u-boot/arch/arm/dts
Suman Anna 35f21c3ac6 arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes
The AM65x SoCs has a single dual-core Arm Cortex-R5F processor
subsystem/cluster (MCU_R5FSS0) within the MCU domain. This cluster
can be configured at boot time to be either run in a LockStep mode
or in an Asymmetric Multi Processing (AMP) fashion in Split-mode.
This subsystem has 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in Split-mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
..
include Makefile: Support include files for .dts files 2014-06-20 11:55:03 -06:00
am33xx-clocks.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am33xx-u-boot.dtsi arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi' 2019-02-06 14:07:23 -05:00
am33xx.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am35xx-clocks.dtsi arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5 2017-09-29 14:07:54 -04:00
am43x-epos-evm.dts ARM: dts: AM43x-EPOS Initial Support 2016-05-27 15:47:46 -04:00
am43xx-clocks.dtsi am437x: Add am437x_gp_evm_defconfig using CONFIG_DM 2015-10-22 14:44:00 -04:00
am57xx-beagle-x15-common.dtsi ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15-revb1.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15-revc.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-beagle-x15.dts dts: am57xx-beagle-x15: disable UHS and HS200 support 2018-02-19 16:58:55 +09:00
am57xx-commercial-grade.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am57xx-idk-common.dtsi ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am57xx-industrial-grade.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am335x-baltos.dts arm: baltos: move the board to CONFIG_BLK 2018-12-03 10:44:10 -05:00
am335x-base0033.dts am335x: igep003x: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
am335x-bone-common.dtsi ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2016-05-27 15:47:49 -04:00
am335x-bone.dts ARM: dts: am335x-bone: Enable uart and timer 2016-05-27 15:47:48 -04:00
am335x-boneblack.dts arm: dts: am335x-boneblack: add tick-timer to chosen node 2016-01-20 19:06:21 -07:00
am335x-bonegreen.dts ARM: dts: AM335x-BBG: Add initial support 2016-05-27 15:47:49 -04:00
am335x-brppt1-mmc.dts board/BuR/brppt1: convert brppt1 boards to driver model 2018-07-19 17:03:35 -04:00
am335x-brppt1-nand.dts board/BuR/brppt1: convert brppt1 boards to driver model 2018-07-19 17:03:35 -04:00
am335x-brppt1-spi.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
am335x-brsmarc1.dts board/BuR/brsmarc1: initial commit 2019-08-12 13:33:37 -04:00
am335x-brxre1.dts board/BuR/brxre1: convert do DM 2019-02-19 08:55:43 -05:00
am335x-chiliboard-u-boot.dtsi ARM: dts: am335x-chiliboard: add /chosen/stdout-path 2018-11-26 22:52:13 -05:00
am335x-chiliboard.dts ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS files 2018-11-26 22:52:13 -05:00
am335x-chilisom.dtsi ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS files 2018-11-26 22:52:13 -05:00
am335x-draco.dts arm, am335x: siemens: enable DM/DTS support 2016-06-17 09:51:05 -04:00
am335x-draco.dtsi arm, am335x: siemens: enable DM/DTS support 2016-06-17 09:51:05 -04:00
am335x-evm-u-boot.dtsi ARM: DTS: am335x-evm: Use USB0 in peripheral mode 2019-02-01 09:09:40 -05:00
am335x-evm.dts arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am335x-evmsk.dts arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am335x-guardian-u-boot.dtsi am335x, guardian: Add support for the bosch guardian board 2019-04-12 08:05:48 -04:00
am335x-guardian.dts am335x, guardian: Add support for the bosch guardian board 2019-04-12 08:05:48 -04:00
am335x-icev2.dts ARM: dts: AM335x-ICEv2: Add minimal dts support 2016-05-27 15:47:53 -04:00
am335x-igep0033.dtsi am335x: igep003x: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
am335x-osd335x-common.dtsi ti: Add device-tree for am335x-pocketbeagle. 2019-05-03 07:30:31 -04:00
am335x-pdu001-u-boot.dtsi arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC 2018-12-07 08:13:46 -05:00
am335x-pdu001.dts arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2 2019-01-18 13:40:35 -05:00
am335x-phycore-som.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-pocketbeagle.dts ti: Add device-tree for am335x-pocketbeagle. 2019-05-03 07:30:31 -04:00
am335x-pxm2.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am335x-pxm50.dts arm, am335x: siemens: enable DM/DTS support 2016-06-17 09:51:05 -04:00
am335x-rut.dts arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
am335x-shc-u-boot.dtsi ARM: dts: am335x-shc: add u-boot specific dtsi 2019-02-01 09:09:40 -05:00
am335x-shc.dts arm: dts: add am335x-shc.dts for shc board 2019-02-01 09:09:40 -05:00
am335x-sl50.dts am335x: sl50: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
am335x-wega-rdk-u-boot.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-wega-rdk.dts ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am335x-wega.dtsi ARM: am335x: Add phyCORE AM335x R2 support 2019-07-13 11:11:28 -04:00
am437x-cm-t43.dts arm: am437x: cm-t43: Add device tree, enable OF_CONTROL 2019-09-13 11:56:08 -04:00
am437x-gp-evm-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am437x-gp-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2016-04-18 12:29:18 -04:00
am437x-idk-evm-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am437x-idk-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
am437x-sk-evm-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am437x-sk-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
am571x-idk.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am572x-idk-common.dtsi ARM: dts: am574x-idk: Add initial support 2018-01-19 15:49:27 -05:00
am572x-idk.dts ARM: dts: am57xx: Disable voltage switching for SD card 2019-07-26 22:24:11 -04:00
am574x-idk.dts ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2 2019-07-26 22:24:10 -04:00
am3517-evm-u-boot.dtsi ARM: am3517-evm: Migrate to SPL_OF_CONTROL 2019-07-26 22:24:12 -04:00
am3517-evm-ui.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.20 2018-12-07 08:13:48 -05:00
am3517-evm.dts ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3 2019-02-01 09:14:21 -05:00
am3517-som.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.20 2018-12-07 08:13:48 -05:00
am3517-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
am3517.dtsi ARM: DTS: Resync am3517-evm.dts with Linux 4.19 2018-11-16 13:34:37 -05:00
am4372-generic-u-boot.dtsi dts: Add a u-boot specific dtsi file for the am4372 2018-12-14 17:59:09 +01:00
am4372-generic.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
am4372-u-boot.dtsi ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL 2019-02-01 09:14:21 -05:00
am4372.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
armada-37xx.dtsi watchdog: Add support for Armada 37xx CPU watchdog 2018-05-14 10:00:15 +02:00
armada-38x-controlcenterdc.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-38x-solidrun-microsom.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-38x.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-370-xp.dtsi arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs" 2019-05-20 09:27:36 +02:00
armada-371x.dtsi arm64: mvebu: Armada 3700: Add Armada 37xx dts files 2016-09-27 17:29:53 +02:00
armada-372x.dtsi arm64: mvebu: Armada 3700: Add Armada 37xx dts files 2016-09-27 17:29:53 +02:00
armada-375-db.dts arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 2016-04-04 11:22:10 +02:00
armada-375.dtsi arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20 2019-02-05 14:22:49 +01:00
armada-380.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-385-atl-x530-u-boot.dtsi arm: mvebu: x530: Enable watchdog in SPL and U-Boot 2019-04-12 07:04:18 +02:00
armada-385-atl-x530.dts ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530.dtsi ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530DP.dts ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-atl-x530DP.dtsi ARM: mvebu: add support for Allied Telesis x530 2019-01-21 11:39:50 +01:00
armada-385-db-88f6820-amc.dts ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0 2019-04-12 07:20:20 +02:00
armada-385-turris-omnia-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-385-turris-omnia.dts ARM: mvebu: use correct name for pcie controller 2019-03-19 09:22:05 +01:00
armada-385.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-388-clearfog-u-boot.dtsi arm: mvebu: clearfog: enable SATA in SPL 2019-07-11 10:58:02 +02:00
armada-388-clearfog.dts ARM: mvebu: use correct name for pcie controller 2019-03-19 09:22:05 +01:00
armada-388-gp.dts ARM: mvebu: use correct name for pcie controller 2019-03-19 09:22:05 +01:00
armada-388-helios4-u-boot.dtsi arm: mvebu: helios4: add MMC to SPL DT 2019-06-04 08:33:24 +02:00
armada-388-helios4.dts arm: mvebu: helios4: remove duplicate sdhci pins node 2018-08-07 10:53:52 +02:00
armada-388.dtsi ARM: mvebu: sync Armada-38x dts with Linux 4.20 2019-01-21 11:39:49 +01:00
armada-3720-db.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-espressobin.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-turris-mox.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-3720-uDPU-u-boot.dtsi arm64: mvebu: Add basic support for uDPU board 2019-02-05 14:23:06 +01:00
armada-3720-uDPU.dts arm64: mvebu: Add basic support for uDPU board 2019-02-05 14:23:06 +01:00
armada-7040-db-nand.dts arm64: a8k: dts: Add support for NAND devices on A8K platform 2017-05-09 13:38:18 +02:00
armada-7040-db.dts arm64: mvebu: armada-7040-db: Enable 10GB port 0 / SFI (KR) 2017-05-31 07:39:06 +02:00
armada-7040.dtsi arm64: mvebu: gpio: Add GPIO nodes to A8K family devices 2017-03-29 07:38:08 +02:00
armada-8020.dtsi arm64: mvebu: Add Armada-80x0 dts/dtsi files 2016-12-05 13:28:23 +01:00
armada-8040-clearfog-gt-8k.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
armada-8040-db.dts dts: mvebu: a80x0: Enable SD/eMMC interfaces 2018-05-29 08:33:05 +02:00
armada-8040-mcbin.dts arm: mvebu: mcbin: dts: fix PCIe reset polarity 2019-02-11 09:39:12 +01:00
armada-8040.dtsi arm64: mvebu: gpio: Add GPIO nodes to A8K family devices 2017-03-29 07:38:08 +02:00
armada-ap806-quad.dtsi arm64: mvebu: Armada 7K/8K: Add Armada 7K/8K dts files 2016-09-27 17:29:54 +02:00
armada-ap806.dtsi arm64: dts: marvell: armada-ap806: reserve PSCI area 2019-01-21 11:39:50 +01:00
armada-cp110-master.dtsi arm: dts: Set custom names for cp110 master/slave MDIO buses 2019-09-04 11:37:19 -05:00
armada-cp110-slave.dtsi arm: dts: Set custom names for cp110 master/slave MDIO buses 2019-09-04 11:37:19 -05:00
armada-xp-98dx3236.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-98dx3336.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-98dx4251.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-crs305-1g-4s-u-boot.dtsi arm: mvebu: Add CRS305-1G-4S board 2019-05-09 07:35:04 +02:00
armada-xp-crs305-1g-4s.dts arm: mvebu: Add CRS305-1G-4S board 2019-05-09 07:35:04 +02:00
armada-xp-db-xc3-24g4xg-u-boot.dtsi arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-db-xc3-24g4xg.dts arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
armada-xp-gp.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-maxbcm.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78230.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78260.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-mv78460.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-synology-ds414.dts arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armada-xp-theadorable.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
armada-xp.dtsi arm: sync armada-xp dts files from Linux 5.0 2019-04-12 07:04:18 +02:00
armv7-m.dtsi ARM: DTS: stm32: add stm32f746-disco device tree files 2017-01-28 14:04:42 -05:00
ast2500-evb.dts ARM: dts: ast2500: Add SDHCI nodes 2019-09-05 15:27:31 +08:00
ast2500-u-boot.dtsi ARM: dts: ast2500: Add SDHCI nodes 2019-09-05 15:27:31 +08:00
ast2500.dtsi aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level 2018-11-05 10:41:58 -06:00
at91-sama5d2_icp-u-boot.dtsi board: atmel: add SAMA5D2 ICP board 2019-04-18 09:43:22 +03:00
at91-sama5d2_icp.dts ARM: dts: at91-sama5d2-icp: Add MACB node 2019-04-18 09:43:22 +03:00
at91-sama5d2_ptc_ek.dts ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d2_xplained.dts ARM: dts: at91: sama5d2_xplained: fix QSPI0 node 2019-07-09 09:26:43 +03:00
at91-sama5d3_xplained.dts ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d4_xplained.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91-sama5d4ek.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91-sama5d27_som1_ek.dts ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
at91-sama5d27_wlsom1_ek-u-boot.dtsi ARM: dts: at91: sama5d27_wlsom1: add hlcdc node 2019-10-08 09:16:11 +03:00
at91-sama5d27_wlsom1_ek.dts ARM: dts: at91: sama5d27_wlsom1: add hlcdc node 2019-10-08 09:16:11 +03:00
at91-vinco.dts at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9g15.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g15ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g20-taurus.dts at91: cleanup taurus port 2019-05-03 07:30:31 -04:00
at91sam9g20.dtsi ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek.dts ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek_2mmc.dts ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek 2017-05-09 12:14:15 -06:00
at91sam9g20ek_common.dtsi board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:36 -04:00
at91sam9g25-gardena-smart-gateway-u-boot.dtsi arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
at91sam9g25-gardena-smart-gateway.dts arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
