
|
|
IxSspAccSpiSclkPolarity spiSclkPolaritySelected)
|
|
*
|
|
* @brief Sets the SPI SCLK Polarity to Low or High
|
|
*
|
|
* @param - "IxSspAccSpiSclkPolarity [in] spiSclkPolaritySelected" - SPI SCLK
|
|
* polarity that can be selected to either high or low
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is only used for the SPI frame format and will set the SPI SCLK polarity
|
|
* to either low or high
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - SPI Sclk polarity set with valid enum value
|
|
* - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - invalid SPI polarity value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccSpiSclkPolaritySet (
|
|
IxSspAccSpiSclkPolarity spiSclkPolaritySelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccSpiSclkPhaseSet (
|
|
IxSspAccSpiSclkPhase spiSclkPhaseSelected)
|
|
*
|
|
* @brief Sets the SPI SCLK Phase
|
|
*
|
|
* @param "IxSspAccSpiSclkPhase [in] spiSclkPhaseSelected" - Phase of either
|
|
* the SCLK is inactive one cycle at the start of a frame and 1/2
|
|
* cycle at the end of a frame, OR
|
|
* the SCLK is inactive 1/2 cycle at the start of a frame and one
|
|
* cycle at the end of a frame.
|
|
*
|
|
* Global Data :
|
|
* - IX_SSP_SUCCESS - SPI Sclk phase set with valid enum value
|
|
* - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - invalid SPI phase value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* This API is only used for the SPI frame format and will set the SPI SCLK
|
|
* phase according to user input.
|
|
*
|
|
* @return
|
|
* - None
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccSpiSclkPhaseSet (
|
|
IxSspAccSpiSclkPhase spiSclkPhaseSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccMicrowireControlWordSet (
|
|
IxSspAccMicrowireCtlWord microwireCtlWordSelected)
|
|
*
|
|
* @brief Sets the Microwire control word to 8 or 16 bit format
|
|
*
|
|
* @param "IxSspAccMicrowireCtlWord [in] microwireCtlWordSelected" - Microwire
|
|
* control word format can be either 8 or 16 bit format
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is only used for the Microwire frame format and will set the
|
|
* control word to 8 or 16 bit format
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Microwire Control Word set with valid enum value
|
|
* - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
|
|
* allowed.
|
|
* - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccMicrowireControlWordSet (
|
|
IxSspAccMicrowireCtlWord microwireCtlWordSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccTxFIFOThresholdSet (
|
|
IxSspAccFifoThreshold txFIFOThresholdSelected)
|
|
*
|
|
* @brief Sets the Tx FIFO Threshold.
|
|
*
|
|
* @param "IxSspAccFifoThreshold [in] txFIFOThresholdSelected" - Threshold that
|
|
* is set for a Tx FIFO service request to be triggered
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the threshold for a Tx FIFO threshold to be triggered
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Tx FIFO Threshold set with valid enum value
|
|
* - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccTxFIFOThresholdSet (
|
|
IxSspAccFifoThreshold txFIFOThresholdSelected);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOThresholdSet (
|
|
IxSspAccFifoThreshold rxFIFOThresholdSelected)
|
|
*
|
|
* @brief Sets the Rx FIFO Threshold.
|
|
*
|
|
* @param "IxSspAccFifoThreshold [in] rxFIFOThresholdSelected" - Threshold that
|
|
* is set for a Tx FIFO service request to be triggered
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will will set the threshold for a Rx FIFO threshold to be triggered
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Rx FIFO Threshold set with valid enum value
|
|
* - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccRxFIFOThresholdSet (
|
|
IxSspAccFifoThreshold rxFIFOThresholdSelected);
|
|
|
|
|
|
/**
|
|
* Debug functions
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccStatsGet (
|
|
IxSspAccStatsCounters *sspStats)
|
|
*
|
|
* @brief Returns the SSP Statistics through the pointer passed in
|
|
*
|
|
* @param "IxSspAccStatsCounters [in] *sspStats" - SSP statistics counter will
|
|
* be read and written to the location pointed by this pointer.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return the statistics counters of the SSP transfers.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - Stats obtained into the pointer provided successfully
|
|
* - IX_SSP_FAIL - client provided pointer is NULL
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccStatsGet (
|
|
IxSspAccStatsCounters *sspStats);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccStatsReset (
|
|
void)
|
|
*
|
|
* @brief Resets the SSP Statistics
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will reset the SSP statistics counters.
|
|
*
|
|
* @return
|
|
* - None
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC void
|
|
ixSspAccStatsReset (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccShow (
|
|
void)
|
|
*
|
|
* @brief Display SSP status registers and statistics counters.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will display the status registers of the SSP and the statistics
|
|
* counters.
|
|
*
|
|
* @return
|
|
* - IX_SSP_SUCCESS - SSP show called successfully.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccShow (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccSSPBusyCheck (
|
|
void)
|
|
*
|
|
* @brief Determine the state of the SSP serial port hardware.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return the state of the SSP serial port hardware - busy or
|
|
* idle
|
|
*
|
|
* @return
|
|
* - IX_SSP_BUSY - SSP is busy
|
|
* - IX_SSP_IDLE - SSP is idle.
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccSSPBusyCheck (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccTxFIFOLevelGet (
|
|
void)
|
|
*
|
|
* @brief Obtain the Tx FIFO's level
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return the level of the Tx FIFO
|
|
*
|
|
* @return
|
|
* - 0..16; 0 can also mean SSP not initialized and will need to be init.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC UINT8
|
|
ixSspAccTxFIFOLevelGet (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOLevelGet (
|
|
void)
|
|
*
|
|
* @brief Obtain the Rx FIFO's level
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return the level of the Rx FIFO
|
|
*
|
|
* @return
|
|
* - 0..16; 0 can also mean SSP not initialized and will need to be init.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC UINT8
|
|
ixSspAccRxFIFOLevelGet (
|
|
void);
|
|
|
|
/**
|
|
* @ingroup IxSspAcc
|
|
*
|
|
* @fn ixSspAccRxFIFOOverrunCheck (
|
|
void)
|
|
*
|
|
* @brief Check if the Rx FIFO has overrun its FIFOs
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return whether the Rx FIFO has overrun its 16 FIFOs
|
|
*
|
|
* @return
|
|
* - IX_SSP_OVERRUN_OCCURRED - Rx FIFO overrun occurred
|
|
* - IX_SSP_NO_OVERRUN - Rx FIFO did not overrun
|
|
* - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_SSP_STATUS
|
|
ixSspAccRxFIFOOverrunCheck (
|
|
void);
|
|
|
|
#endif /* __ixp46X */
|
|
#endif /* IXSSPACC_H */
|