u-boot/doc/README.OXC
wdenk 8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00

24 lines
813 B
Text

This document contains different information about the port
of U-Boot for the OXC board designed by Lucent Technologies,
Inc.
1. Showing activity
U-Boot for the OXC board can show its current status using
the Active LED. This feature is configured by the following
options:
CONFIG_SHOW_ACTIVITY
When this option is on, the Active LED is blinking fast
when U-Boot runs in the idle loop (i.e. waits for user
commands from serial console) and blinking slow when it
downloads an image over network. When U-Boot loads an image
over serial line the Active LED does not blink and its state
is random (i.e. either constant on or constant off).
CONFIG_SHOW_BOOT_PROGRESS
When this option is on, U-Boot switches the Active LED
off before booting an image and switches it on if booting
failed due to some reasons.