at91sam9g25.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g25ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g35.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g35ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9g45-corvus.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
at91sam9g45-gurnard.dts arm: at91: Add support for gurnard 2016-06-12 23:49:38 +02:00
at91sam9g45.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9m10g45ek.dts ARM: dts: at91: Add dts files for at91sam9m10g45ek 2017-05-09 12:14:15 -06:00
at91sam9n12.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9n12ek.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91sam9rl.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9rlek.dts ARM: dts: at91: Add dts files for at91sam9rlek 2017-05-09 12:14:15 -06:00
at91sam9x5.dtsi arm: at91: at91sam9x5.dtsi: Add watchdog handle 2019-04-09 09:28:50 +03:00
at91sam9x5_can.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_isi.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_lcd.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_macb0.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_macb1.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5_usart3.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5cm.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5dm.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x5ek.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
at91sam9x25.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x25ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x35.dtsi ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9x35ek.dts ARM: dts: at91: Add dts files for at91sam9x5ek 2017-05-09 12:14:15 -06:00
at91sam9xe.dtsi board: ethernut5: Update to support DT and DM 2017-08-04 20:38:37 -04:00
at91sam9260-smartweb.dts arm: at91: wdt: Convert watchdog driver to dm/dt 2018-11-16 13:34:34 -05:00
at91sam9260.dtsi at91sam9260.dtsi: add some labels 2019-04-15 17:18:59 +03:00
at91sam9260ek.dts board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:36 -04:00
at91sam9261.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9261ek.dts board: at91sam9261ek: Update to support DT and DM 2017-08-04 20:38:35 -04:00
at91sam9263.dtsi at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
at91sam9263ek.dts board: at91sam9263ek: Use SPI-flash-based AT45xxx DataFlash 2017-08-04 20:38:35 -04:00
avnet-ultra96-rev1.dts arm64: zynqmp: Add support for Avnet Ultra96 2018-08-06 08:44:35 +02:00
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit 2019-07-30 10:20:06 +02:00
avnet-ultrazedev-som-v1.0.dtsi arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit 2019-07-30 10:20:06 +02:00
axp22x.dtsi sunxi: sina33: Sync the device tree with the kernel 2017-10-03 19:12:05 +02:00
axp81x.dtsi ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
axp152.dtsi sunxi: dts: Sync with kernel 2015-08-14 08:37:36 +02:00
axp209.dtsi ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
axp223.dtsi sunxi: sina33: Sync the device tree with the kernel 2017-10-03 19:12:05 +02:00
axp803.dtsi sunxi: DT: A64: update board .dts files from Linux 2018-07-16 12:02:41 +05:30
axp809.dtsi sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
bcm283x-rpi-lan7515.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-rpi-smsc9512.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-rpi-smsc9514.dtsi fdt: update bcm283x device tree sources to Linux 4.14 state 2017-10-16 09:42:51 -04:00
bcm283x-rpi-usb-host.dtsi fdt: update bcm283x device tree sources to Linux 4.14 state 2017-10-16 09:42:51 -04:00
bcm283x-rpi-usb-otg.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm283x-uboot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
bcm283x.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-a-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-a.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b-rev2.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-cm1-io1.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-cm1.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-zero-w.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi-zero.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835-rpi.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2835.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836-rpi-2-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836-rpi.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2836.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-a-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-b-plus.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-3-b.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-cm3-io3.dts fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837-rpi-cm3.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm2837.dtsi fdt: update bcm283x device tree sources to Linux 5.1-rc6 state 2019-06-12 12:23:46 +02:00
bcm6858.dtsi dt: bcm6858: watchdog should use a 50Mhz clock 2019-05-18 12:31:59 -04:00
bcm63158.dtsi dt: bcm63158: watchdog should use a 50Mhz clock 2019-05-18 12:31:59 -04:00
bcm963158.dts dt: bcm963158: enable led controller 2019-04-23 17:57:22 -04:00
bcm968580xref.dts dt: bcm968580xref: enable led controller 2019-04-23 17:57:14 -04:00
bitmain-antminer-s9.dts arm: zynq: Add support for Bitmain Antminer S9 control board 2018-05-31 13:50:39 +02:00
bubblegum_96.dts arm: dts: bubblegum_96: Enable UART5 for serial console 2018-07-09 15:25:37 -04:00
cros-ec-keyboard.dtsi dts: Bring in Chrome OS keyboard device tree definition 2014-12-11 13:18:43 -07:00
cros-ec-sbs.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
da850-evm-u-boot.dtsi ARM: dts: da850-evm: Fix MDIO pinmux 2019-07-31 13:08:07 -04:00
da850-evm.dts ARM: dts: da850-evm: Re-sync with Kernel 5.0 2019-02-01 09:14:21 -05:00
da850-lcdk-u-boot.dtsi davinci: omapl138-lcdk: enable driver model for NAND 2019-07-29 17:58:52 -04:00
da850-lcdk.dts ARM: dts: da850-lcdk: Sync from Linux 4.20 2018-12-07 08:13:50 -05:00
da850-lego-ev3.dts ARM: legoev3: convert to driver model 2019-07-13 11:11:28 -04:00
da850.dtsi ARM: dts: da850: Resync with Linux 5.1.9 2019-07-13 11:11:30 -04:00
dm816x-clocks.dtsi ti816x: Import dts files from Linux Kernel v4.11 2017-06-05 11:02:25 -04:00
dm816x.dtsi arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
dm8168-evm.dts ti816x: Import dts files from Linux Kernel v4.11 2017-06-05 11:02:25 -04:00
dra7-dspeve-thermal.dtsi ARM: dts: dra7xx: sync DT with latest Linux 2016-12-04 13:54:51 -05:00
dra7-evm-common.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra7-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dra7-evm.dts arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra7-iva-thermal.dtsi ARM: dts: dra7xx: sync DT with latest Linux 2016-12-04 13:54:51 -05:00
dra7-mmc-iodelay.dtsi ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup 2019-07-26 22:24:10 -04:00
dra7.dtsi ARM: dts: dra7: Change pbias voltage to 3.3V 2019-04-12 08:05:56 -04:00
dra7xx-clocks.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra71-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dra71-evm.dts ARM: dts: dra71-evm: Correct evm_sd regulator max voltage 2019-04-12 08:05:56 -04:00
dra72-evm-common.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72-evm-revc-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dra72-evm-revc.dts arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72-evm-tps65917.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72-evm.dts arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72x-mmc-iodelay.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra72x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra74x-mmc-iodelay.dtsi ARM: dts: dra74x: Fix iodelay configuration for mmc3 2019-09-13 11:56:30 -04:00
dra74x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dra76-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dra76-evm.dts ARM: dts: dra76-evm: shift to using common IOdelay data 2018-03-13 21:59:28 -04:00
dra76x-mmc-iodelay.dtsi ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values 2019-07-26 22:24:11 -04:00
dra76x.dtsi arm: dts: dra7: sync DT with latest Linux 2017-09-11 16:19:48 -04:00
dragonboard410c-uboot.dtsi dts: db410: fix indentation 2019-01-18 09:16:15 -05:00
dragonboard410c.dts dts: db410c: Add bindings for MSM USB phy 2018-09-30 13:00:36 -04:00
dragonboard820c-uboot.dtsi dts: 820c: Add pinctrl node and uart mux 2019-01-25 12:12:56 -05:00
dragonboard820c.dts dts: 820c: Add pinctrl node and uart mux 2019-01-25 12:12:56 -05:00
ethernut5.dts ARM: dts: ethernut5: Fix the build warning 2017-09-13 09:24:25 -04:00
exynos4.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4x12-pinctrl-uboot.dtsi arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4x12-pinctrl.dtsi exynos4412: dts: fix bad gpio order in pinctrl 2014-10-27 19:21:07 -06:00
exynos4x12.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos5.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos54xx-pinctrl-uboot.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos54xx-pinctrl.dtsi dm: exynos: dts: Adjust device tree files for U-Boot 2014-10-22 10:35:57 -06:00
exynos54xx.dtsi dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos4210-origen.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-pinctrl-uboot.dtsi arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4210-pinctrl.dtsi dm: exynos: dts: Remove unused pinctrl information to save space 2014-10-22 10:34:12 -06:00
exynos4210-smdkv310.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-trats.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4210-universal_c210.dts arm: exynos4: fix warning of dts 2018-08-06 11:24:42 +09:00
exynos4210.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos4412-odroid.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4412-trats2.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos4412.dtsi arm: dts: exynos4: fix the device-tree compile warning 2017-12-05 10:18:39 +09:00
exynos5250-arndale.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos5250-pinctrl-uboot.dtsi arm: exynos5: fix warning of dts 2018-08-06 11:24:45 +09:00
exynos5250-pinctrl.dtsi dm: exynos: dts: Remove unused pinctrl information to save space 2014-10-22 10:34:12 -06:00
exynos5250-smdk5250.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5250-snow.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5250-spring.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5250.dtsi dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5420-peach-pit.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
exynos5420-smdk5420.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos5422-odroidxu3.dts arm: dts: exynos: Adjust whitespace around status property 2019-03-11 15:53:36 +09:00
exynos5800-peach-pi.dts dm: exynos: sound: Convert to use driver model 2018-12-13 16:36:30 -07:00
exynos7420-espresso7420.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
exynos7420.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
fsl-imx8-ca35.dtsi arm: dts: introduce dtsi for i.MX8QXP 2018-10-22 13:00:09 +02:00
fsl-imx8-ca53.dtsi imx: imx8mq: add dtsi file 2018-02-04 12:00:58 +01:00
fsl-imx8dx.dtsi arm: dts: imx: fsl-imx8dx.dtsi: add gpio aliases to fix gpio command 2019-07-19 20:14:50 +02:00
fsl-imx8dxp.dtsi arm: dts: introduce dtsi for i.MX8QXP 2018-10-22 13:00:09 +02:00
fsl-imx8mq-evk.dts imx: add i.MX8MQ EVK support 2019-01-01 14:12:18 +01:00
fsl-imx8mq.dtsi imx: add the i.MX8M reset controller node 2019-10-08 16:36:36 +02:00
fsl-imx8qm-apalis-u-boot.dtsi board: toradex: add apalis imx8qm 4gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qm-apalis.dts board: toradex: add apalis imx8qm 4gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qm-mek-u-boot.dtsi imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
fsl-imx8qm-mek.dts imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
fsl-imx8qm.dtsi arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command 2019-10-08 16:35:16 +02:00
fsl-imx8qxp-colibri-u-boot.dtsi board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qxp-colibri.dts board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
fsl-imx8qxp-mek-u-boot.dtsi imx8qxp: mek: enable dm-spl for pm 2019-04-25 17:03:25 +02:00
fsl-imx8qxp-mek.dts dts: imx8qxp-mek: Add PHY post reset delay 2019-04-08 15:24:39 +02:00
fsl-imx8qxp.dtsi arm: dts: introduce dtsi for i.MX8QXP 2018-10-22 13:00:09 +02:00
fsl-ls1012a-2g5rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-frdm.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-frdm.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-frwy.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-qds.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1012a-rdb.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1012a-rdb.dtsi dts: armv8: add emmc hs200 support for ls1012ardb 2019-09-12 14:03:10 +05:30
fsl-ls1012a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1028a-qds.dts arm: dts: ls1028a-qds: define the MDIO MUX 2019-09-12 16:15:31 +05:30
fsl-ls1028a-rdb.dts dts: armv8: add emmc hs200 support for ls1028ardb 2019-09-12 14:04:43 +05:30
fsl-ls1028a.dtsi arm: dts: ls1028a updates for network interfaces 2019-07-25 13:13:30 -05:00
fsl-ls1043a-qds-duart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1043a-qds-lpuart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1043a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1043a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1043a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1046a-frwy.dts armv8: ls1046afrwy: Add support for LS1046AFRWY platform 2019-06-19 12:54:57 +05:30
fsl-ls1046a-qds-duart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1046a-qds-lpuart.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
