mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
9ecb0c416c
Same flash driver can be used by other stm32 families like stm32f7. Better place for this driver would be mtd driver location. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
283 lines
7.1 KiB
C
283 lines
7.1 KiB
C
/*
|
|
* (C) Copyright 2015
|
|
* Kamil Lulko, <kamil.lulko@gmail.com>
|
|
*
|
|
* (C) Copyright 2014
|
|
* STMicroelectronics
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <asm/arch/stm32_periph.h>
|
|
|
|
#define RCC_CR_HSION (1 << 0)
|
|
#define RCC_CR_HSEON (1 << 16)
|
|
#define RCC_CR_HSERDY (1 << 17)
|
|
#define RCC_CR_HSEBYP (1 << 18)
|
|
#define RCC_CR_CSSON (1 << 19)
|
|
#define RCC_CR_PLLON (1 << 24)
|
|
#define RCC_CR_PLLRDY (1 << 25)
|
|
|
|
#define RCC_PLLCFGR_PLLM_MASK 0x3F
|
|
#define RCC_PLLCFGR_PLLN_MASK 0x7FC0
|
|
#define RCC_PLLCFGR_PLLP_MASK 0x30000
|
|
#define RCC_PLLCFGR_PLLQ_MASK 0xF000000
|
|
#define RCC_PLLCFGR_PLLSRC (1 << 22)
|
|
#define RCC_PLLCFGR_PLLN_SHIFT 6
|
|
#define RCC_PLLCFGR_PLLP_SHIFT 16
|
|
#define RCC_PLLCFGR_PLLQ_SHIFT 24
|
|
|
|
#define RCC_CFGR_AHB_PSC_MASK 0xF0
|
|
#define RCC_CFGR_APB1_PSC_MASK 0x1C00
|
|
#define RCC_CFGR_APB2_PSC_MASK 0xE000
|
|
#define RCC_CFGR_SW0 (1 << 0)
|
|
#define RCC_CFGR_SW1 (1 << 1)
|
|
#define RCC_CFGR_SW_MASK 0x3
|
|
#define RCC_CFGR_SW_HSI 0
|
|
#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
|
|
#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
|
|
#define RCC_CFGR_SWS0 (1 << 2)
|
|
#define RCC_CFGR_SWS1 (1 << 3)
|
|
#define RCC_CFGR_SWS_MASK 0xC
|
|
#define RCC_CFGR_SWS_HSI 0
|
|
#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
|
|
#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
|
|
#define RCC_CFGR_HPRE_SHIFT 4
|
|
#define RCC_CFGR_PPRE1_SHIFT 10
|
|
#define RCC_CFGR_PPRE2_SHIFT 13
|
|
|
|
#define RCC_APB1ENR_PWREN (1 << 28)
|
|
|
|
/*
|
|
* RCC USART specific definitions
|
|
*/
|
|
#define RCC_ENR_USART1EN (1 << 4)
|
|
#define RCC_ENR_USART2EN (1 << 17)
|
|
#define RCC_ENR_USART3EN (1 << 18)
|
|
#define RCC_ENR_USART6EN (1 << 5)
|
|
|
|
#define PWR_CR_VOS0 (1 << 14)
|
|
#define PWR_CR_VOS1 (1 << 15)
|
|
#define PWR_CR_VOS_MASK 0xC000
|
|
#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1)
|
|
#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1)
|
|
#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0)
|
|
|
|
/*
|
|
* RCC GPIO specific definitions
|
|
*/
|
|
#define RCC_ENR_GPIO_A_EN (1 << 0)
|
|
#define RCC_ENR_GPIO_B_EN (1 << 1)
|
|
#define RCC_ENR_GPIO_C_EN (1 << 2)
|
|
#define RCC_ENR_GPIO_D_EN (1 << 3)
|
|
#define RCC_ENR_GPIO_E_EN (1 << 4)
|
|
#define RCC_ENR_GPIO_F_EN (1 << 5)
|
|
#define RCC_ENR_GPIO_G_EN (1 << 6)
|
|
#define RCC_ENR_GPIO_H_EN (1 << 7)
|
|
#define RCC_ENR_GPIO_I_EN (1 << 8)
|
|
#define RCC_ENR_GPIO_J_EN (1 << 9)
|
|
#define RCC_ENR_GPIO_K_EN (1 << 10)
|
|
|
|
struct pll_psc {
|
|
u8 pll_m;
|
|
u16 pll_n;
|
|
u8 pll_p;
|
|
u8 pll_q;
|
|
u8 ahb_psc;
|
|
u8 apb1_psc;
|
|
u8 apb2_psc;
|
|
};
|
|
|
|
#define AHB_PSC_1 0
|
|
#define AHB_PSC_2 0x8
|
|
#define AHB_PSC_4 0x9
|
|
#define AHB_PSC_8 0xA
|
|
#define AHB_PSC_16 0xB
|
|
#define AHB_PSC_64 0xC
|
|
#define AHB_PSC_128 0xD
|
|
#define AHB_PSC_256 0xE
|
|
#define AHB_PSC_512 0xF
|
|
|
|
#define APB_PSC_1 0
|
|
#define APB_PSC_2 0x4
|
|
#define APB_PSC_4 0x5
|
|
#define APB_PSC_8 0x6
|
|
#define APB_PSC_16 0x7
|
|
|
|
#if !defined(CONFIG_STM32_HSE_HZ)
|
|
#error "CONFIG_STM32_HSE_HZ not defined!"
