mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
133 lines
3 KiB
C
133 lines
3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#define CONFIG_SPI_ADDR 0x00000000
|
|
#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000)
|
|
#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE)
|
|
|
|
#define SPIWDMADR 0xFE001018
|
|
#define SPIWDMCNTR 0xFE001020
|
|
#define SPIDMCOR 0xFE001028
|
|
#define SPIDMINTSR 0xFE001188
|
|
#define SPIDMINTMR 0xFE001190
|
|
|
|
#define SPIDMINTSR_DMEND 0x00000004
|
|
|
|
#define TBR 0xFE002000
|
|
#define RBR 0xFE002000
|
|
|
|
#define CR1 0xFE002008
|
|
#define CR2 0xFE002010
|
|
#define CR3 0xFE002018
|
|
#define CR4 0xFE002020
|
|
#define CR7 0xFE002038
|
|
#define CR8 0xFE002040
|
|
|
|
/* CR1 */
|
|
#define SPI_TBE 0x80
|
|
#define SPI_TBF 0x40
|
|
#define SPI_RBE 0x20
|
|
#define SPI_RBF 0x10
|
|
#define SPI_PFONRD 0x08
|
|
#define SPI_SSDB 0x04
|
|
#define SPI_SSD 0x02
|
|
#define SPI_SSA 0x01
|
|
|
|
/* CR2 */
|
|
#define SPI_RSTF 0x80
|
|
#define SPI_LOOPBK 0x40
|
|
#define SPI_CPOL 0x20
|
|
#define SPI_CPHA 0x10
|
|
#define SPI_L1M0 0x08
|
|
|
|
/* CR4 */
|
|
#define SPI_TBEI 0x80
|
|
#define SPI_TBFI 0x40
|
|
#define SPI_RBEI 0x20
|
|
#define SPI_RBFI 0x10
|
|
#define SPI_SpiS0 0x02
|
|
#define SPI_SSS 0x01
|
|
|
|
/* CR7 */
|
|
#define CR7_IDX_OR12 0x12
|
|
#define OR12_ADDR32 0x00000001
|
|
|
|
#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
|
|
#define spi_read(addr) (*(volatile unsigned long *)(addr))
|
|
|
|
/* M25P80 */
|
|
#define M25_READ 0x03
|
|
#define M25_READ_4BYTE 0x13
|
|
|
|
extern void bss_start(void);
|
|
|
|
#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
|
|
static void __uses_spiboot2 spi_reset(void)
|
|
{
|
|
int timeout = 0x00100000;
|
|
|
|
/* Make sure the last transaction is finalized */
|
|
spi_write(0x00, CR3);
|
|
spi_write(0x02, CR1);
|
|
while (!(spi_read(CR4) & SPI_SpiS0)) {
|
|
if (timeout-- < 0)
|
|
break;
|
|
}
|
|
spi_write(0x00, CR1);
|
|
|
|
spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
|
|
spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
|
|
|
|
spi_write(0, SPIDMCOR);
|
|
}
|
|
|
|
static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
|
|
unsigned long len)
|
|
{
|
|
spi_write(CR7_IDX_OR12, CR7);
|
|
if (spi_read(CR8) & OR12_ADDR32) {
|
|
/* 4-bytes address mode */
|
|
spi_write(M25_READ_4BYTE, TBR);
|
|
spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */
|
|
} else {
|
|
/* 3-bytes address mode */
|
|
spi_write(M25_READ, TBR);
|
|
}
|
|
spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */
|
|
spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */
|
|
spi_write(addr & 0xFF, TBR); /* ADDR7-0 */
|
|
|
|
spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
|
|
spi_write((unsigned long)buf, SPIWDMADR);
|
|
spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
|
|
spi_write(1, SPIDMCOR);
|
|
|
|
spi_write(0xff, CR3);
|
|
spi_write(spi_read(CR1) | SPI_SSDB, CR1);
|
|
spi_write(spi_read(CR1) | SPI_SSA, CR1);
|
|
|
|
while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
|
|
;
|
|
|
|
/* Nagate SP0-SS0 */
|
|
spi_write(0, CR1);
|
|
}
|
|
|
|
void __uses_spiboot2 spiboot_main(void)
|
|
{
|
|
/*
|
|
* This code rounds len up for SPIWDMCNTR. We should set it to 0 in
|
|
* lower 5-bits.
|
|
*/
|
|
void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
|
|
volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0;
|
|
|
|
spi_reset();
|
|
spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len);
|
|
|
|
_start();
|
|
}
|