fsl-ls1046a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1046a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls1046a.dtsi ARM: dts: Freescale: Add ecc addr for sata node 2019-05-22 12:24:24 +05:30
fsl-ls1088a-qds.dts armv8: dts: ls1088aqds : Add pcf2127 node 2019-08-22 09:07:36 +05:30
fsl-ls1088a-rdb.dts armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller 2019-08-22 09:07:36 +05:30
fsl-ls1088a.dtsi armv8: dts: ls1088a: add I2C node support 2019-08-22 09:07:36 +05:30
fsl-ls2080a-qds.dts armv8: dts: ls2088aqds : Add ds3232 node 2019-08-22 09:07:36 +05:30
fsl-ls2080a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls2080a.dtsi armv8: dts: fsl-ls2088a: add i2c node support 2019-08-22 09:07:36 +05:30
fsl-ls2081a-rdb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
fsl-ls2088a-rdb-qspi.dts armv8: dts: ls2088ardb: Add slave nodes under the i2c0 2019-08-22 09:07:36 +05:30
fsl-lx2160a-qds.dts armv8: dts: lx2160aqds : Add pcf2127 node 2019-08-22 09:07:35 +05:30
fsl-lx2160a-rdb.dts dts: armv8: add emmc hs200 support for lx2160ardb 2019-09-12 14:04:09 +05:30
fsl-lx2160a.dtsi armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes 2019-08-22 09:07:35 +05:30
hi3660-hikey960-u-boot.dtsi arm: dts: Add devicetree for Hikey960 board 2019-08-11 16:43:41 -04:00
hi3660-hikey960.dts arm: dts: Add devicetree for Hikey960 board 2019-08-11 16:43:41 -04:00
hi3660.dtsi arm: dts: Import HI3660 devicetree from Linux 2019-08-11 16:43:41 -04:00
hi3798cv200-poplar.dts arm64: dt: poplar: add optee node 2019-01-26 08:13:54 -05:00
hi3798cv200-u-boot.dtsi poplar: enable Ethernet driver support 2019-04-23 17:57:25 -04:00
hi3798cv200.dtsi poplar: sync up device tree with kernel 4.20 2019-01-25 12:12:56 -05:00
hi6220-hikey-u-boot.dtsi arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hi6220-hikey.dts arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hi6220.dtsi arm: dts: Add MMC nodes for HiKey board 2019-01-15 15:28:21 -05:00
hikey960-pinctrl.dtsi arm: dts: Import HI3660 devicetree from Linux 2019-08-11 16:43:41 -04:00
imx6-apalis.dts apalis_imx6: migrate to using device tree 2019-04-13 20:30:08 +02:00
imx6-colibri.dts colibri_imx6: migrate to using device tree 2019-04-13 20:30:09 +02:00
imx6-logicpd-baseboard.dtsi ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6-logicpd-som.dtsi ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6dl-dhcom-pdk2.dts ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree 2019-07-19 20:32:24 +02:00
imx6dl-icore-mipi-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore-mipi.dts ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6dl-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore-rqs.dts ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi 2018-03-11 15:59:43 +01:00
imx6dl-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-icore.dts arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo 2016-10-26 16:53:16 +02:00
imx6dl-mamoj-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6dl-mamoj.dts i.MX6DL: mamoj: Add PFUZE100 support 2018-05-18 08:23:43 +02:00
imx6dl-nitrogen6x.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6dl-pico.dts pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6dl-pinfunc.h arm: dts: imx6dl: Add pinctrl defines 2016-10-26 16:53:16 +02:00
imx6dl-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6dl-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6dl-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6dl-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6dl-wandboard-revb1.dts wandboard: Sync with devicetree files from kernel 5.1.9 2019-07-04 14:19:48 +02:00
imx6dl.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-bx50v3.dts board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH 2019-04-13 20:30:08 +02:00
imx6q-cm-fx6.dts ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree with Linux 2017-12-29 11:17:22 +01:00
imx6q-dhcom-pdk2.dts ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6q-display5-u-boot.dtsi DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET) 2019-10-08 16:35:59 +02:00
imx6q-display5.dts DTS: imx: Add display5 board (imx6q based) device tree description (v5.1) 2019-07-19 20:14:50 +02:00
imx6q-icore-mipi-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore-mipi.dts ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6q-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore-rqs.dts arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support 2016-12-16 17:16:10 +01:00
imx6q-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6q-icore.dts arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual 2016-10-26 16:53:16 +02:00
imx6q-logicpd-u-boot.dtsi ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL 2019-10-04 12:21:23 -04:00
imx6q-logicpd.dts ARM: DTS: imx6q-logicpd: Resync with Linux 5.1 2019-06-05 12:14:02 -04:00
imx6q-nitrogen6x.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6q-novena.dts ARM: imx: novena: Convert block devices to DM 2019-06-11 10:42:48 +02:00
imx6q-pico.dts pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6q-pinfunc.h arm: dts: imx6q: Add pinctrl defines 2016-10-26 16:53:16 +02:00
imx6q-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6q-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-sabrelite.dts nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6q-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6q-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6q-tbs2910.dts board: tbs2910: Add device tree 2019-04-13 20:30:09 +02:00
imx6q-wandboard-revb1.dts wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6q.dtsi imx: mx6sabresd: fix boot hang with video 2019-05-20 11:58:01 +02:00
imx6qdl-dhcom-pdk2.dtsi ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6qdl-dhcom.dtsi ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite 2019-07-19 20:32:24 +02:00
imx6qdl-icore-rqs-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6qdl-icore-rqs.dtsi ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6qdl-icore-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6qdl-icore.dtsi ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6qdl-nitrogen6x.dtsi nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6qdl-pico.dtsi pico-imx6: Add initial support 2019-10-08 16:35:59 +02:00
imx6qdl-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qdl-sabreauto.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qdl-sabrelite.dtsi nitrogen6x: migrate to using device tree 2019-10-08 16:35:16 +02:00
imx6qdl-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qdl-sabresd.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qdl-u-boot.dtsi imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi 2019-10-08 16:35:58 +02:00
imx6qdl-wandboard-revb1.dtsi wandboard: Sync with devicetree files from kernel 5.1.9 2019-07-04 14:19:48 +02:00
imx6qdl-wandboard-revd1.dtsi wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6qdl-wandboard.dtsi imx: wandboard: convert FEC support to DM_ETH 2019-10-08 16:36:36 +02:00
imx6qdl.dtsi imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi 2019-10-08 16:35:58 +02:00
imx6qp-sabreauto-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qp-sabreauto.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qp-sabresd-u-boot.dtsi arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files 2019-02-15 22:01:15 +01:00
imx6qp-sabresd.dts arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6qp-wandboard-revd1.dts wandboard: Import extra wandboard devicetree files 2019-07-04 14:19:48 +02:00
imx6qp.dtsi arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] 2019-02-15 22:01:15 +01:00
imx6sl-evk.dts imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sl-pinfunc.h imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sl.dtsi imx: mx6slevk: introduce device tree support 2017-03-20 19:00:43 +01:00
imx6sll-evk.dts arm: imx: add i.MX6SLL EVK board support 2016-12-16 11:38:24 +01:00
imx6sll-pinfunc.h arm: dts: add i.MX6SLL device tree 2016-12-16 11:38:24 +01:00
imx6sll.dtsi arm: dts: add i.MX6SLL device tree 2016-12-16 11:38:24 +01:00
imx6sx-pinfunc.h imx: mx6sx: add dts for mx6sxsabreauto board 2017-01-27 10:52:10 +01:00
imx6sx-sabreauto-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx6sx-sabreauto.dts imx: imx6sx-sabreauto: convert to use DM QSPI driver 2018-09-04 08:47:23 +02:00
imx6sx-sdb-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx6sx-sdb.dts ARM: imx: Introduce dts for i.MX6SX-SDB 2018-01-12 14:28:04 +01:00
imx6sx-sdb.dtsi ARM: imx: Introduce dts for i.MX6SX-SDB 2018-01-12 14:28:04 +01:00
imx6sx-softing-vining-2000.dts ARM: imx: vining2000: Convert MMC and block to DM 2019-06-11 10:42:48 +02:00
imx6sx.dtsi imx: imx6sx-sdb: Enable DM QSPI driver 2018-09-04 08:47:23 +02:00
imx6ul-9x9-evk-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx6ul-9x9-evk.dts dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards 2018-09-04 08:47:23 +02:00
imx6ul-14x14-evk-u-boot.dtsi imx: mx6ul_14x14_evk: convert to DM_VIDEO 2019-10-08 16:33:45 +02:00
imx6ul-14x14-evk.dts arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ul-14x14-evk.dtsi arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ul-geam-u-boot.dtsi imx6ul: geam: Fix fdt_file mismatch 2018-06-27 09:51:49 +02:00
imx6ul-geam.dts imx6ul: geam: Fix fdt_file mismatch 2018-06-27 09:51:49 +02:00
imx6ul-isiot-emmc-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul-isiot-emmc.dts ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-isiot-nand.dts ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-isiot-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul-isiot.dtsi ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl 2018-05-18 08:23:43 +02:00
imx6ul-liteboard.dts ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard 2019-02-15 12:45:15 +01:00
imx6ul-litesom.dtsi ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard 2019-02-15 12:45:15 +01:00
imx6ul-opos6ul-u-boot.dtsi ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-opos6ul.dtsi ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-opos6uldev-u-boot.dtsi ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-opos6uldev.dts ARM: opos6ul: make the board boot again 2018-10-09 18:36:03 +02:00
imx6ul-phycore-segin.dts imx: Extend PCL063 support for phyCORE-i.MX6ULL SOM 2019-06-11 10:42:48 +02:00
imx6ul-pico-hobbit.dts pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pico-pi.dts pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pico.dtsi pico-imx6ul: Import dts files from kernel 2019-03-13 09:14:35 +01:00
imx6ul-pinfunc.h arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ul-u-boot.dtsi Fixup various SPDX tags from the latest merge 2018-05-18 17:56:50 -04:00
imx6ul.dtsi arm: dts: sync dts for i.MX6UL 2019-10-08 16:33:45 +02:00
imx6ull-14x14-evk.dts arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-colibri.dts ARM: dts: colibri-imx6ull: extend lcdif node 2019-07-29 00:12:02 +02:00
imx6ull-dart-6ul.dts imx: Add variscite DART-6UL Evaluation Kit 2019-04-25 19:16:24 +02:00
imx6ull-dart-6ul.dtsi imx: Add variscite DART-6UL Evaluation Kit 2019-04-25 19:16:24 +02:00
imx6ull-phycore-segin.dts imx: Extend PCL063 support for phyCORE-i.MX6ULL SOM 2019-06-11 10:42:48 +02:00
imx6ull-pinfunc-snvs.h arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-pinfunc.h arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ull-u-boot.dtsi ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl 2019-06-11 10:42:48 +02:00
imx6ull.dtsi arm: dts: sync dts for i.MX6ULL 2019-10-08 16:33:45 +02:00
imx6ulz-14x14-evk.dts imx: add i.MX6ULZ board 2019-10-08 16:33:45 +02:00
imx6ulz.dtsi arm: dts: import dts for i.MX6ULZ 2019-10-08 16:33:45 +02:00
imx7-colibri-emmc.dts u-boot-imx-20190612 2019-06-11 13:41:24 -04:00
imx7-colibri-rawnand.dts colibri_imx7: migrate usb to driver model 2019-06-11 10:42:48 +02:00
imx7-colibri.dtsi ARM: dts: colibri_imx7: Fix lcdif node definition 2019-07-29 00:11:29 +02:00
imx7d-pico-hobbit.dts Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM 2019-04-25 19:16:24 +02:00
imx7d-pico-pi.dts Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM 2019-04-25 19:16:24 +02:00
imx7d-pico-u-boot.dtsi pico-imx7d: Remove dead code for dm_video 2019-10-08 16:36:37 +02:00
imx7d-pico.dtsi ARM: dts: pico-imx7d: sync device tree with v5.3-rc6 2019-10-08 16:35:59 +02:00
imx7d-pinfunc.h arm: dts: imx7: Correct spelling mistake in GPIO name 2019-01-28 20:55:46 +01:00
imx7d-sdb-qspi-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
imx7d-sdb-qspi.dts imx: imx7d-sdb: Add DM QSPI support 2018-09-04 08:47:23 +02:00
imx7d-sdb.dts imx: imx7d-sdb: Add DM QSPI support 2018-09-04 08:47:23 +02:00
imx7d.dtsi imx: imx7d-sdb: Add DM QSPI support 2018-09-04 08:47:23 +02:00
imx7s-warp.dts warp7: Switch to DM USB 2019-04-25 19:21:00 +02:00
imx7s.dtsi imx: imx7d-sdb: Add DM QSPI support 2018-09-04 08:47:23 +02:00
imx7ulp-evk.dts imx: imx7ulp: add EVK board support 2017-03-17 09:27:08 +01:00
imx7ulp-pinfunc.h arm: dts: add i.MX7ULP dtsi file 2017-03-17 09:27:08 +01:00
imx7ulp-uboot.dtsi imx: imx7ulp: add EVK board support 2017-03-17 09:27:08 +01:00
imx7ulp.dtsi imx: mx7ulp: modify lpi2c seq number 2018-01-16 06:59:15 +01:00
imx8mm-evk-u-boot.dtsi imx: Add i.MX8MM EVK board support. 2019-10-08 16:36:36 +02:00
imx8mm-evk.dts imx: Add i.MX8MM EVK board support. 2019-10-08 16:36:36 +02:00
imx8mm-pinfunc.h arm: dts: add i.MX8MM pin func 2019-10-08 16:36:36 +02:00
imx8mm.dtsi arm: dts: import i.MX8MM dtsi 2019-10-08 16:36:36 +02:00
imx28-pinfunc.h ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