|
|
#else
|
|
#if (CONFIG_STM32_HSE_HZ == 8000000)
|
|
#if (CONFIG_SYS_CLK_FREQ == 180000000)
|
|
/* 180 MHz */
|
|
struct pll_psc sys_pll_psc = {
|
|
.pll_m = 8,
|
|
.pll_n = 360,
|
|
.pll_p = 2,
|
|
.pll_q = 8,
|
|
.ahb_psc = AHB_PSC_1,
|
|
.apb1_psc = APB_PSC_4,
|
|
.apb2_psc = APB_PSC_2
|
|
};
|
|
#else
|
|
/* default 168 MHz */
|
|
struct pll_psc sys_pll_psc = {
|
|
.pll_m = 8,
|
|
.pll_n = 336,
|
|
.pll_p = 2,
|
|
.pll_q = 7,
|
|
.ahb_psc = AHB_PSC_1,
|
|
.apb1_psc = APB_PSC_4,
|
|
.apb2_psc = APB_PSC_2
|
|
};
|
|
#endif
|
|
#else
|
|
#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
|
|
#endif
|
|
#endif
|
|
|
|
int configure_clocks(void)
|
|
{
|
|
/* Reset RCC configuration */
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
|
|
writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
|
|
clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
|
|
| RCC_CR_PLLON));
|
|
writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
|
|
clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
|
|
writel(0, &STM32_RCC->cir); /* Disable all interrupts */
|
|
|
|
/* Configure for HSE+PLL operation */
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
|
|
while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
|
|
;
|
|
|
|
/* Enable high performance mode, System frequency up to 180 MHz */
|
|
setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
|
|
writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
|
|
|
|
setbits_le32(&STM32_RCC->cfgr, ((
|
|
sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
|
|
| (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
|
|
| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
|
|
|
|
writel(sys_pll_psc.pll_m
|
|
| (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT)
|
|
| (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT)
|
|
| (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT),
|
|
&STM32_RCC->pllcfgr);
|
|
setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC);
|
|
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
|
|
|
|
while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
|
|
;
|
|
|
|
stm32_flash_latency_cfg(5);
|
|
clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
|
|
setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
|
|
|
|
while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
|
|
RCC_CFGR_SWS_PLL)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long clock_get(enum clock clck)
|
|
{
|
|
u32 sysclk = 0;
|
|
u32 shift = 0;
|
|
/* Prescaler table lookups for clock computation */
|
|
u8 ahb_psc_table[16] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
|
|
};
|
|
u8 apb_psc_table[8] = {
|
|
0, 0, 0, 0, 1, 2, 3, 4
|
|
};
|
|
|
|
if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
|
|
RCC_CFGR_SWS_PLL) {
|
|
u16 pllm, plln, pllp;
|
|
pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
|
|
plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
|
|
>> RCC_PLLCFGR_PLLN_SHIFT);
|
|
pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
|
|
>> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
|
|
sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
|
|
}
|
|
|
|
switch (clck) {
|
|
case CLOCK_CORE:
|
|
return sysclk;
|
|
break;
|
|
case CLOCK_AHB:
|
|
shift = ahb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
|
|
>> RCC_CFGR_HPRE_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
case CLOCK_APB1:
|
|
shift = apb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
|
|
>> RCC_CFGR_PPRE1_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
case CLOCK_APB2:
|
|
shift = apb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
|
|
>> RCC_CFGR_PPRE2_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
default:
|
|
return 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void clock_setup(int peripheral)
|
|
{
|
|
switch (peripheral) {
|
|
case USART1_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
|
|
break;
|
|
case GPIO_A_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN);
|
|
break;
|
|
case GPIO_B_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN);
|
|
break;
|
|
case GPIO_C_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN);
|
|
break;
|
|
case GPIO_D_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN);
|
|
break;
|
|
case GPIO_E_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN);
|
|
break;
|
|
case GPIO_F_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN);
|
|
break;
|
|
case GPIO_G_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN);
|
|
break;
|
|
case GPIO_H_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN);
|
|
break;
|
|
case GPIO_I_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN);
|
|
break;
|
|
case GPIO_J_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN);
|
|
break;
|
|
case GPIO_K_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|