imx28-u-boot.dtsi dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file 2019-10-08 16:36:36 +02:00
imx28.dtsi ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
imx53-cx9020.dts dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC 2019-01-28 20:55:46 +01:00
imx53-kp-u-boot.dtsi DTS: imx53: Add imx53-kp-u-boot.dtsi file with u-boot specific property 2019-04-11 15:21:33 +02:00
imx53-kp.dts DTS: Enable USB host support (including regulators) on HSC|DDC boards 2019-04-25 17:03:25 +02:00
imx53-m53.dtsi ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux 2019-06-27 14:14:23 +02:00
imx53-m53menlo-u-boot.dtsi ARM: imx: m53menlo: Convert WDT support to DM 2019-07-19 20:14:50 +02:00
imx53-m53menlo.dts ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux 2019-06-27 14:14:23 +02:00
imx53-pinfunc.h dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl 2018-05-17 12:13:00 +02:00
imx53-ppd.dts board: ge: ppd: Enable CONFIG_DM_MMC 2019-04-13 20:30:08 +02:00
imx53.dtsi ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux 2019-06-27 14:14:12 +02:00
k3-am65-main.dtsi arm: dts: k3-am65: add support for PCIe and SERDES 2019-08-12 13:33:40 -04:00
k3-am65-mcu.dtsi arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes 2019-10-11 10:07:35 -04:00
k3-am65-wakeup.dtsi arm: dts: k3-am654: Update power-domains property for each node 2019-07-26 21:49:23 -04:00
k3-am65.dtsi arm: dts: k3-am65: add support for PCIe and SERDES 2019-08-12 13:33:40 -04:00
k3-am654-base-board-ddr4-1600MHz.dtsi armv7r: dts: am654: Add initial support 2018-11-16 16:51:59 -05:00
k3-am654-base-board-u-boot.dtsi arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property 2019-07-31 13:08:07 -04:00
k3-am654-base-board.dts arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes 2019-10-11 10:07:35 -04:00
k3-am654-ddr.dtsi arm: dts: k3-am654: Update power-domains property for each node 2019-07-26 21:49:23 -04:00
k3-am654-r5-base-board.dts armv7R: dts: k3: am654: Add MCU_UART0 related definitions 2019-10-11 10:07:33 -04:00
k3-am654.dtsi arm64: dts: k3: Add Support for AM654 SoC 2018-09-11 08:32:55 -04:00
k3-j721e-common-proc-board-u-boot.dtsi arm: dts: k3-j721e: Add r5 specific dt support 2019-07-26 21:49:29 -04:00
k3-j721e-common-proc-board.dts arm: dts: k3-j721e-main: Add C71x DSP node 2019-10-11 10:07:35 -04:00
k3-j721e-main.dtsi arm: dts: k3-j721e-main: Add C71x DSP node 2019-10-11 10:07:35 -04:00
k3-j721e-mcu-wakeup.dtsi arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node 2019-10-11 10:07:34 -04:00
k3-j721e-r5-common-proc-board.dts arm: dts: k3-j721e: Add r5 specific dt support 2019-07-26 21:49:29 -04:00
k3-j721e-som-p0.dtsi arm: dts: k3-j721e: Add initial support for common processor board 2019-07-26 21:49:29 -04:00
k3-j721e.dtsi arm: dts: ti: Add Support for J721E SoC 2019-07-26 21:49:28 -04:00
keystone-clocks.dtsi ARM: dts: Keystone2: Import generic dt files from Linux Kernel 2015-10-22 14:19:50 -04:00
keystone-k2e-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2e-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2e-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2e-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2e.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2g-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-evm.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
keystone-k2g-generic-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-generic.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-ice-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2g-ice.dts Merge branch 'master' of git://git.denx.de/u-boot-spi 2019-04-14 00:03:06 -04:00
keystone-k2g-netcp.dtsi ARM: dts: k2g: Disable netcp by default 2017-07-10 14:26:00 -04:00
keystone-k2g.dtsi ARM: dts: k2g-evm: enable USB0 and USB1 2018-12-14 17:59:09 +01:00
keystone-k2hk-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2hk-evm-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
keystone-k2hk-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2hk-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2hk.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l-clocks.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l-evm.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
keystone-k2l-netcp.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone-k2l.dtsi ARM: dts: k2*: Rename the k2* files to keystone-k2* files 2017-02-08 15:56:30 -05:00
keystone.dtsi ARM: dts: keystone2: add I2C aliases for davinci I2C nodes 2017-05-09 09:04:55 +02:00
kirkwood-98dx4122.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-6192.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-6281.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
kirkwood-atl-sbx81lifkw.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-atl-sbx81lifxcat.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-blackarmor-nas220.dts ARM: kirkwood: Add device-tree for nas220 2018-05-17 17:35:25 +02:00
kirkwood-d2net.dts ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2 2018-05-29 08:33:03 +02:00
kirkwood-db-88f6281-spi.dts ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-db-88f6281.dts ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-db.dtsi ARM: kirkwood: add db-88f6281-bp board 2019-04-26 07:35:38 +02:00
kirkwood-dns325.dts ARM: kirkwood: Add device-tree for dns325 2018-05-17 17:35:25 +02:00
kirkwood-dnskw.dtsi ARM: kirkwood: Add device-tree for dns325 2018-05-17 17:35:25 +02:00
kirkwood-dockstar.dts ARM: kirkwood: Add device-tree for dockstar 2018-05-17 17:35:25 +02:00
kirkwood-dreamplug.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ds109.dts ARM: kirkwood: Add device-tree for ds109 2018-05-29 08:33:03 +02:00
kirkwood-goflexnet.dts ARM: kirkwood: Add device-tree for goflexhome 2018-05-17 17:35:25 +02:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: Add device-tree for guruplug 2018-05-17 17:35:25 +02:00
kirkwood-ib62x0.dts ARM: kirkwood: Add device-tree for ib62x0 2018-05-17 17:35:25 +02:00
kirkwood-iconnect.dts ARM: kirkwood: Add device-tree for iconnect 2018-05-17 17:35:25 +02:00
kirkwood-is2.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-km_common.dtsi km/uart: port UART interface of KM Kirkwood boards to driver model 2019-08-12 09:12:38 +02:00
kirkwood-km_kirkwood.dts km/spi: add SPI configuration to KM Kirkwood device tree 2019-07-11 10:58:03 +02:00
kirkwood-lschlv2.dts ARM: kirkwood: Add device-tree for lschlv2 & lsxhl 2018-05-29 08:33:03 +02:00
kirkwood-lsxhl.dts ARM: kirkwood: Add device-tree for lschlv2 & lsxhl 2018-05-29 08:33:03 +02:00
kirkwood-lsxl.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-net2big.dts ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2 2018-05-29 08:33:03 +02:00
kirkwood-netxbig.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ns2-common.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood-ns2.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2lite.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2max.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-ns2mini.dts ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
kirkwood-openrd-base.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd-client.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd-ultimate.dts ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-openrd.dtsi ARM: kirkwood: Add device-tree for openrd 2018-05-17 17:35:25 +02:00
kirkwood-pogo_e02.dts ARM: kirkwood: Add device-tree for pogo_e02 2018-05-17 17:35:26 +02:00
kirkwood-sheevaplug-common.dtsi ARM: kirkwood: Add device-tree for sheevaplug 2018-05-17 17:35:26 +02:00
kirkwood-sheevaplug.dts ARM: kirkwood: Add device-tree for sheevaplug 2018-05-17 17:35:26 +02:00
kirkwood-synology.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
kirkwood.dtsi ARM: add devicetree files for kirkwood SoC 2018-05-17 17:35:25 +02:00
logicpd-som-lv-35xx-devkit-u-boot.dtsi ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB 2019-07-13 11:11:31 -04:00
logicpd-som-lv-35xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv-37xx-devkit-u-boot.dtsi ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB 2019-07-13 11:11:31 -04:00
logicpd-som-lv-37xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv-baseboard.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-som-lv.dtsi ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux 2019-08-26 11:46:20 -04:00
logicpd-torpedo-35xx-devkit-u-boot.dtsi ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB 2019-07-13 11:11:31 -04:00
logicpd-torpedo-35xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-37xx-devkit-u-boot.dtsi ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB 2019-07-13 11:11:31 -04:00
logicpd-torpedo-37xx-devkit.dts ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-baseboard.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
logicpd-torpedo-som.dtsi ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS 2019-07-27 13:36:53 -04:00
ls1021a-iot-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-iot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
ls1021a-qds-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-qds-lpuart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-qds.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
ls1021a-tsn.dts Add support for the NXP LS1021A-TSN board 2019-07-25 13:13:31 -05:00
ls1021a-twr-duart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-twr-lpuart.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1021a-twr.dtsi arm: ls1021atwr: Convert to use driver model TSEC driver 2019-07-25 13:13:31 -05:00
ls1021a.dtsi arm: ls1021atwr: Convert to use driver model TSEC driver 2019-07-25 13:13:31 -05:00
Makefile Xilinx/FPGA changes for v2020.01 2019-10-09 16:22:03 -04:00
meson-axg-s400-u-boot.dtsi arm: dts: s400: Fix status for eMMC and SDIO ports 2018-12-19 16:20:50 +01:00
meson-axg-s400.dts ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
meson-axg.dtsi ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
meson-g12a-sei510.dts ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1 2019-08-12 10:02:30 +02:00
meson-g12a-u200.dts ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1 2019-07-31 12:10:42 +02:00
meson-g12a.dtsi ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1 2019-07-31 12:10:42 +02:00
meson-g12b-odroid-n2.dts ARM: dts: add support for Odroid-N2 2019-07-31 12:10:50 +02:00
meson-g12b.dtsi ARM: dts: add support for Odroid-N2 2019-07-31 12:10:50 +02:00
meson-gx-u-boot.dtsi arm64: dts: meson-gx: add hhi reg entry to hdmi_tx 2019-01-31 09:35:01 +01:00
meson-gx.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxbb-nanopi-k2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxbb-nanopi-k2.dts ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxbb-odroidc2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxbb-odroidc2.dts ARM64: meson: Sync DT with Linux 4.17 2018-06-13 07:49:11 -04:00
meson-gxbb-p20x.dtsi ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb-p200-u-boot.dtsi ARM: dts: meson: add u-boot.dtsi for p200 and p201 2019-04-10 16:48:31 +02:00
meson-gxbb-p200.dts ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb-p201-u-boot.dtsi ARM: dts: meson: add u-boot.dtsi for p200 and p201 2019-04-10 16:48:31 +02:00
meson-gxbb-p201.dts ARM: dts: meson: add p200 and p201 boards 2019-04-10 16:48:31 +02:00
meson-gxbb.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-mali.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-s805x-libretech-ac.dts ARM: dts: Import libretech-ac DT from Linux 5.0 2019-04-10 16:50:46 +02:00
meson-gxl-s905x-khadas-vim-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-khadas-vim.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-libretech-cc-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-libretech-cc.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxl-s905x-p212.dtsi ARM: meson: Add regmap support for clock driver 2018-12-03 13:34:21 +01:00
meson-gxl-s905x.dtsi ARM64: meson: Sync DT with Linux 4.17 2018-06-13 07:49:11 -04:00
meson-gxl.dtsi ARM: dts: Import libretech-ac DT from Linux 5.0 2019-04-10 16:50:46 +02:00
meson-gxm-khadas-vim2-u-boot.dtsi arm64: dts: meson-gx: vpu should be probed before relocation 2019-01-31 09:35:01 +01:00
meson-gxm-khadas-vim2.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2019-01-31 09:35:01 +01:00
meson-gxm.dtsi ARM: meson: Add Khadas VIM2 board DT 2018-10-10 13:32:40 -04:00
mt7623.dtsi ARM: dts: add hifsys reset for MediaTek SoCs 2019-08-07 15:31:03 -04:00
mt7623n-bananapi-bpi-r2.dts arm: dts: add ethernet related node for MT7623 SoC 2019-01-14 17:43:18 -05:00
mt7629-rfb-u-boot.dtsi arm: dts: MediaTek: add device tree for MT7629 2018-11-28 23:04:49 -05:00
mt7629-rfb.dts arm: dts: change MT7629 to use spi-mem rather than qspi 2019-08-07 12:44:12 -04:00
mt7629.dtsi arm: dts: change MT7629 to use spi-mem rather than qspi 2019-08-07 12:44:12 -04:00
mt8516-pumpkin.dts board: mediatek: Add pumpkin board support 2019-07-29 09:32:11 -04:00
mt8516-u-boot.dtsi ARM: MediaTek: Add support for MT8516 SoC 2019-04-23 17:57:26 -04:00
mt8516.dtsi ARM: MediaTek: Add support for MT8516 SoC 2019-04-23 17:57:26 -04:00
mxs-pinfunc.h ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11) 2019-07-19 14:57:14 +02:00
omap-gpmc-smsc911x.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap-gpmc-smsc9221.dtsi OMAP3: Add SMSC9221 device tree for omap devices connected on GPMC. 2017-05-09 20:35:37 -04:00
omap3-beagle-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm-ab-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm-ab.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-beagle-xm-u-boot.dtsi omap3_beagle: Update for DM SPL support 2019-02-19 16:58:23 -05:00
omap3-beagle-xm.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-beagle.dts ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard 2018-01-19 15:49:28 -05:00
omap3-cpu-thermal.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap3-evm-37xx-u-boot.dtsi ARM: omap3: evm: Update DM SPL support 2019-02-19 16:58:24 -05:00
omap3-evm-37xx.dts ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-common.dtsi ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-processor-common.dtsi ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 2019-07-13 11:11:27 -04:00
omap3-evm-u-boot.dtsi ARM: omap3: evm: Update DM SPL support 2019-02-19 16:58:24 -05:00
omap3-evm.dts ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap3-igep.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020-common.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020-u-boot.dtsi omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-igep0020.dts omap3: igep00x0: Add Device Tree Support and DM_MMC driver 2019-01-15 15:28:42 -05:00
omap3-panel-sharp-ls037v7dw01.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap3-u-boot.dtsi ARM: DTS: omap3-u-boot.dtsi 2019-02-19 16:58:23 -05:00
omap3.dtsi ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4 2018-07-23 14:33:21 -04:00
omap3xxx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap4-cpu-thermal.dtsi dra7xx: Add dra72_evm_defconfig using CONFIG_DM 2015-08-12 20:48:08 -04:00
omap5-core-thermal.dtsi dra7xx: Add dra72_evm_defconfig using CONFIG_DM 2015-08-12 20:48:08 -04:00
omap5-gpu-thermal.dtsi dra7xx: Add dra72_evm_defconfig using CONFIG_DM 2015-08-12 20:48:08 -04:00
omap5-u-boot.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
omap34xx-omap36xx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap34xx.dtsi ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} 2018-01-01 09:04:19 -05:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx-omap3430es2plus-clocks.dtsi arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5 2017-09-13 09:24:26 -04:00
omap36xx.dtsi ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4 2018-07-23 14:33:21 -04:00
pcl063-common.dtsi ARM: dts: pcl063: add usdhc reset pin of eMMC 2019-10-08 16:36:36 +02:00
poplar-pinctrl.dtsi poplar: sync up device tree with kernel 4.20 2019-01-25 12:12:56 -05:00
r7s72100-gr-peach-u-boot.dts ARM: renesas: Enable R8A66597 USB host on GR Peach 2019-08-22 18:23:37 +02:00
r7s72100-gr-peach.dts ARM: dts: renesas: Add RZ/A1 GR-Peach board 2019-05-07 05:41:32 +02:00
r7s72100.dtsi ARM: dts: renesas: Add RZ/A1 platform code 2019-05-07 05:41:32 +02:00
r8a779x-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7790-lager-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7790-lager.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7790-stout-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7790-stout.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7790-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7790.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-koelsch-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7791-koelsch.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-porter-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7791-porter.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7791-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7791.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7792-blanche-u-boot.dts ARM: rmobile: Update V2H Blanche 2018-05-20 12:06:55 +02:00
r8a7792-blanche.dts ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a7792-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7792.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7793-gose-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7793-gose.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7793-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7793.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7794-alt-u-boot.dts ARM: dts: rmobile: Enable USB on E2 Alt 2019-04-09 18:19:10 +02:00
r8a7794-alt.dts ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a7794-silk-u-boot.dts ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI 2019-03-09 17:57:04 +01:00
r8a7794-silk.dts ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7794-u-boot.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a7794.dtsi ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-h3ulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7795-h3ulcb.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7795-salvator-x.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7795.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a7796-m3ulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7796-m3ulcb.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7796-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a7796-salvator-x.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a7796-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a7796.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77965-m3nulcb-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77965-m3nulcb.dts ARM: dts: rmobile: Import R8A77965 M3NULCB DTs 2019-04-09 18:19:10 +02:00
r8a77965-salvator-x-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77965-salvator-x.dts ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a77965-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77965.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77970-eagle-u-boot.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
r8a77970-eagle.dts ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
r8a77970-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77970.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77980-condor-u-boot.dts ARM: renesas: Add R8A77980 V3H Condor board code 2019-08-09 23:15:01 +02:00
r8a77980-condor.dts ARM: renesas: Add R8A77980 V3H Condor board code 2019-08-09 23:15:01 +02:00
r8a77980-u-boot.dtsi ARM: dts: renesas: Add R8A77980 V3H DTs and headers 2019-08-09 23:15:01 +02:00
r8a77980.dtsi ARM: dts: renesas: Add R8A77980 V3H DTs and headers 2019-08-09 23:15:01 +02:00
r8a77990-ebisu-u-boot.dts ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator 2019-09-30 02:07:02 +02:00
r8a77990-ebisu.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77990-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77990.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77995-draak-u-boot.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
r8a77995-draak.dts ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
r8a77995-u-boot.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
r8a77995.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
rk3xxx.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk322x.dtsi ARM: dts: rk322x: Correct the uart2 default pin configuration 2019-02-01 16:59:11 +01:00
rk3036-sdk-u-boot.dtsi rockchip: add u-boot specific dts for rk3036 sdk 2017-07-27 14:59:04 +02:00
rk3036-sdk.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3036.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3128-evb.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3128.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3188-radxarock-u-boot.dtsi rockchip: rk3188: add u-boot-specific mmc properties 2018-10-02 09:35:19 +02:00
rk3188-radxarock.dts rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock 2018-10-02 09:35:39 +02:00
rk3188.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3229-evb.dts rockchip: rk322x: dts: enable uart2 for SPL/TPL 2019-05-08 17:34:12 +08:00
rk3288-evb-u-boot.dtsi rockchip: evb-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-evb.dts rockchip: evb-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-evb.dtsi rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node 2018-12-15 20:56:46 +01:00
rk3288-firefly-u-boot.dtsi rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline 2019-07-20 23:59:44 +08:00
rk3288-firefly.dts rockchip: firefly-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-firefly.dtsi rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline 2019-07-20 23:59:44 +08:00
rk3288-miqi-u-boot.dtsi rockchip: miqi-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-miqi.dts rockchip: miqi-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-miqi.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3288-phycore-rdk.dts rockchip: phycore: remove no use "u-boot, boot0" in dts 2019-07-29 10:25:27 +08:00
rk3288-phycore-som.dtsi rockchip: phycore: Add ID page of M24C32-D EEPROM 2017-07-27 14:59:01 +02:00
rk3288-popmetal-u-boot.dtsi rockchip: popmetal-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-popmetal.dts rockchip: popmetal-rk3288: add -u-boot.dtsi 2019-07-20 23:59:44 +08:00
rk3288-popmetal.dtsi rockchip: dts: Enable SARADC for rk3288-popmetal 2017-10-01 00:33:30 +02:00
rk3288-rock2-som.dtsi rockchip: rock2: Bring in device tree files from Linux 2016-01-21 20:42:37 -07:00
rk3288-rock2-square.dts dts: rk3288: remove node in dmc which not need anymore 2016-10-30 13:29:06 -06:00
rk3288-thermal.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3288-tinker-u-boot.dtsi rockchip: rk3288-tinker: Attach missing peripherals at SPL 2019-09-19 09:35:31 +08:00
rk3288-tinker.dts rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3288-tinker.dtsi rockchip: dts: fix unnecessary '-cells' warning 2018-08-29 20:44:50 +02:00
rk3288-u-boot.dtsi rockchip: rk3288: dts: enable spl-boot-order 2019-07-20 23:59:44 +08:00
rk3288-veyron-chromebook.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3288-veyron-jerry.dts sound: rockchip: Add sound support for jerry 2019-02-01 16:59:10 +01:00
rk3288-veyron-mickey.dts rockchip: Add support for veyron-mickey (Chromebit) 2016-11-25 17:59:32 -07:00
rk3288-veyron-minnie.dts rockchip: chromebook_minnie: Enable sound 2019-05-08 17:34:12 +08:00
rk3288-veyron-speedy-u-boot.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3288-veyron-speedy.dts rockchip: add support for veyron-speedy (ASUS Chromebook C201) 2019-02-01 16:59:10 +01:00
rk3288-veyron.dtsi rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order" 2019-07-29 10:25:27 +08:00
rk3288-vyasa-u-boot.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3288-vyasa.dts rk3288: vyasa: Add eMMC boot support 2018-03-13 18:12:36 +01:00
rk3288.dtsi rockchip: dts: rk3288: move reloc tag into -u-boot dts 2019-07-02 11:49:49 +08:00
rk3328-evb-u-boot.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328-evb.dts rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328-rock64-u-boot.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328-rock64.dts rockchip: dts: rk3328-rock64: fix usb power supply 2019-08-23 15:27:40 +08:00
rk3328-sdram-ddr3-666.dtsi rockchip: dts: rk3328: update dmc node for driver 2019-08-05 21:14:53 +08:00
rk3328-sdram-lpddr3-666.dtsi rockchip: dts: rk3328: update dmc node for driver 2019-08-05 21:14:53 +08:00
rk3328-sdram-lpddr3-1600.dtsi rockchip: dts: rk3328: update dmc node for driver 2019-08-05 21:14:53 +08:00
rk3328-u-boot.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3328.dtsi rockchip: rk3328: migrate u-boot node to -u-boot.dtsi 2019-08-23 15:27:40 +08:00
rk3368-geekbox-u-boot.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3368-geekbox.dts rockchip: rk3368: Add initial support for RK3368 based GeekBox 2017-06-07 07:29:20 -06:00
rk3368-lion-u-boot.dtsi rockchip: rk3368-lion: switch to use ARM generic timer 2019-07-20 23:59:44 +08:00
rk3368-lion.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
rk3368-px5-evb-u-boot.dtsi rockchip: evb-px5: switch to use ARM generic timer 2019-07-20 23:59:44 +08:00
rk3368-px5-evb.dts rockchip: dts: Enable SARADC for rk3368-px5-evb 2017-10-01 00:33:30 +02:00
rk3368-sheep-u-boot.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3368-sheep.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3368.dtsi dts: rk3368: make timer0 accessible for SPL and TPL 2017-08-13 17:12:36 +02:00
rk3399-evb-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-evb.dts arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files 2019-05-08 17:34:13 +08:00
rk3399-ficus-u-boot.dtsi arm: dts: ficus: Enable booting from eMMC when using SPL 2019-08-05 21:14:13 +08:00
rk3399-ficus.dts arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-firefly-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-firefly.dts arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files 2019-05-08 17:34:13 +08:00
rk3399-gru-bob-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-gru-bob.dts arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files 2019-05-08 17:34:13 +08:00
rk3399-gru-chromebook.dtsi rockchip: gru: Add extra device-tree settings 2019-02-01 16:59:13 +01:00
rk3399-gru-kevin.dts rockchip: Bring in device tree files for rk3399-gru 2019-02-01 16:59:12 +01:00
rk3399-gru-u-boot.dtsi arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-gru.dtsi rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2 2019-06-26 21:11:28 +08:00
rk3399-khadas-edge-captain-u-boot.dtsi arm64: dts: rockchip: Add support for Khadas Edge-Captain 2019-08-05 21:12:23 +08:00
rk3399-khadas-edge-captain.dts arm64: dts: rockchip: Add support for Khadas Edge-Captain 2019-08-05 21:12:23 +08:00
rk3399-khadas-edge-u-boot.dtsi arm64: dts: rockchip: Add support for Khadas Edge 2019-08-05 21:05:29 +08:00
rk3399-khadas-edge-v-u-boot.dtsi arm64: dts: rockchip: Add support for Khadas Edge-V 2019-08-05 21:05:56 +08:00
rk3399-khadas-edge-v.dts arm64: dts: rockchip: Add support for Khadas Edge-V 2019-08-05 21:05:56 +08:00
rk3399-khadas-edge.dts arm64: dts: rockchip: Add support for Khadas Edge 2019-08-05 21:05:29 +08:00
rk3399-khadas-edge.dtsi arm64: dts: rockchip: Add support for Khadas Edge 2019-08-05 21:05:29 +08:00
rk3399-nanopc-t4-u-boot.dtsi rockchip: rk3399: Add Nanopc T4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopc-t4.dts rockchip: rk3399: Add Nanopc T4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-m4-u-boot.dtsi rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-m4.dts rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi-neo4-u-boot.dtsi rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi 2019-07-20 23:59:44 +08:00
rk3399-nanopi-neo4.dts rockchip: rk3399: Add Nanopi NEO4 board support 2019-05-30 18:22:35 +08:00
rk3399-nanopi4-u-boot.dtsi rockchip: rk3399: Add Nanopi M4 board support 2019-05-09 18:24:31 +08:00
rk3399-nanopi4.dtsi rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux 2019-05-08 17:34:13 +08:00
rk3399-op1-opp.dtsi rockchip: Bring in device tree files for rk3399-gru 2019-02-01 16:59:12 +01:00
rk3399-opp.dtsi rockchip: dts: rk3399: Sync rk3399-opp from Linux 2019-05-01 00:00:04 +02:00
rk3399-orangepi-u-boot.dtsi rockchip: rk3399: Add Orangepi RK3399 support 2019-05-01 00:00:05 +02:00
rk3399-orangepi.dts rockchip: rk3399: Add Orangepi RK3399 support 2019-05-01 00:00:05 +02:00
rk3399-puma-ddr1333.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3399-puma-ddr1600.dts arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi 2019-05-08 17:34:13 +08:00
rk3399-puma-ddr1866.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
rk3399-puma.dtsi rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2 2019-06-26 21:11:28 +08:00
rk3399-roc-pc-u-boot.dtsi rockchip: rk3399: Add ROC-RK3399-PC support 2019-08-19 12:43:26 +08:00
rk3399-roc-pc.dts rockchip: rk3399: Add ROC-RK3399-PC support 2019-08-19 12:43:26 +08:00
rk3399-rock-pi-4-u-boot.dtsi rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi 2019-07-20 23:59:44 +08:00
rk3399-rock-pi-4.dts rockchip: rk3399: Add Rock PI 4 support 2019-05-30 18:22:35 +08:00
rk3399-rock960-u-boot.dtsi arm: dts: rock960: Enable booting from eMMC when using SPL 2019-08-05 21:14:04 +08:00
rk3399-rock960.dts arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-rock960.dtsi arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6 2019-07-19 11:11:09 +08:00
rk3399-rockpro64-u-boot.dtsi rockchip: rk3399: dts: add boot order for rockpro64 2019-09-11 16:16:12 +08:00
rk3399-rockpro64.dts rockchip: rk3399: Add Rockpro64 board support 2019-05-30 18:22:35 +08:00
rk3399-sdram-ddr3-1333.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3399-sdram-ddr3-1600.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3399-sdram-ddr3-1866.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3399-sdram-lpddr3-2GB-1600.dtsi rockchip: rk3399: Add Rock960 CE board support 2018-12-06 16:04:49 +01:00
rk3399-sdram-lpddr3-4GB-1600.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi rockchip: Add settings for Samsung LPDDR3 4GB SDRAM 1866MHz 2019-02-01 16:59:13 +01:00
rk3399-sdram-lpddr4-100.dtsi rockchip: dts: rk3399: Add LPDDR4-100 timings 2019-07-21 00:00:41 +08:00
rk3399-u-boot.dtsi rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmu 2019-07-21 00:00:20 +08:00
rk3399.dtsi rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 2019-05-08 17:34:13 +08:00
rv1108-elgin-r1.dts ARM: rockchip: Add rv1108-elgin-r1 board support 2018-12-16 01:30:11 +01:00
rv1108-evb.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
rv1108.dtsi ARM: dts: rockchip: Add rv1108 USB OTG pinctrl 2018-11-30 21:56:45 +01:00
s5pc1xx-goni.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc1xx-smdkc100.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc100-pinctrl.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s5pc110-pinctrl.dtsi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
s900.dtsi arm: dts: s900: Add UART node 2018-07-09 15:25:35 -04:00
salvator-common.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2 2019-07-23 13:38:23 +02:00
salvator-x.dtsi ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
sam9x60.dtsi ARM: dts: at91: sam9x60: add onewire node 2019-10-08 09:16:11 +03:00
sam9x60ek-u-boot.dtsi ARM: dts: at91: sam9x60ek: Enable qspi node 2019-10-08 09:16:11 +03:00
sam9x60ek.dts ARM: dts: at91: sam9x60ek: add onewire support 2019-10-08 09:16:11 +03:00
sama5d2-pinfunc.h atmel: Bring in at91 pio4 device tree file and bindings 2016-08-15 22:58:04 +02:00
sama5d2.dtsi ARM: dts: at91: sama5d2: add seq for qspi1 2019-10-08 09:16:11 +03:00
sama5d3.dtsi ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:43 -04:00
sama5d3_can.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_emac.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_gmac.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_lcd.dtsi board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
sama5d3_mci2.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_tcb1.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3_uart.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d3xcm.dtsi net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
sama5d3xcm_cmp.dtsi net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
sama5d3xdm.dtsi board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
sama5d3xmb.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d3xmb_cmp.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d4.dtsi ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom 2018-09-28 20:22:44 -04:00
sama5d27_som1.dtsi dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sama5d27_wlsom1.dtsi ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi 2019-10-08 09:16:11 +03:00
sama5d31.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d31ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d33.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d33ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d34.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d34ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d35.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d35ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36.dtsi ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36ek.dts ARM: at91: dt: add dts files for sama5d3xek board 2017-04-13 14:44:50 -06:00
sama5d36ek_cmp.dts board: sama5d3xek: Convert to CONFIG_DM_VIDEO 2017-09-29 17:50:04 +02:00
skeleton.dtsi arm: fdt: Add skeleton device tree file from kernel 2012-03-29 08:12:47 +02:00
skeleton64.dtsi dm: arm: Bring in skeleton64 device tree file from Linux 2015-04-18 11:11:17 -06:00
socfpga-common-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga.dtsi arm: socfpga: move gen5 SDR driver to DM 2019-04-17 22:20:16 +02:00
socfpga_arria5.dtsi dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_arria5_socdk-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_arria5_socdk.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_arria10.dtsi ARM: dts: socfpga: Add missing SDMMC reset 2019-01-11 15:51:38 +01:00
socfpga_arria10_handoff_u-boot.dtsi ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT 2019-05-14 19:53:16 +02:00
socfpga_arria10_socdk.dtsi ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files 2019-05-14 19:53:16 +02:00
socfpga_arria10_socdk_sdmmc.dts ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files 2019-05-14 19:53:16 +02:00
socfpga_arria10_socdk_sdmmc_handoff.dtsi Arm: dts: socfpga: Remove invalid property from chose node 2019-05-24 14:29:51 +02:00
socfpga_cyclone5.dtsi dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_cyclone5_dbm_soc1.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de0_nano_soc-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de0_nano_soc.dts dts: arm: socfpga: merge gen5 devicetrees from linux 2018-11-29 12:45:15 +01:00
socfpga_cyclone5_de1_soc.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_de10_nano.dts dts: arm: socfpga: fix socfpga_de10_nano console 2019-04-29 20:33:23 +02:00
socfpga_cyclone5_is1.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_mcv.dtsi arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_mcvevk-u-boot.dtsi arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_mcvevk.dts arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board 2019-05-14 19:52:39 +02:00
socfpga_cyclone5_socdk-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_socdk.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_sockit-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_sockit.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_cyclone5_socrates-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_socrates.dts arm: socfpga: gen5: sync devicetrees to Linux 2019-04-17 22:20:15 +02:00
socfpga_cyclone5_sr1500.dts arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_vining_fpga-u-boot.dtsi arm: socfpga: gen5: add reset & sdr node to SPL devicetrees 2019-04-17 22:20:16 +02:00
socfpga_cyclone5_vining_fpga.dts net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
socfpga_stratix10.dtsi arm: dts: Stratix10: Add SDRAM node 2019-05-06 12:44:17 +02:00
socfpga_stratix10_socdk-u-boot.dtsi arm: dts: Stratix10: Add QSPI node 2019-04-17 22:20:17 +02:00
socfpga_stratix10_socdk.dts arm: dts: Stratix10: Enable i2c 2019-06-14 12:41:26 +02:00
st-pincfg.h STiH410-B2260: Add device tree 2017-03-14 20:40:21 -04:00
stih407-clock.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih407-family.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih407-pinctrl.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-b2260-u-boot.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-b2260.dts ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-clock.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410-pinctrl.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stih410.dtsi ARM: dts: stih410-b2260: Sync DT with kernel v5.2 2019-08-27 09:36:56 +02:00
stm32f4-pinctrl.dtsi ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f7-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f7-u-boot.dtsi ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi 2019-07-22 11:04:52 +02:00
stm32f429-disco-u-boot.dtsi ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string 2019-07-12 11:50:58 +02:00
stm32f429-disco.dts ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f429-pinctrl.dtsi ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f429.dtsi ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f469-disco-u-boot.dtsi ARM: dts: stm32: Use kernel qspi compatible string for stm32f469-disco-uboot.dtsi 2019-07-22 11:04:52 +02:00
stm32f469-disco.dts ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f469-pinctrl.dtsi ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f469.dtsi ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4 2019-04-23 15:30:57 +02:00
stm32f746-disco-u-boot.dtsi ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in stm32f746-disco-u-boot.dtsi 2019-06-28 09:45:07 +02:00
stm32f746-disco.dts ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f746-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f746.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f769-disco-u-boot.dtsi ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-disco 2019-06-28 09:45:07 +02:00
stm32f769-disco.dts ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32f769-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stm32h7-u-boot.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7 2019-04-23 15:31:17 +02:00
stm32h743-pinctrl.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7 2019-04-23 15:31:17 +02:00
stm32h743.dtsi ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7 2019-04-23 15:31:17 +02:00
stm32h743i-disco-u-boot.dtsi ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7 2019-04-23 15:31:11 +02:00
stm32h743i-disco.dts ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7 2019-04-23 15:31:17 +02:00
stm32h743i-eval-u-boot.dtsi ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval 2019-04-23 15:31:52 +02:00
stm32h743i-eval.dts ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7 2019-04-23 15:31:17 +02:00
stm32mp15-ddr.dtsi ARM: dts: stm32mp1: sync device tree with v5.2-rc4 2019-07-12 11:18:53 +02:00
stm32mp15-ddr3-1x4Gb-1066-binG.dtsi ARM: dts: stm32mp1: DDR config v1.45 2019-08-27 09:36:56 +02:00
stm32mp15-ddr3-2x4Gb-1066-binG.dtsi ARM: dts: stm32mp1: DDR config v1.45 2019-08-27 09:36:56 +02:00
stm32mp157-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157-u-boot.dtsi ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC file 2019-08-27 09:36:56 +02:00
stm32mp157a-avenger96-u-boot.dtsi board: stm32mp1: Add Avenger96 board support 2019-06-06 17:40:12 +02:00
stm32mp157a-avenger96.dts stm32mp1: board: Update the way vdd-supply is retrieved from DT 2019-08-27 11:19:23 +02:00
stm32mp157a-dk1-u-boot.dtsi ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINK 2019-08-27 09:36:56 +02:00
stm32mp157a-dk1.dts stm32mp1: Add remoteproc support for m4 coprocessor 2019-08-27 11:19:23 +02:00
stm32mp157c-dk2-u-boot.dtsi stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot 2019-08-27 11:19:23 +02:00
stm32mp157c-dk2.dts ARM: dts: stm32mp1: sync device tree with v5.2-rc4 2019-07-12 11:18:53 +02:00
stm32mp157c-ed1-u-boot.dtsi stm32mp1: board: support of error led on ed1/ev1 board 2019-08-27 11:19:23 +02:00
stm32mp157c-ed1.dts stm32mp1: Add remoteproc support for m4 coprocessor 2019-08-27 11:19:23 +02:00
stm32mp157c-ev1-u-boot.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157c-ev1.dts ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157c.dtsi stm32mp1: Add remoteproc support for m4 coprocessor 2019-08-27 11:19:23 +02:00
stm32mp157xaa-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xab-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xac-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32mp157xad-pinctrl.dtsi ARM: dts: stm32mp1: sync device tree with v5.3-rc2 2019-08-27 09:36:56 +02:00
stm32429i-eval-u-boot.dtsi ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string 2019-07-12 11:50:58 +02:00
stm32429i-eval.dts ARM: dts: stm32f4: Fix DT dtc warnings 2018-08-13 14:04:04 -04:00
stm32746g-eval-u-boot.dtsi ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-eval 2019-05-06 09:50:27 +02:00
stm32746g-eval.dts ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7 2019-04-23 15:31:06 +02:00
stv0991.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
sun4i-a10-a1000.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-chuwi-v7-cw0825.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-cubieboard.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-dserve-dsrv9703c.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-gemei-g9.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-hackberry.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-hyundai-a7hd.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet-3f.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet-3w.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet1.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet9f-rev03.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-inet97fv2.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-itead-iteaduino-plus.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-jesurun-q5.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-marsboard.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mk802.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-mk802ii.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-olinuxino-lime.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pcduino.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pcduino2.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10-pov-protab2-ips9.dts ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun4i-a10.dtsi ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-auxtek-t003.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-auxtek-t004.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-mk802.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-olinuxino-micro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-r7-tv-dongle.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s-wobo-i5.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a10s.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-ampe-a76.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun5i-a13-difrnce-dit4350.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun5i-a13-empire-electronix-d709.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-empire-electronix-m712.dts sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet 2016-08-26 16:58:36 +02:00
sun5i-a13-hsg-h702.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-inet-86vs.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun5i-a13-inet-98v-rev2.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-olinuxino-micro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13-q8-tablet.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun5i-a13-utoo-p66.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-a13.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-gr8-chip-pro.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-gr8.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-q8-common.dtsi sunxi: Sync dts files with the upstream kernel 2016-03-23 22:04:13 +01:00
sun5i-r8-chip.dts ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-r8.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun5i.dtsi ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-app4-evb1.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-colombus.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-hummingbird.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-i7.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-m9.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-mele-a1000g-quad.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31-mixtile-loftq.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
sun6i-a31.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-colorfly-e708-q1.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun6i-a31s-cs908.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-inet-q972.dts sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB 2016-08-26 16:58:36 +02:00
sun6i-a31s-primo81.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sina31s-core.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sina31s.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-sinovoip-bpi-m2.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s-yones-toptech-bs1078-v2.dts ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-a31s.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun6i-reference-design-tablet.dtsi ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun7i-a20-ainol-aw1.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapi-m1-plus.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapi.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-bananapro.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-cubieboard2.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-cubietruck.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-hummingbird.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-i12-tvbox.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-icnova-swac.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-itead-ibox.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-lamobo-r1.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-m3.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-m5.dts ARM: dts: a20-m5: Enable AHCI 2019-04-17 14:34:45 +05:30
sun7i-a20-mk808c.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som-evb-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som-evb.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som204-evb-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olimex-som204-evb.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime2-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-lime2.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-micro-emmc.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-olinuxino-micro.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-orangepi-mini.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-orangepi.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-pcduino3-nano.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-pcduino3.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-primo73.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-wexler-tab7200.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI 2019-04-17 14:34:45 +05:30
sun7i-a20-wits-pro-a20-dkt.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20-yones-toptech-bd1078.dts arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun7i-a20.dtsi arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-a23-a33.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-evb.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-gt90h-v4.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-inet86dz.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-polaroid-mid2407pxe03.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-polaroid-mid2809pxe04.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23-q8-tablet.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a23.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-ga10h-v1.1.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-inet-d978-rev2.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-olinuxino.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33-q8-tablet.dts sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sun8i-a33-sinlinx-sina33.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a33.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-a83t-allwinner-h8homlet-v2.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-bananapi-m3.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-cubietruck-plus.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t-tbs-a711.dts ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-a83t.dtsi ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3 2018-08-13 13:07:35 +05:30
sun8i-h2-plus-bananapi-m2-zero.dts sunxi: add support for Banana Pi M2 Zero board 2018-10-31 12:13:02 +05:30
sun8i-h2-plus-libretech-all-h3-cc.dts sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. 2018-05-01 10:15:58 +05:30
sun8i-h2-plus-orangepi-r1.dts sun8i: h2: Add initial Orange Pi R1 support 2018-06-16 14:52:42 +05:30
sun8i-h2-plus-orangepi-zero.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-bananapi-m2-plus.dts sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1 2019-02-18 13:54:23 +05:30
sun8i-h3-beelink-x2.dts sun8i: h3: Add support for the Beelink-x2 STB 2019-07-15 12:25:32 +05:30
sun8i-h3-libretech-all-h3-cc.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi-m1-plus.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi-m1.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi-neo-air.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi-neo.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-nanopi.dtsi sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-2.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-lite.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-one.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-pc-plus.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-pc.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-plus.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3-orangepi-plus2e.dts sunxi: DT: H3: update board .dts files from Linux 2018-07-16 12:03:16 +05:30
sun8i-h3.dtsi sunxi: H3/H5: Update .dts files 2018-11-13 22:06:08 +05:30
sun8i-q8-common.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-bananapi-m2m.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-nintendo-nes-classic-edition.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r16-parrot.dts ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-r40-bananapi-m2-ultra.dts arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-r40.dtsi arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sun8i-reference-design-tablet.dtsi ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 2018-09-28 22:09:24 +05:30
sun8i-v3s-licheepi-zero.dts sunxi: add support for Lichee Pi Zero 2017-04-21 09:29:35 +02:00
sun8i-v3s.dtsi sunxi: add DTSI file for V3s 2017-04-21 09:23:27 +02:00
sun8i-v40-bananapi-m2-berry.dts ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI 2019-04-17 14:34:45 +05:30
sun9i-a80-cubieboard4.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80-cx-a99.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80-optimus.dts ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun9i-a80.dtsi ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3 2019-01-18 22:19:09 +05:30
sun50i-a64-amarula-relic.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-bananapi-m64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-nanopi-a64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-oceanic-5205-5inmfd.dts sun50i: a64: Add Oceanic 5205 5inMFD initial support 2019-04-10 15:25:38 +05:30
sun50i-a64-olinuxino.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-orangepi-win.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-pine64-lts.dts sunxi: A64: Add Pine64-LTS board 2018-11-13 22:06:08 +05:30
sun50i-a64-pine64-plus.dts sunxi: DT: A64: update board .dts files from Linux 2018-07-16 12:02:41 +05:30
sun50i-a64-pine64.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-pinebook-u-boot.dtsi sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi 2019-01-30 18:22:18 +05:30
sun50i-a64-pinebook.dts sunxi: DT: add support for Pinebook 2018-11-13 22:10:03 +05:30
sun50i-a64-sopine-baseboard.dts sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-sopine.dtsi sunxi: A64: Update .dts/.dtsi files 2018-11-13 22:06:08 +05:30
sun50i-a64-teres-i-u-boot.dtsi sun50i: a64: Add Olimex A64-Teres-I board initial support 2019-05-09 00:44:13 +05:30
sun50i-a64-teres-i.dts sun50i: a64: Add Olimex A64-Teres-I board initial support 2019-05-09 00:44:13 +05:30
sun50i-a64.dtsi sunxi: A64: Re-add syscon to DT node 2018-11-13 22:06:08 +05:30
sun50i-h5-bananapi-m2-plus.dts sunxi: Add Bananapi M2+ H5 board 2019-02-18 14:46:53 +05:30
sun50i-h5-emlid-neutis-n5-devboard.dts board: sun50i-h5: Add Emlid Neutis N5 support 2019-01-18 22:19:08 +05:30
sun50i-h5-emlid-neutis-n5.dtsi board: sun50i-h5: Add Emlid Neutis N5 support 2019-01-18 22:19:08 +05:30
sun50i-h5-libretech-all-h3-cc.dts sunxi: DT: H5: update board .dts files from Linux 2018-07-16 12:03:05 +05:30
sun50i-h5-nanopi-neo-plus2.dts sunxi: DT: H5: update board .dts files from Linux 2018-07-16 12:03:05 +05:30
sun50i-h5-nanopi-neo2.dts sunxi: DT: H5: update board .dts files from Linux 2018-07-16 12:03:05 +05:30
sun50i-h5-orangepi-pc2.dts sunxi: H3/H5: Update .dts files 2018-11-13 22:06:08 +05:30
sun50i-h5-orangepi-prime.dts sunxi: DT: H5: update board .dts files from Linux 2018-07-16 12:03:05 +05:30
sun50i-h5-orangepi-zero-plus.dts sunxi: H3/H5: Update .dts files 2018-11-13 22:06:08 +05:30
sun50i-h5-orangepi-zero-plus2.dts sunxi: DT: H5: update board .dts files from Linux 2018-07-16 12:03:05 +05:30
sun50i-h5.dtsi sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs 2018-07-16 12:02:54 +05:30
sun50i-h6-beelink-gs1.dts arm: dts: h6: Add Beelink GS1 initial support 2019-04-18 22:14:34 +05:30
sun50i-h6-orangepi-lite2.dts board: allwinner: sun50i-h6: Add Orangepi Lite2 support 2018-11-13 22:13:09 +05:30
sun50i-h6-orangepi-one-plus.dts arm64: allwinner: h6: Add common orangepi nodes into dtsi 2018-11-13 22:13:01 +05:30
sun50i-h6-orangepi.dtsi arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux 2019-04-14 22:32:32 +05:30
sun50i-h6-pine-h64.dts arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux 2019-04-14 22:32:32 +05:30
sun50i-h6.dtsi arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux 2019-04-14 22:32:32 +05:30
sunxi-bananapi-m2-plus.dtsi sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1 2019-02-18 13:54:23 +05:30
sunxi-common-regulators.dtsi sunxi: dts: Sync with kernel 2015-08-14 08:37:36 +02:00
sunxi-h3-h5.dtsi sunxi: H3/H5: Update .dts files 2018-11-13 22:06:08 +05:30
sunxi-itead-core-common.dtsi arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2 2019-04-17 14:34:45 +05:30
sunxi-libretech-all-h3-cc.dtsi sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards 2018-07-17 21:07:34 +05:30
sunxi-q8-common.dtsi sunxi: Sync dts files with the upstream kernel 2016-03-23 22:04:13 +01:00
sunxi-reference-design-tablet.dtsi sunxi: Sync dts files with upstream kernel 2016-08-26 16:58:36 +02:00
sunxi-u-boot.dtsi arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1 2019-01-30 18:22:18 +05:30
tegra-u-boot.dtsi binman: Rename 'position' to 'offset' 2018-08-01 16:30:06 -06:00
tegra20-colibri.dts apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies 2017-08-15 14:51:18 -07:00
tegra20-harmony.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra20-medcom-wide.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-paz00.dts ARM: dts: tegra: Sync paz00 with Linux 4.8 2017-01-03 10:34:13 -07:00
tegra20-plutux.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-seaboard.dts ARM: tegra: fix ULPI PHY on Ventana and Seaboard 2016-09-27 09:11:03 -07:00
tegra20-tamonten.dtsi tegra: dts: Sync tegra20.dtsi with Linux v4.4 2016-02-16 09:17:51 -07:00
tegra20-tec.dts mmc: tegra: use correct alias for SDHCI/MMC nodes 2016-09-27 09:11:01 -07:00
tegra20-trimslice.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra20-u-boot.dtsi arm: tegra: Restore host1x/dc dm-pre-reloc properties 2018-08-21 08:34:55 -07:00
tegra20-ventana.dts ARM: tegra: fix USB controller aliases 2016-09-27 09:11:03 -07:00
tegra20.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-apalis.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-beaver.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-cardhu.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra30-colibri.dts apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies 2017-08-15 14:51:18 -07:00
tegra30-tamonten.dtsi ARM: tegra: pull Tegra30 SoC DT from Linux v4.7 2016-09-27 09:11:02 -07:00
tegra30-tec-ng.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra30-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra30.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra114-dalmore.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra114-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra114.dtsi ARM: tegra: pull Tegra114 SoC DT from Linux v4.7 2016-09-27 09:11:02 -07:00
tegra124-apalis.dts apalis-tk1: support v1.2 hardware revision 2019-08-09 10:01:35 -07:00
tegra124-cei-tk1-som.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra124-jetson-tk1.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra124-nyan-big-u-boot.dtsi nyan-big: change spi delay 2019-02-20 09:01:44 -07:00
tegra124-nyan-big.dts tegra: dts: Move stdout-path to /chosen 2017-07-28 12:02:47 -06:00
tegra124-nyan.dtsi ARM: tegra: enable ums on nyan boards 2019-02-20 09:01:44 -07:00
tegra124-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra124-venice2.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra124.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000-000.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000-500.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra186-p2771-0000.dtsi ARM: tegra: Mark built-in Ethernet as default on Jetson TX2 2019-06-05 09:16:35 -07:00
tegra186.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra210-e2220-1170.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-p2371-0000.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-p2371-2180.dts ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
tegra210-p2571.dts tegra: fdt: Ensure that the console UART is enabled 2017-07-11 10:08:20 -06:00
tegra210-u-boot.dtsi binman: tegra: Convert to use binman 2017-12-12 19:53:45 -07:00
tegra210.dtsi ARM: tegra: Rename pcie-controller to pcie 2019-06-05 09:16:35 -07:00
thunderx-88xx.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
thunderx-88xx.dtsi SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
tps6507x.dtsi arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5 2017-09-29 10:52:20 -04:00
tps65217.dtsi am33xx/omap: Enable CONFIG_OF_CONTROL 2014-06-11 16:25:46 -04:00
tps65910.dtsi am33xx: Update DT files, add am335x_gp_evm_config target 2015-08-12 20:48:06 -04:00
twl4030.dtsi omap3: Copy twl4030 device tree from Linux 4.9.y stable 2017-05-09 20:35:36 -04:00
twl4030_omap3.dtsi omap3: Copy twl4030 device tree from Linux 4.9.y stable 2017-05-09 20:35:36 -04:00
ulcb.dtsi ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0 2019-04-09 18:19:10 +02:00
uniphier-ld4-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld4.dtsi ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-ld6b-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld6b.dtsi ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld11-global.dts ARM: dts: uniphier: sync DT with Linux 4.19-rc1 2018-09-11 20:37:16 +09:00
uniphier-ld11-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-ld11.dtsi arm64: dts: uniphier: add reserved-memory for secure memory 2019-07-10 22:41:50 +09:00
uniphier-ld20-global.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-ld20-ref.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-ld20.dtsi arm64: dts: uniphier: add reserved-memory for secure memory 2019-07-10 22:41:50 +09:00
uniphier-pinctrl.dtsi ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-pro4-ace.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-pro4-ref.dts mmc: uniphier-sd: sync with Linux 2018-09-11 20:37:18 +09:00
uniphier-pro4-sanji.dts ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-pro4.dtsi ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-pro5-4kbox.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
uniphier-pro5.dtsi ARM: uniphier: dts: sync with Linux 4.20 2018-12-29 11:50:30 +09:00
uniphier-pxs2-gentil.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-pxs2-vodka.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-pxs2.dtsi ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-pxs3-ref.dts ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-pxs3.dtsi arm64: dts: uniphier: add reserved-memory for secure memory 2019-07-10 22:41:50 +09:00
uniphier-ref-daughter.dtsi ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-sld8-ref.dts ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-sld8.dtsi ARM: dts: uniphier: sync with Linux 5.1-rc4 2019-04-17 07:22:23 +09:00
uniphier-support-card.dtsi ARM: dts: uniphier: sync DT with Linux 4.17-rc1 2018-04-18 23:34:36 +09:00
uniphier-v7-u-boot.dtsi ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock node 2018-04-24 00:35:34 +09:00
usb_a9263.dts at91: fix devicetree warnings 2018-09-10 20:48:18 -04:00
versal-mini-emmc0.dts arm64: versal: Add mini eMMC configuration 2019-02-14 14:31:09 +01:00
versal-mini-emmc1.dts arm64: versal: Add mini eMMC configuration 2019-02-14 14:31:09 +01:00
versal-mini.dts arm64: versal: Add mini configuration for Versal 2019-02-14 14:31:10 +01:00
vexpress-v2m-rs1.dtsi arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2m.dtsi arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca5s.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca9.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vexpress-v2p-ca15_a7.dts arm: dts: add missing vexpress device trees 2019-04-26 18:58:22 -04:00
vf-colibri-u-boot.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf-colibri.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf.dtsi ARM: dts: colibri_vf: Add dcu0 node 2019-07-29 00:09:19 +02:00
vf500-colibri.dts ARM: dts: colibri_vf: update device trees 2019-04-13 20:30:09 +02:00
vf610-bk4r1-u-boot.dtsi ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties 2019-04-13 20:30:08 +02:00
vf610-bk4r1.dts ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-colibri.dts ARM: dts: colibri_vf: update device trees 2019-04-13 20:30:09 +02:00
vf610-pcm052.dts ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-pcm052.dtsi ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) 2019-04-13 20:30:08 +02:00
vf610-pinfunc.h vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions 2019-04-13 20:30:08 +02:00
vf610-twr.dts SPDX: Convert all of our multiple license tags to Linux Kernel style 2018-05-07 10:24:31 -04:00
zynq-7000.dtsi ARM: dts: Use mmc@ instead sdhci@ 2019-02-15 15:04:00 +01:00
zynq-cc108.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-cse-nand.dts arm: zynq: Fix indentation for zynq-cse targets 2018-08-06 08:44:35 +02:00
zynq-cse-nor.dts arm: zynq: Fix indentation for zynq-cse targets 2018-08-06 08:44:35 +02:00
zynq-cse-qspi-single.dts ARM: zynq: Align model name with DT 2019-10-08 09:41:27 +02:00
zynq-cse-qspi.dtsi arm: zynq: cse_qspi: Fix overwriting spi-rx-bus-width property 2018-11-26 10:50:54 +01:00
zynq-dlc20-rev1.0.dts arm: zynq: Add support for DLC20 board 2018-10-16 14:58:45 +02:00
zynq-microzed.dts ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards 2019-02-15 15:04:00 +01:00
zynq-minized.dts arm: zynq: Add initial support for Avnet MiniZed 2018-05-31 13:50:39 +02:00
zynq-picozed.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-syzygy-hub.dts ARM: zynq: Convert Syzygy to DM_I2C 2019-02-14 14:31:10 +01:00
zynq-topic-miami.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-topic-miamilite.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-topic-miamiplus.dts topic-miamiplus: Run CPU at 800MHz for speedgrade-2 2019-01-24 10:03:45 +01:00
zynq-zc702.dts ARM: zynq: dts: Added alias for usb node 2019-10-08 09:41:27 +02:00
zynq-zc706.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zc770-xm010.dts xilinx: dts: Remove additional empty lines 2019-02-15 15:04:01 +01:00
zynq-zc770-xm011-x16.dts arm: zynq: Add support for zc770-xm011-x16 configuration 2018-01-30 14:28:25 +01:00
zynq-zc770-xm011.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zc770-xm012.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zc770-xm013.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynq-zed.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynq-zturn.dts arm: zynq: Drop #address-cells and #size-cells from gpio-keys 2018-06-15 08:06:31 +02:00
zynq-zybo-z7.dts arm: zynq: add support for the zybo z7 board 2018-08-06 08:44:35 +02:00
zynq-zybo.dts ARM: dts: zynq: correct and improve the model property of dt files 2019-02-15 15:04:00 +01:00
zynqmp-a2197-g-revA.dts arm64: zynqmp: Add System Controller for a2197-g/p 2019-10-08 09:55:11 +02:00
zynqmp-a2197-m-revA.dts arm64: zynqmp: Add a2197 memory board revA 2019-10-08 09:55:11 +02:00
zynqmp-a2197-p-revA.dts arm64: zynqmp: Add System Controller for a2197-g/p 2019-10-08 09:55:11 +02:00
zynqmp-a2197-revA.dts arm64: zynqmp: Add generic a2197 system controller config 2019-10-08 09:55:11 +02:00
zynqmp-clk-ccf.dtsi arm64: zynqmp: Add TTC clocks 2018-05-31 13:50:39 +02:00
zynqmp-clk.dtsi arm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 node 2019-10-08 09:11:14 +02:00
zynqmp-mini-emmc0.dts arm64: zynqmp: Fix sdhci clock in emmc0 mini configuration 2018-11-29 10:30:02 +01:00
zynqmp-mini-emmc1.dts arm64: zynqmp: Reflect emmc controller ID in model in DT 2018-11-26 10:50:55 +01:00
zynqmp-mini-nand.dts SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynqmp-mini-qspi.dts arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatible 2019-10-08 09:41:27 +02:00
zynqmp-mini.dts arm64: zynqmp: Add mini mtest configuration 2018-11-30 10:45:26 +01:00
zynqmp-r5.dts arm: zynqmp: Add ZynqMP minimal R5 support 2018-05-11 09:38:23 +02:00
zynqmp-zc1232-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1254-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1751-xm015-dc1.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1751-xm016-dc2.dts arm64: zynqmp: Fix spi flash partition definition for zc1751 dc2 2018-04-09 12:14:48 +02:00
zynqmp-zc1751-xm017-dc3.dts arm64: zynqmp: Add support for zc1751 dc3 2018-04-09 12:14:52 +02:00
zynqmp-zc1751-xm018-dc4.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zc1751-xm019-dc5.dts arm64: zynqmp: Update sd properties for dc5 2018-04-09 12:14:48 +02:00
zynqmp-zcu100-revC.dts xilinx: dts: Remove additional empty lines 2019-02-15 15:04:01 +01:00
zynqmp-zcu102-rev1.0.dts arm64: zynqmp: Remove double spaces from dts file 2018-04-09 12:14:49 +02:00
zynqmp-zcu102-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zcu102-revB.dts arm64: zynqmp: Remove additional comments from dts files 2018-04-09 12:14:48 +02:00
zynqmp-zcu104-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zcu104-revC.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zcu106-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zcu111-revA.dts dts: switch spi-flash to jedec, spi-nor compatible 2019-04-12 10:54:27 +05:30
zynqmp-zcu1275-revA.dts arm64: zynqmp: Rename zc1275 to zcu1275 2019-07-30 10:20:06 +02:00
zynqmp-zcu1275-revB.dts arm64: zynqmp: Rename zc1275 to zcu1275 2019-07-30 10:20:06 +02:00
zynqmp.dtsi arm64: zynqmp: add firmware and mailbox node to DT 2019-10-08 09:55:11 +02:00